De documentatie van dit product is waar mogelijk geschreven met inclusief taalgebruik. Inclusief taalgebruik wordt in deze documentatie gedefinieerd als taal die geen discriminatie op basis van leeftijd, handicap, gender, etniciteit, seksuele oriëntatie, sociaaleconomische status of combinaties hiervan weerspiegelt. In deze documentatie kunnen uitzonderingen voorkomen vanwege bewoordingen die in de gebruikersinterfaces van de productsoftware zijn gecodeerd, die op het taalgebruik in de RFP-documentatie zijn gebaseerd of die worden gebruikt in een product van een externe partij waarnaar wordt verwezen. Lees meer over hoe Cisco gebruikmaakt van inclusief taalgebruik.
Cisco heeft dit document vertaald via een combinatie van machine- en menselijke technologie om onze gebruikers wereldwijd ondersteuningscontent te bieden in hun eigen taal. Houd er rekening mee dat zelfs de beste machinevertaling niet net zo nauwkeurig is als die van een professionele vertaler. Cisco Systems, Inc. is niet aansprakelijk voor de nauwkeurigheid van deze vertalingen en raadt aan altijd het oorspronkelijke Engelstalige document (link) te raadplegen.
Dit document beschrijft hoe u de Quality of Service (QoS) van Cisco Catalyst 6800ia host-poorten kunt configureren, controleren en oplossen. QoS wordt ondersteund op 6800ia host-poorten in Cisco IOS® softwarerelease 152.1.SY en later op een Catalyst 6800 parent Virtual Switching System (VSS).
Er zijn geen specifieke vereisten van toepassing op dit document.
De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:
De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.
De configuratiemodus op een Catalyst 6800ia is uitgeschakeld en alle QoS-configuraties voor 6800ia host-poorten moeten vanaf de parent worden uitgevoerd. QoS voor 6800ia host-poort wordt geconfigureerd met een beleidskaart. Wanneer toegepast op de interfaces, drukt deze beleidskaart de relevante configuratie intern naar de 6800ia en programmeert vervolgens de hardwarewachtrijen.
6800ia host-poorten hebben 1p3q3t architectuur in transport (TX) richting. Alle configuratievoorbeelden in dit document zijn alleen van toepassing op TX wachtrijen op een 6800ia.
Wanneer er geen expliciete QoS-configuratie aanwezig is op de 6800ia-interfaces in de standaardinstelling, kan de 6800ia host-interface er vergelijkbaar uitzien met deze voorbeelduitvoer:
6880-VSS#show run int gi101/1/0/1
interface GigabitEthernet101/1/0/1
switchport
switchport trunk allowed vlan 500
switchport mode access
switchport access vlan 500
load-interval 30
end
6880-VSS#show queueing interface gi101/1/0/1
Interface GigabitEthernet101/1/0/1 queueing strategy: Weighted Round-Robin
Port QoS is disabled globally
Queueing on Gi101/1/0/1: Tx Enabled Rx Disabled
Trust boundary disabled
Trust state: trust DSCP
Trust state in queueing: trust DSCP
Default COS is 0
Queueing Mode In Tx direction: mode-dscp
Transmit queues [type = 1p3q3t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Priority 3
2 WRR 3
3 WRR 3
4 WRR 3
WRR bandwidth ratios: 100[queue 2] 100[queue 3] 100[queue 4] 0[queue 5]
queue-limit ratios: 15[Pri Queue] 25[queue 2] 40[queue 3] 20[queue 4]
queue thresh dscp-map
---------------------------------------
1 1 32 33 40 41 42 43 44 45 46 47
1 2
1 3
2 1 16 17 18 19 20 21 22 23 26 27 28 29 30 31 34 35 36 37 38 39
2 2 24
2 3 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
3 1 25
3 2
3 3 0 1 2 3 4 5 6 7
4 1 8 9 11 13 15
4 2 10 12 14
4 3
Dit voorbeeld toont hoe u bandbreedte voor 6800ia TX wachtrijen kunt configureren:
class-map type lan-queuing match-any ltest
match dscp 32
class-map type lan-queuing match-any ltest1
match dscp 24
class-map type lan-queuing match-any ltest2
match dscp default
policy-map type lan-queuing ltest
class type lan-queuing ltest
priority
class type lan-queuing ltest1
bandwidth remaining percent 30
class type lan-queuing ltest2
bandwidth remaining percent 20
class class-default
Opmerking: Wanneer u een LAN-wachtrij beleidskaart op één poort op een 6800ia-stapel toepast, verspreidt het de veranderingen in alle poorten in de stapel.
6880-VSS#conf t
6880-VSS(config)#int gi101/1/0/1
6880-VSS(config-if)#service-policy type lan-queuing output ltest
Propagating [attach] lan queueing policy "ltest" to Gi101/1/0/1 Gi101/1/0/2 Gi101/1/0/3
Gi101/1/0/4 Gi101/1/0/5 Gi101/1/0/6 Gi101/1/0/7 Gi101/1/0/8 Gi101/1/0/9 Gi101/1/0/10
Gi101/1/0/12 Gi101/1/0/13 Gi101/1/0/14 Gi101/1/0/15 Gi101/1/0/16 Gi101/1/0/17
Gi101/1/0/18 Gi101/1/0/19 Gi101/1/0/20 Gi101/1/0/21 Gi101/1/0/22 Gi101/1/0/23
Gi101/1/0/24 Gi101/1/0/25 Gi101/1/0/26 Gi101/1/0/27 Gi101/1/0/28 Gi101/1/0/29
Gi101/1/0/30 Gi101/1/0/31 Gi101/1/0/32 Gi101/1/0/33 Gi101/1/0/34 Gi101/1/0/35
Gi101/1/0/36 Gi101/1/0/37 Gi101/1/0/38 Gi101/1/0/39 Gi101/1/0/40 Gi101/1/0/41
Gi101/1/0/42 Gi101/1/0/43 Gi101/1/0/44 Gi101/1/0/45 Gi101/1/0/46 Gi101/1/0/47 Gi101/1/0/48
Propagating [attach] lan queueing policy "ltest" to Gi101/2/0/1 Gi101/2/0/2
Gi101/2/0/3 Gi101/2/0/4 Gi101/2/0/5 Gi101/2/0/6 Gi101/2/0/7 Gi101/2/0/8
Gi101/2/0/9 Gi101/2/0/10 Gi101/2/0/11 Gi101/2/0/12 Gi101/2/0/13 Gi101/2/0/14
Gi101/2/0/15 Gi101/2/0/16 Gi101/2/0/17 Gi101/2/0/18 Gi101/2/0/19 Gi101/2/0/20
Gi101/2/0/21 Gi101/2/0/22 Gi101/2/0/23 Gi101/2/0/24 Gi101/2/0/25 Gi101/2/0/26
Gi101/2/0/27 Gi101/2/0/28 Gi101/2/0/29 Gi101/2/0/30 Gi101/2/0/31 Gi101/2/0/32
Gi101/2/0/33 Gi101/2/0/34 Gi101/2/0/35 Gi101/2/0/36 Gi101/2/0/37 Gi101/2/0/38
Gi101/2/0/39 Gi101/2/0/40 Gi101/2/0/41 Gi101/2/0/42 Gi101/2/0/43 Gi101/2/0/44
Gi101/2/0/45 Gi101/2/0/46 Gi101/2/0/47 Gi101/2/0/48
Propagating [attach] lan queueing policy "ltest" to Gi101/3/0/1 Gi101/3/0/2
Gi101/3/0/3 Gi101/3/0/4 Gi101/3/0/5 Gi101/3/0/6 Gi101/3/0/7 Gi101/3/0/8
Gi101/3/0/9 Gi101/3/0/10 Gi101/3/0/11 Gi101/3/0/12 Gi101/3/0/13 Gi101/3/0/14
Gi101/3/0/15 Gi101/3/0/16 Gi101/3/0/17 Gi101/3/0/18 Gi101/3/0/19 Gi101/3/0/20
Gi101/3/0/21 Gi101/3/0/22 Gi101/3/0/23 Gi101/3/0/24 Gi101/3/0/25 Gi101/3/0/26
Gi101/3/0/27 Gi101/3/0/28 Gi101/3/0/29 Gi101/3/0/30 Gi101/3/0/31 Gi101/3/0/32
Gi101/3/0/33 Gi101/3/0/34 Gi101/3/0/35 Gi101/3/0/36 Gi101/3/0/37 Gi101/3/0/38
Gi101/3/0/39 Gi101/3/0/40 Gi101/3/0/41 Gi101/3/0/42 Gi101/3/0/43 Gi101/3/0/44
Gi101/3/0/45 Gi101/3/0/46 Gi101/3/0/47 Gi101/3/0/48
Propagating [attach] lan queueing policy "ltest" to Gi101/4/0/1 Gi101/4/0/2
Gi101/4/0/3 Gi101/4/0/4 Gi101/4/0/5 Gi101/4/0/6 Gi101/4/0/7 Gi101/4/0/8
Gi101/4/0/9 Gi101/4/0/10 Gi101/4/0/11 Gi101/4/0/12 Gi101/4/0/13 Gi101/4/0/14
Gi101/4/0/15 Gi101/4/0/16 Gi101/4/0/17 Gi101/4/0/18 Gi101/4/0/19 Gi101/4/0/20
Gi101/4/0/21 Gi101/4/0/22 Gi101/4/0/23 Gi101/4/0/24 Gi101/4/0/25 Gi101/4/0/26
Gi101/4/0/27 Gi101/4/0/28 Gi101/4/0/29 Gi101/4/0/30 Gi101/4/0/31 Gi101/4/0/32
Gi101/4/0/33 Gi101/4/0/34 Gi101/4/0/35 Gi101/4/0/36 Gi101/4/0/37 Gi101/4/0/38
Gi101/4/0/39 Gi101/4/0/40 Gi101/4/0/41 Gi101/4/0/42 Gi101/4/0/43 Gi101/4/0/44
Gi101/4/0/45 Gi101/4/0/46 Gi101/4/0/47 Gi101/4/0/48
6880-VSS(config-if)#
6880-VSS(config-if)#end
6880-VSS#show run int gi101/1/0/1
interface GigabitEthernet101/1/0/1
switchport
switchport trunk allowed vlan 500
switchport mode access
switchport access vlan 500
load-interval 30
service-policy type lan-queuing output ltest
end
6880-VSS#show queueing int gi101/1/0/1
Interface GigabitEthernet101/1/0/1 queueing strategy: Weighted Round-Robin
Port QoS is disabled globally
Queueing on Gi101/1/0/1: Tx Enabled Rx Disabled
Trust boundary disabled
Trust state: trust DSCP
Trust state in queueing: trust DSCP
Default COS is 0
Class-map to Queue in Tx direction
Class-map Queue Id
----------------------------
ltest 1
ltest1 4
ltest2 3
class-default 2
Queueing Mode In Tx direction: mode-dscp
Transmit queues [type = 1p3q3t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Priority 3
2 WRR 3
3 WRR 3
4 WRR 3
WRR bandwidth ratios: 50[queue 2] 20[queue 3] 30[queue 4]
queue-limit ratios: 15[Pri Queue] 100[queue 2] 100[queue 3] 100[queue 4]
queue thresh dscp-map
---------------------------------------
1 1 32
1 2
1 3
2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 25 26 27 28 29 30 31 33 34 35 36 37 38 39 40 41 42 43
44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
2 2
2 3
3 1 0
3 2
3 3
4 1 24
4 2
4 3
Opmerking: Als u voor een bepaalde klasse geen buffergewicht specificeert, duurt het standaard 100%.
Wachtrij 1: 15 / [15+100+100+100] = 4
Wachtrij 2: 100 / [15+100+100+100]-31
Gewichten worden ook afgeleid voor andere wachtrijen.
6880-VSS#remote command fex 101 show mls qos int gi1/0/1 buffer
GigabitEthernet1/0/1
The port is mapped to qset : 1
The allocations between the queues are : 4 31 31 34
6880-VSS#remote command fex 101 show mls qos int gi1/0/1 queueing
GigabitEthernet1/0/1
Egress Priority Queue : enabled
Shaped queue weights (absolute) : 0 0 0 0
Shared queue weights : 0 127 51 76
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 1
6880-VSS#remote command fex 101 show mls qos int gi1/0/1 statistic
GigabitEthernet1/0/1 (All statistics are in packets)
dscp: incoming
-------------------------------
0 - 4 : 0 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 0
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 0 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 0 0 13 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
dscp: outgoing
-------------------------------
0 - 4 : 0 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 9118500
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 516236 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 0 0 20 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
cos: incoming
-------------------------------
0 - 4 : 106 0 0 0 0
5 - 7 : 0 0 0
cos: outgoing
-------------------------------
0 - 4 : 41 0 0 9118505 516236
5 - 7 : 0 0 0
output queues enqueued:
queue: threshold1 threshold2 threshold3
-----------------------------------------------
queue 0: 516255 35 5
queue 1: 12 0 0
queue 2: 0 0 0
queue 3: 9118520 0 0
output queues dropped:
queue: threshold1 threshold2 threshold3
-----------------------------------------------
queue 0: 0 0 0
queue 1: 0 0 0
queue 2: 0 0 0
queue 3: 49823 0 0
Policer: Inprofile: 0 OutofProfile: 0
Dit voorbeeld toont hoe u bandbreedte en buffers voor 6800ia TX wachtrijen kunt configureren:
Opmerking: Als u voor een bepaalde klasse geen buffergewicht specificeert, duurt het standaard 100%.
policy-map type lan-queuing ltest
class type lan-queuing ltest
priority
queue-buffers ratio 15
class type lan-queuing ltest1
bandwidth remaining percent 30
queue-buffers ratio 30
class type lan-queuing ltest2
bandwidth remaining percent 20
queue-buffers ratio 40
class class-default
queue-buffer ratio 15
6880-VSS#sh queueing int gi101/1/0/1
Interface GigabitEthernet101/1/0/1 queueing strategy: Weighted Round-Robin
Port QoS is disabled globally
Queueing on Gi101/1/0/1: Tx Enabled Rx Disabled
Trust boundary disabled
Trust state: trust DSCP
Trust state in queueing: trust DSCP
Default COS is 0
Class-map to Queue in Tx direction
Class-map Queue Id
----------------------------
ltest 1
ltest1 4
ltest2 3
class-default 2
Queueing Mode In Tx direction: mode-dscp
Transmit queues [type = 1p3q3t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Priority 3
2 WRR 3
3 WRR 3
4 WRR 3
WRR bandwidth ratios: 50[queue 2] 20[queue 3] 30[queue 4]
queue-limit ratios: 15[Pri Queue] 15[queue 2] 40[queue 3] 30[queue 4]
queue thresh dscp-map
---------------------------------------
1 1 32
1 2
1 3
2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
22 23 25 26 27 28 29 30 31 33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
2 2
2 3
3 1 0
3 2
3 3
4 1 24
4 2
4 3
6880-VSS#remote command fex 101 sh mls qos int gi1/0/1 queueing
GigabitEthernet1/0/1
Egress Priority Queue : enabled
Shaped queue weights (absolute) : 0 0 0 0
Shared queue weights : 0 127 51 76
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 1
6880-VSS#remote command fex 101 sh mls qos int gi1/0/1 buffers
GigabitEthernet1/0/1
The port is mapped to qset : 1
The allocations between the queues are : 15 15 40 30
6880-VSS#remote command fex 101 sh mls qos int gi1/0/1 statistic
GigabitEthernet1/0/1 (All statistics are in packets)
dscp: incoming
-------------------------------
0 - 4 : 0 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 0
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 0 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 0 0 491 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
dscp: outgoing
-------------------------------
0 - 4 : 0 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 57864687
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 29364400 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 0 0 775 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
cos: incoming
-------------------------------
0 - 4 : 5323 0 0 0 0
5 - 7 : 0 0 0
cos: outgoing
-------------------------------
0 - 4 : 1718 0 0 57864691 29364400
5 - 7 : 0 0 0
output queues enqueued:
queue: threshold1 threshold2 threshold3
-----------------------------------------------
queue 0: 29365402 1883 5
queue 1: 793 98 0
queue 2: 0 0 0
queue 3: 530554174 0 0
output queues dropped:
queue: threshold1 threshold2 threshold3
-----------------------------------------------
queue 0: 0 10 0
queue 1: 1 24093 0
queue 2: 0 0 0
queue 3: 2309351 0 0
Policer: Inprofile: 0 OutofProfile: 0
Er is momenteel geen verificatieprocedure beschikbaar voor deze configuratie.
Deze sectie bevat informatie waarmee u problemen met de configuratie kunt oplossen.
De Output Interpreter Tool (alleen voor geregistreerde klanten) ondersteunt bepaalde opdrachten met show. Gebruik de Output Interpreter Tool om een analyse te bekijken van de output van de opdracht show.
Opmerking: Raadpleeg Important Information on Debug Commands (Belangrijke informatie over opdrachten met debug) voordat u opdrachten met debug opgeeft.
6880-VSS#attach fex 101
Attach FEX:101 ip:192.168.1.101
Trying 192.168.1.101 ... Open
????????FEX-101>en
Password: cisco
FEX-101#
FEX-101#debug platform qos-manager all
QM verbose debugging is on
QM cops debugging is on
QM events debugging is on
QM Statistics debugging is on
FEX-101#exit
[Connection to 192.168.1.101 closed by foreign host]
6880-VSS#conf t
6880-VSS(config)#int gi101/1/0/1
6880-VSS(config-if)# service-policy type lan-queuing output ltest
Propagating [attach] lan queueing policy "ltest" to Gi101/1/0/1
Gi101/1/0/2 Gi101/1/0/3 Gi101/1/0/4 Gi101/1/0/5 Gi101/1/0/6 Gi101/1/0/7 Gi101/1/0/8
Gi101/1/0/9 Gi101/1/0/10 Gi101/1/0/12 Gi101/1/0/13 Gi101/1/0/14 Gi101/1/0/15 Gi101/1/0/16
<snip>
6880-VSS(config-if)#end
6880-VSS#remote command fex 101 show log
<snip>
May 20 06:43:18.208: HQM: hulc_fex_qos_priority_handler: hulc_fex_qos_priority_handler:
****Setting Priority Queue (FEX-101)
May 20 06:43:18.208: HQM: hulc_fex_qos_priority_handler: hulc_fex_qos_priority_handler:
subopcode=2 startport=0 endport=0 size=4 (FEX-101)
May 20 06:43:18.208: HQM: hulc_f
_fex_qos_priority_handler:QueueNum=1 PriorityQueue=1 queuetype=2 thresholdsnum=3 (FEX-101)
May 20 06:43:18.212: HQM: hulc_fex_qos_priority_handler: hulc_fex_qos_priority_handler:
idb=GigabitEthernet1/0/1 (FEX-101)
May 20 06:43:18.212: HQM: hulc_fex_qos_priority_handler: hulc_fex_qos_priority_handler:
idb=GigabitEthernet1/0/2 (FEX-101)
May 20 06:43:18.212: HQM: hulc_fex_qos_priority_handler: hulc_fex_qos_priority_handler:
idb=GigabitEthernet1/0/3 (FEX-101)
<snip>
hulc_fex_qos_srr_weight_setting:****Setting weight for queues**** (FEX-101)
May 20 06:43:18.232: HQM: hulc_fex_qos_srr_weight_setting: hulc_fex_qos_srr_weight_setting:
subopcode=2 startport=0 endport=0 size=4 (FEX-101)
May 20 06:43:18.232: HQM: hulc_fex_qos_srr_weight_setting: hulc_fex_qos_srr_weight_setting:
QueueNum=1 RRType=0 WeightRelative=0 WeightAbsolute=0 (FEX-101)
20 06:43:18.232: HQM: hulc_fex_qos_srr_weight_setting: hulc_fex_qos_srr_weight_setting:
ratio is 0 for queue 1 (FEX-101)
May 20 06:43:18.232: HQM: hulc_fex_qos_srr_weight_setting: hulc_fex_qos_srr_weight_setting:
QueueNum=2 RRType=0 WeightRelative=33 WeightAbsolute=0 (FEX-101)
<snip>
20 06:43:19.110: HQM: hulc_fex_qos_buffer_conf: **Setting buffer for output queues** (FEX-101)
May 20 06:43:19.110: HQM: hulc_fex_qos_buffer_conf: hulc_fex_qos_buffer_conf:
subopcode=2 startport=0 endport=0 size=4 (FEX-101)
May 20 06:43:19.110: HQM: hulc_fex_qos_buffer_conf: hulc_fex_qos_buffer_conf:
queuenum=1 size=15 (FEX-101)
May 20 06:43:19.110: HQM: hulc_fex_qos_buffer_conf:
hulc_fex_qos_buffer_conf: queuenum=2 size=25 (FEX-101)
May 20 06:43:19.110: HQM: hulc_fex_qos_buffer_conf:
hulc_fex_qos_buffer_conf: queuenum=3 size=40 (FEX-101)
May 20 06:43:19.110: HQM: hulc_fex_qos_buffer_conf:
hulc_fex_qos_buffer_conf: queuenum=4 size=20 (FEX-101)
May 20 06:43:19.110: HQM: hqm
20 06:43:19.113: HQM: s88g_qd_get_queue_threshold: s88g_qd_get_queue_threshold:
max_limit = 3200, set to 350. (FEX-101)
May 20 06:43:19.113: HQM: s88g_qd_get_queue_threshold: s88g_qd_get_queue_threshold:
max_limit = 3200, set to 350. (FEX-101)
<snip>
hulc_fex_qos_qthresh_map:****Setting dscp to output queue map**** (FEX-101)
May 20 06:43:19.169: HQM: hulc_fex_qos_qthresh_map: hulc_fex_qos_qthresh_map:
subopcode=2 startport=0 endport=0 size=1 (FEX-101)
May 20 06:43:19.169: HQM: hulc_fex_qos_qthresh_map: hulc_fex_qos_qthresh_map: DscpBma
20 06:43:19.169: HQM: hulc_fex_qos_qthresh_map: hulc_fex_qos_qthresh_map
dscp=32 iterator=0 (FEX-101)
May 20 06:43:19.169: HQM: hulc_fex_qos_qthresh_map: hulc_fex_qos_qthresh_map
dscp=33 iterator=1 (FEX-101)
May 20 06:43:19.169: HQM: hulc_fex_qos_qthresh_map: hulc_fex_qos_qthresh_map
dscp=40 iterator=2 (FEX-101)
<snip>