Dit document illustreert de configuratie van IPSec tussen de PIX Easy VPN Remote hardware client en de optie Easy VPN Server beschikbaar in latere releases van Cisco IOS®-software. De Easy VPN Remote optie voor PIX is geïntroduceerd in PIX versie 6.2 en wordt ook aangeduid als hardware client/EzVPN-client. Wanneer de Easy VPN-afstandsbediening op een head-end apparaat aansluit, zijn er minimaal vijf beveiligingsassociaties (SA's), waaronder één Internet Key Exchange (IKE) en vier IPSec-associaties. Wanneer de Easy VPN-afstandsbediening op het head-end aangesloten is, begeeft deze altijd twee IPSec SA's met het IP-adres van de PIX-externe interface naar elk adres achter de VPN-server. Dit kan voor beheerdoeleinden gebruikt worden om verbinding te maken met de externe interface van de PIX vanaf het netwerk achter de Cisco IOS-router (via Secure Shell [SSH], Secure HTTP voor PIX-apparaatbeheer [PDM] of telnet). Het SA wordt gecreëerd door standaard zonder om het even welke configuratie, en de andere twee SAs worden gemaakt voor het gegevensverkeer tussen de netwerken achter de PIX en de Cisco IOS router.
Raadpleeg PIX-to-PIX 6.x: Easy VPN (NEM) Configuration Voorbeeld voor meer informatie over een vergelijkbaar scenario waarin PIX 506 6.x werkt als de Easy VPN-server.
Raadpleeg PIX/ASA 7.x Easy VPN met een ASA 5500 als de server en PIX 506E als het voorbeeld voor de configuratie van de client (NEM) voor meer informatie over een vergelijkbaar scenario waarin PIX/ASA 7.x als de Easy VPN-server werkt.
Raadpleeg PIX/ASA 7.x Easy VPN met een ASA 5500 als de server en Cisco 871 als het Easy VPN Remote Configuration-voorbeeld voor meer informatie over een vergelijkbaar scenario waarin Cisco 871 router werkt als de Easy VPN-afstandsbediening.
Raadpleeg VPN-hardwareclient voor een PIX 501/506 Series security applicatie met VPN 3000 Concentrator Configuration Voorbeeld voor meer informatie over een vergelijkbaar scenario waarin Cisco VPN 3000 Concentrator fungeert als de Easy VPN-server.
Er zijn geen specifieke vereisten van toepassing op dit document.
De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:
PIX-firewall voor softwareversie 6.3(5)
Opmerking: De optie Easy VPN Client op de PIX is geïntroduceerd in versie 6.2.
Cisco 7200 Series IOS-router met softwareversie 12.4(4)T1
Opmerking: De functie Makkelijk VPN Server is geïntroduceerd in versie 12.2(8)T.
De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.
Deze sectie bevat informatie over het configureren van de functies die in dit document worden beschreven.
N.B.: Gebruik het Opdrachtupgereedschap (alleen geregistreerde klanten) om meer informatie te vinden over de opdrachten die in dit document worden gebruikt.
Het netwerk in dit document is als volgt opgebouwd:
Dit document gebruikt deze configuraties:
Cisco IOS-router |
---|
ezvpn_server#show running-config Building configuration... Current configuration : 1894 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ezvpn_server ! boot-start-marker boot system disk1:c7200-adventerprisek9-mz.124-4.T1.bin boot-end-marker ! ! !--- Enable the authentication, authorization, and accounting (AAA) !--- access control model. aaa new-model ! ! !--- Enable X-Auth for user authentication. aaa authentication login userauthen local !--- Enable group authorization. aaa authorization network groupauthor local ! aaa session-id common ! resource policy ! ip subnet-zero ip cef ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !--- For local authentication of the IPSec user, !--- create the user with password. username remoteuser1 password 0 remotepass username cisco password 0 cisco ! ! ! !--- Create an Internet Security Association and Key Management Protocol !--- (ISAKMP) policy for Phase 1 negotiations for the hardware client. crypto isakmp policy 10 hash md5 authentication pre-share group 2 ! !--- Create a group that will be used to specify the !--- Windows Internet Name Service (WINS) and Domain Name System (DNS) !--- servers' addresses to the hardware client for authentication. crypto isakmp client configuration group hwclient key test123 dns 172.22.1.101 wins 172.22.1.102 domain cisco.com pool ippool ! ! !--- Create the Phase 2 Policy for actual data encryption. crypto ipsec transform-set myset esp-des esp-md5-hmac ! !--- Create a dynamic map and apply the transform set that was created above. crypto dynamic-map dynmap 10 set transform-set myset ! ! !--- Create the actual crypto map, and apply !--- the aaa lists that were created earlier. crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0/0 ip address 10.10.10.2 255.255.255.0 duplex half !--- Apply the crypto map on the outside interface. crypto map clientmap ! interface ATM2/0 no ip address shutdown no atm ilmi-keepalive ! interface FastEthernet4/0 no ip address shutdown duplex half ! interface Ethernet5/0 ip address 172.22.1.1 255.255.255.0 duplex half ! interface Ethernet5/1 no ip address shutdown duplex half ! interface Ethernet5/2 no ip address shutdown duplex half ! interface Ethernet5/3 no ip address shutdown duplex half ! !--- Create a pool of addresses to be assigned to the VPN Clients. ip local pool ippool 172.22.1.50 172.22.1.70 ip classless no ip http server no ip http secure-server ! ! ! logging alarm informational ! ! ! ! control-plane ! ! ! ! ! ! gatekeeper shutdown ! ! line con 0 stopbits 1 line aux 0 stopbits 1 line vty 0 4 ! ! end ezvpn_server# |
PIX |
---|
pix506#show running-config : Saved : PIX Version 6.3(5) !--- Specify speed and duplex settings. interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password WwXYvtKrnjXqGbu1 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pix506 domain-name cisco.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names pager lines 24 mtu outside 1500 mtu inside 1500 !--- Define IP addresses for the PIX's inside and outside interfaces. ip address outside 10.10.10.1 255.255.255.0 ip address inside 172.16.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 !--- Define the outside router as the default gateway. !--- Typically this is the IP address of your ISP's router. route outside 0.0.0.0 0.0.0.0 10.10.10.2 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable telnet timeout 5 ssh timeout 5 console timeout 0 !--- Define the VPN peer IP address. vpnclient server 10.10.10.2 !--- Specify whether Client/PAT (Port Address Translation) mode !--- is to be used or whether Network Extension Mode (NEM) is to be used. vpnclient mode network-extension-mode !--- Define Easy VPN Remote parameters. !--- This is the pre-shared key used in IKE negotiation. vpnclient vpngroup hwclient password ******** !--- This is the extended authentication username and password. vpnclient username cisco password ******** !---This enables vpnclient on the PIX. vpnclient enable terminal width 80 Cryptochecksum:fdbd365f0b4cdc6707a50efeeeb8ed44 : end |
Gebruik dit gedeelte om te bevestigen dat de configuratie correct werkt.
Het Uitvoer Tolk (uitsluitend geregistreerde klanten) (OIT) ondersteunt bepaalde show opdrachten. Gebruik de OIT om een analyse van tonen opdrachtoutput te bekijken.
VPN-client maakt opdracht mogelijk - maakt een eenvoudige VPN-afstandsverbinding mogelijk. In NEM, is de tunnel zelfs op wanneer er geen interessant verkeer is om te ruilen met de head-end Easy VPN Server.
pix506(config)#vpnclient enable
toon crypto isakmp beleid-Toont de parameters voor elk IKE beleid.
pix506(config)#show crypto isakmp policy Default protection suite encryption algorithm: DES - Data Encryption Standard (56 bit keys). hash algorithm: Secure Hash Standard authentication method: Rivest-Shamir-Adleman Signature Diffie-Hellman group: #1 (768 bit) lifetime: 86400 seconds, no volume limit
Dit voorbeeld toont output van de show crypto isakmp beleidsopdracht nadat de hardwareclient is ingeschakeld.
pix506(config)#show crypto isakmp policy Protection suite of priority 65001 encryption algorithm: DES - Data Encryption Standard (56 bit keys). hash algorithm: Message Digest 5 authentication method: Pre-Shared Key with XAUTH Diffie-Hellman group: #2 (1024 bit) lifetime: 86400 seconds, no volume limit Protection suite of priority 65002 encryption algorithm: DES - Data Encryption Standard (56 bit keys). hash algorithm: Message Digest 5 authentication method: Pre-Shared Key Diffie-Hellman group: #2 (1024 bit) lifetime: 86400 seconds, no volume limit
toon crypto ipsec transformatie-displays de huidige IPSec transformaties.
pix506(config)#show crypto ipsec transform
Dit voorbeeld toont uitvoer van het bevel tot transformatie van de show crypto ipsec nadat de hardwareclient is geactiveerd. Voordat de client-opdracht wordt gebruikt, was er slechts één standaardopdracht voor ISAKMP. Nadat de opdracht is gegeven, bouwt Easy VPN automatisch vier voorstellen naast de standaardbeschermingsreeks. Daarnaast is er geen IPSec transformatie set voordat Enable wordt gebruikt. De transformatieset wordt dynamisch gebouwd nadat de opdracht is afgegeven.
pix506(config)#show crypto ipsec transform-set Transform set _vpnc_tset_9: { esp-des esp-md5-hmac } will negotiate = { Tunnel, }, Transform set _vpnc_tset_10: { esp-null esp-md5-hmac } will negotiate = { Tunnel, }, Transform set _vpnc_tset_11: { esp-null esp-sha-hmac } will negotiate = { Tunnel, },
toon crypto isakmp sa-Toont alle huidige IKE SAs bij een peer.
pix506(config)#show crypto isakmp sa Total : 1 Embryonic : 0 dst src state pending created 10.10.10.2 10.10.10.1 QM_IDLE 0 2
Laat VPN-client-displays VPN-client of Makkelijk VPN-configuratieinformatie zien.
pix506(config)#show vpnclient LOCAL CONFIGURATION vpnclient server 10.10.10.2 vpnclient mode network-extension-mode vpnclient vpngroup hwclient password ******** vpnclient username cisco password ******** vpnclient enable DOWNLOADED DYNAMIC POLICY Current Server : 10.10.10.2 Primary DNS : 172.22.1.101 Primary WINS : 172.22.1.102 Default Domain : cisco.com PFS Enabled : No Secure Unit Authentication Enabled : No User Authentication Enabled : No Backup Servers : Deleted by order of the headend
toon crypto ipsec sa-displays IPSec SA's die tussen peers zijn gebouwd.
pix506(config)#show crypto ipsec sa interface: outside Crypto map tag: _vpnc_cm, local addr. 10.10.10.1 local ident (addr/mask/prot/port): (10.10.10.1/255.255.255.255/0/0) remote ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0) current_peer: 10.10.10.2:500 PERMIT, flags={origin_is_acl,} #pkts encaps: 3, #pkts encrypt: 3, #pkts digest 3 #pkts decaps: 3, #pkts decrypt: 3, #pkts verify 3 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 !--- As shown here, ping packets were successfully exchanged !--- between the Easy VPN Remote (PIX) and the Easy VPN Server (IOS). local crypto endpt.: 10.10.10.1, remote crypto endpt.: 10.10.10.2 path mtu 1500, ipsec overhead 56, media mtu 1500 current outbound spi: 533f74a9 inbound esp sas: spi: 0xad0984cc(2903082188) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 4, crypto map: _vpnc_cm sa timing: remaining key lifetime (k/sec): (4607999/3001) IV size: 8 bytes replay detection support: Y inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0x533f74a9(1396667561) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 3, crypto map: _vpnc_cm sa timing: remaining key lifetime (k/sec): (4607999/3001) IV size: 8 bytes replay detection support: Y outbound ah sas: outbound pcp sas: local ident (addr/mask/prot/port): (172.16.1.0/255.255.255.0/0/0) remote ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0) current_peer: 10.10.10.2:500 PERMIT, flags={origin_is_acl,} #pkts encaps: 5, #pkts encrypt: 5, #pkts digest 5 #pkts decaps: 5, #pkts decrypt: 5, #pkts verify 5 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 !--- As shown here, ping packets were successfully exchanged !--- between hosts behind the Easy VPN Remote (PIX) and the Easy !--- VPN Server (IOS). local crypto endpt.: 10.10.10.1, remote crypto endpt.: 10.10.10.2 path mtu 1500, ipsec overhead 56, media mtu 1500 current outbound spi: 2eca448b inbound esp sas: spi: 0xc82c0695(3358328469) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 2, crypto map: _vpnc_cm sa timing: remaining key lifetime (k/sec): (4607999/2997) IV size: 8 bytes replay detection support: Y inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0x2eca448b(785007755) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 1, crypto map: _vpnc_cm sa timing: remaining key lifetime (k/sec): (4607999/2988) IV size: 8 bytes replay detection support: Y outbound ah sas: outbound pcp sas:
Toon toegang-lijst-Toont de inhoud van toegangslijsten.
access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 1024) alert-interval 300 access-list _vpnc_acl; 2 elements access-list _vpnc_acl line 1 permit ip 172.16.1.0 255.255.255.0 any (hitcnt=18) access-list _vpnc_acl line 2 permit ip host 10.10.10.1 any (hitcnt=6) !--- The above output shows the dynamically built access lists to identify !--- interesting traffic for encryption.
toon crypto isakmp sa-Toont alle huidige IKE SAs bij een peer.
ezvpn_server#show crypto isakmp sa IPv4 Crypto ISAKMP SA dst src state conn-id slot status 10.10.10.2 10.10.10.1 QM_IDLE 1026 0 ACTIVE
toon crypto ipsec sa-displays IPSec SA's die tussen peers zijn gebouwd.
ezvpn_server#show crypto ipsec sa !--- As shown above, ping packets were successfully exchanged !--- between the Easy VPN Remote (PIX) and the Easy VPN Server (IOS) !--- as well as hosts behind them. interface: FastEthernet0/0 Crypto map tag: clientmap, local addr 10.10.10.2 protected vrf: (none) local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0) remote ident (addr/mask/prot/port): (10.10.10.1/255.255.255.255/0/0) current_peer 10.10.10.1 port 500 PERMIT, flags={} #pkts encaps: 3, #pkts encrypt: 3, #pkts digest: 3 #pkts decaps: 3, #pkts decrypt: 3, #pkts verify: 3 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 10.10.10.2, remote crypto endpt.: 10.10.10.1 path mtu 1500, ip mtu 1500 current outbound spi: 0xAD0984CC(2903082188) inbound esp sas: spi: 0x533F74A9(1396667561) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } conn id: 21, flow_id: SW:21, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4470133/2836) IV size: 8 bytes replay detection support: Y Status: ACTIVE inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0xAD0984CC(2903082188) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } conn id: 22, flow_id: SW:22, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4470133/2834) IV size: 8 bytes replay detection support: Y Status: ACTIVE outbound ah sas: outbound pcp sas: protected vrf: (none) local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0) remote ident (addr/mask/prot/port): (172.16.1.0/255.255.255.0/0/0) current_peer 10.10.10.1 port 500 PERMIT, flags={} #pkts encaps: 5, #pkts encrypt: 5, #pkts digest: 5 #pkts decaps: 5, #pkts decrypt: 5, #pkts verify: 5 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 10.10.10.2, remote crypto endpt.: 10.10.10.1 path mtu 1500, ip mtu 1500 current outbound spi: 0xC82C0695(3358328469) inbound esp sas: spi: 0x2ECA448B(785007755) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } conn id: 23, flow_id: SW:23, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4589382/2832) IV size: 8 bytes replay detection support: Y Status: ACTIVE inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0xC82C0695(3358328469) transform: esp-des esp-md5-hmac , in use settings ={Tunnel, } conn id: 24, flow_id: SW:24, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4589382/2830) IV size: 8 bytes replay detection support: Y Status: ACTIVE outbound ah sas: outbound pcp sas:
Gebruik dit gedeelte om de configuratie van het probleem op te lossen.
Als u de Easy VPN Remote (PIX) en Easy VPN Server (IOS) hebt ingesteld zoals in dit document wordt beschreven en nog steeds problemen ondervindt, verzamel dan de debug-uitvoer van de PIX en de IOS-uitvoer en de show-opdracht voor analyse door het Cisco Technical Assistance Center (TAC). Zie ook Problemen oplossen de PIX om gegevensverkeer door te geven op een bestaande IPSec Tunnel of IP Security Problemen oplossen - Het begrijpen en gebruiken van debug Opdrachten. Schakel IPSec-debugging in op de PIX.
Opmerking: Raadpleeg Belangrijke informatie over debug Commands voordat u debug-opdrachten gebruikt.
debug crypto ipsec-displays de IPSec-onderhandelingen van fase 2.
debug crypto isakmp — Hiermee geeft u de ISAKMP-onderhandelingen van fase 1 weer.
ISAKMP (0): ID payload next-payload : 13 type : 11 protocol : 17 port : 0 length : 12pix506(config)# ISAKMP (0): Total payload length: 16 ISAKMP (0:0): sending NAT-T vendor ID - rev 2 & 3 ISAKMP (0): beginning Aggressive Mode exchange crypto_isakmp_process_block:src:10.10.10.2, dest:10.10.10.1 spt:500 dpt:500 OAK_AG exchange ISAKMP (0): processing SA payload. message ID = 0 !--- The PIX checks the received proposal against !--- its dynamically generated policies looking for a match. ISAKMP (0): Checking ISAKMP transform 1 against priority 65001 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65002 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65003 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65004 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65005 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65006 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65007 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65008 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are not acceptable. Next payload is 0 ISAKMP (0): Checking ISAKMP transform 1 against priority 65009 policy ISAKMP: encryption DES-CBC ISAKMP: hash MD5 ISAKMP: default group 2 ISAKMP: extended auth pre-share (init) ISAKMP: life type in seconds ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 ISAKMP (0): atts are acceptable. Next payload is 0 ISAKMP (0): processing vendor id payload ISAKMP (0): processing vendor id payload ISAKMP (0): remote peer supports dead peer detection ISAKMP (0): processing vendor id payload crypto_isakmp_process_block:src:10.10.10.2, dest:10.10.10.1 spt:500 dpt:500 crypto_isakmp_process_block:src:10.10.10.2, dest:10.10.10.1 spt:500 dpt:500 ISAKMP : attributes being requested crypto_isakmp_process_block:src:10.10.10.2, dest:10.10.10.1 spt:500 dpt:500 ISAKMP (0): beginning Quick Mode exchange, M-ID of -582033986:dd4eddbeIPSEC (key_engine): got a queue event... IPSEC(spi_response): getting spi 0x61cf8d08(1640992008) for SA from 10.10.10.2 to 10.10.10.1 for prot 3 crypto_isakmp_process_block:src:10.10.10.2, dest:10.10.10.1 spt:500 dpt:500 OAK_QM exchange oakley_process_quick_mode: OAK_QM_IDLE ISAKMP (0): processing SA payload. message ID = 3712933310 ISAKMP : Checking IPSec proposal 1 ISAKMP: transform 1, ESP_DES ISAKMP: attributes in transform: ISAKMP: encaps is 1 ISAKMP: SA life type in seconds ISAKMP: SA life duration (basic) of 28800 ISAKMP: SA life type in kilobytes ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 ISAKMP: authenticator is HMAC-MD5 ISAKMP (0): atts are acceptable.IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) dest= 10.10.10.2, src= 10.10.10.1, dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), src_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-des esp-md5-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 ISAKMP (0): processing NONCE payload. message ID = 3712933310 ISAKMP (0): processing ID payload. message ID = 3712933310 ISAKMP (0): processing ID payload. message ID = 3712933310 ISAKMP (0): processing NOTIFY payload 24576 protocol 3 spi 1327036890, message ID = 3712933310 ISAKMP (0): processing responder lifetime ISAKMP (0): responder lifetime of 3600s ISAKMP (0): Creating IPSec SAs inbound SA from 10.10.10.2 to 10.10.10.1 (proxy 0.0.0.0 to 10.10.10.1) has spi 1640992008 and conn_id 1 and flags 4 lifetime of 3600 seconds lifetime of 4608000 kilobytes outbound SA from 10.10.10.1 to 10.10.10.2 (proxy 10.10.10.1 to 0.0.0.0) has spi 1327036890 and conn_id 2 and flags 4 lifetime of 3600 seconds lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event... IPSEC(initialize_sas): , (key eng. msg.) dest= 10.10.10.1, src= 10.10.10.2, dest_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), src_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), protocol= ESP, transform= esp-des esp-md5-hmac , lifedur= 3600s and 4608000kb, spi= 0x61cf8d08(1640992008), conn_id= 1, keysize= 0, flags= 0x4 IPSEC(initialize_sas): , (key eng. msg.) src= 10.10.10.1, dest= 10.10.10.2, src_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), protocol= ESP, transform= esp-des esp-md5-hmac , lifedur= 3600s and 4608000kb, spi= 0x4f18f9da(1327036890), conn_id= 2, keysize= 0, flags= 0x4 !--- The IPSec SAs shown above are for management purposes. VPN Peer: IPSEC: Peer ip:10.10.10.2/500 Ref cnt incremented to:2 Total VPN Peers:1 VPN Peer: IPSEC: Peer ip:10.10.10.2/500 Ref cnt incremented to:3 Total VPN Peers:1 return status is IKMP_NO_ERROR ISAKMP (0): beginning Quick Mode exchange, M-ID of -419501328:e6feeaf0IPSEC (key_engine): got a queue event... IPSEC(spi_response): getting spi 0xf3d52246(4090831430) for SA from 10.10.10.2 to 10.10.10.1 for prot 3 crypto_isakmp_process_block:src:10.10.10.2, dest:10.10.10.1 spt:500 dpt:500 OAK_QM exchange oakley_process_quick_mode: OAK_QM_IDLE ISAKMP (0): processing SA payload. message ID = 3875465968 ISAKMP : Checking IPSec proposal 1 ISAKMP: transform 1, ESP_DES ISAKMP: attributes in transform: ISAKMP: encaps is 1 ISAKMP: SA life type in seconds ISAKMP: SA life duration (basic) of 28800 ISAKMP: SA life type in kilobytes ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 ISAKMP: authenticator is HMAC-MD5 ISAKMP (0): atts are acceptable.IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) dest= 10.10.10.2, src= 10.10.10.1, dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), src_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4), protocol= ESP, transform= esp-des esp-md5-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 ISAKMP (0): processing NONCE payload. message ID = 3875465968 ISAKMP (0): processing ID payload. message ID = 3875465968 ISAKMP (0): processing ID payload. message ID = 3875465968 ISAKMP (0): processing NOTIFY payload 24576 protocol 3 spi 465396864, message ID = 3875465968 ISAKMP (0): processing responder lifetime ISAKMP (0): responder lifetime of 3600s ISAKMP (0): Creating IPSec SAs inbound SA from 10.10.10.2 to 10.10.10.1 (proxy 0.0.0.0 to 172.16.1.0) has spi 4090831430 and conn_id 3 and flags 4 lifetime of 3600 seconds lifetime of 4608000 kilobytes outbound SA from 10.10.10.1 to 10.10.10.2 (proxy 172.16.1.0 to 0.0.0.0) has spi 465396864 and conn_id 4 and flags 4 lifetime of 3600 seconds lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event... IPSEC(initialize_sas): , (key eng. msg.) dest= 10.10.10.1, src= 10.10.10.2, dest_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4), src_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), protocol= ESP, transform= esp-des esp-md5-hmac , lifedur= 3600s and 4608000kb, spi= 0xf3d52246(4090831430), conn_id= 3, keysize= 0, flags= 0x4 IPSEC(initialize_sas): , (key eng. msg.) src= 10.10.10.1, dest= 10.10.10.2, src_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4), dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), protocol= ESP, transform= esp-des esp-md5-hmac , lifedur= 3600s and 4608000kb, spi= 0x1bbd6480(465396864), conn_id= 4, keysize= 0, flags= 0x4 !--- The IPSec SAs shown above are for actual data traffic. VPN Peer: IPSEC: Peer ip:10.10.10.2/500 Ref cnt incremented to:4 Total VPN Peers:1 VPN Peer: IPSEC: Peer ip:10.10.10.2/500 Ref cnt incremented to:5 Total VPN Peers:1
Opmerking: Raadpleeg Belangrijke informatie over debug Commands voordat u debug-opdrachten gebruikt.
debug van crypto ipsec-displays gedetailleerde IPSec-gebeurtenissen.
debug van crypto isakmp-displays over IKE gebeurtenissen.
debug van crypto motor-displays het verkeer dat versleuteld wordt.
!--- As soon as the vpnclient enable command is issued on the PIX, !--- the IOS device receives an IKE negotiation request. *Jan 20 16:48:22.267: ISAKMP (0:0): received packet from 10.10.10.1 dport 500 sport 500 Global (N) NEW SA *Jan 20 16:48:22.271: ISAKMP: Created a peer struct for 10.10.10.1, peer port 500 *Jan 20 16:48:22.271: ISAKMP: New peer created peer = 0x6758C6D0 peer_handle = 0x80000026 *Jan 20 16:48:22.271: ISAKMP: Locking peer struct 0x6758C6D0, refcount 1 for crypto_isakmp_process_block *Jan 20 16:48:22.271: ISAKMP:(0):Setting client config settings 6679B340 *Jan 20 16:48:22.271: ISAKMP:(0):(Re)Setting client xauth list and state *Jan 20 16:48:22.271: ISAKMP/xauth: initializing AAA request *Jan 20 16:48:22.271: ISAKMP: local port 500, remote port 500 *Jan 20 16:48:22.271: insert sa successfully sa = 658E0874 *Jan 20 16:48:22.271: ISAKMP:(0): processing SA payload. message ID = 0 *Jan 20 16:48:22.271: ISAKMP:(0): processing ID payload. message ID = 0 *Jan 20 16:48:22.271: ISAKMP (0:0): ID payload next-payload : 13 type : 11 group id : hwclient protocol : 17 port : 0 length : 16 *Jan 20 16:48:22.271: ISAKMP:(0):: peer matches *none* of the profiles *Jan 20 16:48:22.271: ISAKMP:(0): processing vendor id payload *Jan 20 16:48:22.271: ISAKMP:(0): vendor ID seems Unity/DPD but major 215 mismatch *Jan 20 16:48:22.271: ISAKMP:(0): vendor ID is XAUTH *Jan 20 16:48:22.271: ISAKMP:(0): processing vendor id payload *Jan 20 16:48:22.271: ISAKMP:(0): vendor ID is DPD *Jan 20 16:48:22.271: ISAKMP:(0): processing vendor id payload *Jan 20 16:48:22.271: ISAKMP:(0): claimed IOS but failed authentication *Jan 20 16:48:22.271: ISAKMP:(0): processing vendor id payload *Jan 20 16:48:22.271: ISAKMP:(0): vendor ID is Unity *Jan 20 16:48:22.271: ISAKMP:(0): Authentication by xauth preshared *Jan 20 16:48:22.271: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy *Jan 20 16:48:22.271: ISAKMP: encryption AES-CBC *Jan 20 16:48:22.271: ISAKMP: keylength of 256 *Jan 20 16:48:22.271: ISAKMP: hash SHA *Jan 20 16:48:22.271: ISAKMP: default group 2 *Jan 20 16:48:22.271: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.271: ISAKMP: life type in seconds *Jan 20 16:48:22.271: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.271: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.271: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.271: ISAKMP:(0):Checking ISAKMP transform 2 against priority 10 policy *Jan 20 16:48:22.271: ISAKMP: encryption AES-CBC *Jan 20 16:48:22.275: ISAKMP: keylength of 256 *Jan 20 16:48:22.275: ISAKMP: hash MD5 *Jan 20 16:48:22.275: ISAKMP: default group 2 *Jan 20 16:48:22.275: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.275: ISAKMP: life type in seconds *Jan 20 16:48:22.275: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.275: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.275: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.275: ISAKMP:(0):Checking ISAKMP transform 3 against priority 10 policy *Jan 20 16:48:22.275: ISAKMP: encryption AES-CBC *Jan 20 16:48:22.275: ISAKMP: keylength of 192 *Jan 20 16:48:22.275: ISAKMP: hash SHA *Jan 20 16:48:22.275: ISAKMP: default group 2 *Jan 20 16:48:22.275: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.275: ISAKMP: life type in seconds *Jan 20 16:48:22.275: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.275: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.275: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.275: ISAKMP:(0):Checking ISAKMP transform 4 against priority 10 policy *Jan 20 16:48:22.275: ISAKMP: encryption AES-CBC *Jan 20 16:48:22.275: ISAKMP: keylength of 192 *Jan 20 16:48:22.275: ISAKMP: hash MD5 *Jan 20 16:48:22.275: ISAKMP: default group 2 *Jan 20 16:48:22.275: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.275: ISAKMP: life type in seconds *Jan 20 16:48:22.275: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.275: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.275: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.275: ISAKMP:(0):Checking ISAKMP transform 5 against priority 10 policy *Jan 20 16:48:22.275: ISAKMP: encryption AES-CBC *Jan 20 16:48:22.275: ISAKMP: keylength of 128 *Jan 20 16:48:22.275: ISAKMP: hash SHA *Jan 20 16:48:22.275: ISAKMP: default group 2 *Jan 20 16:48:2f 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.275: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.275: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.275: ISAKMP:(0):Checking ISAKMP transform 6 against priority 10 policy *Jan 20 16:48:22.275: ISAKMP: encryption AES-CBC *Jan 20 16:48:22.275: ISAKMP: keylength of 128 *Jan 20 16:48:22.275: ISAKMP: hash MD52.275: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.275: ISAKMP: life type in seconds *Jan 20 16:48:22.275: ISAKMP: life duration (VPI) o *Jan 20 16:48:22.275: ISAKMP: default group 2 *Jan 20 16:48:22.275: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.275: ISAKMP: life type in seconds *Jan 20 16:48:22.275: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.275: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.275: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.275: ISAKMP:(0):Checking ISAKMP transform 7 against priority 10 policy *Jan 20 16:48:22.275: ISAKMP: encryption 3DES-CBC *Jan 20 16:48:22.275: ISAKMP: hash SHA *Jan 20 16:48:22.275: ISAKMP: default group 2 *Jan 20 16:48:22.275: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.279: ISAKMP: life type in seconds *Jan 20 16:48:22.279: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.279: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.279: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.279: ISAKMP:(0):Checking ISAKMP transform 8 against priority 10 policy *Jan 20 16:48:22.279: ISAKMP: encryption 3DES-CBC *Jan 20 16:48:22.279: ISAKMP: hash MD5 *Jan 20 16:48:22.279: ISAKMP: default group 2 *Jan 20 16:48:22.279: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.279: ISAKMP: life type in seconds *Jan 20 16:48:22.279: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.279: ISAKMP:(0):Encryption algorithm offered does not match policy! *Jan 20 16:48:22.279: ISAKMP:(0):atts are not acceptable. Next payload is 3 *Jan 20 16:48:22.279: ISAKMP:(0):Checking ISAKMP transform 9 against priority 10 policy *Jan 20 16:48:22.279: ISAKMP: encryption DES-CBC *Jan 20 16:48:22.279: ISAKMP: hash MD5 *Jan 20 16:48:22.279: ISAKMP: default group 2 *Jan 20 16:48:22.279: ISAKMP: auth XAUTHInitPreShared *Jan 20 16:48:22.279: ISAKMP: life type in seconds *Jan 20 16:48:22.279: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Jan 20 16:48:22.279: ISAKMP:(0):atts are acceptable. Next payload is 3 !--- Both the IOS device and the PIX accept the policy for ISAKMP. *Jan 20 16:48:22.279: ISAKMP:(0): processing KE payload. message ID = 0 *Jan 20 16:48:22.279: crypto_engine: Create DH shared secret *Jan 20 16:48:22.279: crypto_engine: Modular Exponentiation *Jan 20 16:48:22.319: ISAKMP:(0): processing NONCE payload. message ID = 0 *Jan 20 16:48:22.319: ISAKMP:(0): vendor ID is NAT-T v3 *Jan 20 16:48:22.319: ISAKMP:(0): vendor ID is NAT-T v2 *Jan 20 16:48:22.319: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH *Jan 20 16:48:22.319: ISAKMP:(0):Old State = IKE_READY New State = IKE_R_AM_AAA_AWAIT *Jan 20 16:48:22.319: crypto_engine: Create IKE SA *Jan 20 16:48:22.319: crypto engine: deleting DH phase 2 SW:38 *Jan 20 16:48:22.319: crypto_engine: Delete DH shared secret *Jan 20 16:48:22.319: ISAKMP:(1030): constructed NAT-T vendor-03 ID *Jan 20 16:48:22.319: ISAKMP:(1030):SA is doing pre-shared key authentication plus XAUTH using id type ID_IPV4_ADDR *Jan 20 16:48:22.323: ISAKMP (0:1030): ID payload next-payload : 10 type : 1 address : 10.10.10.2 protocol : 17 port : 0 length : 12 *Jan 20 16:48:22.323: ISAKMP:(1030):Total payload length: 12 *Jan 20 16:48:22.323: crypto_engine: Generate IKE hash *Jan 20 16:48:22.323: ISAKMP:(1030): sending packet to 10.10.10.1 my_port 500 peer_port 500 (R) AG_INIT_EXCH *Jan 20 16:48:22.323: ISAKMP:(1030):Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY *Jan 20 16:48:22.323: ISAKMP:(1030):Old State = IKE_R_AM_AAA_AWAIT New State = IKE_R_AM2 *Jan 20 16:48:22.479: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) AG_INIT_EXCH *Jan 20 16:48:22.479: crypto_engine: Decrypt IKE packet *Jan 20 16:48:22.479: ISAKMP:received payload type 20 *Jan 20 16:48:22.479: ISAKMP:received payload type 20 *Jan 20 16:48:22.479: ISAKMP:(1030): processing HASH payload. message ID = 0 *Jan 20 16:48:22.479: crypto_engine: Generate IKE hash *Jan 20 16:48:22.483: ISAKMP:(1030): processing NOTIFY INITIAL_CONTACT protocol 1 spi 0, message ID = 0, sa = 658E0874 *Jan 20 16:48:22.483: ISAKMP:(1030):SA authentication status: authenticated *Jan 20 16:48:22.483: ISAKMP:(1030):SA has been authenticated with 10.10.10.1 *Jan 20 16:48:22.483: ISAKMP:(1030):SA authentication status: authenticated *Jan 20 16:48:22.483: ISAKMP:(1030): Process initial contact, bring down existing phase 1 and 2 SA's with local 10.10.10.2 remote 10.10.10.1 remote port 500 *Jan 20 16:48:22.483: ISAKMP:(1030):returning IP addr to the address pool *Jan 20 16:48:22.483: ISAKMP: Trying to insert a peer 10.10.10.2/10.10.10.1/500/, and inserted successfully 6758C6D0. *Jan 20 16:48:22.483: IPSEC(key_engine): got a queue event with 1 KMI message(s) *Jan 20 16:48:22.483: ISAKMP: set new node -1980405900 to CONF_XAUTH *Jan 20 16:48:22.483: crypto_engine: Generate IKE hash *Jan 20 16:48:22.483: ISAKMP:(1030):Sending NOTIFY RESPONDER_LIFETIME protocol 1 spi 1727476520, message ID = -1980405900 *Jan 20 16:48:22.483: crypto_engine: Encrypt IKE packet *Jan 20 16:48:22.483: ISAKMP:(1030): sending packet to 10.10.10.1 my_port 500 peer_port 500 (R) QM_IDLE *Jan 20 16:48:22.483: ISAKMP:(1030):purging node -1980405900 *Jan 20 16:48:22.483: ISAKMP: Sending phase 1 responder lifetime 86400 *Jan 20 16:48:22.483: ISAKMP:(1030):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH *Jan 20 16:48:22.483: ISAKMP:(1030):Old State = IKE_R_AM2 New State = IKE_P1_COMPLETE *Jan 20 16:48:22.483: ISAKMP:(1030):Need XAUTH !--- The IOS device now processes the Extended Authentication phase !--- after Phase 1 is successful. *Jan 20 16:48:22.483: ISAKMP: set new node -791275911 to CONF_XAUTH *Jan 20 16:48:22.487: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2 *Jan 20 16:48:22.487: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2 *Jan 20 16:48:22.487: crypto_engine: Generate IKE hash *Jan 20 16:48:22.487: ISAKMP:(1030): initiating peer config to 10.10.10.1. ID = -791275911 *Jan 20 16:48:22.487: crypto_engine: Encrypt IKE packet *Jan 20 16:48:22.487: ISAKMP:(1030): sending packet to 10.10.10.1 my_port 500 peer_port 500 (R) CONF_XAUTH *Jan 20 16:48:22.487: ISAKMP:(1030):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE *Jan 20 16:48:22.487: ISAKMP:(1030):Old State = IKE_P1_COMPLETE New State = IKE_XAUTH_REQ_SENT *Jan 20 16:48:22.519: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) CONF_XAUTH *Jan 20 16:48:22.519: crypto_engine: Decrypt IKE packet *Jan 20 16:48:22.519: ISAKMP:(1030):processing transaction payload from 10.10.10.1. message ID = -791275911 *Jan 20 16:48:22.519: crypto_engine: Generate IKE hash *Jan 20 16:48:22.519: ISAKMP: Config payload REPLY *Jan 20 16:48:22.519: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2 *Jan 20 16:48:22.519: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2 *Jan 20 16:48:22.519: ISAKMP:(1030):deleting node -791275911 error FALSE reason "Done with xauth request/reply exchange" *Jan 20 16:48:22.519: ISAKMP:(1030):Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY *Jan 20 16:48:22.519: ISAKMP:(1030):Old State = IKE_XAUTH_REQ_SENT New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT *Jan 20 16:48:22.519: ISAKMP: set new node 44674085 to CONF_XAUTH *Jan 20 16:48:22.519: crypto_engine: Generate IKE hash *Jan 20 16:48:22.519: ISAKMP:(1030): initiating peer config to 10.10.10.1. ID = 44674085 *Jan 20 16:48:22.519: crypto_engine: Encrypt IKE packet *Jan 20 16:48:22.519: ISAKMP:(1030): sending packet to 10.10.10.1 my_port 500 peer_port 500 (R) CONF_XAUTH *Jan 20 16:48:22.519: ISAKMP:(1030):Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN *Jan 20 16:48:22.519: ISAKMP:(1030):Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT New State = IKE_XAUTH_SET_SENT *Jan 20 16:48:22.571: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) CONF_XAUTH *Jan 20 16:48:22.571: crypto_engine: Decrypt IKE packet *Jan 20 16:48:22.571: ISAKMP:(1030):processing transaction payload from 10.10.10.1. message ID = 44674085 *Jan 20 16:48:22.571: crypto_engine: Generate IKE hash *Jan 20 16:48:22.571: ISAKMP: Config payload ACK *Jan 20 16:48:22.571: ISAKMP:(1030): XAUTH ACK Processed *Jan 20 16:48:22.571: ISAKMP:(1030):deleting node 44674085 error FALSE reason "Transaction mode done" *Jan 20 16:48:22.571: ISAKMP:(1030):Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK *Jan 20 16:48:22.571: ISAKMP:(1030):Old State = IKE_XAUTH_SET_SENT New State = IKE_P1_COMPLETE *Jan 20 16:48:22.571: ISAKMP:(1030):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE *Jan 20 16:48:22.571: ISAKMP:(1030):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE !--- Extended authentication is complete, !--- and mode configuration is now processed. *Jan 20 16:48:22.619: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) QM_IDLE *Jan 20 16:48:22.619: ISAKMP: set new node -2005047200 to QM_IDLE *Jan 20 16:48:22.619: crypto_engine: Decrypt IKE packet *Jan 20 16:48:22.623: ISAKMP:(1030):processing transaction payload from 10.10.10.1. message ID = -2005047200 *Jan 20 16:48:22.623: crypto_engine: Generate IKE hash *Jan 20 16:48:22.623: ISAKMP: Config payload REQUEST *Jan 20 16:48:22.623: ISAKMP:(1030):checking request: *Jan 20 16:48:22.623: ISAKMP: DEFAULT_DOMAIN *Jan 20 16:48:22.623: ISAKMP: IP4_NBNS *Jan 20 16:48:22.623: ISAKMP: IP4_DNS *Jan 20 16:48:22.623: ISAKMP: SPLIT_INCLUDE *Jan 20 16:48:22.623: ISAKMP: SPLIT_DNS *Jan 20 16:48:22.623: ISAKMP: PFS *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7800 *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7801 *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7802 *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7803 *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7804 *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7805 *Jan 20 16:48:22.623: ISAKMP: CONFIG_MODE_UNKNOWN Unknown Attr: 0x7806 *Jan 20 16:48:22.623: ISAKMP: BACKUP_SERVER *Jan 20 16:48:22.623: ISAKMP: APPLICATION_VERSION *Jan 20 16:48:22.623: ISAKMP/author: Author request for group hw client successfully sent to AAA *Jan 20 16:48:22.623: ISAKMP:(1030):Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST *Jan 20 16:48:22.623: ISAKMP:(1030):Old State = IKE_P1_COMPLETE New State = IKE_CONFIG_AUTHOR_AAA_AWAIT *Jan 20 16:48:22.623: ISAKMP:(1030):attributes sent in message: *Jan 20 16:48:22.623: ISAKMP: Sending DEFAULT_DOMAIN default domain name: cisco.com *Jan 20 16:48:22.623: ISAKMP: Sending IP4_NBNS server address: 172.22.1.102 *Jan 20 16:48:22.623: ISAKMP: Sending IP4_DNS server address: 172.22.1.101 *Jan 20 16:48:22.623: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7800) *Jan 20 16:48:22.623: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7801) *Jan 20 16:48:22.623: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7802) *Jan 20 16:48:22.623: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7803) *Jan 20 16:48:22.623: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7804) *Jan 20 16:48:22.623: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7805) *Jan 20 16:48:22.627: ISAKMP (0/1030): Unknown Attr: CONFIG_MODE_UNKNOWN (0x7806) *Jan 20 16:48:22.627: ISAKMP: Sending APPLICATION_VERSION string: Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version 12.4(4)T1, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Wed 21-Dec-05 22:58 by ccai *Jan 20 16:48:22.627: crypto_engine: Generate IKE hash *Jan 20 16:48:22.627: ISAKMP:(1030): responding to peer config from 10.10.10.1. ID = -2005047200 *Jan 20 16:48:22.627: crypto_engine: Encrypt IKE packet *Jan 20 16:48:22.627: ISAKMP:(1030): sending packet to 10.10.10.1 my_port 500 peer_port 500 (R) CONF_ADDR *Jan 20 16:48:22.627: ISAKMP:(1030):deleting node -2005047200 error FALSE reason "No Error" *Jan 20 16:48:22.627: ISAKMP:(1030):Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR *Jan 20 16:48:22.627: ISAKMP:(1030):Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT New State = IKE_P1_COMPLETE *Jan 20 16:48:22.627: ISAKMP:(1030):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE *Jan 20 16:48:22.627: ISAKMP:(1030):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Jan 20 16:48:27.695: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) QM_IDLE *Jan 20 16:48:27.695: ISAKMP: set new node 1887305923 to QM_IDLE *Jan 20 16:48:27.695: crypto_engine: Decrypt IKE packet *Jan 20 16:48:27.699: crypto_engine: Generate IKE hash *Jan 20 16:48:27.699: ISAKMP:(1030): processing HASH payload. message ID = 1887305923 *Jan 20 16:48:27.699: ISAKMP:(1030): processing SA payload. message ID = 1887305923 *Jan 20 16:48:27.699: ISAKMP:(1030):Checking IPSec proposal 1 *Jan 20 16:48:27.699: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.699: ISAKMP: attributes in transform: *Jan 20 16:48:27.699: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.699: ISAKMP: SA life type in seconds *Jan 20 16:48:27.699: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.699: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.699: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.699: ISAKMP: authenticator is HMAC-SHA *Jan 20 16:48:27.699: ISAKMP: key length is 256 *Jan 20 16:48:27.699: CryptoEngine0: validate proposal *Jan 20 16:48:27.699: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.699: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.699: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-aes 256 esp-sha-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0 *Jan 20 16:48:27.699: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes 256 esp-sha-hmac } *Jan 20 16:48:27.699: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.699: ISAKMP:(1030):Checking IPSec proposal 2 *Jan 20 16:48:27.699: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.699: ISAKMP: attributes in transform: *Jan 20 16:48:27.699: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.699: ISAKMP: SA life type in seconds *Jan 20 16:48:27.699: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.699: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.699: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.699: ISAKMP: authenticator is HMAC-MD5 *Jan 20 16:48:27.699: ISAKMP: key length is 256 *Jan 20 16:48:27.699: CryptoEngine0: validate proposal *Jan 20 16:48:27.699: ISAKMP:(1030):atts are acceptable. !--- Proceed for processing Phase 2. *Jan 20 16:48:27.699: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.699: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-aes 256 esp-md5-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0 *Jan 20 16:48:27.699: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes 256 esp-md5-hmac } *Jan 20 16:48:27.699: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.703: ISAKMP:(1030):Checking IPSec proposal 3 *Jan 20 16:48:27.703: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.703: ISAKMP: attributes in transform: *Jan 20 16:48:27.703: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.703: ISAKMP: SA life type in seconds *Jan 20 16:48:27.703: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.703: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.703: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.703: ISAKMP: authenticator is HMAC-SHA *Jan 20 16:48:27.703: ISAKMP: key length is 192 *Jan 20 16:48:27.703: CryptoEngine0: validate proposal *Jan 20 16:48:27.703: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.703: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.703: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-aes 192 esp-sha-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 192, flags= 0x0 *Jan 20 16:48:27.703: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes 192 esp-sha-hmac } *Jan 20 16:48:27.703: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.703: ISAKMP:(1030):Checking IPSec proposal 4 *Jan 20 16:48:27.703: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.703: ISAKMP: attributes in transform: *Jan 20 16:48:27.703: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.703: ISAKMP: SA life type in seconds *Jan 20 16:48:27.703: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.703: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.703: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.703: ISAKMP: authenticator is HMAC-MD5 *Jan 20 16:48:27.703: ISAKMP: key length is 192 *Jan 20 16:48:27.703: CryptoEngine0: validate proposal *Jan 20 16:48:27.703: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.703: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.703: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-aes 192 esp-md5-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 192, flags= 0x0 *Jan 20 16:48:27.703: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes 192 esp-md5-hmac } *Jan 20 16:48:27.703: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.703: ISAKMP:(1030):Checking IPSec proposal 5 *Jan 20 16:48:27.703: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.703: ISAKMP: attributes in transform: *Jan 20 16:48:27.703: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.703: ISAKMP: SA life type in seconds *Jan 20 16:48:27.703: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.703: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.707: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.707: ISAKMP: authenticator is HMAC-SHA *Jan 20 16:48:27.707: ISAKMP: key length is 128 *Jan 20 16:48:27.707: CryptoEngine0: validate proposal *Jan 20 16:48:27.707: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.707: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.707: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-aes esp-sha-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0 *Jan 20 16:48:27.707: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes esp-sha-hmac } *Jan 20 16:48:27.707: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.707: ISAKMP:(1030):Checking IPSec proposal 6 *Jan 20 16:48:27.707: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.707: ISAKMP: attributes in transform: *Jan 20 16:48:27.707: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.707: ISAKMP: SA life type in seconds *Jan 20 16:48:27.707: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.707: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.707: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.707: ISAKMP: authenticator is HMAC-MD5 *Jan 20 16:48:27.707: ISAKMP: key length is 128 *Jan 20 16:48:27.707: CryptoEngine0: validate proposal *Jan 20 16:48:27.707: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.707: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.707: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-aes esp-md5-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0 *Jan 20 16:48:27.707: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes esp-md5-hmac } *Jan 20 16:48:27.707: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.707: ISAKMP:(1030):Checking IPSec proposal 7 *Jan 20 16:48:27.707: ISAKMP: transform 1, ESP_3DES *Jan 20 16:48:27.707: ISAKMP: attributes in transform: *Jan 20 16:48:27.707: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.707: ISAKMP: SA life type in seconds *Jan 20 16:48:27.707: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.707: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.707: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.707: ISAKMP: authenticator is HMAC-SHA *Jan 20 16:48:27.711: CryptoEngine0: validate proposal *Jan 20 16:48:27.711: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.711: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.711: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0 *Jan 20 16:48:27.711: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-3des esp-sha-hmac } *Jan 20 16:48:27.711: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.711: ISAKMP:(1030):Checking IPSec proposal 8 *Jan 20 16:48:27.711: ISAKMP: transform 1, ESP_3DES *Jan 20 16:48:27.711: ISAKMP: attributes in transform: *Jan 20 16:48:27.711: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.711: ISAKMP: SA life type in seconds *Jan 20 16:48:27.711: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.711: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.711: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.711: ISAKMP: authenticator is HMAC-MD5 *Jan 20 16:48:27.711: CryptoEngine0: validate proposal *Jan 20 16:48:27.711: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.711: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.711: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0 *Jan 20 16:48:27.715: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-3des esp-md5-hmac } *Jan 20 16:48:27.715: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.715: ISAKMP:(1030):Checking IPSec proposal 9 *Jan 20 16:48:27.715: ISAKMP: transform 1, ESP_DES *Jan 20 16:48:27.715: ISAKMP: attributes in transform: *Jan 20 16:48:27.715: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.715: ISAKMP: SA life type in seconds *Jan 20 16:48:27.715: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.715: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.715: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.715: ISAKMP: authenticator is HMAC-MD5 *Jan 20 16:48:27.715: CryptoEngine0: validate proposal *Jan 20 16:48:27.715: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.715: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.715: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 10.10.10.1/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-des esp-md5-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0 *Jan 20 16:48:27.715: ISAKMP:(1030): processing NONCE payload. message ID = 1887305923 *Jan 20 16:48:27.715: ISAKMP:(1030): processing ID payload. message ID = 1887305923 *Jan 20 16:48:27.715: ISAKMP:(1030): processing ID payload. message ID = 1887305923 *Jan 20 16:48:27.715: ISAKMP:(1030): asking for 1 spis from ipsec *Jan 20 16:48:27.715: ISAKMP:(1030):Node 1887305923, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Jan 20 16:48:27.715: ISAKMP:(1030):Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE *Jan 20 16:48:27.719: IPSEC(key_engine): got a queue event with 1 KMI message(s) *Jan 20 16:48:27.719: IPSEC(spi_response): getting spi 185206738 for SA from 10.10.10.2 to 10.10.10.1 for prot 3 *Jan 20 16:48:27.719: crypto_engine: Generate IKE hash *Jan 20 16:48:27.719: crypto_engine: Generate IKE QM keys *Jan 20 16:48:27.719: crypto_engine: Create IPSec SA (by keys) *Jan 20 16:48:27.719: crypto_engine: Generate IKE QM keys *Jan 20 16:48:27.719: crypto_engine: Create IPSec SA (by keys) *Jan 20 16:48:27.719: ISAKMP:(1030): Creating IPSec SAs *Jan 20 16:48:27.719: inbound SA from 10.10.10.1 to 10.10.10.2 (f/i) 0/ 0 (proxy 10.10.10.1 to 0.0.0.0) *Jan 20 16:48:27.719: has spi 0xB0A07D2 and conn_id 0 *Jan 20 16:48:27.719: lifetime of 28800 seconds *Jan 20 16:48:27.719: lifetime of 4608000 kilobytes *Jan 20 16:48:27.719: outbound SA from 10.10.10.2 to 10.10.10.1 (f/i) 0/0 (proxy 0.0.0.0 to 10.10.10.1) *Jan 20 16:48:27.719: has spi 0xB22446D and conn_id 0 *Jan 20 16:48:27.719: lifetime of 28800 seconds *Jan 20 16:48:27.719: lifetime of 4608000 kilobytes *Jan 20 16:48:27.719: crypto_engine: Encrypt IKE packet *Jan 20 16:48:27.719: ISAKMP:(1030): sending packet to 10.10.10.1 my_port 500 peer_port 500 (R) QM_IDLE *Jan 20 16:48:27.719: ISAKMP:(1030):Node 1887305923, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY *Jan 20 16:48:27.719: ISAKMP:(1030):Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 *Jan 20 16:48:27.719: IPSEC(key_engine): got a queue event with 1 KMI message(s) *Jan 20 16:48:27.723: IPSec: Flow_switching Allocated flow for sibling 80000014 *Jan 20 16:48:27.723: IPSEC(policy_db_add_ident): src 0.0.0.0, dest 10.10.10.1, dest_port 0 *Jan 20 16:48:27.723: IPSEC(create_sa): sa created, (sa) sa_dest= 10.10.10.2, sa_proto= 50, sa_spi= 0xB0A07D2(185206738), sa_trans= esp-des esp-md5-hmac , sa_conn_id= 37 *Jan 20 16:48:27.723: IPSEC(create_sa): sa created, (sa) sa_dest= 10.10.10.1, sa_proto= 50, sa_spi= 0xB22446D(186795117), sa_trans= esp-des esp-md5-hmac , sa_conn_id= 38 !--- The two IPSec SAs shown above are for management purposes. *Jan 20 16:48:27.771: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) QM_IDLE *Jan 20 16:48:27.771: crypto_engine: Decrypt IKE packet *Jan 20 16:48:27.771: crypto_engine: Generate IKE hash *Jan 20 16:48:27.771: ISAKMP:(1030):deleting node 1887305923 error FALSE reason "QM done (await)" *Jan 20 16:48:27.771: ISAKMP:(1030):Node 1887305923, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Jan 20 16:48:27.771: ISAKMP:(1030):Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE *Jan 20 16:48:27.771: IPSEC(key_engine): got a queue event with 1 KMI message(s) *Jan 20 16:48:27.771: IPSEC(key_engine_enable_outbound): rec'd enable notify from ISAKMP *Jan 20 16:48:27.771: IPSEC(key_engine_enable_outbound): enable SA with spi 186795117/50 *Jan 20 16:48:27.771: IPSEC(update_current_outbound_sa): updated peer 10.10.10.1 current outbound sa to SPI B22446D *Jan 20 16:48:27.771: ISAKMP (0:1030): received packet from 10.10.10.1 dport 500 sport 500 Global (R) QM_IDLE *Jan 20 16:48:27.771: ISAKMP: set new node -1259355083 to QM_IDLE *Jan 20 16:48:27.771: crypto_engine: Decrypt IKE packet *Jan 20 16:48:27.775: crypto_engine: Generate IKE hash *Jan 20 16:48:27.775: ISAKMP:(1030): processing HASH payload. message ID = -1259355083 *Jan 20 16:48:27.775: ISAKMP:(1030): processing SA payload. message ID = -1259355083 *Jan 20 16:48:27.775: ISAKMP:(1030):Checking IPSec proposal 1 *Jan 20 16:48:27.775: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.775: ISAKMP: attributes in transform: *Jan 20 16:48:27.775: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.775: ISAKMP: SA life type in seconds *Jan 20 16:48:27.775: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.775: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.775: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.775: ISAKMP: authenticator is HMAC-SHA *Jan 20 16:48:27.775: ISAKMP: key length is 256 *Jan 20 16:48:27.775: CryptoEngine0: validate proposal *Jan 20 16:48:27.775: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.775: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.775: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 10.10.10.2, remote= 10.10.10.1, local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), remote_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4), protocol= ESP, transform= esp-aes 256 esp-sha-hmac (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0 *Jan 20 16:48:27.775: IPSEC(crypto_ipsec_process_proposal): transform proposal not supported for identity: {esp-aes 256 esp-sha-hmac } *Jan 20 16:48:27.775: ISAKMP:(1030): IPSec policy invalidated proposal *Jan 20 16:48:27.775: ISAKMP:(1030):Checking IPSec proposal 2 *Jan 20 16:48:27.775: ISAKMP: transform 1, ESP_AES *Jan 20 16:48:27.775: ISAKMP: attributes in transform: *Jan 20 16:48:27.775: ISAKMP: encaps is 1 (Tunnel) *Jan 20 16:48:27.775: ISAKMP: SA life type in seconds *Jan 20 16:48:27.775: ISAKMP: SA life duration (basic) of 28800 *Jan 20 16:48:27.775: ISAKMP: SA life type in kilobytes *Jan 20 16:48:27.775: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Jan 20 16:48:27.775: ISAKMP: authenticator is HMAC-MD5 *Jan 20 16:48:27.775: ISAKMP: key length is 256 *Jan 20 16:48:27.775: CryptoEngine0: validate proposal *Jan 20 16:48:27.775: ISAKMP:(1030):atts are acceptable. *Jan 20 16:48:27.775: IPSEC(validate_proposal_request): proposal part #1 *Jan 20 16:48:27.799: IPSEC(create_sa): sa created, (sa) sa_dest= 10.10.10.2, sa_proto= 50, sa_spi= 0x990A0C2C(2567572524), sa_trans= esp-des esp-md5-hmac , sa_conn_id= 39 *Jan 20 16:48:27.799: IPSEC(create_sa): sa created, (sa) sa_dest= 10.10.10.1, sa_proto= 50, sa_spi= 0x9FBC4C0D(2679917581), sa_trans= esp-des esp-md5-hmac , sa_conn_id= 40 !--- The two IPSec SAs shown above are for actual data traffic.
Revisie | Publicatiedatum | Opmerkingen |
---|---|---|
1.0 |
26-Sep-2008 |
Eerste vrijgave |