DMVPN(Dynamic Multipoint VPN) 기능을 사용하면 일반 GRE(Routing Encapsulation) 터널, IPSec 암호화 및 NHRP(Next Hop Resolution Protocol)를 결합하여 사용자가 암호화 프로필을 통해 손쉽게 구성할 수 있으므로 고정 암호화 맵을 정의하고, 터널 엔드포인트를 동적으로 검색할 수 있습니다.
이 문서에 대한 특정 요건이 없습니다.
이 문서의 정보는 아래 소프트웨어 및 하드웨어 버전을 기반으로 합니다.
Cisco 2691 및 3725 라우터
Cisco IOS® 소프트웨어 릴리스 12.3(3)
참고: 다중 IPSec 패스스루는 Cisco IOS Software 릴리스 12.2.(2)XK 및 12.2.(13)T 이상에서만 지원됩니다.
라우터에서 show version 명령의 출력은 다음과 같습니다.
sv9-4#show version Cisco Internetwork Operating System Software IOS (tm) 2600 Software (C2691-IK9S-M), Version 12.3(3), RELEASE SOFTWARE (fc2) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 19-Aug-03 05:52 by dchih Image text-base: 0x60008954, data-base: 0x61D08000 ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1) sv9-4 uptime is 1 hour, 39 minutes System returned to ROM by reload System image file is "flash:c2691-ik9s-mz.123-3.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco 2691 (R7000) processor (revision 0.1) with 98304K/32768K bytes of memory. Processor board ID JMX0710L5CE R7000 CPU at 160Mhz, Implementation 39, Rev 3.3, 256KB L2 Cache Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). 2 FastEthernet/IEEE 802.3 interface(s) 2 Serial(sync/async) network interface(s) 1 ATM network interface(s) 1 Virtual Private Network (VPN) Module(s) DRAM configuration is 64 bits wide with parity disabled. 55K bytes of non-volatile configuration memory. 125184K bytes of ATA System CompactFlash (Read/Write) Configuration register is 0x2102
이 문서의 정보는 특정 랩 환경의 디바이스를 토대로 작성되었습니다. 이 문서에 사용된 모든 디바이스는 초기화된(기본) 컨피그레이션으로 시작되었습니다. 라이브 네트워크에서 작업하는 경우, 사용하기 전에 모든 명령의 잠재적인 영향을 이해해야 합니다.
이 기능은 다음 규칙에 따라 작동합니다.
각 스포크에는 네트워크 내의 다른 스포크가 아닌 허브에 대한 영구 IPSec 터널이 있습니다. 각 스포크는 NHRP 서버의 클라이언트로 등록됩니다.
스포크는 다른 스포크의 대상(개인) 서브넷에 패킷을 보내야 하는 경우 NHRP 서버에 대상(대상) 스포크의 실제(외부) 주소를 쿼리합니다.
원래 스포크가 대상 스포크의 피어 주소를 알게 되면 대상 스포크에 대한 동적 IPSec 터널을 시작할 수 있습니다.
스포크 투 스포크 터널은 mGRE(multipoint GRE) 인터페이스를 통해 구축됩니다.
스포크 간 링크는 스포크 간에 트래픽이 있을 때마다 요청에 따라 설정됩니다. 그런 다음 패킷이 허브를 우회하고 스포크 투 스포크 터널을 사용할 수 있습니다.
다음 정의는 규칙 집합에 적용됩니다.
NHRP - 허브가 서버이고 스포크가 클라이언트인 클라이언트 및 서버 프로토콜입니다. 허브는 각 스포크의 공용 인터페이스 주소의 NHRP 데이터베이스를 유지 관리합니다. 각 스포크는 직접 터널을 구축하기 위해 NHRP 데이터베이스를 부팅하고 쿼리할 때 실제 주소를 등록합니다.
mGRE Tunnel Interface(mGRE 터널 인터페이스) - 단일 GRE 인터페이스에서 여러 IPSec 터널을 지원하고 구성의 크기와 복잡성을 간소화할 수 있습니다.
참고: 스포크 투 스포크 터널에서 사전 구성된 양의 비활성 상태가 발생하면 라우터는 리소스를 저장하기 위해 터널을 분리합니다(IPSec 보안 연결[SA]).
참고: 트래픽 프로필은 80-20% 규칙을 따라야 합니다. 트래픽의 80%는 spoke-to-hub 트래픽으로 구성되며, 트래픽의 20%는 spoke-to-spoke 트래픽으로 구성됩니다.
문서 규칙에 대한 자세한 내용은 Cisco 기술 팁 표기 규칙을 참고하십시오.
이 섹션에는 이 문서에서 설명하는 기능을 구성하기 위한 정보가 표시됩니다.
참고: 이 문서에 사용된 명령에 대한 추가 정보를 찾으려면 명령 조회 도구(등록된 고객만 해당)를 사용합니다.
이 문서에서는 아래 다이어그램에 표시된 네트워크 설정을 사용합니다.
이 문서에서는 아래 표시된 구성을 사용합니다.
허브 라우터(sv9-2) 컨피그레이션 |
---|
sv9-2#show run Building configuration... Current configuration : 1827 bytes ! version 12.3 service config service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-2 ! boot-start-marker boot-end-marker ! enable password cisco ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip ssh break-string ! !--- Create an Internet Security Association and Key Management !--- Protocol (ISAKMP) policy for Phase 1 negotiations. ! crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all the remote VPN !--- routers. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac ! !--- Create an IPSec profile to be applied dynamically to the !--- GRE over IPSec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! !--- Create a GRE tunnel template which will be applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.1 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp network-id 1 no ip split-horizon eigrp 90 no ip next-hop-self eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! !--- This is the outbound interface. interface FastEthernet0/0 ip address 209.168.202.225 255.255.255.0 duplex auto speed auto ! !--- This is the inbound interface. interface FastEthernet0/1 ip address 1.1.1.1 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 1.1.1.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.226 ! ! ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 password cisco login transport preferred all transport input all transport output all ! ! end |
스포크 #1(sv9-3) 구성 |
---|
sv9-3#show run Building configuration... Current configuration : 1993 bytes ! version 12.3 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname sv9-3 ! boot-start-marker boot system flash:c3725-ik9s-mz.123-3.bin boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip ssh break-string ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all the remote VPN !--- routers and the hub router. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac ! !--- Create an IPSec profile to be applied dynamically to !--- the GRE over IPSec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! fax interface-type fax-mail ! ! ! ! ! !--- Create a GRE tunnel template to be applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.2 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp nhs 192.168.1.1 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! !--- This is the outbound interface. interface FastEthernet0/0 ip address 209.168.202.131 255.255.255.0 duplex auto speed auto ! !--- This is the inbound interface. interface FastEthernet0/1 ip address 2.2.2.2 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 2.2.2.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.225 ip route 3.3.3.0 255.255.255.0 Tunnel0 ! ! ! ! ! ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 login transport preferred all transport input all transport output all ! ! end |
스포크 #2(sv9-4) 구성 |
---|
sv9-4#show run Building configuration... Current configuration : 1994 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-4 ! boot-start-marker boot system flash:c2691-ik9s-mz.123-3.bin boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip ssh break-string ! ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all the remote VPN !--- routers and the hub router. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac ! !--- Create an IPSec profile to be applied dynamically to !--- the GRE over IPSec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! !--- Create a GRE tunnel template to be applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.3 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp nhs 192.168.1.1 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! !--- This is the outbound interface. interface FastEthernet0/0 ip address 209.168.202.130 255.255.255.0 duplex auto speed auto ! interface Serial0/0 no ip address shutdown clockrate 2000000 no fair-queue ! !--- This is the inbound interface. interface FastEthernet0/1 ip address 3.3.3.3 255.255.255.0 duplex auto speed auto ! interface Serial0/1 no ip address shutdown clockrate 2000000 ! interface ATM1/0 no ip address shutdown no atm ilmi-keepalive ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 3.3.3.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 2.2.2.0 255.255.255.0 Tunnel0 ip route 0.0.0.0 0.0.0.0 209.168.202.225 ! ! ! ! ! ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 password cisco login transport preferred all transport input all transport output all ! ! end |
이 섹션에서는 컨피그레이션이 제대로 작동하는지 확인하는 데 사용할 수 있는 정보를 제공합니다.
일부 show 명령은 출력 인터프리터 툴 에서 지원되는데(등록된 고객만), 이 툴을 사용하면 show 명령 출력의 분석 결과를 볼 수 있습니다.
show crypto engine connection active(암호화 엔진 연결 활성 표시) - SA당 총 암호화 및 해독 정보를 표시합니다.
show crypto ipsec sa - 활성 터널의 통계를 표시합니다.
show crypto isakmp sa - ISAKMP SA의 상태를 표시합니다.
이 섹션에서는 컨피그레이션 문제를 해결하는 데 사용할 수 있는 정보를 제공합니다.
문제
DMVPN 터널이 간헐적으로 깜박입니다.
솔루션
DMVPN이 플랩을 터널링하는 경우 라우터 간 인접 디바이스 간 연결 문제로 인해 DMVPN 터널이 플랩될 수 있는지 확인합니다. 이 문제를 해결하려면 라우터 간 인접 디바이스가 항상 작동되는지 확인하십시오.
참고: debug 명령을 실행하기 전에 디버그 명령에 대한 중요 정보를 참조하십시오.
debug crypto ipsec - IPSec 이벤트를 표시합니다.
debug crypto isakmp - IKE(Internet Key Exchange) 이벤트에 대한 메시지를 표시합니다.
debug crypto engine - 암호화 엔진의 정보를 표시합니다.
IPSec 문제 해결에 대한 자세한 내용은 IP Security Troubleshooting - Understanding and Using debug 명령을 참조하십시오.
다음 디버그 출력은 NHRP 요청 및 NHRP 확인 응답을 보여줍니다. 디버그가 스포크에서 캡처되었습니다. sv9-4 및 sv9-3 및 hub sv9-2.
sv9-4#show debug NHRP: NHRP protocol debugging is on sv9-4#ping 2.2.2.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms sv9-4# *Mar 1 02:06:01.667: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.671: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.675: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.679: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.225 *Mar 1 02:06:01.679: NHRP: Send Resolution Request via Tunnel0, packet size: 84 *Mar 1 02:06:01.679: src: 192.168.1.3, dst: 192.168.1.1 *Mar 1 02:06:01.679: NHRP: 84 bytes out Tunnel0 *Mar 1 02:06:01.679: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.683: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:03.507: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.225 *Mar 1 02:06:03.507: NHRP: Send Resolution Request via Tunnel0, packet size: 84 *Mar 1 02:06:03.507: src: 192.168.1.3, dst: 192.168.1.1 *Mar 1 02:06:03.507: NHRP: 84 bytes out Tunnel0 *Mar 1 02:06:03.511: NHRP: Receive Resolution Reply via Tunnel0, packet size: 132 *Mar 1 02:06:03.511: NHRP: netid_in = 0, to_us = 1 *Mar 1 02:06:03.511: NHRP: No need to delay processing of resolution event nbma src:209.168.202.130 nbma dst:209.168.202.131 sv9-3# 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.225 05:31:12: NHRP: Send Resolution Request via Tunnel0, packet size: 84 05:31:12: src: 192.168.1.2, dst: 192.168.1.1 05:31:12: NHRP: 84 bytes out Tunnel0 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Receive Resolution Request via Tunnel0, packet size: 104 05:31:12: NHRP: netid_in = 1, to_us = 0 05:31:12: NHRP: Delaying resolution request nbma src:209.168.202.131 nbma dst:209.168.202.130 reason:IPSEC-IFC: need to wait for IPsec SAs. 05:31:12: NHRP: Receive Resolution Reply via Tunnel0, packet size: 112 05:31:12: NHRP: netid_in = 0, to_us = 1 05:31:12: NHRP: Resolution request is already being processed (delayed). 05:31:12: NHRP: Resolution Request not queued. Already being processed (delayed). 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:13: NHRP: Process delayed resolution request src:192.168.1.3 dst:2.2.2.2 05:31:13: NHRP: No need to delay processing of resolution event nbma src:209.168.202.131 nbma dst:209.168.202.130 sv9-2# *Mar 1 06:03:40.174: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.174: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.178: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.182: NHRP: Receive Resolution Request via Tunnel0, packet size: 84 *Mar 1 06:03:40.182: NHRP: netid_in = 1, to_us = 0 *Mar 1 06:03:40.182: NHRP: No need to delay processing of resolution event nbma src:209.168.202.225 nbma dst:209.168.202.130 *Mar 1 06:03:40.182: NHRP: nhrp_rtlookup yielded Tunnel0 *Mar 1 06:03:40.182: NHRP: netid_out 1, netid_in 1 *Mar 1 06:03:40.182: NHRP: nhrp_cache_lookup_comp returned 0x0 *Mar 1 06:03:40.182: NHRP: calling nhrp_forward *Mar 1 06:03:40.182: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.131 *Mar 1 06:03:40.182: NHRP: Forwarding Resolution Request via Tunnel0, packet size: 104 *Mar 1 06:03:40.182: src: 192.168.1.1, dst: 2.2.2.2 *Mar 1 06:03:40.182: NHRP: 104 bytes out Tunnel0 *Mar 1 06:03:40.182: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.182: NHRP: Receive Resolution Request via Tunnel0, packet size: 84 *Mar 1 06:03:40.182: NHRP: netid_in = 1, to_us = 0 *Mar 1 06:03:40.182: NHRP: No need to delay processing of resolution event nbma src:209.168.202.225 nbma dst:209.168.202.131 *Mar 1 06:03:40.182: NHRP: nhrp_rtlookup yielded Tunnel0 *Mar 1 06:03:40.182: NHRP: netid_out 1, netid_in 1 *Mar 1 06:03:40.182: NHRP: nhrp_cache_lookup_comp returned 0x63DE9498 *Mar 1 06:03:40.182: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.131 *Mar 1 06:03:40.182: NHRP: Send Resolution Reply via Tunnel0, packet size: 112 *Mar 1 06:03:40.186: src: 192.168.1.1, dst: 192.168.1.2 *Mar 1 06:03:40.186: NHRP: 112 bytes out Tunnel0 *Mar 1 06:03:40.186: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:42.010: NHRP: Receive Resolution Request via Tunnel0, packet size: 84 *Mar 1 06:03:42.010: NHRP: netid_in = 1, to_us = 0 *Mar 1 06:03:42.010: NHRP: No need to delay processing of resolution event nbma src:209.168.202.225 nbma dst:209.168.202.130
다음 디버그 출력은 ISAKMP 및 IPSec 협상을 보여줍니다. 디버그가 스포크에서 캡처되었습니다. sv9-4 및 sv9-3.
sv9-4#ping 2.2.2.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms sv9-4# *Mar 1 02:25:37.107: ISAKMP (0:0): received packet from 209.168.202.131 dport 500 sport 500 Global (N) NEW SA *Mar 1 02:25:37.107: ISAKMP: local port 500, remote port 500 *Mar 1 02:25:37.107: ISAKMP: insert sa successfully sa = 63B38288 *Mar 1 02:25:37.107: ISAKMP (0:12): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH *Mar 1 02:25:37.107: ISAKMP (0:12): Old State = IKE_READY New State = IKE_R_MM1 *Mar 1 02:25:37.107: ISAKMP (0:12): processing SA payload. message ID = 0 *Mar 1 02:25:37.107: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID seems Unity/DPD but major 157 mismatch *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID is NAT-T v3 *Mar 1 02:25:37.107: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID seems Unity/DPD but major 123 mismatch *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID is NAT-T v2 *Mar 1 02:25:37.107: ISAKMP: Looking for a matching key for 209.168.202.131 in default : success *Mar 1 02:25:37.107: ISAKMP (0:12): found peer pre-shared key matching 209.168.202.131 *Mar 1 02:25:37.107: ISAKMP (0:12) local preshared key found *Mar 1 02:25:37.107: ISAKMP : Scanning profiles for xauth ... *Mar 1 02:25:37.107: ISAKMP (0:12): Checking ISAKMP transform 1 against priority 10 policy *Mar 1 02:25:37.107: ISAKMP: encryption DES-CBC *Mar 1 02:25:37.107: ISAKMP: hash MD5 *Mar 1 02:25:37.107: ISAKMP: default group 1 *Mar 1 02:25:37.107: ISAKMP: auth pre-share *Mar 1 02:25:37.107: ISAKMP: life type in seconds *Mar 1 02:25:37.107: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Mar 1 02:25:37.107: ISAKMP (0:12): atts are acceptable. Next payload is 0 *Mar 1 02:25:37.115: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID seems Unity/DPD but major 157 mismatch *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID is NAT-T v3 *Mar 1 02:25:37.115: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID seems Unity/DPD but major 123 mismatch *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID is NAT-T v2 *Mar 1 02:25:37.115: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE *Mar 1 02:25:37.115: ISAKMP (0:12): Old State = IKE_R_MM1 New State = IKE_R_MM1 *Mar 1 02:25:37.115: ISAKMP (0:12): constructed NAT-T vendor-03 ID *Mar 1 02:25:37.115: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) MM_SA_SETUP *Mar 1 02:25:37.115: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE *Mar 1 02:25:37.115: ISAKMP (0:12): Old State = IKE_R_MM1 New State = IKE_R_MM2 *Mar 1 02:25:37.123: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) MM_SA_SETUP *Mar 1 02:25:37.123: ISAKMP (0:12): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH *Mar 1 02:25:37.123: ISAKMP (0:12): Old State = IKE_R_MM2 New State = IKE_R_MM3 *Mar 1 02:25:37.123: ISAKMP (0:12): processing KE payload. message ID = 0 *Mar 1 02:25:37.131: ISAKMP (0:12): processing NONCE payload. message ID = 0 *Mar 1 02:25:37.131: ISAKMP: Looking for a matching key for 209.168.202.131 in default : success *Mar 1 02:25:37.131: ISAKMP (0:12): found peer pre-shared key matching 209.168.202.131 *Mar 1 02:25:37.131: ISAKMP: Looking for a matching key for 209.168.202.131 in default : success *Mar 1 02:25:37.131: ISAKMP (0:12): found peer pre-shared key matching 209.168.202.131 *Mar 1 02:25:37.135: ISAKMP (0:12): SKEYID state generated *Mar 1 02:25:37.135: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.135: ISAKMP (0:12): vendor ID is Unity *Mar 1 02:25:37.135: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.135: ISAKMP (0:12): vendor ID is DPD *Mar 1 02:25:37.135: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.135: ISAKMP (0:12): speaking to another IOS box! *Mar 1 02:25:37.135: ISAKMP:received payload type 17 *Mar 1 02:25:37.135: ISAKMP:received payload type 17 *Mar 1 02:25:37.135: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE *Mar 1 02:25:37.135: ISAKMP (0:12): Old State = IKE_R_MM3 New State = IKE_R_MM3 *Mar 1 02:25:37.135: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) MM_KEY_EXCH *Mar 1 02:25:37.135: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE *Mar 1 02:25:37.135: ISAKMP (0:12): Old State = IKE_R_MM3 New State = IKE_R_MM4 *Mar 1 02:25:37.147: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) MM_KEY_EXCH *Mar 1 02:25:37.151: ISAKMP (0:12): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH *Mar 1 02:25:37.151: ISAKMP (0:12): Old State = IKE_R_MM4 New State = IKE_R_MM5 *Mar 1 02:25:37.151: ISAKMP (0:12): processing ID payload. message ID = 0 *Mar 1 02:25:37.151: ISAKMP (0:12): peer matches *none* of the profiles *Mar 1 02:25:37.151: ISAKMP (0:12): processing HASH payload. message ID = 0 *Mar 1 02:25:37.151: ISAKMP (0:12): processing NOTIFY INITIAL_CONTACT protocol 1 spi 0, message ID = 0, sa = 63B38288 *Mar 1 02:25:37.151: ISAKMP (0:12): Process initial contact, bring down existing phase 1 and 2 SA's with local 209.168.202.130 remote 209.168.202.131 remote port 500 *Mar 1 02:25:37.151: ISAKMP (0:12): SA has been authenticated with 209.168.202.131 *Mar 1 02:25:37.151: ISAKMP (0:12): peer matches *none* of the profiles *Mar 1 02:25:37.151: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE *Mar 1 02:25:37.151: ISAKMP (0:12): Old State = IKE_R_MM5 New State = IKE_R_MM5 *Mar 1 02:25:37.151: IPSEC(key_engine): got a queue event... *Mar 1 02:25:37.151: ISAKMP (0:12): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR *Mar 1 02:25:37.151: ISAKMP (12): ID payload next-payload : 8 type : 1 addr : 209.168.202.130 protocol : 17 port : 500 length : 8 *Mar 1 02:25:37.151: ISAKMP (12): Total payload length: 12 *Mar 1 02:25:37.155: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) MM_KEY_EXCH *Mar 1 02:25:37.155: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE *Mar 1 02:25:37.155: ISAKMP (0:12): Old State = IKE_R_MM5 New State = IKE_P1_COMPLETE *Mar 1 02:25:37.155: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE *Mar 1 02:25:37.155: ISAKMP (0:12): Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Mar 1 02:25:37.159: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) QM_IDLE *Mar 1 02:25:37.159: ISAKMP: set new node -1682446278 to QM_IDLE *Mar 1 02:25:37.159: ISAKMP (0:12): processing HASH payload. message ID = -1682446278 *Mar 1 02:25:37.159: ISAKMP (0:12): processing SA payload. message ID = -1682446278 *Mar 1 02:25:37.159: ISAKMP (0:12): Checking IPSec proposal 1 *Mar 1 02:25:37.159: ISAKMP: transform 1, ESP_3DES *Mar 1 02:25:37.159: ISAKMP: attributes in transform: *Mar 1 02:25:37.159: ISAKMP: encaps is 1 *Mar 1 02:25:37.159: ISAKMP: SA life type in seconds *Mar 1 02:25:37.159: ISAKMP: SA life duration (basic) of 120 *Mar 1 02:25:37.159: ISAKMP: SA life type in kilobytes *Mar 1 02:25:37.159: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Mar 1 02:25:37.159: ISAKMP: authenticator is HMAC-MD5 *Mar 1 02:25:37.159: ISAKMP (0:12): atts are acceptable. *Mar 1 02:25:37.163: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 209.168.202.130, remote= 209.168.202.131, local_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1), remote_proxy= 209.168.202.131/255.255.255.255/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2 *Mar 1 02:25:37.163: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.163: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.163: ISAKMP (0:12): processing NONCE payload. message ID = -1682446278 *Mar 1 02:25:37.163: ISAKMP (0:12): processing ID payload. message ID = -1682446278 *Mar 1 02:25:37.163: ISAKMP (0:12): processing ID payload. message ID = -1682446278 *Mar 1 02:25:37.163: ISAKMP (0:12): asking for 1 spis from ipsec *Mar 1 02:25:37.163: ISAKMP (0:12): Node -1682446278, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Mar 1 02:25:37.163: ISAKMP (0:12): Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE *Mar 1 02:25:37.163: IPSEC(key_engine): got a queue event... *Mar 1 02:25:37.163: IPSEC(spi_response): getting spi 3935077313 for SA from 209.168.202.130 to 209.168.202.131 for prot 3 *Mar 1 02:25:37.163: ISAKMP: received ke message (2/1) *Mar 1 02:25:37.415: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) QM_IDLE *Mar 1 02:25:37.415: ISAKMP (0:12): Node -1682446278, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY *Mar 1 02:25:37.415: ISAKMP (0:12): Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 *Mar 1 02:25:37.427: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) QM_IDLE *Mar 1 02:25:37.439: ISAKMP (0:12): Creating IPSec SAs *Mar 1 02:25:37.439: inbound SA from 209.168.202.131 to 209.168.202.130 (f/i) 0/ 0 (proxy 209.168.202.131 to 209.168.202.130) *Mar 1 02:25:37.439: has spi 0xEA8C83C1 and conn_id 5361 and flags 2 *Mar 1 02:25:37.439: lifetime of 120 seconds *Mar 1 02:25:37.439: lifetime of 4608000 kilobytes *Mar 1 02:25:37.439: has client flags 0x0 *Mar 1 02:25:37.439: outbound SA from 209.168.202.130 to 209.168.202.131 (f/i) 0/ 0 (proxy 209.168.202.130 to 209.168.202.131) *Mar 1 02:25:37.439: has spi 1849847934 and conn_id 5362 and flags A *Mar 1 02:25:37.439: lifetime of 120 seconds *Mar 1 02:25:37.439: lifetime of 4608000 kilobytes *Mar 1 02:25:37.439: has client flags 0x0 *Mar 1 02:25:37.439: ISAKMP (0:12): deleting node -1682446278 error FALSE reason "quick mode done (await)" *Mar 1 02:25:37.439: ISAKMP (0:12): Node -1682446278, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Mar 1 02:25:37.439: ISAKMP (0:12): Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE *Mar 1 02:25:37.439: IPSEC(key_engine): got a queue event... *Mar 1 02:25:37.439: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 209.168.202.130, remote= 209.168.202.131, local_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0xEA8C83C1(3935077313), conn_id= 5361, keysize= 0, flags= 0x2 *Mar 1 02:25:37.439: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 209.168.202.130, remote= 209.168.202.131, local_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0x6E42707E(1849847934), conn_id= 5362, keysize= 0, flags= 0xA *Mar 1 02:25:37.439: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.439: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.439: IPSEC(add mtree): src 209.168.202.130, dest 209.168.202.131, dest_port 0 *Mar 1 02:25:37.439: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.130, sa_prot= 50, sa_spi= 0xEA8C83C1(3935077313), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5361 *Mar 1 02:25:37.439: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.131, sa_prot= 50, sa_spi= 0x6E42707E(1849847934), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5362 sv9-4# *Mar 1 02:25:55.183: ISAKMP (0:10): purging node 180238748 *Mar 1 02:25:55.323: ISAKMP (0:10): purging node -1355110639 sv9-4# sv9-3# 05:50:48: ISAKMP: received ke message (1/1) 05:50:48: ISAKMP (0:0): SA request profile is (NULL) 05:50:48: ISAKMP: local port 500, remote port 500 05:50:48: ISAKMP: set new node 0 to QM_IDLE 05:50:48: ISAKMP: insert sa successfully sa = 62DB93D0 05:50:48: ISAKMP (0:26): Can not start Aggressive mode, trying Main mode. 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP (0:26): constructed NAT-T vendor-03 ID 05:50:48: ISAKMP (0:26): constructed NAT-T vendor-02 ID 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM 05:50:48: ISAKMP (0:26): Old State = IKE_READY New State = IKE_I_MM1 05:50:48: ISAKMP (0:26): beginning Main Mode exchange 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) MM_NO_STATE 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) MM_NO_STATE 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM1 New State = IKE_I_MM2 05:50:48: ISAKMP (0:26): processing SA payload. message ID = 0 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID seems Unity/DPD but major 157 mismatch 05:50:48: ISAKMP (0:26): vendor ID is NAT-T v3 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP (0:26) local preshared key found 05:50:48: ISAKMP : Scanning profiles for xauth ... 05:50:48: ISAKMP (0:26): Checking ISAKMP transform 1 against priority 10 policy 05:50:48: ISAKMP: encryption DES-CBC 05:50:48: ISAKMP: hash MD5 05:50:48: ISAKMP: default group 1 05:50:48: ISAKMP: auth pre-share 05:50:48: ISAKMP: life type in seconds 05:50:48: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 05:50:48: ISAKMP (0:26): atts are acceptable. Next payload is 0 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID seems Unity/DPD but major 157 mismatch 05:50:48: ISAKMP (0:26): vendor ID is NAT-T v3 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM2 New State = IKE_I_MM2 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) MM_SA_SETUP 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM2 New State = IKE_I_MM3 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) MM_SA_SETUP 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM3 New State = IKE_I_MM4 05:50:48: ISAKMP (0:26): processing KE payload. message ID = 0 05:50:48: ISAKMP (0:26): processing NONCE payload. message ID = 0 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP (0:26): SKEYID state generated 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID is Unity 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID is DPD 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): speaking to another IOS box! 05:50:48: ISAKMP:received payload type 17 05:50:48: ISAKMP:received payload type 17 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM4 New State = IKE_I_MM4 05:50:48: ISAKMP (0:26): Send initial contact 05:50:48: ISAKMP (0:26): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR 05:50:48: ISAKMP (26): ID payload next-payload : 8 type : 1 addr : 209.168.202.131 protocol : 17 port : 500 length : 8 05:50:48: ISAKMP (26): Total payload length: 12 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) MM_KEY_EXCH 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM4 New State = IKE_I_MM5 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) MM_KEY_EXCH 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM5 New State = IKE_I_MM6 05:50:48: ISAKMP (0:26): processing ID payload. message ID = 0 05:50:48: ISAKMP (0:26): processing HASH payload. message ID = 0 05:50:48: ISAKMP (0:26): SA has been authenticated with 209.168.202.130 05:50:48: ISAKMP (0:26): peer matches *none* of the profiles 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM6 New State = IKE_I_MM6 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM6 New State = IKE_P1_COMPLETE 05:50:48: ISAKMP (0:26): beginning Quick Mode exchange, M-ID of -1682446278 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) QM_IDLE 05:50:48: ISAKMP (0:26): Node -1682446278, Input = IKE_MESG_INTERNAL, IKE_INIT_QM 05:50:48: ISAKMP (0:26): Old State = IKE_QM_READY New State = IKE_QM_I_QM1 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) QM_IDLE 05:50:48: ISAKMP (0:26): processing HASH payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): processing SA payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): Checking IPSec proposal 1 05:50:48: ISAKMP: transform 1, ESP_3DES 05:50:48: ISAKMP: attributes in transform: 05:50:48: ISAKMP: encaps is 1 05:50:48: ISAKMP: SA life type in seconds 05:50:48: ISAKMP: SA life duration (basic) of 120 05:50:48: ISAKMP: SA life type in kilobytes 05:50:48: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 05:50:48: ISAKMP: authenticator is HMAC-MD5 05:50:48: ISAKMP (0:26): atts are acceptable. 05:50:48: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 209.168.202.131, remote= 209.168.202.130, local_proxy= 209.168.202.131/255.255.255.255/47/0 (type=1), remote_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: ISAKMP (0:26): processing NONCE payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): processing ID payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): processing ID payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): Creating IPSec SAs 05:50:48: inbound SA from 209.168.202.130 to 209.168.202.131 (f/i) 0/ 0 (proxy 209.168.202.130 to 209.168.202.131) 05:50:48: has spi 0x6E42707E and conn_id 5547 and flags 2 05:50:48: lifetime of 120 seconds 05:50:48: lifetime of 4608000 kilobytes 05:50:48: has client flags 0x0 05:50:48: outbound SA from 209.168.202.131 to 209.168.202.130 (f/i) 0/ 0 (proxy 209.168.202.131 to 209.168.202.130) 05:50:48: has spi -359889983 and conn_id 5548 and flags A 05:50:48: lifetime of 120 seconds 05:50:48: lifetime of 4608000 kilobytes 05:50:48: has client flags 0x0 05:50:48: IPSEC(key_engine): got a queue event... 05:50:48: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 209.168.202.131, remote= 209.168.202.130, local_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0x6E42707E(1849847934), conn_id= 5547, keysize= 0, flags= 0x2 05:50:48: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 209.168.202.131, remote= 209.168.202.130, local_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0xEA8C83C1(3935077313), conn_id= 5548, keysize= 0, flags= 0xA 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: IPSEC(add mtree): src 209.168.202.131, dest 209.168.202.130, dest_port 0 05:50:48: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.131, sa_prot= 50, sa_spi= 0x6E42707E(1849847934), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5547 05:50:48: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.130, sa_prot= 50, sa_spi= 0xEA8C83C1(3935077313), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5548 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) QM_IDLE 05:50:48: ISAKMP (0:26): deleting node -1682446278 error FALSE reason "" 05:50:48: ISAKMP (0:26): Node -1682446278, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_QM_I_QM1 New State = IKE_QM_PHASE2_COMPLETE 05:50:49: ISAKMP (0:21): purging node 334570133 sv9-3#
개정 | 게시 날짜 | 의견 |
---|---|---|
1.0 |
23-Sep-2009 |
최초 릴리스 |