Dit document beschrijft de configuratie van een Cisco VPN 3002 hardwareclient die verbinding maakt met een Cisco IOS® router in Network Extension Mode met Cisco IOS-softwarerelease 12.2(8)T en Easy VPN (EzVPN)-serverfunctionaliteit. Dit staat Cisco IOS toe om VPN-tunnels te beëindigen die afkomstig zijn van EzVPN-clients, zoals VPN-clients, PIX en Cisco IOS EzVPN-clients. Er zijn minimaal vijf security associaties (SA’s) (één Internet Key Exchange [IKE] plus vier IPSec) wanneer de VPN-client verbinding maakt met een head-end apparaat. Dit komt doordat wanneer de VPN-client verbinding maakt met de head-end, er altijd wordt onderhandeld over twee IPSec SA's met een IP-adres van de openbare interface van een concentrator naar het IP-adres van de head-end. Deze tunnel wordt voor beheerdoeleinden gebruikt om verbinding met de VPN-client te maken via de head-end via de GUI of de Command Line Interface (CLI). Dit gebeurt automatisch. De andere twee zijn voor het gegevensverkeer tussen de netwerken achter de VPN-client en de Cisco IOS-router.
Raadpleeg De VPN 3002 Hardware Client configureren naar PIX 6.x om meer te weten te komen over hetzelfde scenario waarin de VPN-server PIX 6.x is.
Raadpleeg Een verbinding configureren tussen de VPN 3002-hardwareclient en een VPN 3000-concentrator in de netwerkuitbreidingsmodus om meer te weten te komen over hetzelfde scenario waarin de VPN-server de Cisco VPN 3000-serie concentrator is.
Er zijn geen specifieke vereisten van toepassing op dit document.
De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:
Cisco VPN 3002 hardwareclient
Cisco IOS-softwarerelease 12.2(8)T en hoger
De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.
Deze sectie bevat informatie over het configureren van de functies die in dit document worden beschreven.
Opmerking: Gebruik de Command Lookup Tool (alleen voor geregistreerde klanten) voor meer informatie over de opdrachten die in dit document worden gebruikt.
Het netwerk in dit document is als volgt opgebouwd:
Dit document gebruikt de volgende configuraties.
Cisco IOS-router |
---|
akim#show running Current configuration : 1449 bytes ! version 12.2 service config service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname akim ! !--- Enable Authentication, Authorizing and Accounting (AAA) !--- for user authentication and group authorization. aaa new-model !--- To enable X-Auth for user authentication, !--- enable the AAA commands. aaa authentication login userauthen local !--- To enable group authorization, !--- enable the AAA commands. aaa authorization network groupauthor local aaa session-id common ! !--- Define the username and password to be used for X-Auth. username fadi password 0 cisco memory-size iomem 10 ip subnet-zero ! ! ! !--- Create an Internet Security Association and !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations. crypto isakmp policy 3 encr 3des authentication pre-share group 2 ! !--- Create a group with the pre-shared key for IKE authentication. crypto isakmp client configuration group fadigroup key cisco123 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set myset esp-3des esp-sha-hmac ! !--- Create a dynamic map and !--- apply the transform set that was created earlier. crypto dynamic-map dynmap 10 set transform-set myset ! !--- Create the actual crypto map, !--- and apply the AAA lists that were created earlier. !--- These commands associate the AAA commands to the crypto map. crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! ! ! ! fax interface-type fax-mail mta receive maximum-recipients 0 ! ! ! ! !--- Apply the crypto map on the interface where !--- traffic leaves the router. interface FastEthernet0/0 ip address 209.165.202.129 255.255.255.224 duplex auto speed auto crypto map clientmap ! interface Serial0/0 no ip address shutdown no fair-queue clockrate 2000000 ! interface FastEthernet0/1 ip address 10.48.220.1 255.255.254.0 duplex auto speed auto ! interface Serial0/1 no ip address shutdown clockrate 2000000 ! ip classless ip route 0.0.0.0 0.0.0.0 209.165.202.130 ip http server ip pim bidir-enable ! ! ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 ! ! end |
Voltooi de volgende stappen om de VPN-client te configureren:
Selecteer Configuratie > Interfaces en controleer het IP-adres.
Selecteer Configuratie > Snel > Tijd en datum > Tijd om de tijd in te stellen en te controleren.
Selecteer Configuration > Quick > Private Interface > Private Intf om de statische IP-adressen op de interne hosts te configureren (geen DHCP).
Selecteer Nee voor "Wilt u het IP-adres van de Private Interface configureren?".
Selecteer Nee, gebruik de DHCP-server niet om adressen op te geven voor "Wilt u de DHCP-server op interface 1 gebruiken om adressen voor het lokale LAN op te geven?".
Specificeer IP-adres als u statisch bent door Configuration > Quick > Public Interface > Public Intf te selecteren.
Selecteer in het venster Public Interface een IP-adres opgeven en voer het juiste IP-adres, subnetmasker en standaardgateway in.
Configureer de externe VPN-peer (openbaar IP-adres van router). Hiertoe selecteert u Configuratie > Snel > IPSec en voert u een fadigroup in voor de groepsnaam, cisco123 voor het groepswachtwoord, fadi voor de gebruikersnaam en cisco voor het gebruikerswachtwoord.
Selecteer Configuratie > Snel > PAT en kies Nee, gebruik de netwerkuitbreidingsmodus vanuit het PAT-venster om de netwerkuitbreidingsmodus te configureren.
Selecteer Configuratie > Snel > DNS en voer de DNS-server en domeinnaam van de ISP in om DNS te configureren.
Selecteer Configuratie > Snel > Statische Routes en klik op Add om een statische route aan de routeringstabel toe te voegen om de standaardgateway van de VPN-client te configureren.
Deze sectie bevat informatie die u kunt gebruiken om te controleren of uw configuratie correct werkt.
De Output Interpreter Tool (OIT) (alleen voor geregistreerde klanten) ondersteunt bepaalde opdrachten met show. Gebruik de OIT om een analyse te bekijken van de output van de opdracht show.
Raadpleeg Problemen met IP-beveiliging oplossen - debug-opdrachten begrijpen en gebruiken voor relevante opdrachten weergeven.
Deze sectie bevat informatie waarmee u problemen met de configuratie kunt oplossen.
Opmerking: als PAT Enabled wordt gebruikt in Cisco VPN 3002 client, verwijdert het opnieuw laden de gebruikersnaam en het wachtwoord die bestaan. U moet de nieuwe gebruikersnaam en het wachtwoord voor de client configureren.
Opmerking: als PAT Disabled (NEM) wordt gebruikt, behoudt het herladen de gebruikersnaam en het wachtwoord op voorwaarde dat de head-end is geconfigureerd voor het opslaan van de gebruikersnaam en het wachtwoord.
Dit is informatie over probleemoplossing die relevant is voor deze configuratie. Raadpleeg IP Security Probleemoplossing - Inzicht in en gebruik van debug-opdrachten voor extra informatie over probleemoplossing. Voltooi de volgende stappen om problemen met uw configuratie op te lossen:
Zorg ervoor dat u de fase 1 en fase 2 SA vestiging ziet. Gebruik de debug-basislijn in het gedeelte Opdrachten voor probleemoplossing.
Zodra u de SA's ziet, verstuur verkeer tussen de beschermde netwerken om de connectiviteit te testen.
De Output Interpreter Tool (OIT) (alleen voor geregistreerde klanten) ondersteunt bepaalde opdrachten met show. Gebruik de OIT om een analyse te bekijken van de output van de opdracht show.
Opmerking: raadpleeg Belangrijke informatie over debug-opdrachten voordat u debug-opdrachten gebruikt.
debug crypto ipsec—Hier worden IPSec-gebeurtenissen weergegeven.
debug crypto isakmp—Hier worden berichten over IKE-gebeurtenissen weergegeven.
debug crypto engine-displays debug berichten over crypto-engine, die encryptie en decryptie uitvoeren.
!--- Cisco IOS has received a request for new SA from the VPN Client. 03:36:19: ISAKMP (0:0): received packet from 209.165.200.225 (N) NEW SA 03:36:19: ISAKMP: local port 500, remote port 500 03:36:19: ISAKMP (0:1): (Re)Setting client xauth list userauthen and state 03:36:19: ISAKMP: Locking CONFIG struct 0x631B752C from crypto_ikmp_config_initialize_sa, count 1 03:36:19: ISAKMP (0:1): processing SA payload. message ID = 0 03:36:19: ISAKMP (0:1): processing ID payload. message ID = 0 03:36:19: ISAKMP (0:1): processing vendor id payload 03:36:19: ISAKMP (0:1): vendor ID seems Unity/DPD but bad major 03:36:19: ISAKMP (0:1): vendor ID is XAUTH 03:36:19: ISAKMP (0:1): processing vendor id payload 03:36:19: ISAKMP (0:1): vendor ID is Unity !--- Cisco IOS checks the incoming ISAKMP proposal with the policy !--- defined in Cisco IOS. 03:36:19: ISAKMP (0:1): Checking ISAKMP transform 1 against priority 3 policy 03:36:19: ISAKMP: default group 2 03:36:19: ISAKMP: encryption 3DES-CBC 03:36:19: ISAKMP: hash SHA 03:36:19: ISAKMP: auth XAUTHInitPreShared 03:36:19: ISAKMP: life type in seconds 03:36:19: ISAKMP: life duration (VPI) of 0x7F 0xFF 0xFF 0xFF 03:36:19: ISAKMP (0:1): atts are acceptable. Next payload is 3 03:36:19: CryptoEngine0: generate alg parameter 03:36:19: CRYPTO_ENGINE: Dh phase 1 status: 0 03:36:19: CRYPTO_ENGINE: Dh phase 1 status: 0 03:36:19: ISAKMP (0:1): processing KE payload. message ID = 0 03:36:19: CryptoEngine0: generate alg parameter 03:36:19: ISAKMP (0:1): processing NONCE payload. message ID = 0 03:36:19: ISAKMP (0:1): processing vendor id payload 03:36:19: ISAKMP (0:1): vendor ID seems Unity/DPD but bad major 03:36:19: ISAKMP (0:1): vendor ID is XAUTH 03:36:19: ISAKMP (0:1): processing vendor id payload 03:36:19: ISAKMP (0:1): vendor ID is Unity 03:36:19: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH Old State = IKE_READY New State = IKE_R_AM_AAA_AWAIT 03:36:19: ISAKMP: got callback 1 03:36:19: CryptoEngine0: create ISAKMP SKEYID for conn id 1 03:36:19: ISAKMP (0:1): SKEYID state generated 03:36:19: ISAKMP (0:1): SA is doing pre-shared key authentication plux XAUTH using id type ID_IPV4_ADDR 03:36:19: ISAKMP (1): ID payload next-payload : 10 type : 1 protocol : 17 port : 500 length : 8 03:36:19: ISAKMP (1): Total payload length: 12 03:36:19: CryptoEngine0: generate hmac context for conn id 1 03:36:19: ISAKMP (0:1): sending packet to 209.165.200.225 (R) AG_INIT_EXCH 03:36:19: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY Old State = IKE_R_AM_AAA_AWAIT New State = IKE_R_AM2 03:36:27: ISAKMP (0:1): received packet from 209.165.200.225 (R) AG_INIT_EXCH 03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) AG_INIT_EXCH 03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) AG_INIT_EXCH 03:36:28: ISAKMP (0:1): processing HASH payload. message ID = 0 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): processing NOTIFY INITIAL_CONTACT protocol 1 spi 0, message ID = 0, sa = 63393F7C 03:36:28: ISAKMP (0:1): Process initial contact, bring down existing phase 1 and 2 SA's 03:36:28: ISAKMP (0:1): returning IP addr to the address pool 03:36:28: ISAKMP (0:1): peer does not do paranoid keepalives. 03:36:28: ISAKMP (0:1): processing vendor id payload 03:36:28: ISAKMP (0:1): vendor ID is DPD !--- Phase 1 is now complete and ISAKMP SA is negoitated. 03:36:28: ISAKMP (0:1): SA has been authenticated with 209.165.200.225 03:36:28: CryptoEngine0: clear dh number for conn id 1 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) QM_IDLE 03:36:28: ISAKMP (0:1): purging node -2033367886 03:36:28: ISAKMP: Sending phase 1 responder lifetime 86400 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH Old State = IKE_R_AM2 New State = IKE_P1_COMPLETE 03:36:28: IPSEC(key_engine): got a queue event... 03:36:28: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP 03:36:28: IPSEC(key_engine_delete_sas): delete all SAs shared with 209.165.200.225 !--- Proceed to the Extended Authentication. !--- Remember that XAUTH is done before Phase 2 and after Phase 1. 03:36:28: ISAKMP (0:1): Need XAUTH 03:36:28: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE Old State = IKE_P1_COMPLETE New State = IKE_XAUTH_AAA_START_LOGIN_AWAIT 03:36:28: ISAKMP: got callback 1 03:36:28: ISAKMP/xauth: request attribute XAUTH_TYPE_V2 03:36:28: ISAKMP/xauth: request attribute XAUTH_MESSAGE_V2 03:36:28: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2 03:36:28: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): initiating peer config to 209.165.200.225. ID = 1189186805 03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) CONF_XAUTH 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, IKE_AAA_START_LOGIN Old State = IKE_XAUTH_AAA_START_LOGIN_AWAIT New State = IKE_XAUTH_REQ_SENT 03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) CONF_XAUTH 03:36:28: ISAKMP (0:1): processing transaction payload from 209.165.200.225. message ID = 1189186805 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP: Config payload REPLY 03:36:28: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2 03:36:28: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2 03:36:28: ISAKMP (0:1): deleting node 1189186805 error FALSE reason "done with xauth request/reply exchange" 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY Old State = IKE_XAUTH_REQ_SENT New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT 03:36:28: ISAKMP: got callback 1 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): initiating peer config to 209.165.200.225. ID = 1490194005 03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) CONF_XAUTH 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT New State = IKE_XAUTH_SET_SENT 03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) CONF_XAUTH 03:36:28: ISAKMP (0:1): processing transaction payload from 209.165.200.225. message ID = 1490194005 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP: Config payload ACK 03:36:28: ISAKMP (0:1): XAUTH ACK Processed 03:36:28: ISAKMP (0:1): deleting node 1490194005 error FALSE reason "done with transaction" 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK Old State = IKE_XAUTH_SET_SENT New State = IKE_P1_COMPLETE 03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 03:36:28: ISAKMP (0:1): processing transaction payload from 209.165.200.225. message ID = 113305927 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP: Config payload REQUEST 03:36:28: ISAKMP (0:1): checking request: 03:36:28: ISAKMP: IP4_DNS 03:36:28: ISAKMP: IP4_DNS 03:36:28: ISAKMP: IP4_NBNS 03:36:28: ISAKMP: IP4_NBNS 03:36:28: ISAKMP: SPLIT_INCLUDE 03:36:28: ISAKMP: DEFAULT_DOMAIN 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7005 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7007 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7800 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7801 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7802 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7803 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7804 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7805 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7806 03:36:28: ISAKMP: UNKNOWN Unknown Attr: 0x7009 03:36:28: ISAKMP: APPLICATION_VERSION 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST Old State = IKE_P1_COMPLETE New State = IKE_CONFIG_AUTHOR_AAA_AWAIT 03:36:28: ISAKMP (0:1): Unknown Input: state = IKE_CONFIG_AUTHOR_AAA_AWAIT, major, minor = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE 03:36:28: ISAKMP: got callback 1 03:36:28: ISAKMP (0:1): Config attributes requested butconfig attributes not in crypto map. Sending empty reply. 03:36:28: ISAKMP (0:1): attributes sent in message: 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7005) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7007) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7800) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7801) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7802) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7803) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7804) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7805) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7806) 03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7009) 03:36:28: ISAKMP: Sending APPLICATION_VERSION string: Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-JK9S-M), Version 12.2(8)T1, RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sun 31-Mar-02 03:30 by ccai 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): responding to peer config from 209.165.200.225. ID = 113305927 03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) CONF_ADDR 03:36:28: ISAKMP (0:1): deleting node 113305927 error FALSE reason "" 03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT New State = IKE_P1_COMPLETE 03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): processing HASH payload. message ID = 1022849755 03:36:28: ISAKMP (0:1): processing SA payload. message ID = 1022849755 !--- ISAKMP now verifies the IPSec proposal !--- to see if it is acceptable. 03:36:28: ISAKMP (0:1): Checking IPSec proposal 1 03:36:28: ISAKMP: transform 1, ESP_3DES 03:36:28: ISAKMP: attributes in transform: 03:36:28: ISAKMP: SA life type in seconds 03:36:28: ISAKMP: SA life duration (VPI) of 0x7F 0xFF 0xFF 0xFF 03:36:28: ISAKMP: encaps is 1 03:36:28: ISAKMP: authenticator is HMAC-SHA 03:36:28: validate proposal 0 03:36:28: ISAKMP (0:1): atts are acceptable. !--- As the attributes are acceptable, ISAKMP asks !--- IPSec to validate the proposal. 03:36:28: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, local_proxy= 209.165.202.129/255.255.255.255/0/0 (type=1), remote_proxy= 209.165.200.225/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 03:36:28: validate proposal request 0 03:36:28: ISAKMP (0:1): processing NONCE payload. message ID = 1022849755 03:36:28: ISAKMP (0:1): processing ID payload. message ID = 1022849755 03:36:28: ISAKMP (0:1): processing ID payload. message ID = 1022849755 03:36:28: ISAKMP (0:1): asking for 1 spis from ipsec 03:36:28: ISAKMP (0:1): Node 1022849755, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE 03:36:28: IPSEC(key_engine): got a queue event... 03:36:28: IPSEC(spi_response): getting spi 1910172102 for SA from 209.165.202.129 to 209.165.200.225 for prot 3 03:36:28: ISAKMP: received ke message (2/1) 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) QM_IDLE 03:36:28: ISAKMP (0:1): Node 1022849755, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 03:36:28: CryptoEngine0: generate hmac context for conn id 1 03:36:28: ipsec allocate flow 0 03:36:28: ipsec allocate flow 0 !--- After IPSec validates the proposal, !--- IPSec proceeds to create the IPSec SAs. 03:36:28: ISAKMP (0:1): Creating IPSec SAs 03:36:28: inbound SA from 209.165.200.225 to 209.165.202.129 (proxy 209.165.200.225 to 209.165.202.129) 03:36:28: has spi 0x71DAE9C6 and conn_id 2000 and flags 4 03:36:28: lifetime of 2147483647 seconds 03:36:28: outbound SA from 209.165.202.129 to 209.165.200.225 (proxy 209.165.202.129 to 209.165.200.225) 03:36:28: has spi 101033821 and conn_id 2001 and flags C 03:36:28: lifetime of 2147483647 seconds 03:36:28: ISAKMP (0:1): deleting node 1022849755 error FALSE reason "quick mode done (await()" 03:36:28: ISAKMP (0:1): Node 1022849755, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE 03:36:28: IPSEC(key_engine): got a queue event... 03:36:28: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, !--- This is the management tunnel. local_proxy= 209.165.202.129/0.0.0.0/0/0 (type=1), remote_proxy= 209.165.200.225/0.0.0.0/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 2147483647s and 0kb, spi= 0x71DAE9C6(1910172102), conn_id= 2000, keysize= 0, flags= 0x4 03:36:28: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 209.165.202.129, remote= 209.165.200.225, local_proxy= 209.165.202.129/0.0.0.0/0/0 (type=1), remote_proxy= 209.165.200.225/0.0.0.0/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac, lifedur= 2147483647s and 0kb, spi= 0x605A75D(101033821), conn_id= 2001, keysize= 0, flags= 0xC 03:36:28: IPSEC(create_sa): sa created, (sa) sa_dest= 209.165.202.129, sa_prot= 50, sa_spi= 0x71DAE9C6(1910172102), sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2000 03:36:28: IPSEC(create_sa): sa created, (sa) sa_dest= 209.165.200.225, sa_prot= 50, sa_spi= 0x605A75D(101033821), sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2001 03:36:28: ISAKMP: received ke message (4/1) 03:36:28: ISAKMP: Locking CONFIG struct 0x631B752C for crypto_ikmp_config_handle_kei_mess, count 2 03:36:32: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 03:36:32: CryptoEngine0: generate hmac context for conn id 1 03:36:32: ISAKMP (0:1): processing HASH payload. message ID = 852253052 03:36:32: ISAKMP (0:1): processing SA payload. message ID = 852253052 03:36:32: ISAKMP (0:1): Checking IPSec proposal 1 03:36:32: ISAKMP: transform 1, ESP_3DES 03:36:32: ISAKMP: attributes in transform: 03:36:32: ISAKMP: SA life type in seconds 03:36:32: ISAKMP: SA life duration (VPI) of 0x7F 0xFF 0xFF 0xFF 03:36:32: ISAKMP: encaps is 1 03:36:32: ISAKMP: authenticator is HMAC-SHA 03:36:32: validate proposal 0 03:36:32: ISAKMP (0:1): atts are acceptable. 03:36:32: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.48.66.0/255.255.254.0/0/0 (type=4), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 03:36:32: validate proposal request 0 03:36:32: ISAKMP (0:1): processing NONCE payload. message ID = 852253052 03:36:32: ISAKMP (0:1): processing ID payload. message ID = 852253052 03:36:32: ISAKMP (0:1): processing ID payload. message ID = 852253052 03:36:32: ISAKMP (0:1): asking for 1 spis from ipsec 03:36:32: ISAKMP (0:1): Node 852253052, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE 03:36:32: IPSEC(key_engine): got a queue event... 03:36:32: IPSEC(spi_response): getting spi 3997625134 for SA from 209.165.202.129 to 209.165.200.225 for prot 3 03:36:32: ISAKMP: received ke message (2/1) 03:36:32: CryptoEngine0: generate hmac context for conn id 1 03:36:32: ISAKMP (0:1): sending packet to 209.165.200.225 (R) QM_IDLE 03:36:32: ISAKMP (0:1): Node 852253052, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 03:36:32: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 03:36:32: CryptoEngine0: generate hmac context for conn id 1 03:36:32: ipsec allocate flow 0 03:36:32: ipsec allocate flow 0 03:36:32: ISAKMP (0:1): Creating IPSec SAs 03:36:32: inbound SA from 209.165.200.225 to 209.165.202.129 (proxy 10.48.66.0 to 0.0.0.0) 03:36:32: has spi 0xEE46EB2E and conn_id 2002 and flags 4 03:36:32: lifetime of 2147483647 seconds 03:36:32: outbound SA from 209.165.202.129 to 209.165.200.225 (proxy 0.0.0.0 to 10.48.66.0) 03:36:32: has spi 674305339 and conn_id 2003 and flags C 03:36:32: lifetime of 2147483647 seconds 03:36:32: ISAKMP (0:1): deleting node 852253052 error FALSE reason "quick mode done (await()" 03:36:32: ISAKMP (0:1): Node 852253052, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE 03:36:32: IPSEC(key_engine): got a queue event... !--- IPSec now initializes the SAs as these are !--- stored in the SA Database. 03:36:32: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, !--- This SA is for the actual data traffic between the !--- networks behind the VPN Client and the Cisco IOS router. local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.48.66.0/255.255.254.0/0/0 (type=4), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 2147483647s and 0kb, spi= 0xEE46EB2E(3997625134), conn_id= 2002, keysize= 0, flags= 0x4 03:36:32: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 209.165.202.129, remote= 209.165.200.225, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.48.66.0/255.255.254.0/0/0 (type=4), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 2147483647s and 0kb, spi= 0x2831153B(674305339), conn_id= 2003, keysize= 0, flags= 0xC 03:36:32: IPSEC(create_sa): sa created, (sa) sa_dest= 209.165.202.129, sa_prot= 50, sa_spi= 0xEE46EB2E(3997625134), sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2002 03:36:32: IPSEC(create_sa): sa created, (sa) sa_dest= 209.165.200.225, sa_prot= 50, sa_spi= 0x2831153B(674305339), sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2003 03:36:32: ISAKMP: received ke message (4/1) 03:36:32: ISAKMP: Locking CONFIG struct 0x631B752C for crypto_ikmp_config_handle_kei_mess, count 3
Selecteer vanuit de VPN Client GUI de optie Configuratie > Systeem > Gebeurtenissen > Klassen en schakel IKE, IKEDBG, IPSEC en IPSECDBG in op niveau 13 naar de SYSLOG. Vergeet niet om de debugs uit te schakelen nadat uw testen is voltooid.
VPN 3002 hardwareclient debugt |
---|
297 06/03/2002 11:02:30.100 SEV=7 IPSECDBG/14 RPT=3 !--- The VPN Client attempts to connect to the headend. !--- In this case, it is Cisco IOS. Sending KEY_ACQUIRE to IKE for src 209.165.200.225, dst 209.165.202.129 298 06/03/2002 11:02:30.100 SEV=8 IKEDBG/0 RPT=108 pitcher: received a key acquire message! 299 06/03/2002 11:02:30.100 SEV=4 IKE/41 RPT=135 209.165.202.129 IKE Initiator: New Phase 1, Intf 2, IKE Peer 209.165.202.129 local Proxy Address 209.165.200.225, remote Proxy Address 209.165.202.129, SA (ESP-3DES-MD5) 302 06/03/2002 11:02:30.100 SEV=9 IKEDBG/0 RPT=109 209.165.202.129 constructing ISA_SA for isakmp 303 06/03/2002 11:02:30.230 SEV=9 IKEDBG/0 RPT=110 209.165.202.129 constructing ke payload 304 06/03/2002 11:02:30.230 SEV=9 IKEDBG/1 RPT=30 209.165.202.129 constructing nonce payload 305 06/03/2002 11:02:30.230 SEV=9 IKEDBG/1 RPT=31 209.165.202.129 constructing ID 306 06/03/2002 11:02:30.230 SEV=9 IKEDBG/46 RPT=4 209.165.202.129 constructing xauth V6 VID payload 307 06/03/2002 11:02:30.230 SEV=9 IKEDBG/46 RPT=5 209.165.202.129 constructing VID payload 308 06/03/2002 11:02:30.230 SEV=9 IKEDBG/48 RPT=2 209.165.202.129 Send Cisco Unity client VID 309 06/03/2002 11:02:30.230 SEV=8 IKEDBG/0 RPT=111 209.165.202.129 SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + VENDOR (13) + NONE ( 0) ... total length : 541 312 06/03/2002 11:02:30.520 SEV=8 IKEDBG/0 RPT=112 209.165.202.129 RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + KE (4) + ID (5) + NONCE (10) + HASH (8) + NONE (0) ... total length : 348 315 06/03/2002 11:02:30.530 SEV=8 IKEDBG/0 RPT=113 209.165.202.129 RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + KE (4) + ID (5) + NONCE (10) + HASH (8) + NONE (0) ... total length : 348 318 06/03/2002 11:02:30.530 SEV=9 IKEDBG/0 RPT=114 209.165.202.129 processing SA payload 319 06/03/2002 11:02:30.530 SEV=7 IKEDBG/0 RPT=115 209.165.202.129 Oakley proposal is acceptable 320 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=5 209.165.202.129 processing VID payload 321 06/03/2002 11:02:30.530 SEV=9 IKEDBG/49 RPT=4 209.165.202.129 Received Cisco Unity client VID 322 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=6 209.165.202.129 processing VID payload 323 06/03/2002 11:02:30.530 SEV=9 IKEDBG/49 RPT=5 209.165.202.129 Received DPD VID 324 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=7 209.165.202.129 processing VID payload 325 06/03/2002 11:02:30.530 SEV=9 IKEDBG/38 RPT=2 209.165.202.129 Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 0000007f) 326 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=8 209.165.202.129 processing VID payload 327 06/03/2002 11:02:30.530 SEV=9 IKEDBG/49 RPT=6 209.165.202.129 !--- The VPN Client understands that it needs !--- to go through Extended authentication to !--- bring the tunnel up. Received xauth V6 VID 328 06/03/2002 11:02:30.530 SEV=9 IKEDBG/0 RPT=116 209.165.202.129 processing ke payload 329 06/03/2002 11:02:30.530 SEV=9 IKEDBG/0 RPT=117 209.165.202.129 processing ISA_KE 330 06/03/2002 11:02:30.530 SEV=9 IKEDBG/1 RPT=32 209.165.202.129 Processing ID 331 06/03/2002 11:02:30.530 SEV=9 IKEDBG/1 RPT=33 209.165.202.129 processing nonce payload 332 06/03/2002 11:02:30.660 SEV=9 IKEDBG/0 RPT=118 209.165.202.129 Generating keys for Initiator... 333 06/03/2002 11:02:30.670 SEV=9 IKEDBG/0 RPT=119 209.165.202.129 Group [209.165.202.129] processing hash 334 06/03/2002 11:02:30.670 SEV=9 IKEDBG/0 RPT=120 209.165.202.129 Group [209.165.202.129] computing hash 335 06/03/2002 11:02:30.680 SEV=9 IKEDBG/0 RPT=121 Group [209.165.202.129] construct hash payload 336 06/03/2002 11:02:30.680 SEV=9 IKEDBG/0 RPT=122 209.165.202.129 Group [209.165.202.129] computing hash 337 06/03/2002 11:02:30.680 SEV=9 IKEDBG/46 RPT=6 209.165.202.129 Group [209.165.202.129] constructing dpd vid payload 338 06/03/2002 11:02:30.680 SEV=8 IKEDBG/0 RPT=123 209.165.202.129 SENDING Message (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + VENDOR (13) + NONE (0) ... total length : 100 340 06/03/2002 11:02:30.690 SEV=8 IKEDBG/0 RPT=124 209.165.202.129 RECEIVED Message (msgid=71c8c9fd) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) ... total length : 92 342 06/03/2002 11:02:30.690 SEV=9 IKEDBG/0 RPT=125 209.165.202.129 Group [209.165.202.129] processing hash 343 06/03/2002 11:02:30.690 SEV=9 IKEDBG/0 RPT=126 209.165.202.129 Group [209.165.202.129] Processing Notify payload 344 06/03/2002 11:02:30.690 SEV=5 IKE/73 RPT=19 209.165.202.129 Group [209.165.202.129] !--- As IOS has a default IKE time of 1 day (86400) seconds !--- and forces the VPN Client to accept this value. !--- This is because Cisco IOS responds and the VPN Client initiates. Responder forcing change of IKE rekeying duration from 2147483647 to 86400 seconds 347 06/03/2002 11:02:30.690 SEV=6 IKE/0 RPT=2 AM AM:843f96f6 received unexpected event EV_RESET_LIFETIME in state AM_RSND_LST_ MSG 349 06/03/2002 11:02:30.700 SEV=8 IKEDBG/0 RPT=127 209.165.202.129 RECEIVED Message (msgid=ecb5af46) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 86 351 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=34 process_attr(): Enter! 352 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=35 Processing cfg Request attributes 353 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=36 Received Xauth Type in request! 354 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=37 Received Xauth Message! 355 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=38 Received Xauth Username request! 356 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=39 Received Xauth Password request! 357 06/03/2002 11:02:30.700 SEV=9 IKEDBG/0 RPT=128 209.165.202.129 Group [209.165.202.129] constructing blank hash 358 06/03/2002 11:02:30.700 SEV=9 IKEDBG/0 RPT=129 209.165.202.129 Group [209.165.202.129] constructing qm hash 359 06/03/2002 11:02:30.700 SEV=8 IKEDBG/0 RPT=130 209.165.202.129 SENDING Message (msgid=ecb5af46) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 77 361 06/03/2002 11:02:30.710 SEV=8 IKEDBG/0 RPT=131 209.165.202.129 RECEIVED Message (msgid=ad808e58) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 64 363 06/03/2002 11:02:30.710 SEV=9 IKEDBG/1 RPT=40 process_attr(): Enter! 364 06/03/2002 11:02:30.710 SEV=9 IKEDBG/1 RPT=41 Processing cfg Request attributes 365 06/03/2002 11:02:30.710 SEV=9 IKEDBG/1 RPT=42 Received Xauth Status Set! 366 06/03/2002 11:02:30.710 SEV=9 IKEDBG/0 RPT=132 209.165.202.129 Group [209.165.202.129] constructing blank hash 367 06/03/2002 11:02:30.710 SEV=9 IKEDBG/0 RPT=133 209.165.202.129 Group [209.165.202.129] constructing qm hash 368 06/03/2002 11:02:30.710 SEV=8 IKEDBG/0 RPT=134 209.165.202.129 SENDING Message (msgid=ad808e58) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 60 370 06/03/2002 11:02:30.720 SEV=9 IKEDBG/0 RPT=135 209.165.202.129 Group [209.165.202.129] constructing blank hash 371 06/03/2002 11:02:30.720 SEV=9 IKEDBG/0 RPT=136 209.165.202.129 Group [209.165.202.129] constructing qm hash 372 06/03/2002 11:02:30.720 SEV=8 IKEDBG/0 RPT=137 209.165.202.129 SENDING Message (msgid=30ce63a8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 231 374 06/03/2002 11:02:30.740 SEV=8 IKEDBG/0 RPT=138 209.165.202.129 RECEIVED Message (msgid=30ce63a8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 313 376 06/03/2002 11:02:30.740 SEV=9 IKEDBG/1 RPT=43 process_attr(): Enter! 377 06/03/2002 11:02:30.740 SEV=9 IKEDBG/1 RPT=44 Processing MODE_CFG Reply attributes !--- The VPN Client processes the mode !--- configuration reply attributes sent by Cisco IOS. 378 06/03/2002 11:02:30.740 SEV=6 IKE/130 RPT=2 209.165.202.129 Group [209.165.202.129] Received unsupported transaction mode attribute: 7 379 06/03/2002 11:02:30.740 SEV=5 IKE/115 RPT=7 209.165.202.129 Group [209.165.202.129] Client rejected NAT enabled IPSec request, falling back to standard IPSec 381 06/03/2002 11:02:30.740 SEV=3 AUTH/24 RPT=7 Tunnel to headend device 209.165.202.129 connected 382 06/03/2002 11:02:30.740 SEV=9 IKEDBG/0 RPT=139 209.165.202.129 Group [209.165.202.129] Oakley begin quick mode 383 06/03/2002 11:02:30.740 SEV=4 IKE/119 RPT=7 209.165.202.129 Group [209.165.202.129] !--- Phase 1 is complete. 384 06/03/2002 11:02:30.740 SEV=6 IKE/121 RPT=2 209.165.202.129 Keep-alive type for this connection: DPD 385 06/03/2002 11:02:30.740 SEV=7 IKEDBG/0 RPT=140 209.165.202.129 Group [209.165.202.129] Starting phase 1 rekey timer: 73440000 (ms) 386 06/03/2002 11:02:30.740 SEV=9 IPSECDBG/6 RPT=15 IPSEC key message parse - msgtype 6, len 200, vers 1, pid 00000000, seq 13, err 0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0, hashKey Len 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 662488, lifetime2 0, dsI d 300 390 06/03/2002 11:02:30.740 SEV=9 IPSECDBG/1 RPT=47 Processing KEY_GETSPI msg! 391 06/03/2002 11:02:30.740 SEV=7 IPSECDBG/13 RPT=3 Reserved SPI 1608220759 392 06/03/2002 11:02:30.740 SEV=8 IKEDBG/6 RPT=3 IKE got SPI from key engine: SPI = 0x5fdb8057 393 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=141 209.165.202.129 Group [209.165.202.129] oakley constucting quick mode 394 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=142 209.165.202.129 Group [209.165.202.129] constructing blank hash 395 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=143 209.165.202.129 Group [209.165.202.129] constructing ISA_SA for ipsec 396 06/03/2002 11:02:30.750 SEV=9 IKEDBG/1 RPT=45 209.165.202.129 Group [209.165.202.129] constructing ipsec nonce payload 397 06/03/2002 11:02:30.750 SEV=9 IKEDBG/1 RPT=46 209.165.202.129 Group [209.165.202.129] constructing proxy ID 398 06/03/2002 11:02:30.750 SEV=7 IKEDBG/0 RPT=144 209.165.202.129 Group [209.165.202.129] Transmitting Proxy Id: !--- This is the SA for management between !--- the VPN Client and Cisco IOS. Local host: 209.165.200.225 Protocol 0 Port 0 Remote host: 209.165.202.129 Protocol 0 Port 0 402 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=145 209.165.202.129 Group [209.165.202.129] constructing qm hash 403 06/03/2002 11:02:30.750 SEV=8 IKEDBG/0 RPT=146 209.165.202.129 SENDING Message (msgid=e429a70e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) ... total leng th : 292 406 06/03/2002 11:02:31.010 SEV=8 IKEDBG/0 RPT=147 209.165.202.129 RECEIVED Message (msgid=e429a70e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0) ... total length : 192 409 06/03/2002 11:02:31.010 SEV=9 IKEDBG/0 RPT=148 209.165.202.129 Group [209.165.202.129] processing hash 410 06/03/2002 11:02:31.010 SEV=9 IKEDBG/0 RPT=149 209.165.202.129 Group [209.165.202.129] processing SA payload 411 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=47 209.165.202.129 Group [209.165.202.129] processing nonce payload 412 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=48 209.165.202.129 Group [209.165.202.129] Processing ID 413 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=49 209.165.202.129 Group [209.165.202.129] Processing ID 414 06/03/2002 11:02:31.020 SEV=9 IKEDBG/0 RPT=150 209.165.202.129 Group [209.165.202.129] Processing Notify payload 415 06/03/2002 11:02:31.020 SEV=5 IKE/73 RPT=20 209.165.202.129 Group [209.165.202.129] Responder forcing change of IPSec rekeying duration from 2147483647 to 3600 seco nds 418 06/03/2002 11:02:31.020 SEV=9 IKEDBG/0 RPT=151 209.165.202.129 Group [209.165.202.129] loading all IPSEC SAs 419 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=50 209.165.202.129 Group [209.165.202.129] Generating Quick Mode Key! 420 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=51 209.165.202.129 Group [209.165.202.129] Generating Quick Mode Key! 421 06/03/2002 11:02:31.020 SEV=7 IKEDBG/0 RPT=152 209.165.202.129 Group [209.165.202.129] Loading host: Dst: 209.165.202.129 Src: 209.165.200.225 423 06/03/2002 11:02:31.020 SEV=4 IKE/49 RPT=13 209.165.202.129 Group [209.165.202.129] Security negotiation complete for peer (209.165.202.129) Initiator, Inbound SPI = 0x5fdb8057, Outbound SPI = 0xa088f2dc 426 06/03/2002 11:02:31.020 SEV=9 IKEDBG/0 RPT=153 209.165.202.129 Group [209.165.202.129] oakley constructing final quick mode 427 06/03/2002 11:02:31.030 SEV=8 IKEDBG/0 RPT=154 209.165.202.129 SENDING Message (msgid=e429a70e) with payloads : HDR + HASH (8) + NONE (0) ... total length : 76 429 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/6 RPT=16 IPSEC key message parse - msgtype 1, len 612, vers 1, pid 00000000, seq 0, err 0 , type 2, mode 1, state 64, label 0, pad 0, spi a088f2dc, encrKeyLen 24, hashKey Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds Id -378167296 433 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=48 Processing KEY_ADD msg! 434 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=49 key_msghdr2secassoc(): Enter 435 06/03/2002 11:02:31.030 SEV=7 IPSECDBG/1 RPT=50 No USER filter configured 436 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=51 KeyProcessAdd: Enter 437 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=52 KeyProcessAdd: Adding outbound SA 438 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=53 KeyProcessAdd: src 209.165.200.225 mask 0.0.0.0, dst 209.165.202.129 mask 0.0.0. 0 440 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=54 KeyProcessAdd: FilterIpsecAddIkeSa success 441 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/6 RPT=17 IPSEC key message parse - msgtype 3, len 332, vers 1, pid 00000000, seq 0, err 0 , type 2, mode 1, state 32, label 0, pad 0, spi 5fdb8057, encrKeyLen 24, hashKey Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds Id -378167296 445 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=55 Processing KEY_UPDATE msg! 446 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=56 Update inbound SA addresses 447 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=57 key_msghdr2secassoc(): Enter 448 06/03/2002 11:02:31.030 SEV=7 IPSECDBG/1 RPT=58 No USER filter configured 449 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=59 KeyProcessUpdate: Enter 450 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=60 KeyProcessUpdate: success 451 06/03/2002 11:02:31.030 SEV=8 IKEDBG/7 RPT=3 IKE got a KEY_ADD msg for SA: SPI = 0xa088f2dc 452 06/03/2002 11:02:31.030 SEV=8 IKEDBG/0 RPT=155 pitcher: rcv KEY_UPDATE, spi 0x5fdb8057 453 06/03/2002 11:02:31.040 SEV=4 IKE/120 RPT=13 209.165.202.129 Group [209.165.202.129] PHASE 2 COMPLETED (msgid=e429a70e) !--- This line indicates that SA establishment !--- for management between the VPN Client and Cisco IOS is complete. 454 06/03/2002 11:02:35.040 SEV=7 IPSECDBG/10 RPT=4 IPSEC ipsec_output() can call key_acquire() because 4 seconds have elapsed since last IKE negotiation began (src 0x0a3042b9, dst 0x00a66e24) 456 06/03/2002 11:02:35.040 SEV=7 IPSECDBG/14 RPT=4 Sending KEY_ACQUIRE to IKE for src 10.48.66.185, dst 0.0.0.0 457 06/03/2002 11:02:35.040 SEV=8 IKEDBG/0 RPT=156 pitcher: received a key acquire message! 458 06/03/2002 11:02:35.040 SEV=4 IKE/41 RPT=136 IKE Initiator: New Phase 2, Intf 2, IKE Peer 209.165.202.129 local Proxy Address 10.48.66.0, remote Proxy Address 0.0.0.0, SA (ESP-3DES-MD5) 460 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=157 209.165.202.129 Group [209.165.202.129] Oakley begin quick mode 461 06/03/2002 11:02:35.040 SEV=9 IPSECDBG/6 RPT=18 IPSEC key message parse - msgtype 6, len 200, vers 1, pid 00000000, seq 14, err 0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0, hashKey Len 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 662488, lifetime2 0, dsI d 300 465 06/03/2002 11:02:35.040 SEV=9 IPSECDBG/1 RPT=61 Processing KEY_GETSPI msg! 466 06/03/2002 11:02:35.040 SEV=7 IPSECDBG/13 RPT=4 Reserved SPI 1819592269 467 06/03/2002 11:02:35.040 SEV=8 IKEDBG/6 RPT=4 IKE got SPI from key engine: SPI = 0x6c74c64d 468 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=158 209.165.202.129 Group [209.165.202.129] oakley constucting quick mode 469 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=159 209.165.202.129 Group [209.165.202.129] constructing blank hash 470 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=160 209.165.202.129 Group [209.165.202.129] constructing ISA_SA for ipsec 471 06/03/2002 11:02:35.040 SEV=9 IKEDBG/1 RPT=52 209.165.202.129 Group [209.165.202.129] constructing ipsec nonce payload 472 06/03/2002 11:02:35.040 SEV=9 IKEDBG/1 RPT=53 209.165.202.129 Group [209.165.202.129] constructing proxy ID 473 06/03/2002 11:02:35.040 SEV=7 IKEDBG/0 RPT=161 209.165.202.129 Group [209.165.202.129] Transmitting Proxy Id: Local subnet: 10.48.66.0 mask 255.255.254.0 Protocol 0 Port 0 Remote subnet: 0.0.0.0 Mask 0.0.0.0 Protocol 0 Port 0 !--- This line indicates the SA for the traffic between !--- the networks behind the VPN Client and Cisco IOS. 477 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=162 209.165.202.129 Group [209.165.202.129] constructing qm hash 478 06/03/2002 11:02:35.040 SEV=8 IKEDBG/0 RPT=163 209.165.202.129 SENDING Message (msgid=a809c6b4) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) ... total leng th : 300 481 06/03/2002 11:02:35.310 SEV=8 IKEDBG/0 RPT=164 209.165.202.129 RECEIVED Message (msgid=a809c6b4) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0) ... total length : 200 484 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=165 209.165.202.129 Group [209.165.202.129] processing hash 485 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=166 209.165.202.129 Group [209.165.202.129] processing SA payload 486 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=54 209.165.202.129 Group [209.165.202.129] processing nonce payload 487 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=55 209.165.202.129 Group [209.165.202.129] Processing ID 488 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=56 209.165.202.129 Group [209.165.202.129] Processing ID 489 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=167 209.165.202.129 Group [209.165.202.129] Processing Notify payload 490 06/03/2002 11:02:35.310 SEV=5 IKE/73 RPT=21 209.165.202.129 Group [209.165.202.129] Responder forcing change of IPSec rekeying duration from 2147483647 to 3600 seco nds 493 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=168 209.165.202.129 Group [209.165.202.129] loading all IPSEC SAs 494 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=57 209.165.202.129 Group [209.165.202.129] Generating Quick Mode Key! 495 06/03/2002 11:02:35.320 SEV=9 IKEDBG/1 RPT=58 209.165.202.129 Group [209.165.202.129] Generating Quick Mode Key! 496 06/03/2002 11:02:35.320 SEV=7 IKEDBG/0 RPT=169 209.165.202.129 Group [209.165.202.129] Loading subnet: Dst: 0.0.0.0 mask: 0.0.0.0 Src: 10.48.66.0 mask: 255.255.254.0 499 06/03/2002 11:02:35.320 SEV=4 IKE/49 RPT=14 209.165.202.129 Group [209.165.202.129] Security negotiation complete for peer (209.165.202.129) Initiator, Inbound SPI = 0x6c74c64d, Outbound SPI = 0x8e34d356 502 06/03/2002 11:02:35.320 SEV=9 IKEDBG/0 RPT=170 209.165.202.129 Group [209.165.202.129] oakley constructing final quick mode 503 06/03/2002 11:02:35.320 SEV=8 IKEDBG/0 RPT=171 209.165.202.129 SENDING Message (msgid=a809c6b4) with payloads : HDR + HASH (8) + NONE (0) ... total length : 76 505 06/03/2002 11:02:35.320 SEV=9 IPSECDBG/6 RPT=19 IPSEC key message parse - msgtype 1, len 612, vers 1, pid 00000000, seq 0, err 0 , type 2, mode 1, state 64, label 0, pad 0, spi 8e34d356, encrKeyLen 24, hashKey Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds Id -378167296 509 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=62 Processing KEY_ADD msg! 510 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=63 key_msghdr2secassoc(): Enter 511 06/03/2002 11:02:35.330 SEV=7 IPSECDBG/1 RPT=64 No USER filter configured 512 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=65 KeyProcessAdd: Enter 513 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=66 KeyProcessAdd: Adding outbound SA 514 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=67 KeyProcessAdd: src 10.48.66.0 mask 0.0.1.255, dst 0.0.0.0 mask 255.255.255.255 515 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=68 KeyProcessAdd: FilterIpsecAddIkeSa success 516 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/6 RPT=20 IPSEC key message parse - msgtype 3, len 332, vers 1, pid 00000000, seq 0, err 0 , type 2, mode 1, state 32, label 0, pad 0, spi 6c74c64d, encrKeyLen 24, hashKey Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds Id -378167296 520 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=69 Processing KEY_UPDATE msg! 521 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=70 Update inbound SA addresses 522 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=71 key_msghdr2secassoc(): Enter 523 06/03/2002 11:02:35.330 SEV=7 IPSECDBG/1 RPT=72 No USER filter configured 524 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=73 KeyProcessUpdate: Enter 525 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=74 KeyProcessUpdate: success 526 06/03/2002 11:02:35.330 SEV=8 IKEDBG/7 RPT=4 IKE got a KEY_ADD msg for SA: SPI = 0x8e34d356 527 06/03/2002 11:02:35.330 SEV=8 IKEDBG/0 RPT=172 pitcher: rcv KEY_UPDATE, spi 0x6c74c64d 528 06/03/2002 11:02:35.330 SEV=4 IKE/120 RPT=14 209.165.202.129 Group [209.165.202.129] PHASE 2 COMPLETED (msgid=a809c6b4) !--- This line indicates that SA establishment !--- for networks between the VPN Client and Cisco IOS is complete. |
Revisie | Publicatiedatum | Opmerkingen |
---|---|---|
1.0 |
03-Jun-2002 |
Eerste vrijgave |