この製品のドキュメントセットは、偏向のない言語を使用するように配慮されています。このドキュメントセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブ ランゲージの取り組みの詳細は、こちらをご覧ください。
シスコは世界中のユーザにそれぞれの言語でサポート コンテンツを提供するために、機械と人による翻訳を組み合わせて、本ドキュメントを翻訳しています。ただし、最高度の機械翻訳であっても、専門家による翻訳のような正確性は確保されません。シスコは、これら翻訳の正確性について法的責任を負いません。原典である英語版(リンクからアクセス可能)もあわせて参照することを推奨します。
このドキュメントでは、トラブルシューティングの方法と、Cisco Extension Mobilityのログ分析を実行する方法について説明します。
このドキュメントに特有の要件はありません。
このドキュメントの情報は、次のソフトウェアとハードウェアのバージョンに基づいています。
このドキュメントの情報は、特定のラボ環境にあるデバイスに基づいて作成されました。このドキュメントで使用するすべてのデバイスは、初期(デフォルト)設定の状態から起動しています。本稼働中のネットワークでは、各コマンドによって起こる可能性がある影響を十分確認してください。
ユーザがサイト間を移動し、電話を持っていない場合は、そのサイトで利用可能な電話を使用して移動することができます。発生するほとんどの一般的な問題には、図に示すように、誤った内線番号、発信権限などが含まれます。
ユーザが電話機にログインしようとすると、次の一連のイベントが発生します。
ユーザは、Servicesボタンを押し、Cisco EMサービスでLogoutを選択することで、Cisco EMからログアウトできます。ユーザが自分自身でログアウトしない場合、最大ログイン時間が経過すると(適切なサービスパラメータが適宜設定されている場合)、自動的にログアウトされます
設定手順の詳細については、次のリンクを参照してください。
現在、この設定に使用できる確認手順はありません。
ここでは、設定のトラブルシューティングに使用できる情報を示します。
次のデバッグレベルのログを収集します。
これらのログとともに、次のように詳細をメモします。
Details: User ID:EMuser Normal DN: 7777 Device profile DN: 8888 Phone Name: test_secure (CIPC) Time of login: 19:10 Phone IP: 192.168.0.105 PC IP on which CIPC running: 10.65.40.61 Publisher IP: 10.106.111.182
このセクションでは、言及されているトレースですべてのイベントを確認する必要がある内容について説明します。
### Login Constructor 2018-04-14 19:10:51,961 DEBUG [http-bio-8080-exec-23] authentication.AuthenticationImpl - successfully read propertyfile -
classname is com.cisco.security.ims.impl.CUCMUtil 2018-04-14 19:10:51,962 DEBUG [http-bio-8080-exec-23] authentication.AuthenticationImpl - login: Entering login 2018-04-14 19:10:51,962 DEBUG [http-bio-8080-exec-23] authentication.AuthenticationImpl - loginUtil: Authenticating against DB. 2018-04-14 19:10:51,962 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - Constructor: ### Authenticate user 2018-04-14 19:10:51,962 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - authenticateUser: userId=EM**** isLogin true 2018-04-14 19:10:51,962 DEBUG [http-bio-8080-exec-23] security.Log4jEncLogger - Entering HashTextSHA ### Authentication for the user is TRUE and CUCM checks that EMuser is a valid end user.
Authentication complete with result =0; 0 means successful and 1 means not successful 2018-04-14 19:10:51,992 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - authenticateUser: Authentication Match. 2018-04-14 19:10:51,992 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - authenticateUser:Resetting last login time and Hack count.. 2018-04-14 19:10:51,992 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - Calling combined API End user 2018-04-14 19:10:52,007 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - Authentication Sucessful .. Returning true 2018-04-14 19:10:52,007 DEBUG [http-bio-8080-exec-23] impl.AuthenticationDB - authenticateUser: userId=EMuser is a valid END user. 2018-04-14 19:10:52,009 DEBUG [http-bio-8080-exec-23] authentication.AuthenticationImpl - loginUtil: Authentication complete with result=0
### Request for device (here name of phone is test_secure; otherwise it will be the MAC address here) 2018-04-14 19:09:45,772 INFO [http-bio-8443-exec-23] DBRequestor - 5:Querying device user for device test_secure 2018-04-14 19:09:45,772 INFO [http-bio-8443-exec-23] DBRequestor - 5:Getting device object - three params 2018-04-14 19:09:45,772 INFO [http-bio-8443-exec-23] DBRequestor - 5: DBRequestor.queryDeviceUser: Dev: 'test_secure' - Getting device object 2018-04-14 19:09:45,793 DEBUG [http-bio-8443-exec-23] CMDatabase - CMDatabase:getDeviceInfo(): SELECT COUNT(pkid) as count from emccdynamic where my_lower(devicename) = my_lower(?) :: Parameter ('test_secure') 2018-04-14 19:09:45,795 DEBUG [http-bio-8443-exec-23] CMDatabase - CMDatabase:getDeviceInfo(): SELECT device.pkid, loginduration,decode(emremotedynamic.logintime, null, extensionmobilitydynamic.logintime, emremotedynamic.logintime) logintime, allowhotelingflag,
decode(remoteuserid, null, e2.userid, remoteuserid) currentuserid, decode(lastremoteuserid, null, e1.userid, lastremoteuserid) lastuserid, extensionmobilitydynamic.tkuserlocale, fkdevicepool, tkdeviceprotocol, tkproduct, tkmodel
FROM Device left outer join extensionmobilitydynamic on device.pkid=extensionmobilitydynamic.fkdevice left outer join emremotedynamic on (extensionmobilitydynamic.fkdevice=emremotedynamic.fkdevice) left outer join enduser e1 on (extensionmobilitydynamic.fkenduser_lastlogin=e1.pkid)
left outer join enduser e2 on (extensionmobilitydynamic.fkenduser=e2.pkid) where my_lower(device.name) = my_lower(?) :: Parameter ('test_secure') 2018-04-14 19:09:45,798 INFO [http-bio-8443-exec-23] CMDatabase - getDeviceInfo:Result of the query: {tkproduct=30041, loginduration=, lastuserid=,
tkdeviceprotocol=11, pkid=d72b2e5f-5dd2-51fc-ec50-c9daf98aab66, tkmodel=30016, logintime=, currentuserid=, allowhotelingflag=t, fkdevicepool=1b1b9eb6-7803-11d3-bdf0-00108302ead1, tkuserlocale=} 2018-04-14 19:09:45,798 INFO [http-bio-8443-exec-23] DBRequestor - 5: DBRequestor.queryDeviceUser: Dev: 'test_secure' - Device object returned 2018-04-14 19:09:45,798 INFO [http-bio-8443-exec-23] DBRequestor - 5: QueryDeviceUser: Device Logged out 2018-04-14 19:09:45,799 INFO [http-bio-8443-exec-23] DBRequestor - 5:Device query info contains userid= 2018-04-14 19:09:45,799 INFO [http-bio-8443-exec-23] DBRequestor - 5:Device query info contains last login userid= 2018-04-14 19:09:45,800 DEBUG [http-bio-8443-exec-23] EMServiceServlet - 5: executeQuery complete. 2018-04-14 19:09:45,800 DEBUG [http-bio-8443-exec-23] EMServiceServlet - 5:Query completed, returning<response> <deviceUserResults> <device name="test_secure"> <none/> <none/> <emccDevice>no</emccDevice> </device> </deviceUserResults> </response> <!DOCTYPE query SYSTEM "http://10.106.111.182:8080/emservice/jsp/LoginQuery.dtd"> <query><appInfo><appID>CCMSysUser</appID><appEncryptedCertificate>*****
</appInfo><checkUser><userID>EMuser</userID><remoteIPAddr>10.65.40.61</remoteIPAddr><isViaHeaderSet>false</isViaHeaderSet></checkUser></query> ### CUCM sends that EMuser is a local user 2018-04-14 19:10:51,940 DEBUG [http-bio-8443-exec-4] CMDatabase - Userid being passed to the query is EMuser 2018-04-14 19:10:51,941 DEBUG [http-bio-8443-exec-4] CMDatabase - CMDatabase.isLocalUser() : SELECT islocaluser FROM EndUser WHERE my_lower(userid)= my_lower(?) : parameter ( 'EMuser' ) 2018-04-14 19:10:51,947 DEBUG [http-bio-8443-exec-4] CMDatabase - PKID for the ROW is 2018-04-14 19:10:51,948 DEBUG [http-bio-8443-exec-4] CMDatabase - CMDatabase.isLocalUser() : isLocaluser : true 2018-04-14 19:10:51,949 DEBUG [http-bio-8443-exec-4] EMServiceServlet - 6:Query completed, returning<response> <checkUserResults> <user id="EMuser"> <exists>EMuser</exists> </user> </checkUserResults> </response> ### Login request 2018-04-14 19:10:52,061 INFO [http-bio-8443-exec-21] EMServiceServlet - 7:EM Service: Request type=Login/Logout 2018-04-14 19:10:52,062 INFO [http-bio-8443-exec-21] EMServiceServlet - 7: LoginService.processRequest: Received Request 2018-04-14 19:10:52,062 INFO [http-bio-8443-exec-21] EMServiceServlet - 7:Parsing Request... 2018-04-14 19:10:52,063 INFO [http-bio-8443-exec-21] EMServiceServlet - 7:Request-><?xml version="1.0"?> ### Login process 2018-04-14 19:10:52,095 DEBUG [http-bio-8443-exec-21] EMServiceServlet - 7: processXMLRequest: EMuser: EM2 2018-04-14 19:10:52,095 INFO [http-bio-8443-exec-21] EMServiceServlet - 7:Finished Parsing XML request 2018-04-14 19:10:52,095 INFO [http-bio-8443-exec-21] EMServiceServlet - 7:Executing Login... 2018-04-14 19:10:52,133 INFO [http-bio-8443-exec-21] EMServiceServlet - 7: LoginService.executeLogin: Dev: test_secure- Sending request to DB 2018-04-14 19:10:52,133 DEBUG [http-bio-8443-exec-21] DBRequestor - 7: LoginInfo.profile is NULL 2018-04-14 19:10:52,133 INFO [http-bio-8443-exec-21] DBRequestor - 7: 'DBRequestor.login': Dev: 'test_secure' - Getting device profile object 2018-04-14 19:10:52,134 INFO [http-bio-8443-exec-21] CMDatabase - CMDatabase:getProfileInfo: ###: SELECT pkid from Device
WHERE my_lower(name) = my_lower(?) : parameter ( 'EM2' ) 2018-04-14 19:10:52,135 DEBUG [http-bio-8443-exec-21] CMDatabase - CMDatabase:getProfileInfo:
PKID for device : 0bff3cfd-13c1-5352-1a39-9188bdd855d8 2018-04-14 19:10:52,136 INFO [http-bio-8443-exec-21] DBRequestor - 7: DBRequestor.login: Dev: test_secure- Device profile object returned 2018-04-14 19:10:52,136 INFO [http-bio-8443-exec-21] DBRequestor - 7: DBRequestor.login: Dev: test_secure-
Calling deviceLogin(d72b2e5f-5dd2-51fc-ec50-c9daf98aab66, 0bff3cfd-13c1-5352-1a39-9188bdd855d8, EMuser, 0, false, 0) 2018-04-14 19:10:52,136 INFO [http-bio-8443-exec-21] CMDatabase - CMDatabase:deviceLogin() ### Login successful 2018-04-14 19:10:52,137 DEBUG [http-bio-8443-exec-21] CMDatabase - Userid being passed to the query is EMuser 2018-04-14 19:10:52,139 INFO [http-bio-8443-exec-21] CMDatabase - CMDatabase:deviceLogin:
execute function DeviceLogin ('d72b2e5f-5dd2-51fc-ec50-c9daf98aab66','0bff3cfd-13c1-5352-1a39-9188bdd855d8','181a09dd-9e03-2acb-c107-c1156e171e88','0','0','f') 2018-04-14 19:10:52,466 INFO [http-bio-8443-exec-21] DBRequestor - 7: DBRequestor.login: Dev: test_secure- deviceLogin returned 2018-04-14 19:10:52,467 INFO [http-bio-8443-exec-21] EMServiceServlet - 7: LoginService.executeLogin: Dev: test_secure- Login Successful 2018-04-14 19:10:52,467 INFO [http-bio-8443-exec-21] EMServiceServlet - 7:Request succeeded returning<?xml version="1.0"?> <response> <success/> </response> ### Logout request 2018-04-14 19:11:23,919 INFO [http-bio-8443-exec-3] EMServiceServlet - EMService Request# ----> : 9 2018-04-14 19:11:23,920 DEBUG [http-bio-8443-exec-3] EMServiceServlet - 9: Conn. Via Header= null 2018-04-14 19:11:23,920 DEBUG [http-bio-8443-exec-3] EMServiceServlet - 9: osHost is localHostAddress = 10.106.111.182 2018-04-14 19:11:23,920 INFO [http-bio-8443-exec-3] EMServiceServlet - 9:EM Service: Request type=Login/Logout 2018-04-14 19:11:23,920 INFO [http-bio-8443-exec-3] EMServiceServlet - 9: LoginService.processRequest: Received Request 2018-04-14 19:11:23,920 INFO [http-bio-8443-exec-3] EMServiceServlet - 9:Parsing Request... ### Logout process 2018-04-14 19:11:23,925 INFO [http-bio-8443-exec-3] EMServiceServlet - 9:Executing Logout... 2018-04-14 19:11:23,925 INFO [http-bio-8443-exec-3] EMServiceServlet - 9:Executing Logout for device=test_secure 2018-04-14 19:11:23,925 INFO [http-bio-8443-exec-3] EMServiceServlet - 9: Executing authenticate2... ### Logout successful 2018-04-14 19:11:23,936 INFO [http-bio-8443-exec-3] CMDatabase - CMDatabase:deviceLogout() 2018-04-14 19:11:23,936 INFO [http-bio-8443-exec-3] CMDatabase - CMDatabase:deviceLogout: execute function DeviceLogout
('d72b2e5f-5dd2-51fc-ec50-c9daf98aab66') 2018-04-14 19:11:24,122 INFO [http-bio-8443-exec-3] DBRequestor - 9: DBRequestor.logout: Dev: test_secure- deviceLogout returned 2018-04-14 19:11:24,122 INFO [http-bio-8443-exec-3] EMServiceServlet - 9: LoginService.executeLogout: Dev: test_secure- Logout Successful 2018-04-14 19:11:24,122 INFO [http-bio-8443-exec-3] EMServiceServlet - 9:Request succeeded returning<?xml version="1.0"?> <response> <success/> </response>
2018-04-14 19:09:45,566 INFO [http-bio-8080-exec-10] EMAppServlet - EMApp Request# ----->5 2018-04-14 19:09:45,567 INFO [http-bio-8080-exec-10] EMAppServlet - EMAppServlet: Request protocol is :http 2018-04-14 19:09:45,567 INFO [http-bio-8080-exec-10] EMAppServlet - EMApp Request parameters:
Logout=null Device Name=test_secure User Id=null Device Profile=null Refresh=null Remote Host IP Address = 10.65.40.61 Via Header Set = false getClusterInfo = null
Lang = en_US Charset=utf-8,iso-8859-1;q=0.8 Emcc = null LoginType = null 2018-04-14 19:09:45,568 INFO [http-bio-8080-exec-10] CMDatabase - CMDatabase:checkDeviceAllowsAlternateScript 2018-04-14 19:09:45,580 INFO [http-bio-8080-exec-10] CMDatabase - test_secure with model 30016 and locale 1 does not support alternate script 2018-04-14 19:09:45,580 INFO [http-bio-8080-exec-10] EMAppServlet - Alternate Script for device test_secure = 2018-04-14 19:09:45,581 DEBUG [http-bio-8080-exec-10] EMServiceCommunicator - Posting to EM Service:<query> <appInfo> <appID>CCMSysUser</appID> <appEncryptedCertificate>xxxxxxx</appEncryptedCertificate> </appInfo> <deviceUserQuery> <deviceName>test_secure</deviceName> <remoteIPAddr>10.65.40.61</remoteIPAddr> </deviceUserQuery> </query> 2018-04-14 19:09:45,581 INFO [http-bio-8080-exec-10] EMServiceCommunicator - Posting to EM Query Service:
https://localhost:8443/emservice/EMServiceServlet 2018-04-14 19:09:45,581 DEBUG [http-bio-8080-exec-10] EMServiceCommunicator - postMsg: EMService URL is : https://localhost:8443/emservice/EMServiceServlet 2018-04-14 19:09:45,808 INFO [http-bio-8080-exec-10] EMAppServlet - The login status result for :test_secure:null:null:null:no 2018-04-14 19:09:45,809 INFO [http-bio-8080-exec-10] CMDatabase - CMDatabase:checkDeviceAllowsAlternateScript 2018-04-14 19:09:45,811 INFO [http-bio-8080-exec-10] CMDatabase - test_secure with model 30016 and locale 1 does not support alternate script 2018-04-14 19:09:45,812 INFO [http-bio-8080-exec-10] EMAppServlet - Sent login page for device test_secure 2018-04-14 19:09:45,812 INFO [http-bio-8080-exec-10] EMAppServlet - findPreferredCharSet on utf-8,iso-8859-1;q=0.8 2018-04-14 19:09:45,812 INFO [http-bio-8080-exec-10] EMAppServlet - token1 = utf-8 2018-04-14 19:09:45,812 INFO [http-bio-8080-exec-10] EMAppServlet - token2 = utf-8 2018-04-14 19:09:45,813 INFO [http-bio-8080-exec-10] EMAppServlet - charset with q value is 1 utf-8 2018-04-14 19:09:45,813 INFO [http-bio-8080-exec-10] EMAppServlet - returning charset as q value is 1 utf-8 2018-04-14 19:09:45,813 INFO [http-bio-8080-exec-10] EMAppServlet - my charset =utf-8 2018-04-14 19:10:51,885 INFO [http-bio-8080-exec-23] EMAppServlet - EMApp Request# ----->6 2018-04-14 19:10:51,886 INFO [http-bio-8080-exec-23] EMAppServlet - EMAppServlet: Request protocol is :http 2018-04-14 19:10:51,886 INFO [http-bio-8080-exec-23] EMAppServlet - EMApp Request parameters: Logout=null Device Name=test_secure User Id=EMuser Device Profile=null Refresh=null
Remote Host IP Address = 10.65.40.61 Via Header Set = false getClusterInfo = null Lang = en_US Charset=utf-8,iso-8859-1;q=0.8 Emcc = null LoginType = null 2018-04-14 19:10:51,894 DEBUG [http-bio-8080-exec-23] EMAppServlet - isUserLocal: userid = EMuser 2018-04-14 19:10:51,895 DEBUG [http-bio-8080-exec-23] EMServiceCommunicator - Posting to EM Service:<query><appInfo><appID>CCMSysUser</appID><appEncryptedCertificate>xxxxxxx
</appEncryptedCertificate></appInfo><checkUser><userID>EMuser</userID><remoteIPAddr>10.65.40.61</remoteIPAddr><isViaHeaderSet>false</isViaHeaderSet></checkUser></query> 2018-04-14 19:10:51,895 INFO [http-bio-8080-exec-23] EMServiceCommunicator - Posting to EM Query Service:https://localhost:8443/emservice/EMServiceServlet 2018-04-14 19:10:51,896 DEBUG [http-bio-8080-exec-23] EMServiceCommunicator - postMsg: EMService URL is : https://localhost:8443/emservice/EMServiceServlet 2018-04-14 19:10:51,957 DEBUG [http-bio-8080-exec-23] XMLGenParser - XMLUtil.getDocumentFromStream 2018-04-14 19:10:51,957 DEBUG [http-bio-8080-exec-23] XMLGenParser - XMLUtil.getValueFromDocument 2018-04-14 19:10:51,958 INFO [http-bio-8080-exec-23] EMAppServlet - User 'EMuser' exists locally 2018-04-14 19:10:51,958 INFO [http-bio-8080-exec-23] EMAppServlet - EM Request for EMuser 2018-04-14 19:10:52,010 INFO [http-bio-8080-exec-23] EMAppServlet - User authentication complete for user EMuser 2018-04-14 19:10:52,011 DEBUG [http-bio-8080-exec-23] CMDatabase - Userid being passed to the query is EMuser 2018-04-14 19:10:52,011 DEBUG [http-bio-8080-exec-23] CMDatabase - CMDatabase.getEndUserInfo - Query is - SELECT Device.name, Device.tkDeviceProfile, EndUserDeviceMap.defaultprofile
FROM Device INNER JOIN EndUserDeviceMap ON Device.pkid = EndUserDeviceMap.fkDevice WHERE EndUserDeviceMap.fkEndUser = (SELECT pkid FROM EndUser WHERE my_lower(userid)=my_lower(?)) and device.tkDeviceProfile=1
AND EndUserDeviceMap.tkuserassociation = ? : parameter ( 'EMuser' ) 2018-04-14 19:10:52,014 DEBUG [http-bio-8080-exec-23] CMDatabase - CMDatabase.getEndUserInfo - name : EM2 2018-04-14 19:10:52,025 INFO [http-bio-8080-exec-23] EMAppServlet - Device profiles for user:EMuser=UserInfo: UserID: EMuser Password: Locale: 1 Authentication proxy rights: falseDevice Profiles: EM2 2018-04-14 19:10:52,026 DEBUG [http-bio-8080-exec-23] EMServiceCommunicator - Posting to EM Service:<request> 2018-04-14 19:10:52,471 INFO [http-bio-8080-exec-23] EMAppServlet - Successfully performed Login for user EMuser at test_secure 2018-04-14 19:10:52,472 INFO [http-bio-8080-exec-23] EMAppServlet - findPreferredCharSet on utf-8,iso-8859-1;q=0.8 2018-04-14 19:11:23,896 INFO [http-bio-8080-exec-13] EMAppServlet - EMApp Request# ----->9 2018-04-14 19:11:23,897 INFO [http-bio-8080-exec-13] EMAppServlet - EMAppServlet: Request protocol is :http 2018-04-14 19:11:23,897 INFO [http-bio-8080-exec-13] EMAppServlet - EMApp Request parameters: Logout=true Device Name=test_secure User Id=null
Device Profile=null Refresh=null Remote Host IP Address = 10.65.40.61 Via Header Set = false getClusterInfo = null Lang = en_US Charset=utf-8,iso-8859-1;q=0.8 Emcc = true LoginType = null 2018-04-14 19:11:23,899 DEBUG [http-bio-8080-exec-13] EMServiceCommunicator - Posting to EM Service:<request> <appInfo> <appID>CCMSysUser</appID> <appEncryptedCertificate>xxxxxxx</appEncryptedCertificate> </appInfo> <logout> <deviceName>test_secure</deviceName> <remoteIPAddr>10.65.40.61</remoteIPAddr> <isViaHeaderSet>false</isViaHeaderSet> </logout> </request> 2018-04-14 19:11:23,900 INFO [http-bio-8080-exec-13] EMServiceCommunicator - postMsgToLoginService: Service URL :https://localhost:8443/emservice/EMServiceServlet 2018-04-14 19:11:23,900 DEBUG [http-bio-8080-exec-13] EMServiceCommunicator - postMsg: EMService URL is : https://localhost:8443/emservice/EMServiceServlet 2018-04-14 19:11:24,126 INFO [http-bio-8080-exec-13] EMAppServlet - Successfully performed Logout for user null at test_secure 2018-04-14 19:11:24,127 DEBUG [http-bio-8080-exec-13] EMAppServlet - EMCC: true
### The device profile DN (here 8888) 02760565.000 |19:11:08.329 |SdlSig |CtiDeviceRegisterNotifyWithLineInfo |wait |CTIRegistrar(1,100,237,1) |SIPStationD(1,100,76,128) |1,100,14,8722.2^10.65.40.61^test_secure |[R:N-H:0,N:1,L:2,V:0,Z:0,D:0] deviceName=test_secure EventContent=14 DeviceConfigInfo= Locale=1 AltScrpt= DNDOption=0 ConfigIpAddrMode=3 Hotelling=T Restricted=F OutboundRO=0 BIB=F DNDStatus=F LoginStatus=1 DeviceRegistrationInfo= TerminateMedia=5 ActiveIPAddrMode=0 IPv4=1761650880 IPv6= LoginUser=EMuser ProfilePkid=0bff3cfd-13c1-5352-1a39-9188bdd855d8 Encoding=3 CtiControllable=1 AppCapability=52 UserCapability=20Protocol=2 MultiMediaCapabilityBitMask=3 DeviceMultiMediaInfo= DeviceVideoCapability=0 TelepresenceInfo=0 ScreenCount=0 HuntLogStatus=1 TotalLines=1 LineCount=1 MoreLines=F DN = 8888 Part = PkGpDN = PkGpPart = num RD = 0 StationPid(1,100,76,128) CTIHandlerId(0) LoginStatus=1 ### Request for registering the phone for DN mentioned in the device profile 02760551.004 |19:11:08.219 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.65.40.61 on port 57378 index 12386 with 2203 bytes: [101339,NET] REGISTER sip:10.106.111.182 SIP/2.0 Via: SIP/2.0/TCP 192.168.0.105:57378;branch=z9hG4bK00007806 From: <sip:8888@10.106.111.182>;tag=005056c000010926000036cb-00003151 To: <sip:8888@10.106.111.182> Call-ID: 005056c0-0001027b-00001cf2-00001201@192.168.0.105 Max-Forwards: 70 Date: Sat, 14 Apr 2018 13:40:19 GMT CSeq: 2151 REGISTER User-Agent: Cisco-SIPIPCommunicator/9.1.1 Contact: <sip:f5927b99-efa0-d1a0-8705-e11d9e2ebf0b@192.168.0.105:57378;transport=tcp>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+u.sip!devicename.ccm.features.cisco.com="test_secure";+u.sip!model.ccm.cisco.com="30016" Supported: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-5.1.0,X-cisco-xsi-8.5.1 Reason: SIP;cause=200;text="cisco-alarm:14 Name=SEP005056C00001 Load=CIPC-8-6-6-1 Last=cm-closed-tcp" Expires: 3600 Content-Type: multipart/mixed; boundary=uniqueBoundary Mime-Version: 1.0 Content-Length: 1073 --uniqueBoundary Content-Type: application/x-cisco-remotecc-request+xml Content-Disposition: session;handling=optional <?xml version="1.0" encoding="UTF-8"?> <x-cisco-remotecc-request> <bulkregisterreq> <contact all="true"> <register></register> </contact> </bulkregisterreq> </x-cisco-remotecc-request> --uniqueBoundary Content-Type: application/x-cisco-remotecc-request+xml Content-Disposition: session;handling=optional <?xml version="1.0" encoding="UTF-8"?> <x-cisco-remotecc-request> <optionsind> <combine max="6"> <remotecc> <status></status> </remotecc> <service-control></service-control> </combine> <dialog usage="hook status"> <unot></unot> <sub></sub> </dialog> <dialog usage="shared line"> <unot></unot> <sub></sub> </dialog> <presence usage="blf speed dial"> <unot></unot> <sub></sub> </presence> <joinreq></joinreq> <cfwdall-anyline>No</cfwdall-anyline> <coaching></coaching> <oosalarm></oosalarm> </optionsind> </x-cisco-remotecc-request> ### 200 OK 02760584.001 |19:11:08.334 |AppInfo |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.65.40.61 on port 57378 index 12386 [101341,NET] SIP/2.0 200 OK Via: SIP/2.0/TCP 192.168.0.105:57378;branch=z9hG4bK00007806;received=10.65.40.61 From: <sip:8888@10.106.111.182>;tag=005056c000010926000036cb-00003151 To: <sip:8888@10.106.111.182>;tag=1168208381 Date: Sat, 14 Apr 2018 13:41:08 GMT Call-ID: 005056c0-0001027b-00001cf2-00001201@192.168.0.105 Server: Cisco-CUCM12.0 CSeq: 2151 REGISTER Expires: 120 Contact: <sip:f5927b99-efa0-d1a0-8705-e11d9e2ebf0b@192.168.0.105:57378;transport=tcp>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+u.sip!devicename.ccm.features.cisco.com="test_secure";+u.sip!model.ccm.cisco.com="30016";x-cisco-newreg Supported: X-cisco-srtp-fallback,X-cisco-sis-9.0.0 Content-Type: application/x-cisco-remotecc-response+xml Content-Length: 367 <x-cisco-remotecc-response> <response> <code>200</code> <optionsind> <combine max="6"> <remotecc><status/></remotecc> <service-control/> </combine> <dialog usage="hook status"><unot/></dialog> <dialog usage="shared line"><unot/></dialog> <presence usage="blf speed dial"><unot/></presence> <joinreq></joinreq> </optionsind> </response> </x-cisco-remotecc-response> ### After logout the device again registers with its normal DN (7777) 02760738.004 |19:11:36.004 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.65.40.61 on port 57417 index 12389 with 2203 bytes: [101342,NET] REGISTER sip:10.106.111.182 SIP/2.0 Via: SIP/2.0/TCP 192.168.0.105:57417;branch=z9hG4bK00002532 From: <sip:7777@10.106.111.182>;tag=005056c00001092900001fb0-00000fc1 To: <sip:7777@10.106.111.182> Call-ID: 005056c0-00010285-000046e9-00006cf9@192.168.0.105 Max-Forwards: 70 Date: Sat, 14 Apr 2018 13:40:47 GMT CSeq: 2153 REGISTER User-Agent: Cisco-SIPIPCommunicator/9.1.1 Contact: <sip:479c83c3-cb54-18e8-1ba1-06a9d6b9e33c@192.168.0.105:57417;transport=tcp>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+u.sip!devicename.ccm.features.cisco.com="test_secure";+u.sip!model.ccm.cisco.com="30016" Supported: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-5.1.0,X-cisco-xsi-8.5.1 Reason: SIP;cause=200;text="cisco-alarm:14 Name=SEP005056C00001 Load=CIPC-8-6-6-1 Last=cm-closed-tcp" Expires: 3600 Content-Type: multipart/mixed; boundary=uniqueBoundary Mime-Version: 1.0 Content-Length: 1073 --uniqueBoundary Content-Type: application/x-cisco-remotecc-request+xml Content-Disposition: session;handling=optional <?xml version="1.0" encoding="UTF-8"?> <x-cisco-remotecc-request> <bulkregisterreq> <contact all="true"> <register></register> </contact> </bulkregisterreq> </x-cisco-remotecc-request> --uniqueBoundary Content-Type: application/x-cisco-remotecc-request+xml Content-Disposition: session;handling=optional <?xml version="1.0" encoding="UTF-8"?> <x-cisco-remotecc-request> <optionsind> <combine max="6"> <remotecc> <status></status> </remotecc> <service-control></service-control> </combine> <dialog usage="hook status"> <unot></unot> <sub></sub> </dialog> <dialog usage="shared line"> <unot></unot> <sub></sub> </dialog> <presence usage="blf speed dial"> <unot></unot> <sub></sub> </presence> <joinreq></joinreq> <cfwdall-anyline>No</cfwdall-anyline> <coaching></coaching> <oosalarm></oosalarm> </optionsind> </x-cisco-remotecc-request> ### 200 OK 02760759.001 |19:11:36.114 |AppInfo |//SIP/SIPNormalization/trace_sip_message: Before outbound SIP Normalization msg is: [101344,INT] SIP/2.0 200 OK Via: SIP/2.0/TCP 192.168.0.105:57417;branch=z9hG4bK00002532;received=10.65.40.61 From: <sip:7777@10.106.111.182>;tag=005056c00001092900001fb0-00000fc1 To: <sip:7777@10.106.111.182>;tag=983899518 Date: Sat, 14 Apr 2018 13:41:36 GMT Call-ID: 005056c0-00010285-000046e9-00006cf9@192.168.0.105 Server: Cisco-CUCM12.0 CSeq: 2153 REGISTER Expires: 120 Contact: <sip:479c83c3-cb54-18e8-1ba1-06a9d6b9e33c@192.168.0.105:57417;transport=tcp>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+sip.instance="<urn:uuid:00000000-0000-0000-0000-005056c00001>";+u.sip!devicename.ccm.features.cisco.com="test_secure";+u.sip!model.ccm.cisco.com="30016";x-cisco-newreg Supported: X-cisco-srtp-fallback,X-cisco-sis-9.0.0 Content-Type: application/x-cisco-remotecc-response+xml Content-Length: 367 <x-cisco-remotecc-response> <response> <code>200</code> <optionsind> <combine max="6"> <remotecc><status/></remotecc> <service-control/> </combine> <dialog usage="hook status"><unot/></dialog> <dialog usage="shared line"><unot/></dialog> <presence usage="blf speed dial"><unot/></presence> <joinreq></joinreq> </optionsind> </response> </x-cisco-remotecc-response>
このドキュメントでは、一般的に発生するエラーコードについて説明します。
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/trouble/8_6_1/trbl861/tbfeat.pdf
このドキュメントでは、一般的なエラーとその修正について説明します。