Dit document legt uit hoe u Cisco Aironet-stuurprogramma's kunt installeren op een Microsoft DOS (MS-DOS)-laptop.
Cisco raadt kennis van de volgende onderwerpen aan:
Draadloze LAN (WLAN)-technologie en -voorwaarden
PC hardware onderwerpen
MS-DOS-configuratieopdrachten
De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:
Aironet PCM 3xx- of LMC 3xx-clientadapters
MS-DOS 6.22
Aironet driver voor DOS versie 6.2
Voltooi de volgende stappen om het DOS-stuurprogramma te installeren:
Bouw het bestand config.sys op deze manier:
DEVICE=A:\DOS\HIMEM.SYS DEVICE=A:\DOS\EMM386.EXE X=D000-DFFF FRAME=NONE DEVICEHIGH=A:\IBMDSS14.SYS DEVICEHIGH=A:\IBMDOSCS.SYS DEVICEHIGH=A:\DICRMU01.SYS /MA-D000-D7FF /SH=1 /IX=5,10,11,15 DEVICE=A:\NET\IFSHLP.SYS DEVICE=A:\DOS\RAMDRIVE.SYS 2048 /e DEVICE=A:\DOS\ANSI.SYS DOS=HIGH,UMB FILES=40 BUFFERS=30 LASTDRIVE=Z SHELL=COMMAND.COM /e:512 /p
De bestanden IBMDS14.SYS, IBMDOSCS.SYS en DICRMU01.SYS zijn PCMCIA Card en Socket Services voor het voorbeeldmodel IBM laptop. Vervang desgewenst de juiste bestanden van de fabrikant van de laptop.
Pas het meegeleverde cscpkt.ini bestand aan uw individuele wensen aan:
[CSCPKT] ;Initialization file for Infrastructure operating mode ; NOTE: The following are some keyword parameters that may ;be modified. Any commented or omitted keyword parameter ;assumes the factory default. For most situations the ;factory defaults will be appropriate. In situations where ;the factory default needs to be modified, uncomment or add the ;keyword parameter line and set the appropriate keyword value. SSID="network_ssid" ;Must match Access Point setting ;FragThreshold=2312 ;Packet size to start fragmenting ;RTSThreshold=2312 ;Packet size to start sending RTS/CTS ;DataRate1=0x02 ;(1) Mbps supported data bit rate ;DataRate2=0x04 ;(2) Mbps supported data bit rate ;DataRate3=0x0B ;(5.5) Mbps supported data bit rate ;DataRate4=0x16 ;(11) Mbps supported data bit rate ;RefreshInterval=10000 ;Inactivity time to check association ;PowerSaveMode="CAM" ;Constant Awake Mode ;MaxPowerSave="OFF" ;Maximum power save mode NodeName="CiscoPC" ;Descriptive station name AuthType="WEPOPEN" ;WEP with open authentication ;The adapter needs 32 16-bit I/O ports, and 1 non-sharable IRQ. ;The following lines should be uncommented and the appropriate ;values set in the following scenarios: ; 1) PCMCIA mode: Override the I/O port base and/or IRQ ; assigned by PCMCIA card services. ; 2) PCMCIA mode: PCMCIA card services is not being used. ; 3) ISA mode: Override the I/O port base and/or IRQ assigned ; by Plug and Play. ; 4) ISA mode: Non-Plug and Play operation. ;PortBase=0x140 ;IRQ=5 ;If the PCMCIA interface is being used without PCMCIA card services, ;uncomment the following lines and set the appropriate values. Memory=0xD000 Socket=0 ;If the PCMCIA interface is not being used, set the appropriate ;value of "ISA" or "PCI". BusType="PCMCIA"
Start de computer om het bovenstaande bestand config.sys te laden.
Voer de volgende opdracht uit:
a:>wepdos -365 -tx1 12345678901234567890123456
setting key 1 to 12345678901234567890123456 setting transmit key index to 1
Voer de volgende opdracht uit:
a:>cscpkt 0x65
Cisco Wireless Packet Driver , version 2.04 (c) Copyright 2000 Cisco System , Inc. All rights Reserved Card recognized as a radio in socket 00 Driver Resources --> IO ports 0400-043F IRQ :03 350 series Firmware 4.25.30 Mac Address 00:09:7c:31:87:32
Revisie | Publicatiedatum | Opmerkingen |
---|---|---|
1.0 |
08-Jul-2002 |
Eerste vrijgave |