Ce document décrit comment configurer une connexion IPsec entre un routeur et le client Cisco Virtual Private Network (VPN) 4.x avec TACACS+ (Terminal Access Controller Access Control System Plus) pour l'authentification des utilisateurs. Le logiciel Cisco IOS® version 12.2(8)T et ultérieures prend en charge les connexions du client VPN Cisco 4.x. Le client VPN 4.x utilise la stratégie de groupe 2 Diffie-Hellman (D-H). La commande isakmp policy # group 2 permet aux clients 4.x de se connecter.
Ce document montre l'authentification sur le serveur TACACS+ avec autorisation, telles que les affectations WINS (Windows Internet Naming Service) et DNS (Domain Naming Service), effectuées localement par le routeur.
Référez-vous à Configuration de Cisco VPN Client 3.x pour Windows à IOS à l'aide de l'authentification étendue locale afin d'en savoir plus sur le scénario où l'authentification de l'utilisateur se produit localement dans le routeur Cisco IOS.
Référez-vous à Configuration d'IPSec entre un routeur Cisco IOS et un client VPN Cisco 4.x pour Windows utilisant RADIUS pour l'authentification utilisateur afin d'en savoir plus sur le scénario où l'authentification utilisateur se produit en externe avec le protocole RADIUS.
Assurez-vous de répondre à ces exigences avant d'essayer cette configuration :
Pool d'adresses à attribuer pour IPsec
Groupe nommé « vpngroup » avec le mot de passe « cisco123 »
Authentification utilisateur sur un serveur TACACS+
Les informations contenues dans ce document sont basées sur les versions de matériel et de logiciel suivantes :
Client VPN Cisco pour Windows version 4.0.2D (tout client VPN 3.x ou ultérieur doit fonctionner.)
Cisco Secure pour Windows version 3.0 (tout serveur TACACS+ doit fonctionner)
Routeur Cisco IOS 1710 version 12.2(8)T1 chargé avec le jeu de fonctions IPsec
Le résultat de la commande show version sur le routeur est affiché ici.
1710#show version Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(8)T1, RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 30-Mar-02 13:30 by ccai Image text-base: 0x80008108, data-base: 0x80C1E054 ROM: System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1) 1710 uptime is 1 week, 6 days, 22 hours, 30 minutes System returned to ROM by reload System image file is "flash:c1710-k9o3sy-mz.122-8.T1" cisco 1710 (MPC855T) processor (revision 0x200) with 27853K/4915K bytes of memory. Processor board ID JAD052706CX (3234866109), with hardware revision 0000 MPC855T processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 1 FastEthernet/IEEE 802.3 interface(s) 1 Virtual Private Network (VPN) Module(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Pour plus d'informations sur les conventions utilisées dans ce document, reportez-vous à Conventions relatives aux conseils techniques Cisco.
Cette section vous fournit des informations pour configurer les fonctionnalités décrites dans ce document.
Remarque : utilisez l'outil de recherche de commandes (clients enregistrés uniquement) afin de trouver plus d'informations sur les commandes utilisées dans ce document.
Ce document utilise la configuration réseau suivante :
Remarque : les schémas d'adressage IP utilisés dans cette configuration ne sont pas routables légalement sur Internet. Ce sont des adresses RFC 1918 qui ont été utilisées dans un environnement de laboratoire.
Ce document utilise les configurations suivantes :
Routeur Cisco 1710 |
---|
1710#show run Building configuration... Current configuration : 1884 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname 1710 ! !--- Enable authentication, authorization and accounting (AAA) !--- for user authentication and group authorization. aaa new-model ! !--- In order to enable extended authentication (Xauth) for user authentication, !--- enable the aaa authentication commands. !--- The group TACACS+ command specifies TACACS+ user authentication. aaa authentication login userauthen group tacacs+ !--- In order to enable group authorization, !--- enable the aaa authorization commands. aaa authorization network groupauthor local ! ! ip subnet-zero ! ! ! ip audit notify log ip audit po max-events 100 ! !--- Create an Internet Security Association and !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations. crypto isakmp policy 3 encr 3des authentication pre-share group 2 ! !--- Create a group in order to specify the !--- WINS and DNS server addresses to the VPN Client, !--- along with the pre-shared key for authentication. crypto isakmp client configuration group vpngroup key cisco123 dns 10.2.1.10 wins 10.2.1.20 domain cisco.com pool ippool ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set myset esp-3des esp-sha-hmac ! !--- Create a dynamic map, and !--- apply the transform set that was previously created. crypto dynamic-map dynmap 10 set transform-set myset ! !--- Create the actual crypto map, !--- and apply the AAA lists that were created earlier. crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! fax interface-type fax-mail mta receive maximum-recipients 0 ! ! ! !--- Apply the crypto map on the outside interface. interface FastEthernet0 ip address 172.18.124.158 255.255.255.0 crypto map clientmap ! interface Ethernet0 ip address 10.38.50.51 255.255.0.0 ! !--- Create a pool of addresses to be assigned to the VPN Clients. ip local pool ippool 10.1.1.100 10.1.1.200 ip classless ip route 0.0.0.0 0.0.0.0 172.18.124.1 ip route 172.16.124.0 255.255.255.0 10.38.1.1 ip route 10.2.1.0 255.255.255.0 10.38.1.1 ip http server ip pim bidir-enable ! ! ! !--- Specify the IP address of the TACACS+ server, !--- along with the TACACS+ shared secret key. tacacs-server host 172.16.124.96 key cisco123 ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 ! ! end |
Pour configurer le serveur TACACS+, procédez comme suit :
Cliquez sur Ajouter une entrée afin d'ajouter une entrée pour le routeur dans la base de données du serveur TACACS+.
Sur la page Add AAA Client, entrez les informations du routeur comme indiqué dans cette image :
Dans le champ AAA Client Hostname, saisissez un nom pour le routeur.
Dans le champ AAA Client IP Address, saisissez 10.38.50.51.
Dans le champ Key (Clé), saisissez cisco123 comme clé secrète partagée.
Dans la liste déroulante Authentifier à l'aide, sélectionnez TACACS+ (Cisco IOS), puis cliquez sur Envoyer.
Dans le champ User, saisissez le nom d'utilisateur de l'utilisateur VPN dans la base de données Cisco Secure, puis cliquez sur Add/Edit.
Dans cet exemple, le nom d'utilisateur est cisco.
À la page suivante, saisissez et confirmez le mot de passe de l'utilisateur cisco.
Dans cet exemple, le mot de passe est également cisco.
Si vous souhaitez mapper le compte d'utilisateur à un groupe, complétez cette étape maintenant. Lorsque vous avez terminé, cliquez sur Soumettre.
Afin de configurer le client VPN 4.x, procédez comme suit :
Lancez le client VPN, puis cliquez sur Nouveau afin de créer une nouvelle connexion.
La boîte de dialogue VPN Client Create New VPN Connection Entry s'affiche.
Dans la boîte de dialogue Créer une entrée de connexion VPN, saisissez les informations de connexion comme illustré dans cette image :
Dans le champ Connection Entry, saisissez un nom pour la connexion.
Dans les champs Description et Host, saisissez une description et l'adresse IP de l'hôte pour l'entrée de connexion.
Sous l'onglet Authentification, cliquez sur la case d'option Authentification de groupe, puis entrez le nom et le mot de passe de l'utilisateur.
Cliquez sur Enregistrer afin d'enregistrer la connexion.
Dans la fenêtre VPN Client, sélectionnez l'entrée de connexion que vous avez créée, puis cliquez sur Connect afin de vous connecter au routeur.
À mesure que le protocole IPsec négocie, vous êtes invité à saisir un nom d'utilisateur et un mot de passe. Entrez un nom d'utilisateur et un mot de passe.
La fenêtre affiche les messages suivants :
« Négociation des profils de sécurité. »
« Votre lien est désormais sécurisé. »
Afin d'activer la transmission tunnel partagée pour les connexions VPN, assurez-vous de configurer une liste de contrôle d'accès (ACL) sur le routeur. Dans cet exemple, la commande access-list 102 est associée au groupe à des fins de fractionnement en canaux, et le tunnel est formé aux réseaux 10.38.X.X /16 et 10.2.x.x. Le trafic circule non chiffré vers les périphériques qui ne figurent pas dans la liste de contrôle d’accès 102 (par exemple, Internet).
access-list 102 permit ip 10.38.0.0 0.0.255.255 10.1.1.0 0.0.0.255 access-list 102 permit ip 10.2.0.0 0.0.255.255 10.1.1.0 0.0.0.255
Appliquez la liste de contrôle d'accès aux propriétés du groupe.
crypto isakmp client configuration group vpngroup key cisco123 dns 10.2.1.10 wins 10.2.1.20 domain cisco.com pool ippool acl 102
Cette section présente des informations que vous pouvez utiliser pour vous assurer que votre configuration fonctionne correctement.
Certaines commandes show sont prises en charge par l'outil Output Interpreter Tool (clients enregistrés seulement). Cet outil vous permet d'afficher une analyse de la sortie show command.
1710#show crypto isakmp sa dst src state conn-id slot 172.18.124.158 192.168.60.34 QM_IDLE 3 0 1710#show crypto ipsec sa interface: FastEthernet0 Crypto map tag: clientmap, local addr. 172.18.124.158 local ident (addr/mask/prot/port): (172.18.124.158/255.255.255.255/0/0) remote ident (addr/mask/prot/port): (10.1.1.114/255.255.255.255/0/0) current_peer: 192.168.60.34 PERMIT, flags={} #pkts encaps: 0, #pkts encrypt: 0, #pkts digest 0 #pkts decaps: 0, #pkts decrypt: 0, #pkts verify 0 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 172.18.124.158, remote crypto endpt.: 192.168.60.34 path mtu 1500, media mtu 1500 current outbound spi: 8F9BB05F inbound esp sas: spi: 0x61C53A64(1640315492) transform: esp-3des esp-sha-hmac , in use settings ={Tunnel, } slot: 0, conn id: 200, flow_id: 1, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4608000/3294) IV size: 8 bytes replay detection support: Y inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0x8F9BB05F(2409345119) transform: esp-3des esp-sha-hmac , in use settings ={Tunnel, } slot: 0, conn id: 201, flow_id: 2, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4608000/3294) IV size: 8 bytes replay detection support: Y outbound ah sas: outbound pcp sas: local ident (addr/mask/prot/port): (10.38.0.0/255.255.0.0/0/0) remote ident (addr/mask/prot/port): (10.1.1.114/255.255.255.255/0/0) current_peer: 192.168.60.34 PERMIT, flags={} #pkts encaps: 3, #pkts encrypt: 3, #pkts digest 3 #pkts decaps: 3, #pkts decrypt: 3, #pkts verify 3 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 172.18.124.158, remote crypto endpt.: 192.168.60.34 path mtu 1500, media mtu 1500 current outbound spi: 8B57E45E inbound esp sas: spi: 0x89898D1A(2307493146) transform: esp-3des esp-sha-hmac , in use settings ={Tunnel, } slot: 0, conn id: 202, flow_id: 3, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4607999/3452) IV size: 8 bytes replay detection support: Y inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0x8B57E45E(2337793118) transform: esp-3des esp-sha-hmac , in use settings ={Tunnel, } slot: 0, conn id: 203, flow_id: 4, crypto map: clientmap sa timing: remaining key lifetime (k/sec): (4607999/3452) IV size: 8 bytes replay detection support: Y outbound ah sas: outbound pcp sas: 1710#show crypto engine connections active ID Interface IP-Address State Algorithm Encrypt Decrypt 2 FastEthernet0 172.18.124.158 set HMAC_SHA+3DES_56_C 0 0 200 FastEthernet0 172.18.124.158 set HMAC_SHA+3DES_56_C 0 0 201 FastEthernet0 172.18.124.158 set HMAC_SHA+3DES_56_C 0 0 202 FastEthernet0 172.18.124.158 set HMAC_SHA+3DES_56_C 0 3 203 FastEthernet0 172.18.124.158 set HMAC_SHA+3DES_56_C 3 0
Cette section fournit des informations que vous pouvez utiliser pour dépanner votre configuration.
L'Outil Interpréteur de sortie (clients enregistrés uniquement) (OIT) prend en charge certaines commandes show. Employez l'OIT afin d'afficher une analyse de la sortie de la commande show.
Remarque : Consulter les renseignements importants sur les commandes de débogage avant d’utiliser les commandes de débogage.
debug crypto ipsec — Affiche des informations de débogage sur les connexions IPSec.
debug crypto isakmp - Affiche les informations de débogage sur les connexions IPsec et affiche le premier jeu d'attributs qui sont refusés en raison d'incompatibilités aux deux extrémités.
debug crypto engine — Affiche des informations du moteur de chiffrement.
debug aaa authentication - Affiche des informations sur l'authentification AAA/TACACS+.
debug aaa Authorization : affiche des informations sur l'autorisation AAA/TACACS+.
debug tacacs : affiche des informations qui vous permettent de dépanner la communication entre le serveur TACACS+ et le routeur.
1710#show debug General OS: TACACS access control debugging is on AAA Authentication debugging is on AAA Authorization debugging is on Cryptographic Subsystem: Crypto ISAKMP debugging is on Crypto Engine debugging is on Crypto IPSEC debugging is on 1710# 1w6d: ISAKMP (0:0): received packet from 192.168.60.34 (N) NEW SA 1w6d: ISAKMP: local port 500, remote port 500 1w6d: ISAKMP (0:2): (Re)Setting client xauth list userauthen and state 1w6d: ISAKMP: Locking CONFIG struct 0x8158B894 from crypto_ikmp_config_initialize_sa, count 2 1w6d: ISAKMP (0:2): processing SA payload. message ID = 0 1w6d: ISAKMP (0:2): processing ID payload. message ID = 0 1w6d: ISAKMP (0:2): processing vendor id payload 1w6d: ISAKMP (0:2): vendor ID seems Unity/DPD but bad major 1w6d: ISAKMP (0:2): vendor ID is XAUTH 1w6d: ISAKMP (0:2): processing vendor id payload 1w6d: ISAKMP (0:2): vendor ID is DPD 1w6d: ISAKMP (0:2): processing vendor id payload 1w6d: ISAKMP (0:2): vendor ID is Unity 1w6d: ISAKMP (0:2): Checking ISAKMP transform 1 against priority 3 policy 1w6d: ISAKMP: encryption 3DES-CBC 1w6d: ISAKMP: hash SHA 1w6d: ISAKMP: default group 2 1w6d: ISAKMP: auth XAUTHInitPreShared 1w6d: ISAKMP: life type in seconds 1w6d: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B 1w6d: ISAKMP (0:2): atts are acceptable. Next payload is 3 1w6d: CryptoEngine0: generate alg parameter 1w6d: CryptoEngine0: CRYPTO_ISA_DH_CREATE(hw)(ipsec) 1w6d: CRYPTO_ENGINE: Dh phase 1 status: 0 1w6d: ISAKMP (0:2): processing KE payload. message ID = 0 1w6d: CryptoEngine0: generate alg parameter 1w6d: CryptoEngine0: CRYPTO_ISA_DH_SHARE_SECRET(hw)(ipsec) 1w6d: ISAKMP (0:2): processing NONCE payload. message ID = 0 1w6d: ISAKMP (0:2): processing vendor id payload 1w6d: ISAKMP (0:2): processing vendor id payload 1w6d: ISAKMP (0:2): processing vendor id payload 1w6d: AAA: parse name=ISAKMP-ID-AUTH idb type=-1 tty=-1 1w6d: AAA/MEMORY: create_user (0x817F63F4) user='vpngroup' ruser='NULL' ds0=0 port='ISAKMP-ID-AUTH' rem_addr='192.168.60.34' authen_type=NONE service=LOGIN priv=0 initial_task_id='0' 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH Old State = IKE_READY New State = IKE_R_AM_AAA_AWAIT 1w6d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(1472763894): Port='ISAKMP-ID-AUTH' list='groupauthor' service=NET 1w6d: AAA/AUTHOR/CRYPTO AAA: ISAKMP-ID-AUTH(1472763894) user='vpngroup' 1w6d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(1472763894): send AV service=ike 1w6d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(1472763894): send AV protocol=ipsec 1w6d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(1472763894): found list "groupauthor" 1w6d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(1472763894): Method=LOCAL 1w6d: AAA/AUTHOR (1472763894): Post authorization status = PASS_ADD 1w6d: ISAKMP: got callback 1 AAA/AUTHOR/IKE: Processing AV service=ike AAA/AUTHOR/IKE: Processing AV protocol=ipsec AAA/AUTHOR/IKE: Processing AV tunnel-password=cisco123 AAA/AUTHOR/IKE: Processing AV default-domain*cisco.com AAA/AUTHOR/IKE: Processing AV addr-pool*ippool AAA/AUTHOR/IKE: Processing AV key-exchange=ike AAA/AUTHOR/IKE: Processing AV timeout*0 AAA/AUTHOR/IKE: Processing AV idletime*0 AAA/AUTHOR/IKE: Processing AV inacl*102 AAA/AUTHOR/IKE: Processing AV dns-servers*10.1.1.10 0.0.0.0 AAA/AUTHOR/IKE: Processing AV wins-servers*10.1.1.20 0.0.0.0 1w6d: CryptoEngine0: create ISAKMP SKEYID for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_SA_CREATE(hw)(ipsec) 1w6d: ISAKMP (0:2): SKEYID state generated 1w6d: ISAKMP (0:2): SA is doing pre-shared key authentication plux XAUTH using id type ID_IPV4_ADDR 1w6d: ISAKMP (2): ID payload next-payload : 10 type : 1 protocol : 17 port : 500 length : 8 1w6d: ISAKMP (2): Total payload length: 12 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP (0:2): sending packet to 192.168.60.34 (R) AG_INIT_EXCH 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY Old State = IKE_R_AM_AAA_AWAIT New State = IKE_R_AM2 1w6d: AAA/MEMORY: free_user (0x817F63F4) user='vpngroup' ruser='NULL' port='ISAK MP-ID-AUTH' rem_addr='192.168.60.34' authen_type=NONE service=LOGIN priv=0 1w6d: ISAKMP (0:2): received packet from 192.168.60.34 (R) AG_INIT_EXCH 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): processing HASH payload. message ID = 0 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP (0:2): processing NOTIFY INITIAL_CONTACT protocol 1 spi 0, message ID = 0, sa = 81673884 1w6d: ISAKMP (0:2): Process initial contact, bring down existing phase 1 and 2 SA's 1w6d: ISAKMP (0:2): returning IP addr to the address pool: 10.1.1.113 1w6d: ISAKMP (0:2): returning address 10.1.1.113 to pool 1w6d: ISAKMP (0:2): peer does not do paranoid keepalives. 1w6d: ISAKMP (0:2): SA has been authenticated with 192.168.60.34 1w6d: CryptoEngine0: clear dh number for conn id 1 1w6d: CryptoEngine0: CRYPTO_ISA_DH_DELETE(hw)(ipsec) 1w6d: IPSEC(key_engine): got a queue event... 1w6d: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP 1w6d: IPSEC(key_engine_delete_sas): delete all SAs shared with 192.168.60.34 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): sending packet to 192.168.60.34 (R) QM_IDLE 1w6d: ISAKMP (0:2): purging node 1324880791 1w6d: ISAKMP: Sending phase 1 responder lifetime 86400 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH Old State = IKE_R_AM2 New State = IKE_P1_COMPLETE 1w6d: ISAKMP (0:2): Need XAUTH 1w6d: AAA: parse name=ISAKMP idb type=-1 tty=-1 1w6d: AAA/MEMORY: create_user (0x812F79FC) user='NULL' ruser='NULL' ds0=0 port=' ISAKMP' rem_addr='192.168.60.34' authen_type=ASCII service=LOGIN priv=0 initial_task_id='0' 1w6d: ISAKMP (0:2): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE Old State = IKE_P1_COMPLETE New State = IKE_XAUTH_AAA_START_LOGIN_AWAIT 1w6d: AAA/AUTHEN/START (2017610393): port='ISAKMP' list='userauthen' action=LOGIN service=LOGIN 1w6d: AAA/AUTHEN/START (2017610393): found list userauthen 1w6d: AAA/AUTHEN/START (2017610393): Method=tacacs+ (tacacs+) 1w6d: TAC+: send AUTHEN/START packet ver=192 id=2017610393 1w6d: TAC+: Using default tacacs server-group "tacacs+" list. 1w6d: TAC+: Opening TCP/IP to 172.16.124.96/49 timeout=5 1w6d: TAC+: Opened TCP/IP handle 0x8183D638 to 172.16.124.96/49 1w6d: TAC+: 172.16.124.96 (2017610393) AUTHEN/START/LOGIN/ASCII queued 1w6d: TAC+: (2017610393) AUTHEN/START/LOGIN/ASCII processed 1w6d: TAC+: ver=192 id=2017610393 received AUTHEN status = GETUSER 1w6d: AAA/AUTHEN(2017610393): Status=GETUSER 1w6d: ISAKMP: got callback 1 1w6d: ISAKMP/xauth: request attribute XAUTH_TYPE_V2 1w6d: ISAKMP/xauth: request attribute XAUTH_MESSAGE_V2 1w6d: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2 1w6d: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP (0:2): initiating peer config to 192.168.60.34. ID = 1641488057 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): sending packet to 192.168.60.34 (R) CONF_XAUTH 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_START_LOGIN Old State = IKE_XAUTH_AAA_START_LOGIN_AWAIT New State = IKE_XAUTH_REQ_SENT 1w6d: ISAKMP (0:2): received packet from 192.168.60.34 (R) CONF_XAUTH 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): processing transaction payload from 192.168.60.34. message ID = 1641488057 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP: Config payload REPLY 1w6d: ISAKMP/xauth: reply attribute XAUTH_TYPE_V2 unexpected 1w6d: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2 1w6d: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2 1w6d: ISAKMP (0:2): deleting node 1641488057 error FALSE reason "done with xauth request/reply exchange" 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY Old State = IKE_XAUTH_REQ_SENT New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT 1w6d: AAA/AUTHEN/CONT (2017610393): continue_login (user='(undef)') 1w6d: AAA/AUTHEN(2017610393): Status=GETUSER 1w6d: AAA/AUTHEN(2017610393): Method=tacacs+ (tacacs+) 1w6d: TAC+: send AUTHEN/CONT packet id=2017610393 1w6d: TAC+: 172.16.124.96 (2017610393) AUTHEN/CONT queued 1w6d: TAC+: (2017610393) AUTHEN/CONT processed 1w6d: TAC+: ver=192 id=2017610393 received AUTHEN status = GETPASS 1w6d: AAA/AUTHEN(2017610393): Status=GETPASS 1w6d: AAA/AUTHEN/CONT (2017610393): continue_login (user='cisco') 1w6d: AAA/AUTHEN(2017610393): Status=GETPASS 1w6d: AAA/AUTHEN(2017610393): Method=tacacs+ (tacacs+) 1w6d: TAC+: send AUTHEN/CONT packet id=2017610393 1w6d: TAC+: 172.16.124.96 (2017610393) AUTHEN/CONT queued 1w6d: TAC+: (2017610393) AUTHEN/CONT processed 1w6d: TAC+: ver=192 id=2017610393 received AUTHEN status = PASS 1w6d: AAA/AUTHEN(2017610393): Status=PASS 1w6d: ISAKMP: got callback 1 1w6d: TAC+: Closing TCP/IP 0x8183D638 connection to 172.16.124.96/49 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP (0:2): initiating peer config to 192.168.60.34. ID = 1736579999 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): sending packet to 192.168.60.34 (R) CONF_XAUTH 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT New State = IKE_XAUTH_SET_SENT 1w6d: AAA/MEMORY: free_user (0x812F79FC) user='cisco' ruser='NULL' port='ISAKMP' rem_addr='192.168.60.34' authen_type=ASCII service=LOGIN priv=0 1w6d: ISAKMP (0:2): received packet from 192.168.60.34 (R) CONF_XAUTH 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): processing transaction payload from 192.168.60.34. message ID = 1736579999 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP: Config payload ACK 1w6d: ISAKMP (0:2): XAUTH ACK Processed 1w6d: ISAKMP (0:2): deleting node 1736579999 error FALSE reason "done with transaction" 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK Old State = IKE_XAUTH_SET_SENT New State = IKE_P1_COMPLETE 1w6d: ISAKMP (0:2): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE 1w6d: ISAKMP (0:2): received packet from 192.168.60.34 (R) QM_IDLE 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): processing transaction payload from 192.168.60.34. message ID = 398811763 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP: Config payload REQUEST 1w6d: ISAKMP (0:2): checking request: 1w6d: ISAKMP: IP4_ADDRESS 1w6d: ISAKMP: IP4_NETMASK 1w6d: ISAKMP: IP4_DNS 1w6d: ISAKMP: IP4_NBNS 1w6d: ISAKMP: ADDRESS_EXPIRY 1w6d: ISAKMP: APPLICATION_VERSION 1w6d: ISAKMP: UNKNOWN Unknown Attr: 0x7000 1w6d: ISAKMP: UNKNOWN Unknown Attr: 0x7001 1w6d: ISAKMP: DEFAULT_DOMAIN 1w6d: ISAKMP: SPLIT_INCLUDE 1w6d: ISAKMP: UNKNOWN Unknown Attr: 0x7007 1w6d: ISAKMP: UNKNOWN Unknown Attr: 0x7008 1w6d: ISAKMP: UNKNOWN Unknown Attr: 0x7005 1w6d: AAA: parse name=ISAKMP-GROUP-AUTH idb type=-1 tty=-1 1w6d: AAA/MEMORY: create_user (0x812F79FC) user='vpngroup' ruser='NULL' ds0=0 po rt='ISAKMP-GROUP-AUTH' rem_addr='192.168.60.34' authen_type=NONE service=LOGIN pr iv=0 initial_task_id='0' 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST Old State = IKE_P1_COMPLETE New State = IKE_CONFIG_AUTHOR_AAA_AWAIT 1w6d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(1059453615): Port='ISAKMP-GROUP-AUTH' list='groupauthor' service=NET 1w6d: AAA/AUTHOR/CRYPTO AAA: ISAKMP-GROUP-AUTH(1059453615) user='vpngroup' 1w6d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(1059453615): send AV service=ike 1w6d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(1059453615): send AV protocol=ipsec 1w6d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(1059453615): found list "groupauthor" 1w6d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(1059453615): Method=LOCAL 1w6d: AAA/AUTHOR (1059453615): Post authorization status = PASS_ADD 1w6d: ISAKMP: got callback 1 AAA/AUTHOR/IKE: Processing AV service=ike AAA/AUTHOR/IKE: Processing AV protocol=ipsec AAA/AUTHOR/IKE: Processing AV tunnel-password=cisco123 AAA/AUTHOR/IKE: Processing AV default-domain*cisco.com AAA/AUTHOR/IKE: Processing AV addr-pool*ippool AAA/AUTHOR/IKE: Processing AV key-exchange=ike AAA/AUTHOR/IKE: Processing AV timeout*0 AAA/AUTHOR/IKE: Processing AV idletime*0 AAA/AUTHOR/IKE: Processing AV inacl*102 AAA/AUTHOR/IKE: Processing AV dns-servers*10.1.1.10 0.0.0.0 AAA/AUTHOR/IKE: Processing AV wins-servers*10.1.1.20 0.0.0.0 1w6d: ISAKMP (0:2): attributes sent in message: 1w6d: Address: 0.2.0.0 1w6d: ISAKMP (0:2): allocating address 10.1.1.114 1w6d: ISAKMP: Sending private address: 10.1.1.114 1w6d: ISAKMP: Unknown Attr: IP4_NETMASK (0x2) 1w6d: ISAKMP: Sending IP4_DNS server address: 10.1.1.10 1w6d: ISAKMP: Sending IP4_NBNS server address: 10.1.1.20 1w6d: ISAKMP: Sending ADDRESS_EXPIRY seconds left to use the address: 86396 1w6d: ISAKMP: Sending APPLICATION_VERSION string: Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(8)T1, RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 30-Mar-02 13:30 by ccai 1w6d: ISAKMP: Unknown Attr: UNKNOWN (0x7000) 1w6d: ISAKMP: Unknown Attr: UNKNOWN (0x7001) 1w6d: ISAKMP: Sending DEFAULT_DOMAIN default domain name: cisco.com 1w6d: ISAKMP: Sending split include name 102 network 10.38.0.0 mask 255.255.0.0 protocol 0, src port 0, dst port 0 1w6d: ISAKMP: Unknown Attr: UNKNOWN (0x7007) 1w6d: ISAKMP: Unknown Attr: UNKNOWN (0x7008) 1w6d: ISAKMP: Unknown Attr: UNKNOWN (0x7005) 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP (0:2): responding to peer config from 192.168.60.34. ID = 398811763 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): sending packet to 192.168.60.34 (R) CONF_ADDR 1w6d: ISAKMP (0:2): deleting node 398811763 error FALSE reason "" 1w6d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT New State = IKE_P1_COMPLETE 1w6d: AAA/MEMORY: free_user (0x812F79FC) user='vpngroup' ruser='NULL' port='ISAKMP-GROUP-AUTH' rem_addr='192.168.60.34' authen_type=NONE service=LOGIN priv=0 1w6d: ISAKMP (0:2): received packet from 192.168.60.34 (R) QM_IDLE 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT(hw)(ipsec) 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ISAKMP (0:2): processing HASH payload. message ID = 1369459046 1w6d: ISAKMP (0:2): processing SA payload. message ID = 1369459046 1w6d: ISAKMP (0:2): Checking IPSec proposal 1 1w6d: ISAKMP: transform 1, ESP_3DES 1w6d: ISAKMP: attributes in transform: 1w6d: ISAKMP: authenticator is HMAC-MD5 1w6d: ISAKMP: encaps is 1 1w6d: ISAKMP: SA life type in seconds 1w6d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 1w6d: validate proposal 0 1w6d: IPSEC(validate_proposal): transform proposal (prot 3, trans 3, hmac_alg 1) not supported 1w6d: ISAKMP (0:2): atts not acceptable. Next payload is 0 1w6d: ISAKMP (0:2): skipping next ANDed proposal (1) 1w6d: ISAKMP (0:2): Checking IPSec proposal 2 1w6d: ISAKMP: transform 1, ESP_3DES 1w6d: ISAKMP: attributes in transform: 1w6d: ISAKMP: authenticator is HMAC-SHA 1w6d: ISAKMP: encaps is 1 1w6d: ISAKMP: SA life type in seconds 1w6d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 1w6d: validate proposal 0 1w6d: ISAKMP (0:2): atts are acceptable. 1w6d: ISAKMP (0:2): Checking IPSec proposal 2 1w6d: ISAKMP (0:2): transform 1, IPPCP LZS 1w6d: ISAKMP: attributes in transform: 1w6d: ISAKMP: encaps is 1 1w6d: ISAKMP: SA life type in seconds 1w6d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 1w6d: IPSEC(validate_proposal): transform proposal (prot 4, trans 3, hmac_alg 0) not supported 1w6d: ISAKMP (0:2): atts not acceptable. Next payload is 0 1w6d: ISAKMP (0:2): Checking IPSec proposal 3 1w6d: ISAKMP: transform 1, ESP_3DES 1w6d: ISAKMP: attributes in transform: 1w6d: ISAKMP: authenticator is HMAC-MD5 1w6d: ISAKMP: encaps is 1 1w6d: ISAKMP: SA life type in seconds 1w6d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 1w6d: validate proposal 0 1w6d: IPSEC(validate_proposal): transform proposal (prot 3, trans 3, hmac_alg 1) not supported 1w6d: ISAKMP (0:2): atts not acceptable. Next payload is 0 1w6d: ISAKMP (0:2): Checking IPSec proposal 4 1w6d: ISAKMP: transform 1, ESP_3DES 1w6d: ISAKMP: attributes in transform: 1w6d: ISAKMP: authenticator is HMAC-SHA 1w6d: ISAKMP: encaps is 1 1w6d: ISAKMP: SA life type in seconds 1w6d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 1w6d: validate proposal 0 1w6d: ISAKMP (0:2): atts are acceptable. 1w6d: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 172.18.124.158, remote= 192.168.60.34, local_proxy= 172.18.124.158/255.255.255.255/0/0 (type=1), remote_proxy= 10.1.1.114/255.255.255.255/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 1w6d: validate proposal request 0 1w6d: ISAKMP (0:2): processing NONCE payload. message ID = 1369459046 1w6d: ISAKMP (0:2): processing ID payload. message ID = 1369459046 1w6d: ISAKMP (0:2): processing ID payload. message ID = 1369459046 1w6d: ISAKMP (0:2): asking for 1 spis from ipsec 1w6d: ISAKMP (0:2): Node 1369459046, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE 1w6d: IPSEC(key_engine): got a queue event... 1w6d: IPSEC(spi_response): getting spi 1640315492 for SA from 172.18.124.158 to 192.168.60.34 for prot 3 1w6d: ISAKMP: received ke message (2/1) 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT(hw)(ipsec) 1w6d: ISAKMP (0:2): sending packet to 192.168.60.34 (R) QM_IDLE 1w6d: ISAKMP (0:2): Node 1369459046, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 1w6d: ISAKMP (0:2): received packet from 192.168.60.34 (R) QM_IDLE 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT(hw)(ipsec) 1w6d: CryptoEngine0: generate hmac context for conn id 2 1w6d: CryptoEngine0: CRYPTO_ISA_IKE_HMAC(hw)(ipsec) 1w6d: ipsec allocate flow 0 1w6d: ipsec allocate flow 0 1w6d: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE(hw)(ipsec) 1w6d: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE(hw)(ipsec) 1w6d: ISAKMP (0:2): Creating IPSec SAs 1w6d: inbound SA from 192.168.60.34 to 172.18.124.158 (proxy 10.1.1.114 to 172.18.124.158) 1w6d: has spi 0x61C53A64 and conn_id 200 and flags 4 1w6d: lifetime of 2147483 seconds 1w6d: outbound SA from 172.18.124.158 to 192.168.60.34 (proxy 172.18.124.158 to 10.1.1.114 ) 1w6d: has spi -1885622177 and conn_id 201 and flags C 1w6d: lifetime of 2147483 seconds 1w6d: ISAKMP (0:2): deleting node 1369459046 error FALSE reason "quick mode done (await()" 1w6d: ISAKMP (0:2): Node 1369459046, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE 1w6d: IPSEC(key_engine): got a queue event... 1w6d: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 172.18.124.158, remote= 192.168.60.34, local_proxy= 172.18.124.158/0.0.0.0/0/0 (type=1), remote_proxy= 10.1.1.114/0.0.0.0/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 2147483s and 0kb, spi= 0x61C53A64(1640315492), conn_id= 200, keysize= 0, flags= 0x4 1w6d: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 172.18.124.158, remote= 192.168.60.34, local_proxy= 172.18.124.158/0.0.0.0/0/0 (type=1), remote_proxy= 10.1.1.114/0.0.0.0/0/0 (type=1), protocol= ESP, transform= esp-3des esp-sha-hmac , lifedur= 2147483s and 0kb, spi= 0x8F9BB05F(2409345119), conn_id= 201, keysize= 0, flags= 0xC 1w6d: IPSEC(create_sa): sa created, (sa) sa_dest= 172.18.124.158, sa_prot= 50, sa_spi= 0x61C53A64(1640315492), sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 200 1w6d: IPSEC(create_sa): sa created, (sa) sa_dest= 192.168.60.34, sa_prot= 50, sa_spi= 0x8F9BB05F(2409345119), sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 201
Afin d'afficher les journaux, lancez la Visionneuse de journaux sur le client VPN et définissez le filtre sur High pour toutes les classes configurées.
L'exemple de sortie de journal est présenté ici.
1 11:56:06.609 06/05/02 Sev=Info/6 DIALER/0x63300002 Initiating connection. 2 11:56:06.609 06/05/02 Sev=Info/4 CM/0x63100002 Begin connection process 3 11:56:06.609 06/05/02 Sev=Info/4 CM/0x63100004 Establish secure connection using Ethernet 4 11:56:06.609 06/05/02 Sev=Info/4 CM/0x63100026 Attempt connection with server "172.18.124.158" 5 11:56:06.609 06/05/02 Sev=Info/6 IKE/0x6300003B Attempting to establish a connection with 172.18.124.158. 6 11:56:06.669 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID, VID, VID) to 172.18.124.158 7 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x6300002F Received ISAKMP packet: peer = 172.18.124.158 8 11:56:07.250 06/05/02 Sev=Info/4 IKE/0x63000014 RECEIVING <<< ISAKMP OAK AG (SA, VID, VID, VID, VID, KE, ID, NON, HASH) from 172.18.124.158 9 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x63000059 Vendor ID payload = 12F5F28C457168A9702D9FE274CC0100 10 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x63000001 Peer is a Cisco-Unity compliant peer 11 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x63000059 Vendor ID payload = AFCAD71368A1F1C96B8696FC77570100 12 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x63000001 Peer supports DPD 13 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x63000059 Vendor ID payload = 0A0E5F2A15C0B2F2A41B00897B816B3C 14 11:56:07.250 06/05/02 Sev=Info/5 IKE/0x63000059 Vendor ID payload = 09002689DFD6B712 15 11:56:07.280 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT) to 172.18.124.158 16 11:56:07.320 06/05/02 Sev=Info/5 IKE/0x6300002F Received ISAKMP packet: peer = 172.18.124.158 17 11:56:07.320 06/05/02 Sev=Info/4 IKE/0x63000014 RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 172.18.124.158 18 11:56:07.320 06/05/02 Sev=Info/5 IKE/0x63000044 RESPONDER-LIFETIME notify has value of 86400 seconds 19 11:56:07.320 06/05/02 Sev=Info/5 IKE/0x63000046 This SA has already been alive for 1 seconds, setting expiry to 86399 seconds from now 20 11:56:07.561 06/05/02 Sev=Info/5 IKE/0x6300002F Received ISAKMP packet: peer = 172.18.124.158 21 11:56:07.561 06/05/02 Sev=Info/4 IKE/0x63000014 RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 172.18.124.158 22 11:56:07.561 06/05/02 Sev=Info/4 CM/0x63100015 Launch xAuth application 23 11:56:07.571 06/05/02 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 24 11:56:09.734 06/05/02 Sev=Info/4 CM/0x63100017 xAuth application returned 25 11:56:09.734 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 172.18.124.158 26 11:56:10.174 06/05/02 Sev=Info/5 IKE/0x6300002F Received ISAKMP packet: peer = 172.18.124.158 27 11:56:10.184 06/05/02 Sev=Info/4 IKE/0x63000014 RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 172.18.124.158 28 11:56:10.184 06/05/02 Sev=Info/4 CM/0x6310000E Established Phase 1 SA. 1 Phase 1 SA in the system 29 11:56:10.184 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 172.18.124.158 30 11:56:10.204 06/05/02 Sev=Info/5 IKE/0x6300005D Client sending a firewall request to concentrator 31 11:56:10.204 06/05/02 Sev=Info/5 IKE/0x6300005C Firewall Policy: Product=Cisco Integrated Client, Capability= (Centralized Policy Push). 32 11:56:10.204 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 172.18.124.158 33 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x6300002F Received ISAKMP packet: peer = 172.18.124.158 34 11:56:10.265 06/05/02 Sev=Info/4 IKE/0x63000014 RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 172.18.124.158 35 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x63000010 MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.1.1.114 36 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x63000010 MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 10.1.1.10 37 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x63000010 MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NBNS(1) (a.k.a. WINS) : , value = 10.1.1.20 38 11:56:10.265 06/05/02 Sev=Info/5 IKE/0xA3000017 MODE_CFG_REPLY: The received (INTERNAL_ADDRESS_EXPIRY) attribute and value (86396) is not supported 39 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x6300000E MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(8)T1, RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 30-Mar-02 13:30 by ccai 40 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x6300000E MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = cisco.com 41 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x6300000D MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001 42 11:56:10.265 06/05/02 Sev=Info/5 IKE/0x6300000F SPLIT_NET #1 subnet = 10.38.0.0 mask = 255.255.0.0 protocol = 0 src port = 0 dest port=0 43 11:56:10.265 06/05/02 Sev=Info/4 CM/0x63100019 Mode Config data received 44 11:56:10.275 06/05/02 Sev=Info/5 IKE/0x63000055 Received a key request from Driver for IP address 172.18.124.158, GW IP = 172.18.124.158 45 11:56:10.275 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 172.18.124.158 46 11:56:10.575 06/05/02 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 47 11:56:10.605 06/05/02 Sev=Info/5 IKE/0x6300002F Received ISAKMP packet: peer = 172.18.124.158 48 11:56:10.605 06/05/02 Sev=Info/4 IKE/0x63000014 RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID, NOTIFY:STATUS_RESP_LIFETIME) from 172.18.124.158 49 11:56:10.605 06/05/02 Sev=Info/5 IKE/0x63000044 RESPONDER-LIFETIME notify has value of 3600 seconds 50 11:56:10.605 06/05/02 Sev=Info/5 IKE/0x63000045 RESPONDER-LIFETIME notify has value of 4608000 kb 51 11:56:10.605 06/05/02 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK QM *(HASH) to 172.18.124.158 52 11:56:10.605 06/05/02 Sev=Info/5 IKE/0x63000058 Loading IPsec SA (Message ID = 0x51A04966 OUTBOUND SPI = 0x61C53A64 INBOUND SPI = 0x8F9BB05F) 53 11:56:10.605 06/05/02 Sev=Info/5 IKE/0x63000025 Loaded OUTBOUND ESP SPI: 0x61C53A64 54 11:56:10.605 06/05/02 Sev=Info/5 IKE/0x63000026 Loaded INBOUND ESP SPI: 0x8F9BB05F 55 11:56:10.605 06/05/02 Sev=Info/4 CM/0x6310001A One secure connection established 56 11:56:10.625 06/05/02 Sev=Info/6 DIALER/0x63300003 Connection established. 57 11:56:10.735 06/05/02 Sev=Info/6 DIALER/0x63300008 MAPI32 Information - Outlook not default mail client 58 11:56:11.677 06/05/02 Sev=Info/4 IPSEC/0x63700010 Created a new key structure 59 11:56:11.677 06/05/02 Sev=Info/4 IPSEC/0x6370000F Added key with SPI=0x643ac561 into key list 60 11:56:11.677 06/05/02 Sev=Info/4 IPSEC/0x63700010 Created a new key structure 61 11:56:11.677 06/05/02 Sev=Info/4 IPSEC/0x6370000F Added key with SPI=0x5fb09b8f into key list
Révision | Date de publication | Commentaires |
---|---|---|
1.0 |
14-May-2009 |
Première publication |