O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.
A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.
Este documento descreve como coletar a saída CLI dos comandos xconfig e xstatus da série VCS (Video Communication Server) e Expressway Series dos dispositivos VCS-Control, VCS-Expressway, Expressway-C e Expressway-E, que o Cisco Technical Assistance Center (TAC) ocasionalmente precisa recuperar.
A Cisco recomenda que você tenha conhecimento destes tópicos:
As informações neste documento são baseadas nestas versões de software e hardware:
Note: Este artigo pressupõe que você tenha um cabo de console serial físico funcional conectado. Você deve ter recebido um com seu dispositivo.
Aqui está um exemplo das configurações que você deve configurar para acesso de console serial em PuTTY.
Note: Você precisará ajustar a porta Comunicação (COM) com base na forma como o console está conectado ao seu PC.
Uma alternativa mais simples é o SSH no dispositivo.
Caution: Como este é um ambiente de laboratório, os alarmes podem ser ignorados. Se os alarmes forem vistos em um ambiente de produção, eles devem ser abordados o mais rápido possível.
Na versão de software do x8.2, o xconfiguration e o xstatus são agora incluídos quando um log de diagnóstico é realizado.
Note: Este método também contém o logging snapshot.txt que registra mensagens em resposta às atividades que ocorrem no VCS ou na Série Expressway no momento.
Aqui está um exemplo de como a saída xstatus e xconfig se parece no arquivo de texto salvo com as configurações de registro:
xstatus
*s SystemUnit:
Product: "TANDBERG VCS"
Uptime: 24963390
SystemTime: "2014-06-19 14:58:59"
TimeZone: "US/Eastern"
LocalTime: "2014-06-19 10:58:59"
Software:
Version: "X7.2.1"
Build: "296181"
Name: "s42700"
ReleaseDate: "2012-09-25"
ReleaseKey: "****************"
Configuration:
NonTraversalCalls: 500
TraversalCalls: 200
Registrations: 2500
Expressway: False
Encryption: True
Interworking: True
FindMe: True
DeviceProvisioning: True
DualNetworkInterfaces: False
AdvancedAccountSecurity: False
StarterPack: False
EnhancedOCSCollaboration: True
Hardware:
Version: "VMWare"
SerialNumber: "********"
*s/end
*s Ethernet 1:
MacAddress: "00:50:56:A1:70:06"
Speed: 10000full
IPv4:
Address: "10.10.10.10"
SubnetMask: "255.255.255.0"
*s/end
*s Ethernet 2:
MacAddress: "00:50:56:A1:70:04"
Speed: 10000full
IPv4:
Address: "192.168.0.100"
SubnetMask: "255.255.255.0"
*s/end
*s Options:
Option 1:
Key: "116341X300-1-!!!!!!!!"
Description: "300 Non-traversal Calls"
Option 2:
Key: "116341P00-1-!!!!!!!!"
Description: "Device Provisioning"
Option 3:
Key: "116341G00-1-!!!!!!!!!"
Description: "H323-SIP Interworking Gateway"
Option 4:
Key: "116341U00-1-!!!!!!!!!"
Description: "FindMe"
Option 5:
Key: "116341C00-1-!!!!!!!!!"
Description: "Enhanced OCS Collaboration"
Option 8:
Key: "116341Y200-1-!!!!!!!!"
Description: "200 Traversal Calls"
Option 9:
Key: "116341X200-1-!!!!!!!!"
Description: "200 Non-traversal Calls"
*s/end
*s IP:
Protocol: IPv4
IPv4:
Gateway: "10.10.10.1"
*s/end
*s ExternalManager:
Status: Active
Address: "10.10.10.104"
Protocol: HTTP
URL: "tms/public/external/management/systemmanagementservice.asmx"
*s/end
*s Feedback 1:
Status: Off
*s/end
*s Feedback 2:
Status: Off
*s/end
*s Feedback 3:
Status: On
URL: "http://10.10.10.104/tms/public/feedback/code.aspx"
Expression: "/Event/CallDisconnected"
Expression: "/Event/CallConnected"
Expression: "/Event/CallFailure"
Expression: "/Event/RegistrationAdded"
Expression: "/Event/RegistrationChanged"
Expression: "/Event/ResourceUsage"
Expression: "/Event/AuthenticationFailure"
Expression: "/Status/Warnings"
*s/end
*s ResourceUsage:
Calls:
Traversal:
Current: 0
Max: 0
Total: 0
NonTraversal:
Current: 0
Max: 1
Total: 2
Registrations:
Current: 0
Max: 3
Total: 42
*s/end
*s Calls: /
*s/end
*s Zones:
DefaultZone:
Name: "DefaultZone"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
LocalZone:
DefaultSubZone:
Name: "DefaultSubZone"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
TraversalSubZone:
Name: "TraversalSubZone"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
ClusterSubZone:
Name: "ClusterSubZone"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
Searches:
Current: 0
CurrentDirected: 0
Total: 64081
Dropped: 0
MaxSubSearchExceeded: 0
MaxTargetsExceeded: 0
Zone 1:
Name: "TraversalZone"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
Status: Active
Type: TraversalClient
TraversalClient:
Peer 1:
H323:
Status: Active
Address: "10.10.10.102"
Port: 6001
LastStatusChange: "2014-04-03 09:50:35"
SIP:
Status: Active
Address: "10.10.10.102"
Port: 7001
LastStatusChange: "2014-04-03 09:49:13"
Server: "TANDBERG/4102 (X7.0)"
*s/end
*s Alternates: /
*s/end
*s Links:
Link 1:
Name: "DefaultSZtoTraversalSZ"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
Link 2:
Name: "DefaultSZtoDefaultZ"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
Link 3:
Name: "DefaultSZtoClusterSZ"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
Link 4:
Name: "TraversalSZtoDefaultZ"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
Link 5:
Name: "Zone001ToTraversalSZ"
Bandwidth:
LocalUsage: 0
ClusterUsage: 0
*s/end
*s Pipes: /
*s/end
*s Registrations: /
*s/end
*s SIP:
Ethernet 1:
IPv4:
UDP:
Status: Inactive
TCP:
Status: Active
Address: "10.10.10.10:5060"
TLS:
Status: Active
Address: "10.10.10.10:5061"
IPv6:
UDP:
Status: Inactive
TCP:
Status: Inactive
TLS:
Status: Inactive
Ethernet 2:
IPv4:
UDP:
Status: Inactive
TCP:
Status: Inactive
TLS:
Status: Inactive
IPv6:
UDP:
Status: Inactive
TCP:
Status: Inactive
TLS:
Status: Inactive
Transport:
Server 19857:
Socket:
Type: "SERV_UDP"
State: "INUSE"
ID:
Local: 85393
Global: 0
Buffer:
Input:
Length: 20000
Output:
Length: 20000
Local:
Address: "127.0.0.1:5060"
Remote:
Address: ""
Network:
Number: 1
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: False
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19856:
Socket:
Type: "SERV_TCP"
State: "INUSE"
ID:
Local: 150928
Global: 1
Buffer:
Input:
Length: 0
Output:
Length: 0
Local:
Address: "127.0.0.1:5060"
Remote:
Address: ""
Network:
Number: 1
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: False
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19855:
Socket:
Type: "SERV_TLS"
State: "INUSE"
ID:
Local: 216463
Global: 2
Buffer:
Input:
Length: 0
Output:
Length: 0
Local:
Address: "127.0.0.1:5061"
Remote:
Address: ""
Network:
Number: 1
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: True
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19854:
Socket:
Type: "SERV_UDP"
State: "INUSE"
ID:
Local: 281998
Global: 3
Buffer:
Input:
Length: 20000
Output:
Length: 20000
Local:
Address: "[::1]:5060"
Remote:
Address: ""
Network:
Number: 1
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: False
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19853:
Socket:
Type: "SERV_TCP"
State: "INUSE"
ID:
Local: 347533
Global: 4
Buffer:
Input:
Length: 0
Output:
Length: 0
Local:
Address: "[::1]:5060"
Remote:
Address: ""
Network:
Number: 1
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: False
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19852:
Socket:
Type: "SERV_TLS"
State: "INUSE"
ID:
Local: 413068
Global: 5
Buffer:
Input:
Length: 0
Output:
Length: 0
Local:
Address: "[::1]:5061"
Remote:
Address: ""
Network:
Number: 1
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: True
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19851:
Socket:
Type: "SERV_TCP"
State: "INUSE"
ID:
Local: 478603
Global: 6
Buffer:
Input:
Length: 0
Output:
Length: 0
Local:
Address: "10.10.10.10:5060"
Remote:
Address: ""
Network:
Number: 2
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: False
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Server 19850:
Socket:
Type: "SERV_TLS"
State: "INUSE"
ID:
Local: 544138
Global: 7
Buffer:
Input:
Length: 0
Output:
Length: 0
Local:
Address: "10.10.10.10:5061"
Remote:
Address: ""
Network:
Number: 2
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: ""
Last:
Packet:
Received: 0
Close:
In: 20
Secure: True
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 0
Add:
Failures: 0
Flow:
Token: ""
Client 7747:
Socket:
Type: "TLS_OUTG"
State: "INUSE"
ID:
Local: 825433667
Global: 654
Buffer:
Input:
Length: 5120
Output:
Length: 20000
Local:
Address: "10.10.10.10:27573"
Remote:
Address: "10.10.10.102:7001"
Network:
Number: 2
Certificate:
Subject:
Name: ""
TLS:
Cipher:
Name: "DHE-RSA-AES256-SHA"
Last:
Packet:
Received: -1798628722
Close:
In: 900
Secure: True
X509:
Certificate:
Verified: False
Queue:
Max:
Size: 1
Add:
Failures: 0
Flow:
Token: ""
*s/end
*s H323:
Registration:
Status: Active
IPv4:
Address: "10.10.10.10:1719"
CallSignaling:
Status: Active
IPv4:
Address: "10.10.10.10:1720"
Assent:
CallSignaling:
Status: Inactive
H46018:
CallSignaling:
Status: Inactive
*s/end
*s Applications:
Presence:
UserAgent:
Status: Inactive
Presentity:
Count: 0
Server:
Subscriptions:
Count: 0
Max: 0
Expired: 0
Subscribers:
Count: 0
Max: 0
Status: Inactive
Presentities:
Count: 0
Max: 0
Publications:
Presentities:
Count: 0
Max: 0
ConferenceFactory:
Status: Inactive
NextAlias: ""
External 1:
Status:
ClusterStatus:
ClusterState: "Disabled"
LastUpdate:
Time: "Time not set"
SecondsSinceLastRefresh: "1403189939"
*s/end
*s FindMeManager: /
*s/end
*s TURN:
Server:
Status: Inactive
*s/end
*s Policy: /
*s/end
OK
xcommand xconfig
*c xConfiguration Login Remote Protocol: LDAP
*c xConfiguration Login Remote LDAP Server Address: ""
*c xConfiguration Login Remote LDAP Server FQDNResolution: AddressRecord
*c xConfiguration Login Remote LDAP Server Port: 389
*c xConfiguration Login Remote LDAP VCS BindUsername: ""
*c xConfiguration Login Remote LDAP VCS BindPassword: "{cipher}XXXXXXXXXX
XXXXXXXXXXXX"
*c xConfiguration Login Remote LDAP VCS BindDN: ""
*c xConfiguration Login Remote LDAP BaseDN Accounts: ""
*c xConfiguration Login Remote LDAP BaseDN Groups: ""
*c xConfiguration Login Remote LDAP Encryption: Off
*c xConfiguration Login Remote LDAP SASL: DIGEST-MD5
*c xConfiguration Login Remote LDAP CRLCheck: None
*c xConfiguration Login Remote LDAP DirectoryType: ActiveDirectory
*c xConfiguration SystemUnit Name: "VCS1-Control"
*c xConfiguration SystemUnit Maintenance Mode: Off
*c xConfiguration Option 1 Key: "116341X300-1-!!!!!!!!"
*c xConfiguration Option 2 Key: "116341P00-1-!!!!!!!!"
*c xConfiguration Option 3 Key: "116341G00-1-!!!!!!!!!"
*c xConfiguration Option 4 Key: "116341U00-1-!!!!!!!!!"
*c xConfiguration Option 5 Key: "116341C00-1-!!!!!!!!"
*c xConfiguration Option 8 Key: "116341Y200-1-!!!!!!!!"
*c xConfiguration Option 9 Key: "116341X200-1-!!!!!!!!"
*c xConfiguration Ethernet 1 Speed: Auto
*c xConfiguration Ethernet 1 IP V4 Address: "10.10.10.10"
*c xConfiguration Ethernet 1 IP V4 SubnetMask: "255.255.255.0"
*c xConfiguration Ethernet 1 IP V6 Address: ""
*c xConfiguration Ethernet 2 Speed: Auto
*c xConfiguration Ethernet 2 IP V4 Address: "192.168.0.100"
*c xConfiguration Ethernet 2 IP V4 SubnetMask: "255.255.255.0"
*c xConfiguration Ethernet 2 IP V6 Address: ""
*c xConfiguration IPProtocol: IPv4
*c xConfiguration IP Gateway: "10.10.10.1"
*c xConfiguration IP QoS Mode: None
*c xConfiguration IP QoS Value: 0
*c xConfiguration IP V6 Gateway: ""
*c xConfiguration IP DNS Domain Name: "######.local"
*c xConfiguration IP DNS Hostname: "VCS1-Control"
*c xConfiguration IP Ephemeral PortRange Start: 40000
*c xConfiguration IP Ephemeral PortRange End: 49999
*c xConfiguration IP RFC4821 Mode: Disabled
*c xConfiguration Administration Telnet Mode: Off
*c xConfiguration Administration SSH Mode: On
*c xConfiguration Administration HTTP Mode: On
*c xConfiguration Administration HTTPS Mode: On
*c xConfiguration Administration LCDPanel Mode: On
*c xConfiguration ExternalManager Address: "10.10.10.104"
*c xConfiguration ExternalManager Path: "tms/public/external/management/system
managementservice.asmx"
*c xConfiguration ExternalManager Protocol: HTTP
*c xConfiguration ExternalManager Server Certificate Verification Mode: On
*c xConfiguration Registration RestrictionPolicy Mode: None
*c xConfiguration Registration RestrictionPolicy Service Protocol: HTTP
*c xConfiguration Registration RestrictionPolicy Service TLS Verify Mode: On
*c xConfiguration Registration RestrictionPolicy Service TLS CRLCheck Mode: Off
*c xConfiguration Registration RestrictionPolicy Service Server 1 Address: ""
*c xConfiguration Registration RestrictionPolicy Service Server 2 Address: ""
*c xConfiguration Registration RestrictionPolicy Service Server 3 Address: ""
*c xConfiguration Registration RestrictionPolicy Service Path: ""
*c xConfiguration Registration RestrictionPolicy Service Status Path: "status"
*c xConfiguration Registration RestrictionPolicy Service UserName: ""
*c xConfiguration Registration RestrictionPolicy Service Password: "{cipher}
XXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Registration RestrictionPolicy Service DefaultCPL: "<reject
status='504' reason='Registration Policy Unavailable'/>"
*c xConfiguration Alternates ConfigurationMaster: 1
*c xConfiguration Alternates Cluster Name: ""
*c xConfiguration Alternates Peer 1 Address: ""
*c xConfiguration Alternates Peer 2 Address: ""
*c xConfiguration Alternates Peer 3 Address: ""
*c xConfiguration Alternates Peer 4 Address: ""
*c xConfiguration Alternates Peer 5 Address: ""
*c xConfiguration Alternates Peer 6 Address: ""
*c xConfiguration Transform 1 Description: "Transform destination aliases to
URI format"
*c xConfiguration Transform 1 State: Enabled
*c xConfiguration Transform 1 Priority: 1
*c xConfiguration Transform 1 Pattern String: "([^@]*)"
*c xConfiguration Transform 1 Pattern Type: Regex
*c xConfiguration Transform 1 Pattern Behavior: Replace
*c xConfiguration Transform 1 Pattern Replace: "\1@#####.local"
*c xConfiguration Call Loop Detection Mode: On
*c xConfiguration Call Routed Mode: Always
*c xConfiguration Call Services CallsToUnknownIPAddresses: Indirect
*c xConfiguration Call Services Fallback Alias: ""
*c xConfiguration H323 Mode: On
*c xConfiguration H323 Gatekeeper Registration UDP Port: 1719
*c xConfiguration H323 Gatekeeper Registration ConflictMode: Reject
*c xConfiguration H323 Gatekeeper CallSignaling TCP Port: 1720
*c xConfiguration H323 Gatekeeper CallSignaling PortRange Start: 15000
*c xConfiguration H323 Gatekeeper CallSignaling PortRange End: 19999
*c xConfiguration H323 Gatekeeper TimeToLive: 1800
*c xConfiguration H323 Gatekeeper CallTimeToLive: 120
*c xConfiguration H323 Gatekeeper AutoDiscovery Mode: On
*c xConfiguration H323 Gateway CallerId: ExcludePrefix
*c xConfiguration SIP Mode: On
*c xConfiguration SIP Domains Domain 1 Name: "######.com"
*c xConfiguration SIP Domains Domain 2 Name: "######.local"
*c xConfiguration SIP Routes Route 1 Method: "SUBSCRIBE"
*c xConfiguration SIP Routes Route 1 Request Line Pattern: ".*@(%localdomains%|
%ip%)"
*c xConfiguration SIP Routes Route 1 Header Name: "Event"
*c xConfiguration SIP Routes Route 1 Header Pattern: "(ua-profile|phonebook).*"
*c xConfiguration SIP Routes Route 1 Authenticated: Off
*c xConfiguration SIP Routes Route 1 Address: "127.0.0.1"
*c xConfiguration SIP Routes Route 1 Port: 22400
*c xConfiguration SIP Routes Route 1 Transport: TCP
*c xConfiguration SIP Routes Route 1 Tag: "Provisioning"
*c xConfiguration SIP Routes Route 2 Method: "INFO"
*c xConfiguration SIP Routes Route 2 Request Line Pattern: ".*@(%localdomains%|
%ip%)"
*c xConfiguration SIP Routes Route 2 Header Name: "Content-Type"
*c xConfiguration SIP Routes Route 2 Header Pattern: "application/tandberg-
phonebook\+xml"
*c xConfiguration SIP Routes Route 2 Authenticated: Off
*c xConfiguration SIP Routes Route 2 Address: "127.0.0.1"
*c xConfiguration SIP Routes Route 2 Port: 22400
*c xConfiguration SIP Routes Route 2 Transport: TCP
*c xConfiguration SIP Routes Route 2 Tag: "Phonebook"
*c xConfiguration SIP Registration Standard Refresh Strategy: Maximum
*c xConfiguration SIP Registration Standard Refresh Minimum: 45
*c xConfiguration SIP Registration Standard Refresh Maximum: 60
*c xConfiguration SIP Registration Outbound Refresh Strategy: Variable
*c xConfiguration SIP Registration Outbound Refresh Minimum: 300
*c xConfiguration SIP Registration Outbound Refresh Maximum: 3600
*c xConfiguration SIP Registration Outbound Flow Timer: 0
*c xConfiguration SIP Registration Proxy Mode: Off
*c xConfiguration SIP Registration Call Remove: No
*c xConfiguration SIP Session Refresh Value: 1800
*c xConfiguration SIP Session Refresh Minimum: 500
*c xConfiguration SIP UDP Mode: Off
*c xConfiguration SIP UDP Port: 5060
*c xConfiguration SIP TCP Mode: On
*c xConfiguration SIP TCP Port: 5060
*c xConfiguration SIP TCP Outbound Port Start: 25000
*c xConfiguration SIP TCP Outbound Port End: 29999
*c xConfiguration SIP TLS Mode: On
*c xConfiguration SIP TLS Port: 5061
*c xConfiguration SIP TLS Certificate Revocation Checking Mode: Off
*c xConfiguration SIP TLS Certificate Revocation Checking OCSP Mode: On
*c xConfiguration SIP TLS Certificate Revocation Checking CRL Mode: On
*c xConfiguration SIP TLS Certificate Revocation Checking CRL Network Fetch
Mode: On
*c xConfiguration SIP TLS Certificate Revocation Checking Source Inaccessibility
Behavior: Fail
*c xConfiguration SIP Require UDP BFCP Mode: On
*c xConfiguration SIP Require Duo Video Mode: On
*c xConfiguration SIP Authentication Retry Limit: 3
*c xConfiguration SIP Authentication NTLM Mode: Auto
*c xConfiguration SIP Authentication NTLM SA Lifetime: 28800
*c xConfiguration SIP Authentication NTLM SA Limit: 10000
*c xConfiguration SIP Authentication Digest Nonce ExpireDelta: 300
*c xConfiguration SIP Authentication Digest Nonce Maximum Use Count: 128
*c xConfiguration SIP Authentication Digest Nonce Limit: 10000
*c xConfiguration SIP Authentication Digest Nonce Length: 60
*c xConfiguration SIP GRUU Mode: On
*c xConfiguration SIP MediaRouting ICE Mode: Off
*c xConfiguration Interworking Mode: RegisteredOnly
*c xConfiguration Interworking Encryption Mode: Auto
*c xConfiguration Interworking Encryption Replay Protection Mode: Off
*c xConfiguration Interworking BFCP Compatibility Mode: Auto
*c xConfiguration Interworking Require Invite Header Mode: On
*c xConfiguration Traversal Media Port Start: 50000
*c xConfiguration Traversal Media Port End: 52399
*c xConfiguration Authentication UserName: ""
*c xConfiguration Authentication Password: "{cipher}XXXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Authentication LDAP AliasOrigin: LDAP
*c xConfiguration Authentication ADS ADDomain: ""
*c xConfiguration Authentication ADS Workgroup: ""
*c xConfiguration Authentication ADS MachinePassword Refresh: On
*c xConfiguration Authentication ADS SPNEGO: Enabled
*c xConfiguration Authentication ADS SecureChannel: Auto
*c xConfiguration Authentication ADS Encryption: TLS
*c xConfiguration Authentication ADS Mode: Off
*c xConfiguration Authentication ADS Clockskew: 300
*c xConfiguration Zones Policy Mode: SearchRules
*c xConfiguration Zones Policy SearchRules Rule 1 Name: "Local zone ? no domain"
*c xConfiguration Zones Policy SearchRules Rule 1 Description: "Search local
zone for H.323 devices (strip domain)"
*c xConfiguration Zones Policy SearchRules Rule 1 Priority: 48
*c xConfiguration Zones Policy SearchRules Rule 1 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 1 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 1 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 1 Mode: AliasPatternMatch
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern Type: Regex
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern String: "(.+)
@######.local.*"
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern Behavior: Replace
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern Replace: "\1"
*c xConfiguration Zones Policy SearchRules Rule 1 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 1 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 1 Target Name: "LocalZone"
*c xConfiguration Zones Policy SearchRules Rule 1 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 2 Name: "Local zone ? full URI"
*c xConfiguration Zones Policy SearchRules Rule 2 Description: "Search local
zone for SIP and H.323 devices with a domain"
*c xConfiguration Zones Policy SearchRules Rule 2 Priority: 51
*c xConfiguration Zones Policy SearchRules Rule 2 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 2 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 2 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 2 Mode: AliasPatternMatch
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern Type: Regex
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern String: "(.+)
@######.local.*"
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern Behavior: Leave
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern Replace: ""
*c xConfiguration Zones Policy SearchRules Rule 2 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 2 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 2 Target Name: "LocalZone"
*c xConfiguration Zones Policy SearchRules Rule 2 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 3 Name: "Traversal zone search rule"
*c xConfiguration Zones Policy SearchRules Rule 3 Description: "Search traversal
zone (Cisco VCS Expressway)"
*c xConfiguration Zones Policy SearchRules Rule 3 Priority: 100
*c xConfiguration Zones Policy SearchRules Rule 3 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 3 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 3 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 3 Mode: AnyAlias
*c xConfiguration Zones Policy SearchRules Rule 3 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 3 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 3 Target Name: "TraversalZone"
*c xConfiguration Zones Policy SearchRules Rule 3 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 4 Name: "External IP address
search rule"
*c xConfiguration Zones Policy SearchRules Rule 4 Description: "Route external
IP address"
*c xConfiguration Zones Policy SearchRules Rule 4 Priority: 100
*c xConfiguration Zones Policy SearchRules Rule 4 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 4 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 4 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 4 Mode: AnyIPAddress
*c xConfiguration Zones Policy SearchRules Rule 4 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 4 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 4 Target Name: "TraversalZone"
*c xConfiguration Zones Policy SearchRules Rule 4 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 5 Name: "LocalZoneMatch"
*c xConfiguration Zones Policy SearchRules Rule 5 Description: "Default rule:
queries the Local Zone for any alias"
*c xConfiguration Zones Policy SearchRules Rule 5 Priority: 50
*c xConfiguration Zones Policy SearchRules Rule 5 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 5 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 5 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 5 Mode: AnyAlias
*c xConfiguration Zones Policy SearchRules Rule 5 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 5 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 5 Target Name: "LocalZone"
*c xConfiguration Zones Policy SearchRules Rule 5 State: Enabled
*c xConfiguration Zones DefaultZone Authentication Mode: DoNotCheckCredentials
*c xConfiguration Zones DefaultZone SIP Record Route Address Type: IP
*c xConfiguration Zones DefaultZone SIP TLS Verify Mode: Off
*c xConfiguration Zones DefaultZone SIP Media Encryption Mode: Auto
*c xConfiguration Zones LocalZone DefaultSubZone SIP Media Encryption Mode: Auto
*c xConfiguration Zones LocalZone DefaultSubZone Authentication Mode:
DoNotCheckCredentials
*c xConfiguration Zones LocalZone DefaultSubZone Registrations: Allow
*c xConfiguration Zones LocalZone DefaultSubZone Bandwidth Total Mode: Unlimited
*c xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode:
Unlimited
*c xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode:
Unlimited
*c xConfiguration Zones LocalZone TraversalSubZone Bandwidth Total Mode: Unlimited
*c xConfiguration Zones LocalZone TraversalSubZone Bandwidth PerCall Mode:
Unlimited
*c xConfiguration Zones LocalZone SIP Record Route Address Type: IP
*c xConfiguration Zones Zone 1 Name: "TraversalZone"
*c xConfiguration Zones Zone 1 HopCount: 15
*c xConfiguration Zones Zone 1 H323 Mode: On
*c xConfiguration Zones Zone 1 SIP Mode: On
*c xConfiguration Zones Zone 1 Type: TraversalClient
*c xConfiguration Zones Zone 1 TraversalClient Authentication Mode: DoNot
CheckCredentials
*c xConfiguration Zones Zone 1 TraversalClient Authentication UserName:
"######auth"
*c xConfiguration Zones Zone 1 TraversalClient Authentication Password:
"{cipher}XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Zones Zone 1 TraversalClient Registrations: Allow
*c xConfiguration Zones Zone 1 TraversalClient H323 Protocol: Assent
*c xConfiguration Zones Zone 1 TraversalClient H323 Port: 6001
*c xConfiguration Zones Zone 1 TraversalClient SIP Protocol: Assent
*c xConfiguration Zones Zone 1 TraversalClient SIP Port: 7001
*c xConfiguration Zones Zone 1 TraversalClient SIP Transport: TLS
*c xConfiguration Zones Zone 1 TraversalClient SIP TLS Verify Mode: Off
*c xConfiguration Zones Zone 1 TraversalClient SIP Poison Mode: Off
*c xConfiguration Zones Zone 1 TraversalClient SIP Media Encryption Mode: Auto
*c xConfiguration Zones Zone 1 TraversalClient RetryInterval: 120
*c xConfiguration Zones Zone 1 TraversalClient Peer 1 Address: "10.10.10.102"
*c xConfiguration Zones Zone 1 TraversalClient Peer 2 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 3 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 4 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 5 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 6 Address: ""
*c xConfiguration Bandwidth Default: 384
*c xConfiguration Bandwidth Downspeed PerCall Mode: On
*c xConfiguration Bandwidth Downspeed Total Mode: On
*c xConfiguration Bandwidth Link 1 Name: "DefaultSZtoTraversalSZ"
*c xConfiguration Bandwidth Link 1 Node1 Name: "DefaultSubZone"
*c xConfiguration Bandwidth Link 1 Node2 Name: "TraversalSubZone"
*c xConfiguration Bandwidth Link 1 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 1 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 2 Name: "DefaultSZtoDefaultZ"
*c xConfiguration Bandwidth Link 2 Node1 Name: "DefaultSubZone"
*c xConfiguration Bandwidth Link 2 Node2 Name: "DefaultZone"
*c xConfiguration Bandwidth Link 2 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 2 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 3 Name: "DefaultSZtoClusterSZ"
*c xConfiguration Bandwidth Link 3 Node1 Name: "DefaultSubZone"
*c xConfiguration Bandwidth Link 3 Node2 Name: "ClusterSubZone"
*c xConfiguration Bandwidth Link 3 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 3 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 4 Name: "TraversalSZtoDefaultZ"
*c xConfiguration Bandwidth Link 4 Node1 Name: "TraversalSubZone"
*c xConfiguration Bandwidth Link 4 Node2 Name: "DefaultZone"
*c xConfiguration Bandwidth Link 4 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 4 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 5 Name: "Zone001ToTraversalSZ"
*c xConfiguration Bandwidth Link 5 Node1 Name: "TraversalZone"
*c xConfiguration Bandwidth Link 5 Node2 Name: "TraversalSubZone"
*c xConfiguration Bandwidth Link 5 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 5 Pipe2 Name: ""
*c xConfiguration Policy AdministratorPolicy Mode: Off
*c xConfiguration Policy AdministratorPolicy Service Protocol: HTTP
*c xConfiguration Policy AdministratorPolicy Service TLS Verify Mode: On
*c xConfiguration Policy AdministratorPolicy Service TLS CRLCheck Mode: Off
*c xConfiguration Policy AdministratorPolicy Service Server 1 Address: ""
*c xConfiguration Policy AdministratorPolicy Service Server 2 Address: ""
*c xConfiguration Policy AdministratorPolicy Service Server 3 Address: ""
*c xConfiguration Policy AdministratorPolicy Service Path: ""
*c xConfiguration Policy AdministratorPolicy Service Status Path: "status"
*c xConfiguration Policy AdministratorPolicy Service UserName: ""
*c xConfiguration Policy AdministratorPolicy Service Password: "{cipher}
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Policy AdministratorPolicy Service DefaultCPL: "<reject
status='504' reason='Admin Policy Unavailable'/>"
*c xConfiguration Policy FindMe Mode: Off
*c xConfiguration Policy FindMe CallerId: IncomingID
*c xConfiguration Policy FindMe UserDeviceRestriction: Off
*c xConfiguration Applications ConferenceFactory Mode: Off
*c xConfiguration Applications ConferenceFactory Alias: ""
*c xConfiguration Applications ConferenceFactory Template: ""
*c xConfiguration Applications ConferenceFactory Range Start: 1
*c xConfiguration Applications ConferenceFactory Range End: 65535
*c xConfiguration Applications OCS Relay Mode: Off
*c xConfiguration Applications OCS Relay OCS Domain: ""
*c xConfiguration Applications OCS Relay OCS Routing Prefix: "ocs"
*c xConfiguration Applications Presence Server Mode: Off
*c xConfiguration Applications Presence Server Publication ExpireDelta: 1800
*c xConfiguration Applications Presence Server Subscription ExpireDelta: 3600
*c xConfiguration Applications Presence User Agent Mode: Off
*c xConfiguration Applications Presence User Agent ExpireDelta: 3600
*c xConfiguration Applications Presence User Agent RetryDelta: 1800
*c xConfiguration Applications Presence User Agent Presentity Idle Status: Online
*c xConfiguration ResourceUsage Warning Activation Level: 90
*c xConfiguration Services AdvancedMediaGateway Zone Name: ""
*c xConfiguration Services AdvancedMediaGateway Policy Mode: Off
OK
exit
Bye!
Estes são os três problemas mais comuns que você pode encontrar:
Revisão | Data de publicação | Comentários |
---|---|---|
1.0 |
15-Dec-2014 |
Versão inicial |