IP Addressing: DHCP Configuration Guide, Cisco IOS XE Gibraltar 16.11.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
The DHCP Relay Server ID Override and Link Selection Option 82 Suboptions feature enables the relay agent to be part of all
Dynamic Host Configuration Protocol (DHCP) message exchanges by supporting the use of two suboptions of the relay agent information
option (option 82). This design allows DHCPv4 to operate in networks where direct communication between the client and server
is not possible or desired. These two suboptions used together enable the deployment of an architecture where having all DHCP
traffic flow through the relay agent is desirable, allowing for greater control of DHCP communications.
This feature also introduces the capability to manually configure the interface for the relay agent to use as the source
IP address for messages relayed to the DHCP server. This configuration allows the network administrator to specify a stable,
hardware-independent IP address (such as a loopback interface).
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information,
see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module,
and to see a list of the releases in which each feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature
Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Restrictions for DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
If the DHCP Relay Server ID Override and Link Selection Option 82 Suboptions feature and the DHCP Relay MPLS VPN Support
feature are both configured, the DHCP Relay MPLS VPN Support feature takes precedence.
Information About DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
Server ID Override Suboption
The server identifier (ID) override suboption allows the DHCP relay agent to specify a new value for the server ID option,
which is inserted by the Dynamic Host Configuration Protocol (DHCP) server in the reply packet. This suboption allows the
DHCP relay agent to act as the actual DHCP server such that the renew requests will come to the relay agent rather than the
DHCP server directly. The server ID override suboption contains the incoming interface IP address, which is the IP address
on the relay agent that is accessible from the client. The DHCP client uses this information to send all renew and release
request packets to the relay agent. The relay agent adds all of the appropriate suboptions and then forwards the renew and
release request packets to the original DHCP server.
Link Selection Suboption
The link selection suboption provides a mechanism to separate the subnet/link on which the DHCP client resides from the the
gateway address (giaddr), which can be used to communicate with the relay agent by the DHCP server. The relay agent will set
the suboption to the correct subscriber subnet and the DHCP server will use that value to assign an IP address rather than
the giaddr value. The relay agent will set the giaddr to its own IP address so that DHCP messages are routable over the network.
DHCP Relay Server ID Override and Link Selection Option 82 Suboptions Feature Design
The Dynamic Host Configuration Protocol (DHCP) IPv4 deployment model assumes a single routing domain between the DHCP client
and DHCP server. In some network designs, the DHCP server cannot directly communicate with DHCP clients. Customers may choose
this design to make critical infrastructure servers inaccessible and to protect the DHCP server from client attacks.
Relay agents are used to forward requests and replies between clients and servers when they are not on the same physical
subnet. In all cases, the DHCP relay agent must be able to communicate directly with both the DHCP server and DHCP client.
By using the relay agent information option (option 82), the DHCP relay agent can include additional information about itself
when forwarding client-originated DHCP packets to a DHCP server.
The DHCP Relay Server ID Override and Link Selection Option 82 Suboptions feature enables the relay agent to be part of all
DHCP message exchanges by supporting the use of two suboptions of option 82: server ID override and link selection. This design
results in all DHCP messages flowing through the relay agent, allowing for greater control of DHCP communications.
Communication from the DHCP server through the relay agent can be an issue. If the server needs to reach the client, it must
do so through the relay agent. The IP address of the relay agent might not be ideal. For example, if the network is renumbered
or if the interface at the relay agent is down for some reason, the server may not be able to reach the client. This feature
introduces the capability to manually configure the interface for the relay agent to use as the source IP address for messages
relayed to the DHCP server. This configuration allows the network administrator to specify a stable, hardware-independent
IP address (such as a loopback interface).
The figure and the numbered list that follows it shows the processing that occurs on the DHCP relay agent and DHCP server
when this feature is configured.
Figure 1. DHCP Relay Agent and DHCP Server Processing of Option 82 Suboptions
The DHCP client generates a DHCP request and broadcasts it on the network.
The DHCP relay agent intercepts the broadcast DHCP request packet and inserts a server ID override suboption and link selection
suboption to its relay agent information option in the DHCP packet. The server ID override and link selection suboptions contain
the incoming interface IP address, which is the IP address on the relay agent that is accessible from the client (10.1.1.1
in this case).
The relay agent sets the gateway IP address (giaddr) to the IP address of an interface that is reachable by the DHCP server
(typically the server-facing interface that will be used to transmit the message, 10.3.1.2 in this case).
If the source interface is explicitly configured on a loopback interface (using the
ip dhcp-relay source-interface command), the relay agent will use that address as the source IP address (giaddr) for messages relayed to the DHCP server
(10.2.1.1 in this case).
The following processing occurs on the DHCP server after receiving the forwarded packets from the relay agent:
The DHCP server uses the link selection suboption to locate the correct address pools for the DHCP client.
The DHCP server sets the server ID option to the value specified by the server ID override suboption of the DHCP packet.
The DHCP server sends the reply message to the IP address specified in the giaddr.
The DHCP client will see the relay agent address as the server ID and use that address when unicasting RENEW messages.
How to Configure Support for the DHCP Relay Server ID Override and Link Selection Suboptions
Configuring the DHCP Relay Agent to Insert the DHCP Server ID Override and Link Selection Suboptions into Option 82
Note
If the DHCP Relay Server ID Override and Link Selection Option 82 Suboptions feature and the DHCP Relay MPLS VPN Support feature
are both configured, the DHCP Relay MPLS VPN Support feature takes precedence.
SUMMARY STEPS
enable
configure terminal
ip dhcp-relay information option server-override
ip dhcp-relay source-interface typenumber
interface typenumber
ip dhcp relay information option server-id-override
ip dhcp relay source-interface typenumber
end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Device> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Device# configure terminal
Enters global configuration mode.
Step 3
ip dhcp-relay information option server-override
Example:
Device(config)# ip dhcp-relay information option server-override
Enables the system to globally insert the server ID override and link selection suboptions into the DHCP relay agent information
option in forwarded BOOTREQUEST messages to a Dynamic Host Configuration Protocol (DHCP) server.
If the
ip dhcp relay information option server-id-override command is configured on an interface, it overrides the global configuration on that interface only.
Step 4
ip dhcp-relay source-interface typenumber
Example:
Device(config)# ip dhcp-relay source-interface loopback 0
(Optional) Globally configures the source interface for the relay agent to use as the source IP address for relayed messages.
This command allows the network administrator to specify a stable, hardware-independent IP address (such as a loopback interface).
If the
ip dhcp relay source-interface command is configured on an interface, it overrides the global configuration on that interface only.
Step 5
interface typenumber
Example:
Device(config)# interface GigabitEthernet 0/0/0
(Optional) Configures an interface and enters interface configuration mode.
Step 6
ip dhcp relay information option server-id-override
Example:
Device(config-if)# ip dhcp relay information option server-id-override
(Optional) Enables the system to insert the server ID override and link selection suboptions on a specific interface into
the DHCP relay agent information option in forwarded BOOTREQUEST messages to a DHCP server.
Step 7
ip dhcp relay source-interface typenumber
Example:
Device(config-if)# ip dhcp relay source-interface loopback 2
(Optional) Configures the source interface for the relay agent to use as the source IP address for relayed messages.
Step 8
end
Example:
Device(config-if)# end
Exits interface configuration mode and returns to privileged EXEC mode.
Configuration Examples for DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
Example: DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
In the following example, the IP address of the loopback interface is used as the source IP address for relayed messages.
The client initiates IP address negotiation from GigabitEthernet interface 0/0/0. The Dynamic Host Configuration Protocol
(DHCP) relay agent is configured globally to insert the server ID override suboption and link selection suboption into the
relay agent information option of the DHCP packet. The relay agent uses the server ID override suboption to force the DHCP
server to use that value as the server ID in the DHCP message. The DHCP server uses the link selection suboption to determine
from which subnet to assign an IP address.
DHCP Client
interface GigabitEthernet 0/0/0
ip address dhcp
DHCP Relay Agent
ip dhcp-relay information option server-override
ip dhcp-relay source-interface loopback 0
!
interface Loopback0
ip address 10.2.1.1 255.255.255.0
!
interface GigabitEthernet 0/0/0
ip address 10.1.1.1 255.255.255.0
ip helper-address 10.3.1.1
!
interface GigabitEthernet 1/0/0
ip address 10.3.1.2 255.255.255.0
DHCP Server
ip dhcp excluded-address 10.3.0.1
ip dhcp pool pool1
network 10.1.1.0 255.255.255.0
lease 0 0 1
!
interface GigabitEthernet 0/0/0
ip address 10.3.1.1 255.255.255.0
Additional References for DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
DHCP server configuration tasks, examples, and conceptual information
Configuring the Cisco IOS DHCP Server
DHCP relay agent configuration tasks, examples, and conceptual information
Configuring the Cisco IOS DHCP Relay Agent
Standards and RFCs
Standard/RFC
Title
RFC 3527
Link Selection Suboption
RFC 5107
DHCP Server Identifier Override Suboption
Technical Assistance
Description
Link
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use
these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products
and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.
Feature Information for
DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
The following table provides release information about the feature or features described in this module. This table lists
only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco
Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for
DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
Feature
Name
Releases
Feature
Configuration Information
DHCP
Relay Server ID Override and Link Selection Option 82 Suboptions
Cisco IOS XE Release 2.1
Cisco IOS XE Release 3.9S
The DHCP
Relay Server ID Override and Link Selection Option 82 Suboptions feature
enables the relay agent to be part of all Dynamic Host Configuration Protocol
(DHCP) message exchanges by supporting the use of two suboptions of the relay
agent information option (option 82). This design allows DHCPv4 to operate in
networks where direct communication between the client and server is not
possible or desired. These two suboptions used together enable the deployment
of an architecture where having all DHCP traffic flow through the relay agent
is desirable, allowing for greater control of DHCP communications.
The
following commands were introduced or modified:
ip dhcp relay information
option server-id-override, ip dhcp relay source-interface, ip dhcp-relay
information option server-override, ip dhcp-relay
source-interface.
Glossary
client —A host trying to configure its interface (obtain an IP address) using DHCP or BOOTP protocols.
DHCP —Dynamic Host Configuration Protocol.
DHCP options and suboptions —Configuration parameters and other control information are carried in tagged data items that are stored in the options field
of the DHCP message. Options provide a method of appending additional information. Vendors that want to provide additional
information to their client not designed into the protocol can use options.
giaddr —Gateway IP address field of the DHCP packet. The giaddr provides the DHCP server with information about the IP address subnet
in which the client resides. The giaddr also provides the DHCP server with an IP address where the DHCP response messages
can be sent.
relay agent —A router that forwards DHCP and BOOTP messages between a server and a client on different subnets.
Feedback