Inleiding
In dit document worden de problemen beschreven die zich voordoen wanneer Network Convergence System 5500 (NCS 5500) seriƫle ATA (SERS) veldprogrammeerbaar apparaat (FPD) niet wordt verbeterd met een automatische upgrade van de PDF. Wanneer u uw computer verbetert om 6.3.3/6.5.1/7.0.1 of hoger uit een voorafgaande release en de automatische upgrade optie gebruikt, worden sommige schijven voor sommige kaarten mogelijk niet bijgewerkt.
Het begint met de bovenvermelde releases. De mogelijkheid voor een upgrade van de SLB werd toegevoegd, samen met een nieuwe firmware-versie voor sommige typen (Micron). In het geval van deze releases is de nieuwe versie 5.00, terwijl 3.00 de oude versie van de FPD was.
NCS 5500 SERIES FPD upgrade zonder automatische FPD-upgrade
Dit zijn de stappen om het probleem te reproduceren en hoe de SoaSATA te verbeteren. Merk op dat u de kaart niet hoeft te herladen nadat u de FPD hebt bijgewerkt.
sysadmin-vm:0_RP0(config)# fpd auto-upgrade enable
sysadmin-vm:0_RP0(config)# commit
Wed Sep 12 15:57:26.892 UTC
Commit complete.
sysadmin-vm:0_RP0(config)# exit
Wed Sep 12 15:57:28.187 UTC
sysadmin-vm:0_RP0# exit
Wed Sep 12 15:57:30.101 UTC
RP/0/RP0/CPU0:router#conf t
Wed Sep 12 10:57:32.154 CDT
RP/0/RP0/CPU0:router(config)#fpd auto-upgrade enable
RP/0/RP0/CPU0:router(config)#commit
<na installatie en opnieuw laden>
RP/0/RP0/CPU0:router#show hw-module fpd
Wed Sep 12 11:51:32.195 CDT
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
------------------------------------------------------------------------------
0/0 NC55-36X100G-S 1.2 MIFPGA CURRENT 0.07 0.07
0/0 NC55-36X100G-S 1.2 Bootloader CURRENT 1.13 1.13
0/0 NC55-36X100G-S 1.2 IOFPGA CURRENT 0.11 0.11
0/0 NC55-36X100G-S 1.2 SATA NEED UPGD 3.00 3.00
0/RP0 NC55-RP 1.1 Bootloader CURRENT 9.25 9.25
0/RP0 NC55-RP 1.1 IOFPGA CURRENT 0.09 0.09
0/RP1 NC55-RP 1.1 Bootloader CURRENT 9.25 9.25
0/RP1 NC55-RP 1.1 IOFPGA CURRENT 0.09 0.09
0/FC0 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC0 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC1 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC1 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC2 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC2 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC3 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC3 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC5 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC5 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/SC0 NC55-SC 2.0 Bootloader CURRENT 1.74 1.74
0/SC0 NC55-SC 2.0 IOFPGA CURRENT 0.10 0.10
0/SC1 NC55-SC 2.0 Bootloader CURRENT 1.74 1.74
0/SC1 NC55-SC 2.0 IOFPGA CURRENT 0.10 0.10
RP/0/RP0/CPU0:router# admin
Wed Sep 12 11:51:54.259 CDT
admin connected from 127.0.0.1 using console on router
sysadmin-vm:0_RP1# upgrade hw-module location 0/0 fpd ?
Possible completions:
Bootloader IOFPGA SATA all
sysadmin-vm:0_RP1# upgrade hw-module location 0/0 fpd all
Wed Sep 12 16:52:07.859 UTC
sysadmin-vm:0_RP1# 0/RP1/ADMIN0:Sep 12 11:52:10.861 CDT: fpdserv[4429]: %INFRA-FPD_Manager-1-UPGRADE_ALERT : Upgrade for the following FPDs has been committed:
0/RP1/ADMIN0:Sep 12 11:52:10.861 CDT: fpdserv[4429]: %INFRA-FPD_Manager-1-UPGRADE_ALERT : Location FPD name Force
0/RP1/ADMIN0:Sep 12 11:52:10.861 CDT: fpdserv[4429]: %INFRA-FPD_Manager-1-UPGRADE_ALERT : ==================================================
0/RP1/ADMIN0:Sep 12 11:52:10.864 CDT: fpdserv[4429]: %INFRA-FPD_Manager-1-UPGRADE_ALERT : 0/0 SATA FALSE
0/RP1/ADMIN0:Sep 12 11:52:10.864 CDT: fpdserv[4429]: %INFRA-FPD_Manager-1-UPGRADE_ALERT : 0/0 IOFPGA FALSE
0/RP1/ADMIN0:Sep 12 11:52:10.864 CDT: fpdserv[4429]: %INFRA-FPD_Manager-1-UPGRADE_ALERT : 0/0 Bootloader FALSE
0/0/ADMIN0:Sep 12 11:52:16.876 CDT: sata_fpd[3179]: %INFRA-FPD_Driver-1-UPGRADE_ALERT : FPD SATA@0/0 image programming completed with UPGRADE DONE state Info: [SATA FPD upgrade Complete]
RP/0/RP0/CPU0:Sep 12 11:52:16.871 CDT: fpd-serv[427]: %PKT_INFRA-FM-3-FAULT_MAJOR : ALARM_MAJOR :FPD-NEED-UPGRADE :CLEAR :0/0:
sysadmin-vm:0_RP1#
sysadmin-vm:0_RP1#
sysadmin-vm:0_RP1#
sysadmin-vm:0_RP1# exit
Wed Sep 12 16:52:27.767 UTC
RP/0/RP0/CPU0:router#show hw-module fpd
Wed Sep 12 11:52:33.810 CDT
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
------------------------------------------------------------------------------
0/0 NC55-36X100G-S 1.2 MIFPGA CURRENT 0.07 0.07
0/0 NC55-36X100G-S 1.2 Bootloader CURRENT 1.13 1.13
0/0 NC55-36X100G-S 1.2 IOFPGA CURRENT 0.11 0.11
0/0 NC55-36X100G-S 1.2 SATA CURRENT 5.00 5.00
0/RP0 NC55-RP 1.1 Bootloader CURRENT 9.25 9.25
0/RP0 NC55-RP 1.1 IOFPGA CURRENT 0.09 0.09
0/RP1 NC55-RP 1.1 Bootloader CURRENT 9.25 9.25
0/RP1 NC55-RP 1.1 IOFPGA CURRENT 0.09 0.09
0/FC0 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC0 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC1 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC1 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC2 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC2 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC3 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC3 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/FC5 NC55-5504-FC 1.0 Bootloader CURRENT 1.75 1.75
0/FC5 NC55-5504-FC 1.0 IOFPGA CURRENT 0.07 0.07
0/SC0 NC55-SC 2.0 Bootloader CURRENT 1.74 1.74
0/SC0 NC55-SC 2.0 IOFPGA CURRENT 0.10 0.10
0/SC1 NC55-SC 2.0 Bootloader CURRENT 1.74 1.74
0/SC1 NC55-SC 2.0 IOFPGA CURRENT 0.10 0.10