Exemple de configuration de client LAN à LAN et EzVPN sur PIX avec accès client VPN à un routeur concentrateur à l'aide des profils ISAKMP

Options de téléchargement

  • PDF     (266.9 KB)
    Consulter à l'aide d'Adobe Reader sur un grand nombre d'appareils
  • ePub     (176.1 KB)
    Consulter à l’aide de différentes applications sur iPhone, iPad, Android ou Windows Phone
  • Mobi (Kindle)     (219.3 KB)
    Consulter sur un appareil Kindle ou à l’aide d’une application Kindle sur plusieurs appareils
Mis à jour:16 octobre 2008
ID du document:48301

Langage exempt de préjugés

Dans le cadre de la documentation associée à ce produit, nous nous efforçons d’utiliser un langage exempt de préjugés. Dans cet ensemble de documents, le langage exempt de discrimination renvoie à une langue qui exclut la discrimination en fonction de l’âge, des handicaps, du genre, de l’appartenance raciale de l’identité ethnique, de l’orientation sexuelle, de la situation socio-économique et de l’intersectionnalité. Des exceptions peuvent s’appliquer dans les documents si le langage est codé en dur dans les interfaces utilisateurs du produit logiciel, si le langage utilisé est basé sur la documentation RFP ou si le langage utilisé provient d’un produit tiers référencé. Découvrez comment Cisco utilise le langage inclusif.

À propos de cette traduction

Cisco a traduit ce document en traduction automatisée vérifiée par une personne dans le cadre d’un service mondial permettant à nos utilisateurs d’obtenir le contenu d’assistance dans leur propre langue. Il convient cependant de noter que même la meilleure traduction automatisée ne sera pas aussi précise que celle fournie par un traducteur professionnel.

Introduction

Ce document fournit un exemple de configuration pour la configuration des tunnels IPsec utilisant des profils ISAKMP sur un routeur concentrateur avec deux sites distants PIX. Un site distant PIX se compose de LAN à LAN et l'autre de la configuration du mode EzVPN Remote Access. Le routeur concentrateur est configuré pour l'authentification locale pour les tunnels EzVPN et l'authentification RADIUS pour le client VPN logiciel.

Conditions préalables

Conditions requises

Aucune spécification déterminée n'est requise pour ce document.

Components Used

Les informations contenues dans ce document sont basées sur les versions de matériel et de logiciel suivantes :

  • Cisco Secure PIX Firewall Appliance 501 qui exécute la version 6.3(3)

  • Routeur Cisco 1750 qui exécute le logiciel Cisco IOS® Version 12.3.9a

  • Cisco Secure PIX Firewall Appliance 506 qui exécute la version 6.3(3)

  • Client VPN Cisco qui exécute 4.0 (Rel) (authentification utilisateur à l'aide du serveur RADIUS)

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Pour plus d'informations sur les conventions utilisées dans ce document, reportez-vous à Conventions relatives aux conseils techniques Cisco.

Configuration

Cette section vous fournit des informations pour configurer les fonctionnalités décrites dans ce document.

Remarque : utilisez l'outil de recherche de commandes (clients enregistrés uniquement) pour trouver des informations supplémentaires sur les commandes utilisées dans ce document.

Diagramme du réseau

Ce document utilise la configuration réseau suivante :

isakmp-new.gif

Configurations

Ce document utilise les configurations suivantes :

Routeur concentrateur VPN 1750 
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname VPN1750

!--- Local authentication username and password, for EzVPN Client.


username jerry password 0 wells123
username cisco password 0 letmein

!--- Enable AAA.

aaa new-model
!
!


!--- Default local login.

aaa authentication login default local


!--- RADIUS authentication for VPN Client.

aaa authentication login userauth group radius local


!--- Local authentication for EzVPN Client.

aaa authentication login EZVPN local
aaa authorization exec default local


!--- Local group authorization for VPN Client.

aaa authorization network groupauthor local


!--- Local authorization for EzVPN Client.

aaa authorization network EZVPN local
aaa session-id common
ip subnet-zero
!
!
ip domain name cisco.com
!
ip cef
ip audit po max-events 100


!--- Keyring specification for Phase 1 authentication.

crypto keyring vpn
pre-shared-key address 172.18.124.196 key cisco123
!


!--- Specify ISAKMP policy.

crypto isakmp policy 20
encr 3des
hash md5
authentication pre-share
group 2
!


!--- EzVPN Client configuration that specifies the group, key and IP pool to use.

crypto isakmp client configuration group polo
key mark123
pool ezpool
!


!--- VPN Client configuration that specifies the group, key and IP pool to use.

crypto isakmp client configuration group tennis
key matchpoint
domain cisco.com
pool vpnpool


!--- ISAKMP profile specification for LAN-to-LAN. 

crypto isakmp profile l2lvpn
keyring vpn
match identity address 172.18.124.196 255.255.255.255


!--- ISAKMP profile specification for EzVPN Client.

crypto isakmp profile ezvpnprofile
match identity group polo
client authentication list EZVPN
isakmp authorization list EZVPN
client configuration address respond


!--- ISAKMP profile specification for software VPN Client.

crypto isakmp profile softclient
match identity group tennis
client authentication list userauth
isakmp authorization list groupauthor
client configuration address respond
!
!


!--- Set tranform-set.

crypto ipsec transform-set pix501 esp-3des esp-sha-hmac
crypto ipsec transform-set vpnclient esp-3des esp-sha-hmac
crypto ipsec transform-set ezvpn esp-3des esp-md5-hmac
!


!--- Specify crypto map set and ISAKMP profile for VPN Client.

crypto dynamic-map rtpmap 10
set transform-set vpnclient
set isakmp-profile softclient


!--- Specify crypto map set and ISAKMP profile for EzVPN Client.

crypto dynamic-map rtpmap 20
set transform-set ezvpn
set isakmp-profile ezvpnprofile
!
!
crypto map rtp 5 ipsec-isakmp dynamic rtpmap


!--- Specify crypto map set and ISAKMP profile for LAN-to-LAN.

crypto map rtp 10 ipsec-isakmp
set peer 172.18.124.196
set transform-set pix501
set isakmp-profile l2lvpn
match address 101
!
!
!
interface Ethernet0
ip address 192.168.40.1 255.255.255.0
!
interface FastEthernet0
ip address 172.18.124.195 255.255.255.0
speed auto


!--- Apply crypto map on the outside interface.

crypto map rtp
!


!--- VPN Client pool addresses.

ip local pool vpnpool 10.50.50.1 10.50.50.10


!--- EzVPN Client pool addresses.

ip local pool ezpool 172.25.70.1 172.25.70.10
ip classless
ip route 0.0.0.0 0.0.0.0 172.18.124.1
!


!--- Encryption access-list applied to the crypto map.

access-list 101 permit ip 192.168.40.0 0.0.0.255 192.168.10.0 0.0.0.255
!


!--- Define ACS server for VPN Client user authentication.

radius-server host 192.168.40.5 auth-port 1645 acct-port 1646 key cisco123
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
!
end

PIX-501 - LAN à LAN 
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname PIX-501
domain-name cisco.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names


!--- Encryption access-list for interesting traffic to be encrypted.

access-list 101 permit ip 192.168.10.0 255.255.255.0 192.168.40.0 255.255.255.0


!--- NAT 0 access-list for encryption traffic to bypass NAT process.

access-list nonat permit ip 192.168.10.0 255.255.255.0 192.168.40.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 172.18.124.196 255.255.255.0
ip address inside 192.168.10.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface


!--- Bypass NAT for IPsec traffic.

nat (inside) 0 access-list nonat
nat (inside) 1 192.168.10.0 255.255.255.0 0 0
route outside 0.0.0.0 0.0.0.0 172.18.124.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
floodguard enable


!--- This command avoids applied ACLs or conduits on encrypted packets.

sysopt connection permit-ipsec


!--- Configuration of IPsec Phase 2.

crypto ipsec transform-set fox esp-3des esp-sha-hmac
crypto map fox 10 ipsec-isakmp
crypto map fox 10 match address 101
crypto map fox 10 set peer 172.18.124.195
crypto map fox 10 set transform-set fox
crypto map fox interface outside


!--- Configuration of IPsec Phase 1.

isakmp enable outside


!--- IKE pre-shared key used by peers to authenticate.

isakmp key ******** address 172.18.124.195 netmask 255.255.255.255
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:9e09996cdf390036841e71da006ba1f1
: end

PIX-506-B - Client EzVPN 
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname PIX-506-B
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500


!--- Define IP addresses for the PIX's inside and outside interfaces.

ip address outside 172.18.124.197 255.255.255.0
ip address inside 192.168.30.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.168.30.0 255.255.255.0 0 0
route outside 0.0.0.0 0.0.0.0 172.18.124.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set tiger esp-3des esp-md5-hmac
telnet timeout 5
ssh timeout 5
console timeout 0


!--- Define the EzVPN server IP address.

vpnclient server 172.18.124.195


!--- Specify the mode to be used (client-mode or Network Extension Mode).

vpnclient mode client-mode


!--- Define EzVPN connection parameters.

vpnclient vpngroup polo password ********
vpnclient username jerry password ********


!--- Enable VPN Client on the PIX.

vpnclient enable
terminal width 80
Cryptochecksum:1bb41de13c5e15537a50cb1f39f131b9
: end

Configuration du client VPN

Complétez ces étapes pour configurer le client VPN.

  1. Lancez le client VPN et créez une nouvelle connexion avec les paramètres d'entrée de connexion requis.

    isakmp-2.gif

  2. Une fois l'entrée de connexion créée, cliquez sur Connect et authentifiez avec les paramètres utilisateur configurés sur le serveur RADIUS.

    isakmp-3.gif

Vérification

Cette section présente des informations que vous pouvez utiliser pour vous assurer que votre configuration fonctionne correctement. Référez-vous à Dépannage de la sécurité IP - Compréhension et utilisation des commandes de débogage pour plus de vérification/dépannage. Si vous rencontrez des problèmes ou des erreurs de client VPN, reportez-vous à l'outil de recherche d'erreurs de l'interface utilisateur graphique du client VPN.

Certaines commandes show sont prises en charge par l'Output Interpreter Tool (clients enregistrés uniquement), qui vous permet de voir une analyse de la sortie de la commande show.

  • show crypto isakmp profile - Affiche tous les profils ISAKMP et leurs configurations sur le routeur.

  • show crypto isakmp key : affiche toutes les touches et leurs clés pré-partagées. Utilisez cette commande pour vérifier la configuration de votre crypto keyring sur le routeur.

  • debug crypto ipsec - Affiche des informations sur les négociations de SA IPsec sur le routeur.

  • debug crypto isakmp - Affiche la SA ISAKMP qui est créée et les attributs IPsec qui sont négociés. Lors de la négociation ISAKMP SA, le PIX peut rejeter plusieurs propositions comme « non acceptables » avant qu'une proposition ne soit acceptée. Une fois l'association de sécurité ISAKMP acceptée, les attributs IPsec sont négociés.

Débogues LAN à LAN sur le routeur concentrateur VPN 1750 à l'aide de debug crypto isakmp et debug crypto ipsec 

May 11 20:44:51.370: ISAKMP (0:0): received packet 
                              from 172.18.124.196 dport 500 sport 500 Global 
                              (N) NEW SA
May 11 20:44:51.370: ISAKMP: local port 500, remote port 500
May 11 20:44:51.370: ISAKMP: insert sa successfully sa = 81789610
May 11 20:44:51.374: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
May 11 20:44:51.374: ISAKMP (0:1): Old State = IKE_READY New State = IKE_R_MM1

May 11 20:44:51.374: ISAKMP (0:1): processing SA payload. message ID = 0
May 11 20:44:51.374: ISAKMP: Looking for a matching key for 172.18.124.196 
                             in default
May 11 20:44:51.374: ISAKMP: Looking for a matching key for 172.18.124.196 
                             in vpn : success
May 11 20:44:51.374: ISAKMP (0:1): found peer pre-shared key matching 
                            172.18.124.196
May 11 20:44:51.378: ISAKMP (0:1) local preshared key found
May 11 20:44:51.378: ISAKMP : Scanning profiles for xauth ... l2lvpn ezvpnprofile
May 11 20:44:51.378: ISAKMP (0:1) Authentication by xauth preshared
May 11 20:44:51.378: ISAKMP (0:1): Checking ISAKMP transform 1 against 
                             priority 20 policy
May 11 20:44:51.378: ISAKMP: encryption 3DES-CBC
May 11 20:44:51.378: ISAKMP: hash MD5
May 11 20:44:51.378: ISAKMP: default group 2
May 11 20:44:51.378: ISAKMP: auth pre-share
May 11 20:44:51.378: ISAKMP: life type in seconds
May 11 20:44:51.378: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
May 11 20:44:51.382: ISAKMP (0:1): atts are acceptable. Next payload is 0
   
!--- Phase 1 proposal accepted.

May 11 20:44:51.598: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, 
                                  IKE_PROCESS_MAIN_MODE
May 11 20:44:51.598: ISAKMP (0:1): Old State = IKE_R_MM1 New State = IKE_R_MM1

May 11 20:44:51.602: ISAKMP (0:1): sending packet to 172.18.124.196 
                                  my_port 500 peer_port 500 (R) MM_SA_SETUP
May 11 20:44:51.602: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
May 11 20:44:51.602: ISAKMP (0:1): Old State = IKE_R_MM1 New State = IKE_R_MM2

May 11 20:44:52.130: ISAKMP (0:1): received packet from 172.18.124.196 
                                   dport 500 sport 500 Global (R) MM_SA_SETUP
May 11 20:44:52.130: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
May 11 20:44:52.130: ISAKMP (0:1): Old State = IKE_R_MM2 New State = IKE_R_MM3

......

May 11 20:44:52.954: ISAKMP (0:1): processing ID payload. message ID = 0
May 11 20:44:52.954: ISAKMP (0:1): ID payload
next-payload : 8
type : 1
address : 172.18.124.196
protocol : 17
port : 500
length : 12
May 11 20:44:52.958: ISAKMP (0:1): peer matches l2lvpn profile 

!--- ISAKMP profile is matched in the router for LAN-to-LAN configuration.

May 11 20:44:52.958: ISAKMP: Looking for a matching key for 172.18.124.196
                            in default
May 11 20:44:52.958: ISAKMP: Looking for a matching key for 172.18.124.196 
                             in vpn : success
May 11 20:44:52.958: ISAKMP (0:1): Found ADDRESS key in keyring vpn
May 11 20:44:52.958: ISAKMP (0:1): processing HASH payload. message ID = 0
May 11 20:44:52.958: ISAKMP (0:1): SA authentication status: authenticated
  
!--- Security Associations are authenticated between the peers.

May 11 20:44:52.994: ISAKMP (0:1): Old State = IKE_P1_COMPLETE 
                                   New State = IKE_P1_COMPLETE

!--- Phase 1 negotiations completed.


....


May 11 20:44:53.002: ISAKMP (0:1): Checking IPSec proposal 1
May 11 20:44:53.002: ISAKMP: transform 1, ESP_3DES
May 11 20:44:53.002: ISAKMP: attributes in transform:
May 11 20:44:53.002: ISAKMP: encaps is 1 (Tunnel)
May 11 20:44:53.002: ISAKMP: SA life type in seconds
May 11 20:44:53.002: ISAKMP: SA life duration (basic) of 28800
May 11 20:44:53.002: ISAKMP: SA life type in kilobytes
May 11 20:44:53.002: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
May 11 20:44:53.002: ISAKMP: authenticator is HMAC-SHA
May 11 20:44:53.006: ISAKMP (0:1): atts are acceptable. 

!--- Phase 2 proposal accepted.

May 11 20:44:53.006: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 172.18.124.195, remote= 172.18.124.196,
local_proxy= 192.168.40.0/255.255.255.0/0/0 (type=4),
remote_proxy= 192.168.10.0/255.255.255.0/0/0 (type=4), 
 
!--- Encryption access-list verification process.
 
protocol= ESP, transform= esp-3des esp-sha-hmac (Tunnel),
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2
...


May 11 20:44:53.282: IPSEC(create_sa): sa created,
(sa) sa_dest= 172.18.124.195, sa_prot= 50,
sa_spi= 0xFBFA852C(4227499308),
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2000
May 11 20:44:53.282: IPSEC(create_sa): sa created,
(sa) sa_dest= 172.18.124.196, sa_prot= 50,
sa_spi= 0x79EFEFCE(2045767630),
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2001  

!--- SAs are created with connection IDs.

May 11 20:44:53.290: ISAKMP (0:1): received packet from 172.18.124.196 
                                  dport 500 sport 500 Global (R) QM_IDLE  

!--- Tunnel has been established.

May 11 20:44:53.294: ISAKMP (0:1): deleting node 156512779 
                               error FALSE reason "quick mode done (await)"
May 11 20:44:53.294: ISAKMP (0:1): Node 156512779, Input = 
                                 IKE_MESG_FROM_PEER, IKE_QM_EXCH
May 11 20:44:53.294: ISAKMP (0:1): Old State = IKE_QM_R_QM2 
                                 New State = IKE_QM_PHASE2_COMPLETE 

!--- Phase 2 negotiations complete.

Débogues EzVPN Client Connection utilisant debug crypto isakmp et debug crypto ipsec 

May 11 20:55:47.266: ISAKMP (0:0): received packet from 172.18.124.197 
                                   dport 500 sport 500 Global (N) NEW SA
May 11 20:55:47.266: ISAKMP: local port 500, remote port 500
May 11 20:55:47.270: ISAKMP: insert sa successfully sa = 81797590
May 11 20:55:47.270: ISAKMP (0:2): processing SA payload. message ID = 0
May 11 20:55:47.270: ISAKMP (0:2): processing ID payload. message ID = 0
May 11 20:55:47.274: ISAKMP (0:2): ID payload
next-payload : 13
type : 11
group id : polo
protocol : 17
port : 0
length : 12
May 11 20:55:47.274: ISAKMP (0:2): peer matches ezvpnprofile profile
  
!--- Profile match for EzVPN Client connection.

May 11 20:55:47.274: ISAKMP: Looking for a matching key for 172.18.124.197 in default
May 11 20:55:47.274: ISAKMP: Looking for a matching key for 172.18.124.197 in vpn
May 11 20:55:47.274: ISAKMP: Created a peer struct for 172.18.124.197, peer port 500
May 11 20:55:47.274: ISAKMP: Locking peer struct 0x81791484, IKE 
                            refcount 1 for crypto_ikmp_config_initialize_sa
...


May 11 20:55:47.282: ISAKMP (0:2): Checking ISAKMP transform 1 against 
                                   priority 20 policy  

!--- ISAKMP policies are checked.

May 11 20:55:47.282: ISAKMP: encryption AES-CBC
May 11 20:55:47.282: ISAKMP: keylength of 256
May 11 20:55:47.282: ISAKMP: hash SHA
May 11 20:55:47.282: ISAKMP: default group 2
May 11 20:55:47.282: ISAKMP: auth XAUTHInitPreShared
May 11 20:55:47.282: ISAKMP: life type in seconds
May 11 20:55:47.282: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
May 11 20:55:47.282: ISAKMP (0:2): Encryption algorithm offered does 
                                   not match policy!
May 11 20:55:47.286: ISAKMP (0:2): atts are not acceptable. Next payload is 3
...

May 11 20:55:47.306: ISAKMP (0:2): Checking ISAKMP transform 8 against 
                                  priority 20 policy
May 11 20:55:47.306: ISAKMP: encryption 3DES-CBC
May 11 20:55:47.306: ISAKMP: hash MD5
May 11 20:55:47.306: ISAKMP: default group 2
May 11 20:55:47.306: ISAKMP: auth XAUTHInitPreShared
May 11 20:55:47.306: ISAKMP: life type in seconds
May 11 20:55:47.310: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
May 11 20:55:47.310: ISAKMP (0:2): atts are acceptable. Next payload is 3  

!--- Phase 1 attributes are validated.

May 11 20:55:47.530: ISAKMP (0:2): processing KE payload. message ID = 0
May 11 20:55:47.798: ISAKMP (0:2): processing NONCE payload. message ID = 0
May 11 20:55:47.802: ISAKMP (0:2): vendor ID is NAT-T v3
May 11 20:55:47.802: ISAKMP (0:2): vendor ID is NAT-T v2
May 11 20:55:47.802: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
May 11 20:55:47.802: ISAKMP (0:2): Old State = IKE_READY New State = 
                                   IKE_R_AM_AAA_AWAIT

May 11 20:55:47.806: ISAKMP: got callback 1
May 11 20:55:47.810: ISAKMP (0:2): SKEYID state generated
May 11 20:55:47.810: ISAKMP (0:2): constructed NAT-T vendor-03 ID
May 11 20:55:47.810: ISAKMP (0:2): SA is doing pre-shared key authentication 
                                  plus XAUTH using id type ID_IPV4_ADDR
May 11 20:55:47.814: ISAKMP (0:2): ID payload
next-payload : 10
type : 1
address : 172.18.124.195
protocol : 17
port : 0
length : 12
May 11 20:55:47.814: ISAKMP (2): Total payload length: 12
May 11 20:55:47.814: ISAKMP (0:2): sending packet to 172.18.124.197 
                                my_port 500 peer_port 500 (R) AG_INIT_EXCH
May 11 20:55:47.814: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY
May 11 20:55:47.818: ISAKMP (0:2): Old State = IKE_R_AM_AAA_AWAIT 
                                   New State = IKE_R_AM2

May 11 20:55:49.114: ISAKMP (0:2): received packet from 172.18.124.197 
                                  dport 500 sport 500 Global (R) AG_INIT_EXCH
May 11 20:55:49.114: ISAKMP:received payload type 20
May 11 20:55:49.118: ISAKMP:received payload type 20
May 11 20:55:49.118: ISAKMP (0:2): processing HASH payload. message ID = 0
May 11 20:55:49.118: ISAKMP (0:2): processing NOTIFY INITIAL_CONTACT protocol 1
spi 0, message ID = 0, sa = 81797590
May 11 20:55:49.118: ISAKMP (0:2): SA authentication status: authenticated  

!--- Phase 1 has been authenticated.

May 11 20:55:49.118: ISAKMP (0:2): Process initial contact,
bring down existing phase 1 and 2 SA's with local 172.ication status: authenticated
May 11 20:55:49.122: ISAKMP (0:2): SA has been authenticated with 172.18.124.197
May 11 20:55:49.122: ISAKMP: Trying to insert a peer 
                     172.18.124.195/172.18.124.197/500/, and inserted successfully.
May 11 20:55:49.126: ISAKMP: set new node 1554218001 to CONF_XAUTH 

!--- User authentication phase starts.

May 11 20:55:49.126: ISAKMP (0:2): sending packet to 172.18.124.197 my_port 
                                  500 peer_port 500 (R) QM_IDLE
May 11 20:55:49.126: ISAKMP (0:2): purging node 155421800118.124.195 remote 
                                  172.18.124.197 remote port 500
May 11 20:55:49.130: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
May 11 20:55:49.130: ISAKMP (0:2): Old State = IKE_R_AM2 New State = 
                                   IKE_P1_COMPLETE

May 11 20:55:49.130: ISAKMP (0:2): Need XAUTH
May 11 20:55:49.130: ISAKMP (0:2): FSM action returned error: 4
May 11 20:55:49.134: ISAKMP (0:2): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
May 11 20:55:49.134: ISAKMP (0:2): Old State = IKE_P1_COMPLETE 
                                 New State = IKE_XAUTH_AAA_START_LOGIN_AWAIT

May 11 20:55:49.134: ISAKMP: got callback 1
May 11 20:55:49.134: ISAKMP: set new node -1233989434 to CONF_XAUTH
May 11 20:55:49.134: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2 

!--- Username request.

May 11 20:55:49.134: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2 

!--- Password request.

May 11 20:55:49.138: ISAKMP (0:2): initiating peer config to 
                                  172.18.124.197. ID = -1233989434
May 11 20:55:49.138: ISAKMP (0:2): sending packet to 172.18.124.197 
                                my_port 500 peer_port 500 (R) CONF_XAUTH
...

May 11 20:55:51.278: ISAKMP: got callback 1
May 11 20:55:51.278: ISAKMP (0:2): attributes sent in message:
May 11 20:55:51.278: Address: 240.2.112.2
May 11 20:55:51.282: ISAKMP (0:2): allocating address 172.25.70.6 

!--- IP address assigned to EzVPN Client from the address pool.

May 11 20:55:51.282: ISAKMP: Sending private address: 172.25.70.6
May 11 20:55:51.286: ISAKMP: Sending APPLICATION_VERSION string: 
                          Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.3(9a), 
                  RELEASE SOFTWARE (fc4)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 23-Jul-04 02:20 by kellythw
May 11 20:55:51.286: ISAKMP (0:2): responding to peer config from 
                                172.18.124.197. ID = -591421152
May 11 20:55:51.290: ISAKMP (0:2): sending packet to 172.18.124.197 
                              my_port 500 peer_port 500 (R) CONF_ADDR
May 11 20:55:51.290: ISAKMP (0:2): deleting node -591421152 error FALSE reason ""
May 11 20:55:51.290: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR
May 11 20:55:51.290: ISAKMP (0:2): Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT 
                                  New State = IKE_P1_COMPLETE

May 11 20:55:51.294: ISAKMP (0:2): Input = IKE_MESG_INTERNAL, 
                                   IKE_PHASE1_COMPLETE
May 11 20:55:51.294: ISAKMP (0:2): Old State = IKE_P1_COMPLETE 
                                  New State = IKE_P1_COMPLETE
May 11 20:55:53.102: ISAKMP (0:2): received packet from 172.18.124.197 
                               dport 500 sport 500 Global (R) QM_IDLE
May 11 20:55:53.102: ISAKMP: set new node -183955662 to QM_IDLE
...


May 11 20:55:53.178: ISAKMP (0:2): IPSec policy invalidated proposal
May 11 20:55:53.178: ISAKMP (0:2): Checking IPSec proposal 8
May 11 20:55:53.178: ISAKMP: transform 1, ESP_3DES
May 11 20:55:53.178: ISAKMP: attributes in transform:
May 11 20:55:53.178: ISAKMP: encaps is 1 (Tunnel)
May 11 20:55:53.178: ISAKMP: SA life type in seconds
May 11 20:55:53.182: ISAKMP: SA life duration (basic) of 28800
May 11 20:55:53.182: ISAKMP: SA life type in kilobytes
May 11 20:55:53.182: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
May 11 20:55:53.182: ISAKMP: authenticator is HMAC-MD5
May 11 20:55:53.182: ISAKMP (0:2): atts are acceptable.  

!--- Proposals are validated.

May 11 20:55:53.182: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 172.18.124.195, remote= 172.18.124.197,
local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
remote_proxy= 172.25.70.6/255.255.255.255/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac (Tunnel),
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2
...

local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
remote_proxy= 172.25.70.6/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac (Tunnel),
lifedur= 28800s and 4608000kb,
spi= 0x866452A1(2254721697), conn_id= 2002, keysize= 0, flags= 0x2
May 11 20:55:53.458: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 172.18.124.195, remote= 172.18.124.197,
local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
remote_proxy= 172.25.70.6/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac (Tunnel),
lifedur= 28800s and 4608000kb,
spi= 0xCA8A5934(3398064436), conn_id= 2003, keysize= 0, flags= 0xA
May 11 20:55:53.458: IPSEC(kei_proxy): head = rtp, map->ivrf = , kei->ivrf =
May 11 20:55:53.458: IPSEC(kei_proxy): head = rtp, map->ivrf = , kei->ivrf =
May 11 20:55:53.462: IPSEC(kei_proxy): head = rtp, map->ivrf = , kei->ivrf =
May 11 20:55:53.462: IPSEC(add mtree): src 172.18.124.195, dest 172.25.70.6, 
dest_port 0

May 11 20:55:53.462: IPSEC(create_sa): sa created,
(sa) sa_dest= 172.18.124.195, sa_prot= 50,
sa_spi= 0x866452A1(2254721697),
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2002
May 11 20:55:53.462: IPSEC(create_sa): sa created,
(sa) sa_dest= 172.18.124.197, sa_prot= 50,
sa_spi= 0xCA8A5934(3398064436),
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2003  

!--- Security Association Connection IDs.

May 11 20:55:54.442: ISAKMP (0:2): received packet from 172.18.124.197 
                                 dport 500 sport 500 Global (R) QM_IDLE
May 11 20:55:54.446: ISAKMP (0:2): deleting node -183955662 error FALSE 
                                  reason "quick mode done (await)"
May 11 20:55:54.446: ISAKMP (0:2): Node -183955662, Input = 
                                  IKE_MESG_FROM_PEER, IKE_QM_EXCH
May 11 20:55:54.446: ISAKMP (0:2): Old State = IKE_QM_R_QM2 New State = 
                                 IKE_QM_PHASE2_COMPLETE
May 11 20:55:54.446: IPSEC(key_engine): got a queue event...
May 11 20:55:54.446: IPSEC(key_engine_enable_outbound): 
                             rec'd enable notify from ISAKMP
May 11 20:55:54.446: IPSEC(key_engine_enable_outbound): 
                           enable SA with spi 3398064436/50 for 172.18.124.197
May 11 20:55:57.450: ISAKMP (0:2): received packet from 
                            172.18.124.197 dport 500 sport 500 Global (R) QM_IDLE
May 11 20:55:57.450: ISAKMP: set new node -1115155724 to QM_IDLE
May 11 20:55:57.454: ISAKMP (0:2): processing HASH payload. 
                             message ID = -1115155724
May 11 20:55:57.458: ISAKMP (0:2): processing SA payload. 
                           message ID = -1115155724
May 11 20:55:57.458: ISAKMP (0:2): Checking IPSec proposal 1
May 11 20:55:57.458: ISAKMP: transform 1, ESP_AES
May 11 20:55:57.458: ISAKMP: attributes in transform:
May 11 20:55:57.458: ISAKMP: encaps is 1 (Tunnel)
May 11 20:55:57.458: ISAKMP: SA life type in seconds
May 11 20:55:57.458: ISAKMP: SA life duration (basic) of 28800
May 11 20:55:57.458: ISAKMP: SA life type in kilobytes
May 11 20:55:57.458: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
May 11 20:55:57.458: ISAKMP: authenticator is HMAC-SHA
May 11 20:55:57.458: ISAKMP: key length is 256
May 11 20:55:57.462: ISAKMP (0:2): atts are acceptable.
May 11 20:55:57.462: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 172.18.124.195, remote= 172.18.124.197,
local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
remote_proxy= 172.18.124.197/255.255.255.255/0/0 (type=1),
protocol= ESP, transform= esp-aes 256 esp-sha-hmac (Tunnel),
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x2
...

May 11 20:55:58.362: ISAKMP (0:2): sending packet to 172.18.124.197 
                                 my_port 500 peer_port 500 (R) QM_IDLE  

!--- Confirmation of tunnel establisment.

May 11 20:55:58.362: ISAKMP (0:2): Node -1115155724, Input = 
                                 IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
May 11 20:55:59.438: ISAKMP (0:2): received packet from 172.18.124.197 
                                  dport 500 sport 500 Global (R) QM_IDLE
May 11 20:55:59.438: ISAKMP (0:2): deleting node -1115155724 error 
                                FALSE reason "quick mode done (await)"
May 11 20:55:59.442: ISAKMP (0:2): Node -1115155724, Input = 
                                 IKE_MESG_FROM_PEER, IKE_QM_EXCH
May 11 20:55:59.442: ISAKMP (0:2): Old State = IKE_QM_R_QM2 
                                  New State = IKE_QM_PHASE2_COMPLETE

Débogues du client VPN sur PIX End à l'aide de debug crypto isakmp et debug crypto ipsec 

May 11 21:16:52.154: ISAKMP (0:0): received packet from 172.18.173.80 dport 500 
sport 500 Global (N) NEW SA

May 11 21:16:52.154: ISAKMP: local port 500, remote port 500

May 11 21:16:52.158: ISAKMP: insert sa successfully sa = 8179D054

May 11 21:16:52.158: ISAKMP (0:3): processing SA payload. message ID = 0

May 11 21:16:52.158: ISAKMP (0:3): processing ID payload. message ID = 0

May 11 21:16:52.158: ISAKMP (0:3): ID payload

next-payload : 13

type : 11

group id : tennis
protocol : 17
port : 500
length : 14
May 11 21:16:52.158: ISAKMP (0:3): peer matches softclient profile  

!--- ISAKMP profile match for VPN Software Clients.

May 11 21:16:52.158: ISAKMP: Looking for a matching key for 172.18.173.80
                             in default
May 11 21:16:52.158: ISAKMP: Looking for a matching key for 172.18.173.80 in vpn
May 11 21:16:52.158: ISAKMP: Created a peer struct for 172.18.173.80, peer 
                             port 500
May 11 21:16:52.162: ISAKMP: Locking peer struct 0x81791484, IKE refcount
                            1 for crypto_ikmp_config_initialize_sa
May 11 21:16:52.162: ISAKMP (0:3): Setting client config settings 81EEB340
May 11 21:16:52.162: ISAKMP (0:3): (Re)Setting client xauth list and state
May 11 21:16:52.162: ISAKMP (0:3): processing vendor id payload
May 11 21:16:52.162: ISAKMP (0:3): vendor ID seems Unity/DPD but major
                                   215 mismatch
May 11 21:16:52.162: ISAKMP (0:3): vendor ID is XAUTH
May 11 21:16:52.162: ISAKMP (0:3): processing vendor id payload
May 11 21:16:52.162: ISAKMP (0:3): vendor ID is DPD
May 11 21:16:52.162: ISAKMP (0:3): processing vendor id payload
May 11 21:16:52.166: ISAKMP (0:3): vendor ID seems Unity/DPD but major 123 mismatch
May 11 21:16:52.166: ISAKMP (0:3): vendor ID is NAT-T v2
May 11 21:16:52.166: ISAKMP (0:3): processing vendor id payload
May 11 21:16:52.166: ISAKMP (0:3): vendor ID seems Unity/DPD but major 194 mismatch
May 11 21:16:52.166: ISAKMP (0:3): processing vendor id payload
May 11 21:16:52.166: ISAKMP (0:3): vendor ID is Unity
May 11 21:16:52.166: ISAKMP (0:3) Authentication by xauth preshared
May 11 21:16:52.166: ISAKMP (0:3): Checking ISAKMP transform 1 against 
                                   priority 20 policy  

!--- ISAKMP policy that matches against configured policy.

May 11 21:16:52.166: ISAKMP: encryption AES-CBC
May 11 21:16:52.170: ISAKMP: hash SHA
May 11 21:16:52.170: ISAKMP: default group 2
May 11 21:16:52.170: ISAKMP: auth XAUTHInitPreShared
May 11 21:16:52.170: ISAKMP: life type in seconds
May 11 21:16:52.170: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
May 11 21:16:52.170: ISAKMP: keylength of 256
May 11 21:16:52.170: ISAKMP (0:3): Encryption algorithm offered does not
                                   match policy!
May 11 21:16:52.170: ISAKMP (0:3): atts are not acceptable. Next payload is 3
....
May 11 21:16:52.198: ISAKMP (0:3): Checking ISAKMP transform 10 against
                                   priority 20 policy
May 11 21:16:52.198: ISAKMP: encryption 3DES-CBC
May 11 21:16:52.202: ISAKMP: hash MD5
May 11 21:16:52.202: ISAKMP: default group 2
May 11 21:16:52.202: ISAKMP: auth XAUTHInitPreShared
May 11 21:16:52.202: ISAKMP: life type in seconds
May 11 21:16:52.202: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
May 11 21:16:52.202: ISAKMP (0:3): atts are acceptable. Next payload is 3
May 11 21:16:52.418: ISAKMP (0:3): processing KE payload. message ID = 0
May 11 21:16:52.686: ISAKMP (0:3): processing NONCE payload. message ID = 0
May 11 21:16:52.690: ISAKMP (0:3): vendor ID is NAT-T v2
May 11 21:16:52.690: ISAKMP (0:3): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
May 11 21:16:52.690: ISAKMP (0:3): Old State = IKE_READY New State = 
                                   IKE_R_AM_AAA_AWAIT
May 11 21:16:52.694: ISAKMP: got callback 1
May 11 21:16:52.698: ISAKMP (0:3): SKEYID state generated
May 11 21:16:52.698: ISAKMP (0:3): constructed NAT-T vendor-02 ID
May 11 21:16:52.702: ISAKMP (0:3): SA is doing pre-shared key authentication
                                  plus XAUTH using id type ID_IPV4_ADDR
May 11 21:16:52.702: ISAKMP (0:3): ID payload
next-payload : 10
type : 1
address : 172.18.124.195
protocol : 17
port : 0
length : 12
May 11 21:16:52.702: ISAKMP (3): Total payload length: 12
May 11 21:16:52.702: ISAKMP (0:3): sending packet to 172.18.173.80 my_port
                                   500 peer_port 500 (R) AG_INIT_EXCH
May 11 21:16:52.706: ISAKMP (0:3): Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY
May 11 21:16:52.706: ISAKMP (0:3): Old State = IKE_R_AM_AAA_AWAIT
                                    New State = IKE_R_AM2
May 11 21:16:52.746: ISAKMP (0:3): received packet from 172.18.173.80 dport
                                   500 sport 500 Global (R) AG_INIT_EXCH
May 11 21:16:52.750: ISAKMP (0:3): processing HASH payload. message ID = 0
May 11 21:16:52.750: ISAKMP (0:3): processing NOTIFY INITIAL_CONTACT protocol 1
spi 0, message ID = 0, sa = 8179D054
May 11 21:16:52.750: ISAKMP (0:3): SA authentication status: authenticated  

!--- Phase 1 SAs are authenticated.

May 11 21:16:52.750: ISAKMP (0:3): Process initial contact,
bring down existing phase 1 and 2 SA's with local 172.18.124.195 
 remote 172.18.173.80 remote port 500
May 11 21:16:52.750: ISAKMP (0:3): returning IP addr to the address pool
May 11 21:16:52.754: ISAKMP:received payload type 20
May 11 21:16:52.754: ISAKMP:received payload type 20
May 11 21:16:52.754: ISAKMP (0:3): SA authentication status:
authenticated
May 11 21:16:52.754: ISAKMP (0:3): SA has been authenticated with 172.18.173.80
May 11 21:16:52.754: ISAKMP: Trying to insert a peer 
172.18.124.195/172.18.173.80/500/, and inserted successfully.
May 11 21:16:52.758: IPSEC(key_engine): got a queue event...
May 11 21:16:52.758: ISAKMP: set new node -1991824466 to CONF_XAUTH 

!--- User Authentication phase starts.

May 11 21:16:52.758: ISAKMP (0:3): sending packet to 172.18.173.80 
my_port 500 peer_port 500 (R) QM_IDLE
May 11 21:16:52.762: ISAKMP (0:3): purging node -1991824466
May 11 21:16:52.762: ISAKMP: Sending phase 1 responder lifetime 86400
May 11 21:16:52.762: ISAKMP (0:3): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
May 11 21:16:52.762: ISAKMP (0:3): Old State = IKE_R_AM2 New State = 
IKE_P1_COMPLETE
May 11 21:16:52.762: ISAKMP (0:3): Need XAUTH
May 11 21:16:52.762: ISAKMP (0:3): FSM action returned error: 4
May 11 21:16:52.766: ISAKMP (0:3): Input = IKE_MESG_INTERNAL, 
IKE_PHASE1_COMPLETE
May 11 21:16:52.766: ISAKMP (0:3): Old State = IKE_P1_COMPLETE 
New State = IKE_XAUTH_AAA_START_LOGIN_AWAIT
May 11 21:16:52.766: ISAKMP: got callback 1
May 11 21:16:52.766: ISAKMP: set new node -1773462433 to CONF_XAUTH
May 11 21:16:52.766: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2 

!--- Requests user name.

May 11 21:16:52.770: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2 

!--- Requests user password.

May 11 21:16:52.770: ISAKMP (0:3): initiating peer config to 172.18.173.80. 
ID = -1773462433
May 11 21:16:52.770: ISAKMP (0:3): sending packet to 172.18.173.80 my_port 
500 peer_port 500 (R) CONF_XAUTH
May 11 21:16:52.770: ISAKMP (0:3): Input = IKE_MESG_FROM_AAA, IKE_AAA_START_LOGIN
...
May 11 21:17:00.350: ISAKMP (0:3): Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
May 11 21:17:00.350: ISAKMP (0:3): Old State = IKE_P1_COMPLETE New State = 
IKE_CONFIG_AUTHOR_AAA_AWAIT
May 11 21:17:00.434: ISAKMP: got callback 1
May 11 21:17:00.438: ISAKMP (0:3): attributes sent in message:
May 11 21:17:00.438: Address: 0.2.0.0
May 11 21:17:00.438: ISAKMP (0:3): allocating address 10.50.50.2  

!--- Allocates the IP address for software VPN Client from the client IP pool.

May 11 21:17:00.438: ISAKMP: Sending private address: 10.50.50.2
May 11 21:17:00.442: ISAKMP: Sending ADDRESS_EXPIRY seconds left to 
use the address: 86391
May 11 21:17:00.442: ISAKMP: Sending APPLICATION_VERSION string: Cisco 
Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.3(9a), 
RELEASE SOFTWARE (fc4)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 23-Jul-04 02:20 by kellythw
May 11 21:17:00.442: ISAKMP (0/3): Unknown Attr: UNKNOWN (0x7008)
May 11 21:17:00.446: ISAKMP (0/3): Unknown Attr: UNKNOWN (0x700A)
May 11 21:17:00.446: ISAKMP (0/3): Unknown Attr: UNKNOWN (0x7005)
May 11 21:17:00.446: ISAKMP (0:3): responding to peer config from 
172.18.173.80. ID = 1330918554
May 11 21:17:00.450: ISAKMP (0:3): sending packet to 172.18.173.80 
my_port 500 peer_port 500 (R) CONF_ADDR
May 11 21:17:00.450: ISAKMP (0:3): deleting node 1330918554 
error FALSE reason ""
May 11 21:17:00.450: ISAKMP (0:3): Input = IKE_MESG_FROM_AAA, 
IKE_AAA_GROUP_ATTR
May 11 21:17:00.450: ISAKMP (0:3): Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT 
New State = IKE_P1_COMPLETE  
May 11 21:17:00.454: ISAKMP (0:3): Input = IKE_MESG_INTERNAL, 
IKE_PHASE1_COMPLETE
May 11 21:17:00.454: ISAKMP (0:3): Old State = IKE_P1_COMPLETE 
New State = IKE_P1_COMPLETE
...
May 11 21:17:01.474: ISAKMP (0:3): Creating IPSec SAs 

!--- Creation of IPsec Security Associations.

May 11 21:17:01.474: inbound SA from 172.18.173.80 to 172.18.124.195 
(f/i) 0/ 0 (proxy 10.50.50.2 to 0.0.0.0)
May 11 21:17:01.474: has spi 0x1B139B2F and conn_id 2000 and flags 2
May 11 21:17:01.474: lifetime of 2147483 seconds
May 11 21:17:01.474: has client flags 0x0
May 11 21:17:01.474: outbound SA from 172.18.124.195 to 172.18.173.80 
(f/i) 0/ 0 (proxy 0.0.0.0 to 10.50.50.2 )
May 11 21:17:01.474: has spi -895677582 and conn_id 2001 and flags A
May 11 21:17:01.474: lifetime of 2147483 seconds
May 11 21:17:01.474: has client flags 0x0
May 11 21:17:01.478: ISAKMP (0:3): sending packet to 172.18.173.80 
my_port 500 peer_port 500 (R) QM_IDLE
May 11 21:17:01.478: ISAKMP (0:3): Node 896912581, Input = 
IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
May 11 21:17:01.478: ISAKMP (0:3): Old State = IKE_QM_SPI_STARVE 
New State = IKE_QM_R_QM2
May 11 21:17:01.482: IPSEC(key_engine): got a queue event...
May 11 21:17:01.482: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 172.18.124.195, remote= 172.18.173.80,
local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
remote_proxy= 10.50.50.2/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac (Tunnel),
lifedur= 2147483s and 0kb,
spi= 0x1B139B2F(454269743), conn_id= 2000, keysize= 0, flags= 0x2
May 11 21:17:01.482: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 172.18.124.195, remote= 172.18.173.80,
local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
remote_proxy= 10.50.50.2/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac (Tunnel),
lifedur= 2147483s and 0kb,
spi= 0xCA9D0B72(3399289714), conn_id= 2001, keysize= 0, flags= 0xA
May 11 21:17:01.486: IPSEC(kei_proxy): head = rtp, map->ivrf = , kei->ivrf =
May 11 21:17:01.486: IPSEC(kei_proxy): head = rtp, map->ivrf = , kei->ivrf =
May 11 21:17:01.486: IPSEC(add mtree): src 172.18.124.195, 
dest 10.50.50.2, dest_port 0
May 11 21:17:01.486: IPSEC(create_sa): sa created,
(sa) sa_dest= 172.18.124.195, sa_prot= 50,
sa_spi= 0x1B139B2F(454269743),
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2000
May 11 21:17:01.490: IPSEC(create_sa): sa created,
(sa) sa_dest= 172.18.173.80, sa_prot= 50,
sa_spi= 0xCA9D0B72(3399289714),
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2001
  
!--- Security Association connection IDs created.

May 11 21:17:01.742: ISAKMP (0:3): received packet from 172.18.173.80 
dport 500 sport 500 Global (R) QM_IDLE 

!--- Successful tunnel established.

May 11 21:17:01.746: ISAKMP (0:3): deleting node 896912581 error 
FALSE reason "quick mode done (await)"
May 11 21:17:01.746: ISAKMP (0:3): Node 896912581, Input = 
IKE_MESG_FROM_PEER, IKE_QM_EXCH
May 11 21:17:01.746: ISAKMP (0:3): Old State = IKE_QM_R_QM2 
New State = IKE_QM_PHASE2_COMPLETE
May 11 21:17:01.746: IPSEC(key_engine): got a queue event...
May 11 21:17:01.746: IPSEC(key_engine_enable_outbound): rec'd 
enable notify from ISAKMP
May 11 21:17:01.746: IPSEC(key_engine_enable_outbound): enable SA 
with spi 3399289714/50 for 172.18.173.80

Débogues sur PIX 501 (connexion LAN à LAN) 

PIX-501#
ISAKMP (0): beginning Main Mode exchange

crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.196
 spt:500 dpt:500
OAK_MM exchange
ISAKMP (0): processing SA payload. message ID = 0

ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy  

!--- ISAKMP attributes check in process.

ISAKMP: encryption 3DES-CBC 
ISAKMP: hash MD5
ISAKMP: default group 2
ISAKMP: auth pre-share
ISAKMP: life type in seconds
ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR
return status is IKMP_NO_ERROR
crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.196
 spt:500 dpt:500
OAK_MM exchange
ISAKMP (0): processing KE payload. message ID = 0

ISAKMP (0): processing NONCE payload. message ID = 0

ISAKMP (0): processing vendor id payload

ISAKMP (0): processing vendor id payload

ISAKMP (0): remote peer supports dead peer detection

ISAKMP (0): processing vendor id payload

ISAKMP (0): speaking to another IOS box!

ISAKMP (0): processing vendor id payload

ISAKMP (0): received xauth v6 vendor id

ISAKMP (0): ID payload
next-payload : 8
type : 1
protocol : 17
port : 500
length : 8
ISAKMP (0): Total payload length: 12
return status is IKMP_NO_ERROR
crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.196 
spt:500 dpt:500
OAK_MM exchange
ISAKMP (0): processing ID payload. message ID = 0
ISAKMP (0): processing HASH payload. message ID = 0
ISAKMP (0): SA has been authenticated 

ISAKMP (0): beginning Quick Mode exchange, M-ID of 156512779:954320bIPSEC
(key_engine): got a queue event...
IPSEC(spi_response): getting spi 0x79efefce(2045767630) for SA
from 172.18.124.195 to 172.18.124.196 for prot 3

return status is IKMP_NO_ERROR
ISAKMP (0): sending INITIAL_CONTACT notify
ISAKMP (0): sending NOTIFY message 24578 protocol 1
VPN Peer: ISAKMP: Added new peer: ip:172.18.124.195/500 Total VPN Peers:1
VPN Peer: ISAKMP: Peer ip:172.18.124.195/500 Ref cnt incremented to:1 Total 
VPN Peers:1
crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.196 
spt:500 dpt:500
OAK_QM exchange
oakley_process_quick_mode:
OAK_QM_IDLE
ISAKMP (0): processing SA payload. message ID = 156512779

ISAKMP : Checking IPSec proposal 1

ISAKMP: transform 1, ESP_3DES
ISAKMP: attributes in transform:
ISAKMP: encaps is 1
ISAKMP: SA life type in seconds
ISAKMP: SA life duration (basic) of 28800
ISAKMP: SA life type in kilobytes
ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
ISAKMP: authenticator is HMAC-SHA
ISAKMP (0): atts are acceptable. 

!--- Phase 1 attributes are negotiated.


IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) dest= 172.18.124.195, src= 172.18.124.196,
dest_proxy= 192.168.40.0/255.255.255.0/0/0 (type=4),
src_proxy= 192.168.10.0/255.255.255.0/0/0 (type=4),
protocol= ESP, transform= esp-3des esp-sha-hmac ,
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4

ISAKMP (0): processing NONCE payload. message ID = 156512779

ISAKMP (0): processing ID payload. message ID = 156512779
ISAKMP (0): processing ID payload. message ID = 156512779
ISAKMP (0): processing NOTIFY payload 24576 protocol 3
spi 4227499308, message ID = 156512779
ISAKMP (0): processing responder lifetime
ISAKMP (0): responder lifetime of 3600s
ISAKMP (0): Creating IPSec SAs
inbound SA from 172.18.124.195 to 172.18.124.196 (proxy 192.168.40.0 
to 192.168.10.0)
has spi 2045767630 and conn_id 1 and flags 4
lifetime of 3600 seconds
lifetime of 4608000 kilobytes
outbound SA from 172.18.124.196 to 172.18.124.195 (proxy 
192.168.10.0 to 192.168.40.0)
has spi 4227499308 and conn_id 2 and flags 4
lifetime of 3600 seconds
lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event...
IPSEC(initialize_sas): ,
(key eng. msg.) dest= 172.18.124.196, src= 172.18.124.195,
dest_proxy= 192.168.10.0/255.255.255.0/0/0 (type=4),
src_proxy= 192.168.40.0/255.255.255.0/0/0 (type=4),
protocol= ESP, transform= esp-3des esp-sha-hmac ,
lifedur= 3600s and 4608000kb,
spi= 0x79efefce(2045767630), conn_id= 1, keysize= 0, flags= 0x4
IPSEC(initialize_sas): ,
(key eng. msg.) src= 172.18.124.196, dest= 172.18.124.195,
src_proxy= 192.168.10.0/255.255.255.0/0/0 (type=4),
dest_proxy= 192.168.40.0/255.255.255.0/0/0 (type=4),
protocol= ESP, transform= esp-3des esp-sha-hmac ,
lifedur= 3600s and 4608000kb,
spi= 0xfbfa852c(4227499308), conn_id= 2, keysize= 0, flags= 0x4 

!--- Phase 2 tunnel establishment.

Débogues sur PIX-506-B (connexion client EzVPN) 

ISAKMP (0): ID payload
next-payload : 13
type : 11
protocol : 17
port : 0
length : 8
ISAKMP (0): Total payload length: 12
ISAKMP (0:0): sending NAT-T vendor ID - rev 2 & 3
ISAKMP (0): beginning Aggressive Mode exchange
crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.197 
spt:500 dpt:500
OAK_AG exchange
ISAKMP (0): processing SA payload. message ID = 0

ISAKMP (0): Checking ISAKMP transform 1 against priority 65001 policy
ISAKMP: encryption 3DES-CBC
ISAKMP: hash MD5
ISAKMP: default group 2
ISAKMP: extended auth pre-share (init)
ISAKMP: life type in seconds
ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
ISAKMP (0): atts are not acceptable. Next payload is 0
...
ISAKMP (0): Checking ISAKMP transform 1 against priority 65008 policy
ISAKMP: encryption 3DES-CBC
ISAKMP: hash MD5
ISAKMP: default group 2
ISAKMP: extended auth pre-share (init)
ISAKMP: life type in seconds
ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
ISAKMP (0): atts are acceptable. Next payload is 0  

!--- Phase 1 attributes are accepted.

ISAKMP (0): processing vendor id payload

ISAKMP (0): processing vendor id payload

ISAKMP (0): remote peer supports dead peer detection

ISAKMP (0): processing vendor id payload

ISAKMP (0): speaking to another IOS box!

ISAKMP (0): processing vendor id payload

ISAKMP (0): received xauth v6 vendor id

ISAKMP (0): processing vendor id payload

ISAKMP (0:0): vendor ID is NAT-T
ISAKMP (0): processing KE payload. message ID = 0

ISAKMP (0): processing ID payload. message ID = 0
ISAKMP (0): processing NONCE payload. message ID = 0

ISAKMP (0): processing HASH payload. message ID = 0
ISAKMP (0:0): Detected NAT-D payload
ISAKMP (0:0): recalc my hash for NAT-D
ISAKMP (0:0): NAT match MINE hash
ISAKMP (0:0): Detected NAT-D payload
ISAKMP (0:0): recalc his hash for NAT-D
ISAKMP (0:0): NAT match HIS hash
ISAKMP (0): SA has been authenticated 

!--- SAs have been authenticated.

crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.197 
spt:500 dpt:500
ISAKMP (0): processing NOTIFY payload 24576 protocol 1
spi 0, message ID = 1554218001
ISAKMP (0): processing responder lifetime
ISAKMP (0): phase 1 responder lifetime of 86400s
ISAKMP (0): not overriding 86400s
return status is IKMP_NO_ERR_NO_TRANS
crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.197 
spt:500 dpt:500
ISAKMP_TRANSACTION exchange
ISAKMP (0:0): processing transaction payload from 172.18.124.195. 
message ID = 15250780
ISAKMP: Config payload CFG_REQUEST
ISAKMP (0:0): checking request: 

!--- Extended authentication process check.

ISAKMP: attribute XAUTH_USER_NAME (16521)
ISAKMP: attribute XAUTH_USER_PASSWORD (16522)
ISAKMP (0:0): responding to peer config from 172.18.124.195. ID = 3060977862
return status is IKMP_NO_ERROR
crypto_isakmp_process_block:src:172.18.124.195, dest:172.18.124.197 
spt:500 dpt:500
ISAKMP_TRANSACTION exchange
ISAKMP (0:0): processing transaction payload from 172.18.124.195. 
message ID = 15250780
ISAKMP: Config payload CFG_SET
ISAKMP (0:0): checking SET:
ISAKMP: XAUTH_STATUS XAUTH-OK 

!--- Extended authentication checked.

ISAKMP (0:0): attributes sent in message: 
Status: 1
return status is IKMP_NO_ERROR
ISAKMP : attributes being requested
INTERNAL_IPV_ADDRESS
ALT_DEF_DOMAIN
INTERNAL_IPV_NBNS
INTERNAL_IPV_DNS
ALT_SPLIT_INCLUDE
ALT_SPLITDNS_NAME
ALT_PFS
ALT_CFG_SEC_UNIT
ALT_CFG_USER_AUTH
ALT_CFG_IDLE_TIME
ALT_CFG_IP_TEL
ALT_CFG_AUTH_SRVNAME
ALT_CFG_AUTH_SRVPORT
ALT_CFG_AUTH_SRVSEC
ALT_BACKUP_SERVERS

...


ISAKMP : Checking IPSec proposal 1
ISAKMP: transform 1, ESP_3DES
ISAKMP: attributes in transform:
ISAKMP: encaps is 1
ISAKMP: SA life type in seconds
ISAKMP: SA life duration (basic) of 28800
ISAKMP: SA life type in kilobytes
ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
ISAKMP: authenticator is HMAC-MD5
ISAKMP (0): atts are acceptable.  

!--- IPsec proposal accepted.


IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) dest= 172.18.124.195, src= 172.18.124.197,
dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
src_proxy= 172.25.70.6/255.255.255.255/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4

ISAKMP (0): processing NONCE payload. message ID = 4111011634
ISAKMP (0): processing ID payload. message ID = 4111011634
ISAKMP (0): processing ID payload. message ID = 4111011634
ISAKMP (0): processing NOTIFY payload 24576 protocol 3
spi 2254721697, message ID = 4111011634
ISAKMP (0): processing responder lifetime
ISAKMP (0): responder lifetime of 3600s
ISAKMP (0): Creating IPSec SAs
inbound SA from 172.18.124.195 to 172.18.124.197 (proxy 0.0.0.0 to 172.25.70.6)
has spi 3398064436 and conn_id 2 and flags 4
lifetime of 3600 seconds
lifetime of 4608000 kilobytes
outbound SA from 172.18.124.197 to 172.18.124.195 (proxy 172.25.70.6 to 0.0.0.0)
has spi 2254721697 and conn_id 1 and flags 4
lifetime of 3600 seconds
lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event...
IPSEC(initialize_sas): ,
(key eng. msg.) dest= 172.18.124.197, src= 172.18.124.195,
dest_proxy= 172.25.70.6/255.255.255.255/0/0 (type=1),
src_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 3600s and 4608000kb,
spi= 0xca8a5934(3398064436), conn_id= 2, keysize= 0, flags= 0x4
IPSEC(initialize_sas): ,
(key eng. msg.) src= 172.18.124.197, dest= 172.18.124.195,
src_proxy= 172.25.70.6/255.255.255.255/0/0 (type=1),
dest_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), 

!--- IPSec SAs created.

protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 3600s and 4608000kb,
spi= 0x866452a1(2254721697), conn_id= 1, keysize= 0, flags= 0x4

Débogues sur le client VPN

Sélectionnez Démarrer > Programmes > Cisco VPN Client > Log Viewer. 

Cisco Systems VPN Client Version 4.0 (Rel)
Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600

1 15:47:01.430 08/19/04 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 172.18.124.195.

2 15:47:01.460 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), 
VID(Nat-T), VID(Frag), VID(Unity)) to 172.18.124.195

3 15:47:01.947 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

4 15:47:01.947 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, VID(Unity), VID(dpd), VID(?), VID(Xauth), 
VID(Nat-T), KE, ID, NON, HASH, NAT-D, NAT-D) from 172.18.124.195

5 15:47:01.947 08/19/04 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer

6 15:47:01.947 08/19/04 Sev=Info/5 IKE/0x63000001
Peer supports DPD

7 15:47:01.947 08/19/04 Sev=Info/5 IKE/0x63000001
Peer supports DWR Code and DWR Text

8 15:47:01.947 08/19/04 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH

9 15:47:01.947 08/19/04 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T

10 15:47:01.977 08/19/04 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful

11 15:47:01.977 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, 
NAT-D, NAT-D, VID(?), VID(Unity)) to 172.18.124.195

12 15:47:01.977 08/19/04 Sev=Info/4 IKE/0x63000082
IKE Port in use - Local Port = 0x01F4, Remote Port = 0x01F4

13 15:47:01.977 08/19/04 Sev=Info/5 IKE/0x63000071
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end is NOT behind a NAT device 

!--- NAT device detection process.


14 15:47:01.986 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

15 15:47:01.986 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) 
from 172.18.124.195

16 15:47:01.986 08/19/04 Sev=Info/5 IKE/0x63000044
RESPONDER-LIFETIME notify has value of 86400 seconds

17 15:47:01.986 08/19/04 Sev=Info/5 IKE/0x63000046
This SA has already been alive for 0 seconds, setting expiry to 86400 
seconds from now

18 15:47:01.996 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

19 15:47:01.996 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 172.18.124.195

20 15:47:02.689 08/19/04 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started

21 15:47:02.689 08/19/04 Sev=Info/4 IPSEC/0x63700014
Deleted all keys

22 15:47:02.689 08/19/04 Sev=Info/6 IPSEC/0x6370002B
Sent 85 packets, 0 were fragmented.

23 15:47:06.044 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 172.18.124.195

24 15:47:06.064 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

25 15:47:06.064 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 172.18.124.195

26 15:47:06.064 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 172.18.124.195

27 15:47:06.103 08/19/04 Sev=Info/5 IKE/0x6300005D
Client sending a firewall request to concentrator

28 15:47:06.103 08/19/04 Sev=Info/5 IKE/0x6300005C
Firewall Policy: Product=Cisco Systems Integrated Client, Capability= 
(Centralized Protection Policy).

29 15:47:06.113 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 172.18.124.195

30 15:47:06.132 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

31 15:47:06.132 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 172.18.124.195

32 15:47:06.132 08/19/04 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.50.50.2 

!--- Assigned IP address for the VPN Client.


33 15:47:06.132 08/19/04 Sev=Info/5 IKE/0xA3000017
MODE_CFG_REPLY: The received (INTERNAL_ADDRESS_EXPIRY) attribute and 
value (842150403) is not supported

34 15:47:06.132 08/19/04 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = cisco.com

35 15:47:06.132 08/19/04 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco 
Internetwork Operating System Software 
IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.3(9a), 
RELEASE SOFTWARE (fc4)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 23-Jul-04 02:20 by kellythw

37 15:47:06.171 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 172.18.124.195

38 15:47:06.444 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

39 15:47:06.454 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID, NOTIFY:STATUS_RESP_LIFETIME
 from 172.18.124.195

40 15:47:06.454 08/19/04 Sev=Info/5 IKE/0x63000044
RESPONDER-LIFETIME notify has value of 3600 seconds

41 15:47:06.454 08/19/04 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 4608000 kb

42 15:47:06.454 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to 172.18.124.195

43 15:47:06.454 08/19/04 Sev=Info/5 IKE/0x63000058
Loading IPsec SA (MsgID=83D109EC OUTBOUND SPI = 0x422186D5 INBOUND 
SPI = 0x5D94CB41)

44 15:47:06.454 08/19/04 Sev=Info/5 IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0x422186D5

45 15:47:06.454 08/19/04 Sev=Info/5 IKE/0x63000026
Loaded INBOUND ESP SPI: 0x5D94CB41

46 15:47:09.307 08/19/04 Sev=Info/4 IPSEC/0x63700014
Deleted all keys

47 15:47:09.307 08/19/04 Sev=Info/4 IPSEC/0x63700010
Created a new key structure

48 15:47:09.307 08/19/04 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0xd5862142 into key list

49 15:47:09.307 08/19/04 Sev=Info/4 IPSEC/0x63700010
Created a new key structure

50 15:47:09.307 08/19/04 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0x41cb945d into key list

51 15:47:09.307 08/19/04 Sev=Info/4 IPSEC/0x6370002E
Assigned VA private interface addr 10.50.50.2

52 15:47:16.568 08/19/04 Sev=Info/6 IKE/0x6300003D
Sending DPD request to 172.18.124.195, seq# = 2346900535

53 15:47:16.568 08/19/04 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to 172.18.124.195

54 15:47:16.578 08/19/04 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 172.18.124.195

55 15:47:16.578 08/19/04 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from 172.18.124.195

56 15:47:16.578 08/19/04 Sev=Info/5 IKE/0x6300003F
Received DPD ACK from 172.18.124.195, seq# received = 2346900536, 
seq# expected = 2346900536

Dépannage

Cette section fournit des informations que vous pouvez utiliser pour dépanner votre configuration.

Dépannage des commandes

Certaines commandes show sont prises en charge par l'Output Interpreter Tool (clients enregistrés uniquement), qui vous permet de voir une analyse de la sortie de la commande show.

Note : Reportez-vous à Informations importantes sur les commandes de débogage avant d'émettre des commandes de débogage.

  • show crypto isakmp sa - Affiche toutes les SA IKE (Internet Key Exchange) actuelles sur un homologue.

    VPN1750#show crypto isakmp sa 
dst             src             state          conn-id slot
172.18.124.195  172.18.173.80  QM_IDLE              3    0

!--- VPN Client.

172.18.124.195  172.18.124.197  QM_IDLE              2    0

!--- EzVPN between hub router and PIX-506-B.

172.18.124.195  172.18.124.196  QM_IDLE              1    0

!--- EzVPN between hub router and PIX-501.

  • show crypto ipsec sa — Affiche les paramètres utilisés par les SA.

    VPN1750#show crypto ipsec sa
	  interface: FastEthernet0
    Crypto map tag: rtp, local addr. 172.18.124.195

   protected vrf:
   local  ident (addr/mask/prot/port): (192.168.40.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
   current_peer: 172.18.124.196:500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 4, #pkts encrypt: 4, #pkts digest 4
    #pkts decaps: 4, #pkts decrypt: 4, #pkts verify 4
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.18.124.195, remote crypto endpt.: 
   172.18.124.196
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
     current outbound spi: DB79E16D

     inbound esp sas:
      spi: 0xAF634F08(2942521096)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2000, flow_id: 1, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4433404/3282)
        IV size: 8 bytes
        replay detection support: Y

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0xDB79E16D(3682197869)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2001, flow_id: 2, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4433404/3282)
        IV size: 8 bytes
        replay detection support: Y

     outbound ah sas:

     outbound pcp sas:

   protected vrf:
   local  ident (addr/mask/prot/port): (172.18.124.195/0.0.0.0/0/0)
   remote ident (addr/mask/prot/port): (50.50.50.7/255.255.255.255/0/0)
   current_peer: 172.18.173.80:500
     PERMIT, flags={}
    #pkts encaps: 6, #pkts encrypt: 6, #pkts digest 6
    #pkts decaps: 47, #pkts decrypt: 47, #pkts verify 47
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.18.124.195, remote crypto endpt.: 
     172.18.173.80
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
     current outbound spi: 72149A7D

     inbound esp sas:
      spi: 0x3467B12A(879210794)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2006, flow_id: 7, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4381078/3577)
        IV size: 8 bytes
        replay detection support: Y

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x72149A7D(1913952893)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2007, flow_id: 8, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4381086/3577)
        IV size: 8 bytes
        replay detection support: Y

     outbound ah sas:

     outbound pcp sas:

   protected vrf:
   local  ident (addr/mask/prot/port): (172.18.124.195/0.0.0.0/0/0)
   remote ident (addr/mask/prot/port): (172.25.70.8/255.255.255.255/0/0)
   current_peer: 172.18.124.197:500
     PERMIT, flags={}
    #pkts encaps: 3, #pkts encrypt: 3, #pkts digest 3
    #pkts decaps: 3, #pkts decrypt: 3, #pkts verify 3
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.18.124.195, remote crypto endpt.: 
    172.18.124.197
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
     current outbound spi: 2DE8E3C9

     inbound esp sas:
      spi: 0xED6381E5(3982721509)
        transform: esp-3des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2002, flow_id: 3, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4561846/3283)
        IV size: 8 bytes
        replay detection support: Y

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x2DE8E3C9(770237385)
        transform: esp-3des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2003, flow_id: 4, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4561846/3281)
        IV size: 8 bytes
        replay detection support: Y

     outbound ah sas:

     outbound pcp sas:

   protected vrf:
   local  ident (addr/mask/prot/port): (172.18.124.195/0.0.0.0/0/0)
   remote ident (addr/mask/prot/port): (172.18.124.197/255.255.255.255/0/0)
   current_peer: 172.18.124.197:500
     PERMIT, flags={}
    #pkts encaps: 0, #pkts encrypt: 0, #pkts digest 0
    #pkts decaps: 0, #pkts decrypt: 0, #pkts verify 0
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.18.124.195, remote crypto endpt.: 
    172.18.124.197
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
     current outbound spi: 87066AED

     inbound esp sas:
      spi: 0x8C8106A4(2357266084)
        transform: esp-3des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2004, flow_id: 5, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4525643/3285)
        IV size: 8 bytes
        replay detection support: Y

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x87066AED(2265344749)
        transform: esp-3des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2005, flow_id: 6, crypto map: rtp
        sa timing: remaining key lifetime (k/sec): (4525643/3285)
        IV size: 8 bytes
        replay detection support: Y

     outbound ah sas:

     outbound pcp sas:

Informations connexes

Historique de révision

Révision Date de publication Commentaires
1.0
16-Oct-2008
Première publication

Ce document vous est-il utile?

FeedbackCommentaires

Contacter Cisco

Ce document s’applique à ces produits