この製品のドキュメントセットは、偏向のない言語を使用するように配慮されています。このドキュメントセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブ ランゲージの取り組みの詳細は、こちらをご覧ください。
シスコは世界中のユーザにそれぞれの言語でサポート コンテンツを提供するために、機械と人による翻訳を組み合わせて、本ドキュメントを翻訳しています。ただし、最高度の機械翻訳であっても、専門家による翻訳のような正確性は確保されません。シスコは、これら翻訳の正確性について法的責任を負いません。原典である英語版(リンクからアクセス可能)もあわせて参照することを推奨します。
この記事では、クライアントとレイヤ 2 トンネリング プロトコル アクセス コンセントレータ(LNS)間にバーチャル プライベート ダイヤルアップ ネットワーク(VPDN)を介してマルチリンク ポイントツーポイント プロトコル(MLPPP)セッションを確立するのに役立つ、クライアント、LAC およびレイヤ2 トンネリング プロトコル ネットワークサーバ(LNA)の構成について説明します。
この設定を行う前に、以下の要件を満たしていることを確認してください。
このドキュメントの内容は、特定のソフトウェアやハードウェアのバージョンに限定されるものではありません。
このドキュメントの情報は、特定のラボ環境にあるデバイスに基づいて作成されました。このドキュメントで使用するすべてのデバイスは、初期(デフォルト)設定の状態から起動しています。対象のネットワークが実稼働中である場合には、どのようなコマンドについても、その潜在的な影響について確実に理解しておく必要があります。
注:このセクションで使用されるコマンドの詳細については、Command Lookup Tool(登録ユーザ専用)を使用してください。
注:PPP またはマルチリンク PPP セッションの開始時における PPP 制御パケット交換の際には、マルチリンク PPP セッションは、CPE と LNS との間(LAC との間ではなく)でネゴシエートされます。LAC は、マルチリンク PPP セッションについて認識しません。そのため、CPE が PPP-LCP セッションを開始すると、LCP ネゴシエーションの一部として含まれるマルチリンク(Maximum Receive Reconstructed Unit(MRRU))ネゴシエーションは、LAC が LNS との接続をまだ確立していない場合(通常は確立していません)に失敗することがあります。 LAC と LNS 間で IP 到達可能性が確立されると、LNS は CPE とマルチリンク(MRRU)LCP オプションを再ネゴシエートし、2 つのピア デバイスがエンドツーエンドのマルチリンク PPP セッションを確立できるようになります。
クライアントの設定
クライアント ルータの設定の例は次のとおりです。
interface Ethernet0/0
IPアドレスがありません
pppoe enable group global
pppoe-client dial-pool-number 1
interface Dialer1
bandwidth 64
ip address negotiated
encapsulation ppp
dialer pool 1
dialer idle-timeout 0
keepalive 30
ppp max-failure 30
ppp chap hostname user@cisco.com
ppp chap password cisco
ppp multilink
no cdp enable
LAC 設定
LAC ルータの設定例を次に示します。
hostname LAC
!
vpdn enable
!
vpdn-group 1
request-dialin
protocol l2tp
domain cisco.com
initiate-to ip 192.168.1.2
no l2tp tunnel authentication
!
bba-group pppoe global
virtual-template 1
!
interface Ethernet0/0
IPアドレスがありません
pppoe enable group global
interface Ethernet1/0
ip address 192.168.1.1 255.255.255.0
interface Virtual-Template1
IPアドレスがありません
ppp authentication chap
ppp multilink
LNS の設定
LNS ルータの設定例を次に示します。
vpdn enable
!
vpdn-group 1
accept-dialin
protocol l2tp
virtual-template 1
terminate-from hostname LAC
lcp renegotiation on-mismatch
no l2tp tunnel authentication
!
username user@cisco.com password cisco
int loopback0
ip address 10.10.10.10 255.255.255.0
interface Ethernet1/0
ip address 192.168.1.2 255.255.255.0
interface Virtual-Template1
mtu 1492
ip unnumbered Loopback0
peer default ip address pool cisco
ppp authentication chap
ppp multilink
!
ip local pool cisco 10.10.10.11 10.10.10.24
次のデバッグが、クライアント、LAC、LNS で有効であることを確認します。
クライアント ログ:
*Jan 14 11:01:12.744:Sending PADI:Interface = Ethernet0/0
*Jan 14 11:01:12.744:PPPoE 0:I PADO R:aabb.cc02.bd00 L:aabb.cc02.bc00 Et0/0
*Jan 14 11:01:14.824:PPPOE:we've got our pado and the pado timer went off
*Jan 14 11:01:14.824:OUT PADR from PPPoE Session
*Jan 14 11:01:14.825:PPPoE 9:I PADS R:aabb.cc02.bd00 L:aabb.cc02.bc00 Et0/0
*Jan 14 11:01:14.825:IN PADS from PPPoE Session
*Jan 14 11:01:14.825:%DIALER-6-BIND:Interface Vi3 bound to profile Di1
*Jan 14 11:01:14.825:PPPOE:Virtual Access interface obtained.
*Jan 14 11:01:14.825:PPPOE:encap string prepared
*Jan 14 11:01:14.825:[0]PPPoE 9:data path set to PPPoE Client
*Jan 14 11:01:14.834:%LINK-3-UPDOWN:Interface Virtual-Access3, changed state to up
*Jan 14 11:01:14.834:Vi3 PPP:Sending cstate UP notification
*Jan 14 11:01:14.834:Vi3 PPP:Processing CstateUp message
*Jan 14 11:01:14.834:PPP:Alloc Context [2A970D92E8]
*Jan 14 11:01:14.834:ppp14 PPP:Phase is ESTABLISHING
*Jan 14 11:01:14.834:Vi3 PPP:Using dialer call direction
*Jan 14 11:01:14.834:Vi3 PPP:Treating connection as a callout
*Jan 14 11:01:14.834:Vi3 PPP:Session handle[C2000013] Session id[14]
*Jan 14 11:01:14.834:Vi3 LCP:Event[OPEN] State[Initial to Starting]
*Jan 14 11:01:14.834:Vi3 PPP:No remote authentication for call-out
*Jan 14 11:01:14.834:Vi3 LCP:O CONFREQ [Starting] id 1 len 30
*Jan 14 11:01:14.834:Vi3 LCP: MagicNumber 0xBC220EF6 (0x0506BC220EF6)
*Jan 14 11:01:14.835:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.835:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.835:Vi3 LCP:Event[UP] State[Starting to REQsent]
*Jan 14 11:01:14.835:Vi3 LCP:I CONFREQ [REQsent] id 1 len 29
*Jan 14 11:01:14.835:Vi3 LCP: MRU 1492 (0x010405D4)
*Jan 14 11:01:14.835:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.835:Vi3 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.835:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.835:Vi3 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.835:Vi3 LCP:O CONFNAK [REQsent] id 1 len 8
*Jan 14 11:01:14.835:Vi3 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.835:Vi3 LCP:Event[Receive ConfReq-] State[REQsent to REQsent]
*Jan 14 11:01:14.835:Vi3 LCP:I CONFACK [REQsent] id 1 len 30
*Jan 14 11:01:14.835:Vi3 LCP: MagicNumber 0xBC220EF6 (0x0506BC220EF6)
*Jan 14 11:01:14.835:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.835:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.835:Vi3 LCP:Event[Receive ConfAck] State[REQsent to ACKrcvd]
*Jan 14 11:01:14.836:Vi3 LCP:I CONFREQ [ACKrcvd] id 2 len 29
*Jan 14 11:01:14.836:Vi3 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.836:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.836:Vi3 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.836:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.836:Vi3 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.836:Vi3 LCP:O CONFACK [ACKrcvd] id 2 len 29
*Jan 14 11:01:14.836:Vi3 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.836:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.836:Vi3 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.836:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.836:Vi3 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.836:Vi3 LCP:Event[Receive ConfReq+] State[ACKrcvd to Open]
*Jan 14 11:01:14.854:Vi3 PPP:Phase is AUTHENTICATING, by the peer
*Jan 14 11:01:14.854:Vi3 LCP:State is Open
*Jan 14 11:01:14.856:Vi3 CHAP:I CHALLENGE id 1 len 24 from "LAC"
*Jan 14 11:01:14.856:Vi3 CHAP:Using hostname from interface CHAP
*Jan 14 11:01:14.856:Vi3 CHAP:Using password from interface CHAP
*Jan 14 11:01:14.856:Vi3 CHAP:O RESPONSE id 1 len 34 from "user@cisco.com"
*Jan 14 11:01:14.861:Vi3 LCP:I CONFREQ [Open] id 1 len 39
*Jan 14 11:01:14.861:Vi3 LCP: MRU 1492 (0x010405D4)
*Jan 14 11:01:14.861:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.861:Vi3 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.861:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.861:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.861:Vi3 PPP DISC:PPP Renegotiating
*Jan 14 11:01:14.861:PPP:NET STOP send to AAA.
*Jan 14 11:01:14.861:Vi3 LCP:Event[LCP Reneg] State[Open to Open]
*Jan 14 11:01:14.861:Vi3 LCP:Event[DOWN] State[Open to Starting]
*Jan 14 11:01:14.861:Vi3 PPP:Phase is DOWN
*Jan 14 11:01:14.861:PPP:Alloc Context [2A970D9898]
*Jan 14 11:01:14.861:ppp14 PPP:Phase is ESTABLISHING
*Jan 14 11:01:14.861:Vi3 PPP:Using dialer call direction
*Jan 14 11:01:14.861:Vi3 PPP:Treating connection as a callout
*Jan 14 11:01:14.861:Vi3 PPP:Session handle[2B000014] Session id[14]
*Jan 14 11:01:14.861:Vi3 LCP:Event[OPEN] State[Initial to Starting]
*Jan 14 11:01:14.861:Vi3 PPP:No remote authentication for call-out
*Jan 14 11:01:14.861:Vi3 LCP:O CONFREQ [Starting] id 1 len 30
*Jan 14 11:01:14.861:Vi3 LCP: MagicNumber 0xBC220F12 (0x0506BC220F12)
*Jan 14 11:01:14.861:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.861:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:Vi3 LCP:Event[UP] State[Starting to REQsent]
*Jan 14 11:01:14.862:Vi3 LCP:I CONFREQ [REQsent] id 1 len 39
*Jan 14 11:01:14.862:Vi3 LCP: MRU 1492 (0x010405D4)
*Jan 14 11:01:14.862:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.862:Vi3 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.862:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:Vi3 PPP:Remote endpoint user@cisco.com invalid, matches local value
*Jan 14 11:01:14.862:Vi3 LCP:O CONFNAK [REQsent] id 1 len 8
*Jan 14 11:01:14.862:Vi3 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.862:Vi3 LCP:Event[Receive ConfReq-] State[REQsent to REQsent]
*Jan 14 11:01:14.862:Vi3 LCP:I CONFACK [REQsent] id 1 len 30
*Jan 14 11:01:14.862:Vi3 LCP: MagicNumber 0xBC220F12 (0x0506BC220F12)
*Jan 14 11:01:14.862:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:Vi3 LCP:Event[Receive ConfAck] State[REQsent to ACKrcvd]
*Jan 14 11:01:14.862:Vi3 LCP:I CONFREQ [ACKrcvd] id 2 len 39
*Jan 14 11:01:14.862:Vi3 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.862:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.862:Vi3 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.862:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:Vi3 PPP:Remote endpoint user@cisco.com invalid, matches local value
*Jan 14 11:01:14.862:Vi3 LCP:O CONFACK [ACKrcvd] id 2 len 39
*Jan 14 11:01:14.862:Vi3 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.862:Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.862:Vi3 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.862:Vi3 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:Vi3 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:Vi3 LCP:Event[Receive ConfReq+] State[ACKrcvd to Open]
*Jan 14 11:01:14.884:Vi3 PPP:Phase is AUTHENTICATING, by the peer
*Jan 14 11:01:14.884:Vi3 LCP:State is Open
*Jan 14 11:01:14.895:Vi3 CHAP:I CHALLENGE id 2 len 27 from "LNS"
*Jan 14 11:01:14.895:Vi3 CHAP:Using hostname from interface CHAP
*Jan 14 11:01:14.895:Vi3 CHAP:Using password from interface CHAP
*Jan 14 11:01:14.895:Vi3 CHAP:O RESPONSE id 2 len 34 from "user@cisco.com"
*Jan 14 11:01:14.896:Vi3 CHAP:I SUCCESS id 2 len 4
*Jan 14 11:01:14.896:Vi3 PPP:Phase is FORWARDING, Attempting Forward
*Jan 14 11:01:14.897:Vi3 PPP:Phase is ESTABLISHING, Finish LCP
*Jan 14 11:01:14.897:Vi3 MLP:Request add link to bundle
*Jan 14 11:01:14.897:Vi3 PPP:Phase is VIRTUALIZED
*Jan 14 11:01:14.897:Vi3 MLP:Adding link to bundle
*Jan 14 11:01:14.897:Vi3 MLP:Requested bundle vaccess creation
*Jan 14 11:01:14.897:Vi3 MLP:Determine clone source for SSS
*Jan 14 11:01:14.897:Vi3 MLP:Clone from dialer profile Di1
*Jan 14 11:01:14.897:Vi3 MLP:Determine clone source for SSS
*Jan 14 11:01:14.897:Vi3 MLP:Clone from dialer profile Di1
*Jan 14 11:01:14.897:Vi3 MLP:SSS connect, bundle interface Vi4
*Jan 14 11:01:14.897:PPP:Alloc Context [2A970D95C0]
*Jan 14 11:01:14.897:ppp15 PPP:Phase is ESTABLISHING
*Jan 14 11:01:14.897:Vi4 MLP:Changing bundle bandwidth from 100000 to 64
*Jan 14 11:01:14.897:Vi4 MLP:Bandwidth manually configured, updating lost frag timeout on bundle
*Jan 14 11:01:14.897:Vi4 MLP:Increasing lost frag timeout from 100 to 1524 ms due to slippage constraints
*Jan 14 11:01:14.897:Vi4 MLP:Increasing lost frag timeout from 100 to 1524 ms due to slippage constraints
*Jan 14 11:01:14.897:%DIALER-6-BIND:Interface Vi4 bound to profile Di1
*Jan 14 11:01:14.897:Vi4 MLP:Added to dialer pool Di1
*Jan 14 11:01:14.897:Vi4 MLP:Ready to finish adding link Vi3 to bundle
*Jan 14 11:01:14.897:Vi4 MLP:Update bundle bandwidth 64 set 64
*Jan 14 11:01:14.897:Vi3 MLP:Change transmit status from Init to Enabled, transmit links 1
*Jan 14 11:01:14.897:Vi4 MLP:Idle timer running, restart
*Jan 14 11:01:14.897:Vi4 MLP:Added first link Vi3 to bundle LNS
*Jan 14 11:01:14.897:Vi4 MLP:Increasing lost frag timeout from 100 to 1524 ms due to slippage constraints
*Jan 14 11:01:14.898:Vi3 MLP:Updating bundle's PPP handle[0x6F000015] in SSS context
*Jan 14 11:01:14.898:%LINEPROTO-5-UPDOWN:Line protocol on Interface Virtual-Access3, changed state to up
*Jan 14 11:01:14.898:Vi4 MLP:Received segment updated message for bundle
*Jan 14 11:01:14.914:%LINK-3-UPDOWN:Interface Virtual-Access4, changed state to up
*Jan 14 11:01:14.914:Vi4 PPP:Force LCP OPEN on MLP Bundle
*Jan 14 11:01:14.914:Vi4 PPP:Phase is UP
*Jan 14 11:01:14.914:Vi4 IPCP:プロトコルが設定され、CPの状態が開始されます[初期]
*Jan 14 11:01:14.914:Vi4 IPCP:Event[OPEN] State[Initial to Starting]
*Jan 14 11:01:14.914:Vi4 IPCP:O CONFREQ [Starting] id 1 len 10
*Jan 14 11:01:14.914:Vi4 IPCP: Address 0.0.0.0 (0x030600000000)
*Jan 14 11:01:14.914:Vi4 IPCP:Event[UP] State[Starting to REQsent]
*Jan 14 11:01:14.915:Vi4 IPCP:I CONFREQ [REQsent] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.10 (0x03060A0A0A0A)
*Jan 14 11:01:14.915:Vi4 IPCP:O CONFACK [REQsent] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.10 (0x03060A0A0A0A)
*Jan 14 11:01:14.915:Vi4 IPCP:Event[Receive ConfReq+] State[REQsent to ACKsent]
*Jan 14 11:01:14.915:%LINEPROTO-5-UPDOWN:Line protocol on Interface Virtual-Access4, changed state to up
*Jan 14 11:01:14.915:Vi4 IPCP:I CONFNAK [ACKsent] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.18 (0x03060A0A0A12)
*Jan 14 11:01:14.915:Vi4 IPCP:O CONFREQ [ACKsent] id 2 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.18 (0x03060A0A0A12)
*Jan 14 11:01:14.915:Vi4 IPCP:Event[Receive ConfNak/Rej] State[ACKsent to ACKsent]
*Jan 14 11:01:14.936:Vi4 IPCP:I CONFACK [ACKsent] id 2 len 10
*Jan 14 11:01:14.936:Vi4 IPCP: Address 10.10.10.18 (0x03060A0A0A12)
*Jan 14 11:01:14.936:Vi4 IPCP:Event[Receive ConfAck] State[ACKsent to Open]
*Jan 14 11:01:14.954:Vi4 IPCP:State is Open
*Jan 14 11:01:14.954:Di1 IPCP:Install negotiated IP interface address 10.10.10.18
*Jan 14 11:01:14.954:Di1 Added to neighbor route AVL tree:topoid 0, address 10.10.10.10
*Jan 14 11:01:14.954:Di1 IPCP:Install route to 10.10.10.10
Client#show ppp all
Interface/ID OPEN+ Nego* Fail- Stage Peer Address Peer Name
— — — —
Vi4 IPCP+ LocalT 10.10.10.10 LNS
Vi3 LCP+ LocalT 10.10.10.10 LNS
Client#show ppp multilink
Virtual-Access4
Bundle name:LNS
Remote Username:LNS
Remote Endpoint Discriminator:[1] user@cisco.com
Local Username:user@cisco.com
Local Endpoint Discriminator:[1] user@cisco.com
Bundle up for 00:00:17, total bandwidth 64, load 1/255
Receive buffer limit 12192 bytes, frag timeout 1524 ms
Dialer interface is Dialer1
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x3 received sequence, 0x0 sent sequence
Member links:1 (max 255, min not set)
Vi3, since 00:00:17
No inactive multilink interfaces
LAC ログ:
*Jan 14 11:01:12.744:PPPoE 0:I PADI R:aabb.cc02.bc00 L:ffff.ffff.ffff Et0/0
*Jan 14 11:01:12.744:Service tag:NULL Tag
*Jan 14 11:01:12.744:PPPoE 0:O PADO, R:aabb.cc02.bd00 L:aabb.cc02.bc00 Et0/0
*Jan 14 11:01:12.744:Service tag:NULL Tag
*Jan 14 11:01:14.824:PPPoE 0:I PADR R:aabb.cc02.bc00 L:aabb.cc02.bd00 Et0/0
*Jan 14 11:01:14.824:Service tag:NULL Tag
*Jan 14 11:01:14.824:PPPOE:encap string prepared
*Jan 14 11:01:14.824:[9]PPPoE 9:Access IE handle allocated
*Jan 14 11:01:14.824:[9]PPPoE 9:AAA unique ID 17 allocated
*Jan 14 11:01:14.824:[9]PPPoE 9:No AAA accounting method list
*Jan 14 11:01:14.824:[9]PPPoE 9:Service request sent to SSS
*Jan 14 11:01:14.824:[9]PPPoE 9:Created, Service:None R:aabb.cc02.bd00 L:aabb.cc02.bc00 Et0/0
*Jan 14 11:01:14.825:[9]PPPoE 9:State NAS_PORT_POLICY_INQUIRY Event SSS MORE KEYS
*Jan 14 11:01:14.825:PPP:Alloc Context [2A970D9898]
*Jan 14 11:01:14.825:ppp9 PPP:Phase is ESTABLISHING
*Jan 14 11:01:14.825:[9]PPPoE 9:data path set to PPP
*Jan 14 11:01:14.825:[9]PPPoE 9:Segment (SSS class):PROVISION
*Jan 14 11:01:14.825:[9]PPPoE 9:State PROVISION_PPP Event SSM PROVISIONED
*Jan 14 11:01:14.825:[9]PPPoE 9:O PADS R:aabb.cc02.bc00 L:aabb.cc02.bd00 Et0/0
*Jan 14 11:01:14.825:ppp9 PPP:Using vpn set call direction
*Jan 14 11:01:14.825:ppp9 PPP:Treating connection as a callin
*Jan 14 11:01:14.825:ppp9 PPP:Session handle[B4000009] Session id[9]
*Jan 14 11:01:14.825:ppp9 LCP:Event[OPEN] State[Initial to Starting]
*Jan 14 11:01:14.825:ppp9 PPP LCP:Enter passive mode, state[Stopped]
*Jan 14 11:01:14.835:ppp9 LCP:I CONFREQ [Stopped] id 1 len 30
*Jan 14 11:01:14.835:ppp9 LCP: MagicNumber 0xBC220EF6 (0x0506BC220EF6)
*Jan 14 11:01:14.835:ppp9 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.835:ppp9 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.835:ppp9 LCP:O CONFREQ [Stopped] id 1 len 29
*Jan 14 11:01:14.835:ppp9 LCP: MRU 1492 (0x010405D4)
*Jan 14 11:01:14.835:ppp9 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.835:ppp9 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.835:ppp9 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.835:ppp9 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.835:ppp9 LCP:O CONFACK [Stopped] id 1 len 30
*Jan 14 11:01:14.835:ppp9 LCP: MagicNumber 0xBC220EF6 (0x0506BC220EF6)
*Jan 14 11:01:14.835:ppp9 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.835:ppp9 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.835:ppp9 LCP:Event[Receive ConfReq+] State[Stopped to ACKsent]
*Jan 14 11:01:14.836:ppp9 LCP:I CONFNAK [ACKsent] id 1 len 8
*Jan 14 11:01:14.836:ppp9 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.836:ppp9 LCP:O CONFREQ [ACKsent] id 2 len 29
*Jan 14 11:01:14.836:ppp9 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.836:ppp9 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.836:ppp9 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.836:ppp9 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.836:ppp9 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.836:ppp9 LCP:Event[Receive ConfNak/Rej] State[ACKsent to ACKsent]
*Jan 14 11:01:14.836:ppp9 LCP:I CONFACK [ACKsent] id 2 len 29
*Jan 14 11:01:14.836:ppp9 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.836:ppp9 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.836:ppp9 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.836:ppp9 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.836:ppp9 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.836:ppp9 LCP:Event[Receive ConfAck] State[ACKsent to Open]
*Jan 14 11:01:14.856:ppp9 PPP:Phase is AUTHENTICATING, by this end
*Jan 14 11:01:14.856:ppp9 CHAP:O CHALLENGE id 1 len 24 from "LAC"
*Jan 14 11:01:14.856:ppp9 LCP:State is Open
*Jan 14 11:01:14.856:ppp9 CHAP:I RESPONSE id 1 len 34 from "user@cisco.com"
*Jan 14 11:01:14.856:ppp9 PPP:Phase is FORWARDING, Attempting Forward
*Jan 14 11:01:14.856:VPDN CALL [uid:9]:Requesting connection
*Jan 14 11:01:14.856:VPDN CALL [uid:9]:Call request sent
*Jan 14 11:01:14.857:[9]PPPoE 9:Access IE nas port called
*Jan 14 11:01:14.857:VPDN uid:9 Obtained connect speeds are TX(10000000) RX(10000000)
*Jan 14 11:01:14.857:VPDN uid:9 Obtained connect speeds are TX(10000000) RX(10000000)
*Jan 14 11:01:14.857:VPDN uid:9 L2TUN socket session connect requested for socket handle F600000C
*Jan 14 11:01:14.857:VPDN uid:9 Setting up dataplane for L2-L2, no idb
*Jan 14 11:01:14.857:VPDN MGR [uid:9]:Initiating compulsory connection to 192.168.1.2
*Jan 14 11:01:14.857:[9]PPPoE 9:State LCP_NEGOTIATION Event PPP FORWARDING
*Jan 14 11:01:14.857:[9]PPPoE 9:Segment (SSS class):UPDATED
*Jan 14 11:01:14.857:[9]PPPoE 9:SSS switch updated
*Jan 14 11:01:14.859:VPDN Received L2TUN socket message Status
*Jan 14 11:01:14.859:VPDN uid:9 cannot find swidb for session
*Jan 14 11:01:14.859:[9]PPPoE 9:Segment (SSS class):BOUND
*Jan 14 11:01:14.859:[9]PPPoE 9:data path set to SSS Switch
*Jan 14 11:01:14.859:VPDN Received L2TUN socket message Connected
*Jan 14 11:01:14.859:VPDN MGR [uid:9]:Succeed to forward user@cisco.com
*Jan 14 11:01:14.859:VPDN uid:9 VPDN session up
*Jan 14 11:01:14.859:VPDN CALL [uid:9]:Connection succeeded
*Jan 14 11:01:14.860:ppp9 PPP:Phase is FORWARDED, Session Forwarded
*Jan 14 11:01:14.860:[9]PPPoE 9:State LCP_NEGOTIATION Event PPP FORWARDED
*Jan 14 11:01:14.860:[9]PPPoE 9:Connected Forwarded
LAC#show ppp all
Interface/ID OPEN+ Nego* Fail- Stage Peer Address Peer Name
— — — —
0xB4000009 LCP+ CHAP* Fwded 0.0.0.0 user@cisco.com
LAC#show ppp multilink
No active bundles
No inactive multilink interfaces
LNS ログ:
*Jan 14 11:01:14.858:VPDN Received L2TUN socket message Incoming
*Jan 14 11:01:14.859:VPDN uid:13 L2TUN socket session accept requested
*Jan 14 11:01:14.859:VPDN uid:13 Setting up dataplane for L2-L2, no idb
*Jan 14 11:01:14.860:VPDN Received L2TUN socket message Connected
*Jan 14 11:01:14.860:VPDN uid:13 VPDN session up
*Jan 14 11:01:14.860:PPP:Alloc Context [2A970D95C0]
*Jan 14 11:01:14.860:ppp13 PPP:Phase is ESTABLISHING
*Jan 14 11:01:14.860:ppp13 LCP:Event[Jam Start] State[Initial to Closed]
*Jan 14 11:01:14.860:ppp13 LCP:I FORCED rcvd CONFACK len 29
*Jan 14 11:01:14.861:ppp13 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.861:ppp13 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.861:ppp13 LCP: MagicNumber 0xBC21F6F0 (0x0506BC21F6F0)
*Jan 14 11:01:14.861:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.861:ppp13 LCP: EndpointDisc 1 LAC (0x1306014C4143)
*Jan 14 11:01:14.861:ppp13 PPP:LCP not accepting rcv CONFACK
*Jan 14 11:01:14.861:ppp13 LCP:I FORCED sent CONFACK len 30
*Jan 14 11:01:14.861:ppp13 LCP: MagicNumber 0xBC220EF6 (0x0506BC220EF6)
*Jan 14 11:01:14.861:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.861:ppp13 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.861:ppp13 LCP:Event[DOWN] State[Closed to Initial]
*Jan 14 11:01:14.861:ppp13 LCP:Event[CLOSE] State[Initial to Initial]
*Jan 14 11:01:14.861:ppp13 LCP:Event[OPEN] State[Initial to Starting]
*Jan 14 11:01:14.861:ppp13 LCP:O CONFREQ [Starting] id 1 len 39
*Jan 14 11:01:14.861:ppp13 LCP: MRU 1492 (0x010405D4)
*Jan 14 11:01:14.861:ppp13 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.861:ppp13 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.861:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.861:ppp13 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.861:ppp13 LCP:Event[UP] State[Starting to REQsent]
*Jan 14 11:01:14.862:ppp13 LCP:I CONFREQ [REQsent] id 1 len 30
*Jan 14 11:01:14.862:ppp13 LCP: MagicNumber 0xBC220F12 (0x0506BC220F12)
*Jan 14 11:01:14.862:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:ppp13 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:ppp13 PPP:Remote endpoint user@cisco.com invalid, matches local value
*Jan 14 11:01:14.862:ppp13 LCP:O CONFACK [REQsent] id 1 len 30
*Jan 14 11:01:14.862:ppp13 LCP: MagicNumber 0xBC220F12 (0x0506BC220F12)
*Jan 14 11:01:14.862:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:ppp13 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:ppp13 LCP:Event[Receive ConfReq+] State[REQsent to ACKsent]
*Jan 14 11:01:14.862:ppp13 LCP:I CONFNAK [ACKsent] id 1 len 8
*Jan 14 11:01:14.862:ppp13 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.862:ppp13 LCP:O CONFREQ [ACKsent] id 2 len 39
*Jan 14 11:01:14.862:ppp13 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.862:ppp13 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.862:ppp13 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.862:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.862:ppp13 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.862:ppp13 LCP:Event[Receive ConfNak/Rej] State[ACKsent to ACKsent]
*Jan 14 11:01:14.863:ppp13 LCP:I CONFACK [ACKsent] id 2 len 39
*Jan 14 11:01:14.863:ppp13 LCP: MRU 1500 (0x010405DC)
*Jan 14 11:01:14.863:ppp13 LCP: AuthProto CHAP (0x0305C22305)
*Jan 14 11:01:14.863:ppp13 LCP: MagicNumber 0xBC21E526 (0x0506BC21E526)
*Jan 14 11:01:14.863:ppp13 LCP: MRRU 1524 (0x110405F4)
*Jan 14 11:01:14.863:ppp13 LCP: EndpointDisc 1 user@cisco.com (0x1310017573657240737572662E6F7267)
*Jan 14 11:01:14.863:ppp13 LCP:Event[Receive ConfAck] State[ACKsent to Open]
*Jan 14 11:01:14.895:ppp13 PPP:Phase is AUTHENTICATING, by this end
*Jan 14 11:01:14.895:ppp13 CHAP:O CHALLENGE id 2 len 27 from "LNS"
*Jan 14 11:01:14.895:ppp13 LCP:State is Open
*Jan 14 11:01:14.895:ppp13 CHAP:I RESPONSE id 2 len 34 from "user@cisco.com"
*Jan 14 11:01:14.895:ppp13 PPP:Phase is FORWARDING, Attempting Forward
*Jan 14 11:01:14.895:ppp13 PPP:Phase is AUTHENTICATING, Unauthenticated User
*Jan 14 11:01:14.895:ppp13 PPP:Phase is FORWARDING, Attempting Forward
*Jan 14 11:01:14.896:VPDN uid:13 Virtual interface created for user@cisco.com bandwidth 10000 Kbps
*Jan 14 11:01:14.896:VPDN Vi3 Virtual interface created for user@cisco.com, bandwidth 10000 Kbps
L2X_ADJ:Vi3:allocated ctx, size 1
*Jan 14 11:01:14.896:VPDN Received L2TUN socket message Data UP
*Jan 14 11:01:14.896:Vi3 PPP:Phase is AUTHENTICATING, Authenticated User
*Jan 14 11:01:14.896:Vi3 CHAP:O SUCCESS id 2 len 4
*Jan 14 11:01:14.896:Vi3 MLP:Request add link to bundle
*Jan 14 11:01:14.896:Vi3 PPP:Phase is VIRTUALIZED
*Jan 14 11:01:14.896:Vi3 MLP:Adding link to bundle
*Jan 14 11:01:14.896:Vi3 MLP:Requested bundle vaccess creation
*Jan 14 11:01:14.896:Vi3 MLP:Determine clone source for SSS
*Jan 14 11:01:14.896:Vi3 MLP:Link is Virtual-Access, clone from Virtual-Template 1
*Jan 14 11:01:14.897:Vi3 MLP:Determine clone source for SSS
*Jan 14 11:01:14.897:Vi3 MLP:Link is Virtual-Access, clone from Virtual-Template 1
*Jan 14 11:01:14.897:%LINK-3-UPDOWN:Interface Virtual-Access3, changed state to up
*Jan 14 11:01:14.897:Vi3 MLP:SSS connect, bundle interface Vi4
*Jan 14 11:01:14.897:PPP:Alloc Context [2A970D9898]
*Jan 14 11:01:14.897:ppp14 PPP:Phase is ESTABLISHING
*Jan 14 11:01:14.897:Vi4 MLP:Changing bundle bandwidth from 100000 to 10000
*Jan 14 11:01:14.897:Vi4 MLP:Ready to finish adding link Vi3 to bundle
*Jan 14 11:01:14.897:Vi3 MLP:Computed frag size 37492 exceeds MTU, changed to 1488
*Jan 14 11:01:14.897:Vi4 MLP:Update bundle bandwidth 10000 set 10000
*Jan 14 11:01:14.897:Vi3 MLP:Change transmit status from Init to Enabled, transmit links 1
*Jan 14 11:01:14.897:Vi4 MLP:Added first link Vi3 to bundle user@cisco.com
*Jan 14 11:01:14.898:Vi3 MLP:Updating bundle's PPP handle[0x5900000E] in SSS context
*Jan 14 11:01:14.898:%LINEPROTO-5-UPDOWN:Line protocol on Interface Virtual-Access3, changed state to up
*Jan 14 11:01:14.898:Vi4 MLP:Received segment updated message for bundle
*Jan 14 11:01:14.915:%LINK-3-UPDOWN:Interface Virtual-Access4, changed state to up
*Jan 14 11:01:14.915:Vi4 PPP:Force LCP OPEN on MLP Bundle
*Jan 14 11:01:14.915:Vi3 PPP:Queue IPCP code[1] id[1]
*Jan 14 11:01:14.915:Vi4 PPP:Phase is UP
*Jan 14 11:01:14.915:Vi4 IPCP:プロトコルが設定され、CPの状態が開始されます[初期]
*Jan 14 11:01:14.915:Vi4 IPCP:Event[OPEN] State[Initial to Starting]
*Jan 14 11:01:14.915:Vi4 IPCP:O CONFREQ [Starting] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.10 (0x03060A0A0A0A)
*Jan 14 11:01:14.915:Vi4 IPCP:Event[UP] State[Starting to REQsent]
*Jan 14 11:01:14.915:Vi3 PPP:Process pending ncp packets
*Jan 14 11:01:14.915:Vi3 IPCP:Redirect packet to Vi4
*Jan 14 11:01:14.915:Vi4 IPCP:I CONFREQ [REQsent] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 0.0.0.0 (0x030600000000)
*Jan 14 11:01:14.915:Vi4 IPCP AUTHOR:終了です。Her address 0.0.0.0, we want 0.0.0.0
*Jan 14 11:01:14.915:Vi4 IPCP:Pool returned 10.10.10.18
*Jan 14 11:01:14.915:Vi4 IPCP:O CONFNAK [REQsent] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.18 (0x03060A0A0A12)
*Jan 14 11:01:14.915:Vi4 IPCP:Event[Receive ConfReq-] State[REQsent to REQsent]
*Jan 14 11:01:14.915:Vi4 IPCP:I CONFACK [REQsent] id 1 len 10
*Jan 14 11:01:14.915:Vi4 IPCP: Address 10.10.10.10 (0x03060A0A0A0A)
*Jan 14 11:01:14.915:Vi4 IPCP:Event[Receive ConfAck] State[REQsent to ACKrcvd]
*Jan 14 11:01:14.916:%LINEPROTO-5-UPDOWN:Line protocol on Interface Virtual-Access4, changed state to up
*Jan 14 11:01:14.936:Vi4 IPCP:I CONFREQ [ACKrcvd] id 2 len 10
*Jan 14 11:01:14.936:Vi4 IPCP: Address 10.10.10.18 (0x03060A0A0A12)
*Jan 14 11:01:14.936:Vi4 IPCP:O CONFACK [ACKrcvd] id 2 len 10
*Jan 14 11:01:14.936:Vi4 IPCP: Address 10.10.10.18 (0x03060A0A0A12)
*Jan 14 11:01:14.936:Vi4 IPCP:Event[Receive ConfReq+] State[ACKrcvd to Open]
*Jan 14 11:01:14.965:Vi4 IPCP:State is Open
*Jan 14 11:01:14.965:Vi4 Added to neighbor route AVL tree:topoid 0, address 10.10.10.18
*Jan 14 11:01:14.965:Vi4 IPCP:Install route to 10.10.10.18
LNS#show ppp all
Interface/ID OPEN+ Nego* Fail- Stage Peer Address Peer Name
— — — —
Vi4 IPCP+ LocalT 10.10.10.18 user@cisco.com
Vi3 LCP+ CHAP+ LocalT 10.10.10.18 user@cisco.com
LNS#show ppp multilink
Virtual-Access4
Bundle name:user@cisco.com
Remote Username:user@cisco.com
Remote Endpoint Discriminator:[1] user@cisco.com
Local Username:LNS
Local Endpoint Discriminator:[1] user@cisco.com
Bundle up for 00:00:10, total bandwidth 10000, load 1/255
Receive buffer limit 12192 bytes, frag timeout 15 ms
Using relaxed lost fragment detection algorithm.
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x0 received sequence, 0x3 sent sequence
Member links:1 (max 255, min not set)
LAC:Vi3 (192.168.1.1), since 00:00:10, 37500 weight, 1488 frag size, unsequenced
No inactive multilink interfaces