La fonctionnalité de VPN multipoint dynamique (DMVPN) permet à des utilisateurs de mieux mettre à l'échelle des VPN IPSec grands et petits en combinant les tunnels d'encapsulation de routage générique (GRE), le cryptage IPSec et le Protocole de résolution de sauts successifs (NHRP) fournir aux utilisateurs une configuration simple par le biais de crypto-profils, qui annulent la nécessité de définir des crypto-cartes statiques, et la découverte dynamique des extrémités du tunnel.
Aucune spécification déterminée n'est requise pour ce document.
Les informations dans ce document sont basées sur les versions de logiciel et de matériel ci-dessous.
Routeurs Cisco 2691 et 3725
Logiciel Cisco IOS® Version 12.3(3)
Remarque : le transfert IPSec multiple n'est pris en charge que sur les versions 12.2.2(2)XK et 12.2.1(13)T et ultérieures du logiciel Cisco IOS.
La sortie de la commande show version sur le routeur est montrée ci-dessous :
sv9-4#show version Cisco Internetwork Operating System Software IOS (tm) 2600 Software (C2691-IK9S-M), Version 12.3(3), RELEASE SOFTWARE (fc2) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 19-Aug-03 05:52 by dchih Image text-base: 0x60008954, data-base: 0x61D08000 ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1) sv9-4 uptime is 1 hour, 39 minutes System returned to ROM by reload System image file is "flash:c2691-ik9s-mz.123-3.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco 2691 (R7000) processor (revision 0.1) with 98304K/32768K bytes of memory. Processor board ID JMX0710L5CE R7000 CPU at 160Mhz, Implementation 39, Rev 3.3, 256KB L2 Cache Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). 2 FastEthernet/IEEE 802.3 interface(s) 2 Serial(sync/async) network interface(s) 1 ATM network interface(s) 1 Virtual Private Network (VPN) Module(s) DRAM configuration is 64 bits wide with parity disabled. 55K bytes of non-volatile configuration memory. 125184K bytes of ATA System CompactFlash (Read/Write) Configuration register is 0x2102
Les informations présentées dans ce document ont été créées à partir de périphériques dans un environnement de laboratoire spécifique. All of the devices used in this document started with a cleared (default) configuration. Si vous travaillez dans un réseau opérationnel, assurez-vous de bien comprendre l'impact potentiel de toute commande avant de l'utiliser.
Cette caractéristique fonctionne selon les règles suivantes.
Chaque rayon a un tunnel IPsec permanent vers le concentrateur, et non vers les autres rayons dans le réseau. Chaque rayon s'enregistre comme client du serveur NHRP.
Quand un rayon doit envoyer un paquet à un sous-réseau (privé) de destination sur un autre rayon, il demande au serveur NHRP la vraie adresse (externe) du rayon de destination (cible).
Une fois que le rayon d'origine a appris l'adresse homologue du rayon cible, il peut lancer un tunnel IPsec dynamique au rayon cible.
Le tunnel de rayon à rayon est construit sur l'interface multipoint GRE (mGRE).
Les liaisons de rayon à rayon sont établies sur demande toutes les fois qu'il y a du trafic entre les rayons. Ensuite, les paquets peuvent contourner le concentrateur et utiliser le tunnel de rayon à rayon.
Les définitions suivantes s'appliquent à l'ensemble de règles.
NHRP — Un protocole de routage de client et serveur où le concentrateur est le serveur et les rayons sont les clients. Le concentrateur gère une base de données NHRP des adresses d'interface publique de chaque rayon. Chaque rayon enregistre sa vraie adresse quand il démarre et demande à la base de données NHRP des vraies adresses de rayons de destination afin de construire des tunnels directs.
Interface de tunnel mGRE - Permet à une interface simple GRE de prendre en charge des tunnels IPsec multiples et simplifie la taille et la complexité de la configuration.
Remarque : après une quantité préconfigurée d'inactivité sur les tunnels de rayon à rayon, le routeur désactive ces tunnels pour économiser des ressources (associations de sécurité IPSec [SA]).
Remarque : Le profil de trafic doit respecter la règle des 80 à 20 % : Le 80% du trafic se compose du trafic du rayon au concentrateur, et le 20% du trafic de rayon à rayon.
Pour plus d'informations sur les conventions utilisées dans ce document, reportez-vous à Conventions relatives aux conseils techniques Cisco.
Cette section vous fournit des informations pour configurer les fonctionnalités décrites dans ce document.
Remarque : Pour en savoir plus sur les commandes utilisées dans le présent document, utilisez l’outil de recherche de commandes (clients inscrits seulement).
Ce document utilise la configuration réseau indiquée dans le diagramme suivant :
Ce document utilise les configurations présentées ci-dessous.
Configuration du routeur concentrateur (sv9-2) |
---|
sv9-2#show run Building configuration... Current configuration : 1827 bytes ! version 12.3 service config service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-2 ! boot-start-marker boot-end-marker ! enable password cisco ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip ssh break-string ! !--- Create an Internet Security Association and Key Management !--- Protocol (ISAKMP) policy for Phase 1 negotiations. ! crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all the remote VPN !--- routers. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac ! !--- Create an IPSec profile to be applied dynamically to the !--- GRE over IPSec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! !--- Create a GRE tunnel template which will be applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.1 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp network-id 1 no ip split-horizon eigrp 90 no ip next-hop-self eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! !--- This is the outbound interface. interface FastEthernet0/0 ip address 209.168.202.225 255.255.255.0 duplex auto speed auto ! !--- This is the inbound interface. interface FastEthernet0/1 ip address 1.1.1.1 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 1.1.1.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.226 ! ! ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 password cisco login transport preferred all transport input all transport output all ! ! end |
Configuration du rayon #1 (sv9-3) |
---|
sv9-3#show run Building configuration... Current configuration : 1993 bytes ! version 12.3 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname sv9-3 ! boot-start-marker boot system flash:c3725-ik9s-mz.123-3.bin boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip ssh break-string ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all the remote VPN !--- routers and the hub router. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac ! !--- Create an IPSec profile to be applied dynamically to !--- the GRE over IPSec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! fax interface-type fax-mail ! ! ! ! ! !--- Create a GRE tunnel template to be applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.2 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp nhs 192.168.1.1 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! !--- This is the outbound interface. interface FastEthernet0/0 ip address 209.168.202.131 255.255.255.0 duplex auto speed auto ! !--- This is the inbound interface. interface FastEthernet0/1 ip address 2.2.2.2 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 2.2.2.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.225 ip route 3.3.3.0 255.255.255.0 Tunnel0 ! ! ! ! ! ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 login transport preferred all transport input all transport output all ! ! end |
Configuration du rayon #2 (sv9-4) |
---|
sv9-4#show run Building configuration... Current configuration : 1994 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-4 ! boot-start-marker boot system flash:c2691-ik9s-mz.123-3.bin boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip ssh break-string ! ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all the remote VPN !--- routers and the hub router. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac ! !--- Create an IPSec profile to be applied dynamically to !--- the GRE over IPSec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! !--- Create a GRE tunnel template to be applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.3 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp nhs 192.168.1.1 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! !--- This is the outbound interface. interface FastEthernet0/0 ip address 209.168.202.130 255.255.255.0 duplex auto speed auto ! interface Serial0/0 no ip address shutdown clockrate 2000000 no fair-queue ! !--- This is the inbound interface. interface FastEthernet0/1 ip address 3.3.3.3 255.255.255.0 duplex auto speed auto ! interface Serial0/1 no ip address shutdown clockrate 2000000 ! interface ATM1/0 no ip address shutdown no atm ilmi-keepalive ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 3.3.3.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 2.2.2.0 255.255.255.0 Tunnel0 ip route 0.0.0.0 0.0.0.0 209.168.202.225 ! ! ! ! ! ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 password cisco login transport preferred all transport input all transport output all ! ! end |
Cette section présente des informations que vous pouvez utiliser pour vous assurer que votre configuration fonctionne correctement.
Certaines commandes show sont prises en charge par l'Output Interpreter Tool (clients enregistrés uniquement), qui vous permet de voir une analyse de la sortie de la commande show.
show crypto engine connection active : affiche le total chiffré et déchiffré par SA.
show crypto ipsec sa — Affiche les statistiques sur les tunnels actifs.
show crypto isakmp sa — Affiche l'état pour le ISAKMP SA.
Cette section fournit des informations que vous pouvez utiliser pour dépanner votre configuration.
Problème
Le tunnel DMVPN est instable par intermittence.
Solution
Quand les tunnels DMVPN sont instables, vérifiez la proximité entre les routeurs, car les problèmes de formation de proximité entre routeurs peuvent rendre instable le tunnel DMVPN. Afin de résoudre ce problème, assurez-vous que la proximité entre les routeurs est toujours active.
Note : Avant d'émettre des commandes debug, consultez Informations importantes sur les commandes de débogage.
debug crypto ipsec — Affiche des événements IPsec.
debug crypto isakmp — Affiche des messages sur des événements d'Échange de clés Internet (IKE).
debug crypto engine — Affiche des informations du moteur de chiffrement.
Vous trouverez les informations supplémentaires pour dépanner IPSec à la section Dépannage de sécurité IP - Présentation et utilisation des commandes de débogage.
Le résultat du débogage suivant montre la requête de NHRP et la réponse de résolution NHRP. Les débogages ont été saisis à partir des rayons sv9-4 et sv9-3 et du concentrateur sv9-2.
sv9-4#show debug NHRP: NHRP protocol debugging is on sv9-4#ping 2.2.2.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms sv9-4# *Mar 1 02:06:01.667: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.671: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.675: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.679: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.225 *Mar 1 02:06:01.679: NHRP: Send Resolution Request via Tunnel0, packet size: 84 *Mar 1 02:06:01.679: src: 192.168.1.3, dst: 192.168.1.1 *Mar 1 02:06:01.679: NHRP: 84 bytes out Tunnel0 *Mar 1 02:06:01.679: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:01.683: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 *Mar 1 02:06:03.507: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.225 *Mar 1 02:06:03.507: NHRP: Send Resolution Request via Tunnel0, packet size: 84 *Mar 1 02:06:03.507: src: 192.168.1.3, dst: 192.168.1.1 *Mar 1 02:06:03.507: NHRP: 84 bytes out Tunnel0 *Mar 1 02:06:03.511: NHRP: Receive Resolution Reply via Tunnel0, packet size: 132 *Mar 1 02:06:03.511: NHRP: netid_in = 0, to_us = 1 *Mar 1 02:06:03.511: NHRP: No need to delay processing of resolution event nbma src:209.168.202.130 nbma dst:209.168.202.131 sv9-3# 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.225 05:31:12: NHRP: Send Resolution Request via Tunnel0, packet size: 84 05:31:12: src: 192.168.1.2, dst: 192.168.1.1 05:31:12: NHRP: 84 bytes out Tunnel0 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:12: NHRP: Receive Resolution Request via Tunnel0, packet size: 104 05:31:12: NHRP: netid_in = 1, to_us = 0 05:31:12: NHRP: Delaying resolution request nbma src:209.168.202.131 nbma dst:209.168.202.130 reason:IPSEC-IFC: need to wait for IPsec SAs. 05:31:12: NHRP: Receive Resolution Reply via Tunnel0, packet size: 112 05:31:12: NHRP: netid_in = 0, to_us = 1 05:31:12: NHRP: Resolution request is already being processed (delayed). 05:31:12: NHRP: Resolution Request not queued. Already being processed (delayed). 05:31:12: NHRP: Sending packet to NHS 192.168.1.1 on Tunnel0 05:31:13: NHRP: Process delayed resolution request src:192.168.1.3 dst:2.2.2.2 05:31:13: NHRP: No need to delay processing of resolution event nbma src:209.168.202.131 nbma dst:209.168.202.130 sv9-2# *Mar 1 06:03:40.174: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.174: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.178: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.182: NHRP: Receive Resolution Request via Tunnel0, packet size: 84 *Mar 1 06:03:40.182: NHRP: netid_in = 1, to_us = 0 *Mar 1 06:03:40.182: NHRP: No need to delay processing of resolution event nbma src:209.168.202.225 nbma dst:209.168.202.130 *Mar 1 06:03:40.182: NHRP: nhrp_rtlookup yielded Tunnel0 *Mar 1 06:03:40.182: NHRP: netid_out 1, netid_in 1 *Mar 1 06:03:40.182: NHRP: nhrp_cache_lookup_comp returned 0x0 *Mar 1 06:03:40.182: NHRP: calling nhrp_forward *Mar 1 06:03:40.182: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.131 *Mar 1 06:03:40.182: NHRP: Forwarding Resolution Request via Tunnel0, packet size: 104 *Mar 1 06:03:40.182: src: 192.168.1.1, dst: 2.2.2.2 *Mar 1 06:03:40.182: NHRP: 104 bytes out Tunnel0 *Mar 1 06:03:40.182: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:40.182: NHRP: Receive Resolution Request via Tunnel0, packet size: 84 *Mar 1 06:03:40.182: NHRP: netid_in = 1, to_us = 0 *Mar 1 06:03:40.182: NHRP: No need to delay processing of resolution event nbma src:209.168.202.225 nbma dst:209.168.202.131 *Mar 1 06:03:40.182: NHRP: nhrp_rtlookup yielded Tunnel0 *Mar 1 06:03:40.182: NHRP: netid_out 1, netid_in 1 *Mar 1 06:03:40.182: NHRP: nhrp_cache_lookup_comp returned 0x63DE9498 *Mar 1 06:03:40.182: NHRP: Encapsulation succeeded. Tunnel IP addr 209.168.202.131 *Mar 1 06:03:40.182: NHRP: Send Resolution Reply via Tunnel0, packet size: 112 *Mar 1 06:03:40.186: src: 192.168.1.1, dst: 192.168.1.2 *Mar 1 06:03:40.186: NHRP: 112 bytes out Tunnel0 *Mar 1 06:03:40.186: NHRP: Forwarding packet within same fabric Tunnel0 -> Tunnel0 *Mar 1 06:03:42.010: NHRP: Receive Resolution Request via Tunnel0, packet size: 84 *Mar 1 06:03:42.010: NHRP: netid_in = 1, to_us = 0 *Mar 1 06:03:42.010: NHRP: No need to delay processing of resolution event nbma src:209.168.202.225 nbma dst:209.168.202.130
Le résultat du débogage suivant montre l'ISAKMP et la négociation IPSec. Les débogages ont été saisis à partir des rayons sv9-4 et sv9-3 et du concentrateur sv9-2.
sv9-4#ping 2.2.2.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms sv9-4# *Mar 1 02:25:37.107: ISAKMP (0:0): received packet from 209.168.202.131 dport 500 sport 500 Global (N) NEW SA *Mar 1 02:25:37.107: ISAKMP: local port 500, remote port 500 *Mar 1 02:25:37.107: ISAKMP: insert sa successfully sa = 63B38288 *Mar 1 02:25:37.107: ISAKMP (0:12): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH *Mar 1 02:25:37.107: ISAKMP (0:12): Old State = IKE_READY New State = IKE_R_MM1 *Mar 1 02:25:37.107: ISAKMP (0:12): processing SA payload. message ID = 0 *Mar 1 02:25:37.107: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID seems Unity/DPD but major 157 mismatch *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID is NAT-T v3 *Mar 1 02:25:37.107: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID seems Unity/DPD but major 123 mismatch *Mar 1 02:25:37.107: ISAKMP (0:12): vendor ID is NAT-T v2 *Mar 1 02:25:37.107: ISAKMP: Looking for a matching key for 209.168.202.131 in default : success *Mar 1 02:25:37.107: ISAKMP (0:12): found peer pre-shared key matching 209.168.202.131 *Mar 1 02:25:37.107: ISAKMP (0:12) local preshared key found *Mar 1 02:25:37.107: ISAKMP : Scanning profiles for xauth ... *Mar 1 02:25:37.107: ISAKMP (0:12): Checking ISAKMP transform 1 against priority 10 policy *Mar 1 02:25:37.107: ISAKMP: encryption DES-CBC *Mar 1 02:25:37.107: ISAKMP: hash MD5 *Mar 1 02:25:37.107: ISAKMP: default group 1 *Mar 1 02:25:37.107: ISAKMP: auth pre-share *Mar 1 02:25:37.107: ISAKMP: life type in seconds *Mar 1 02:25:37.107: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 *Mar 1 02:25:37.107: ISAKMP (0:12): atts are acceptable. Next payload is 0 *Mar 1 02:25:37.115: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID seems Unity/DPD but major 157 mismatch *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID is NAT-T v3 *Mar 1 02:25:37.115: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID seems Unity/DPD but major 123 mismatch *Mar 1 02:25:37.115: ISAKMP (0:12): vendor ID is NAT-T v2 *Mar 1 02:25:37.115: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE *Mar 1 02:25:37.115: ISAKMP (0:12): Old State = IKE_R_MM1 New State = IKE_R_MM1 *Mar 1 02:25:37.115: ISAKMP (0:12): constructed NAT-T vendor-03 ID *Mar 1 02:25:37.115: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) MM_SA_SETUP *Mar 1 02:25:37.115: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE *Mar 1 02:25:37.115: ISAKMP (0:12): Old State = IKE_R_MM1 New State = IKE_R_MM2 *Mar 1 02:25:37.123: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) MM_SA_SETUP *Mar 1 02:25:37.123: ISAKMP (0:12): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH *Mar 1 02:25:37.123: ISAKMP (0:12): Old State = IKE_R_MM2 New State = IKE_R_MM3 *Mar 1 02:25:37.123: ISAKMP (0:12): processing KE payload. message ID = 0 *Mar 1 02:25:37.131: ISAKMP (0:12): processing NONCE payload. message ID = 0 *Mar 1 02:25:37.131: ISAKMP: Looking for a matching key for 209.168.202.131 in default : success *Mar 1 02:25:37.131: ISAKMP (0:12): found peer pre-shared key matching 209.168.202.131 *Mar 1 02:25:37.131: ISAKMP: Looking for a matching key for 209.168.202.131 in default : success *Mar 1 02:25:37.131: ISAKMP (0:12): found peer pre-shared key matching 209.168.202.131 *Mar 1 02:25:37.135: ISAKMP (0:12): SKEYID state generated *Mar 1 02:25:37.135: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.135: ISAKMP (0:12): vendor ID is Unity *Mar 1 02:25:37.135: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.135: ISAKMP (0:12): vendor ID is DPD *Mar 1 02:25:37.135: ISAKMP (0:12): processing vendor id payload *Mar 1 02:25:37.135: ISAKMP (0:12): speaking to another IOS box! *Mar 1 02:25:37.135: ISAKMP:received payload type 17 *Mar 1 02:25:37.135: ISAKMP:received payload type 17 *Mar 1 02:25:37.135: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE *Mar 1 02:25:37.135: ISAKMP (0:12): Old State = IKE_R_MM3 New State = IKE_R_MM3 *Mar 1 02:25:37.135: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) MM_KEY_EXCH *Mar 1 02:25:37.135: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE *Mar 1 02:25:37.135: ISAKMP (0:12): Old State = IKE_R_MM3 New State = IKE_R_MM4 *Mar 1 02:25:37.147: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) MM_KEY_EXCH *Mar 1 02:25:37.151: ISAKMP (0:12): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH *Mar 1 02:25:37.151: ISAKMP (0:12): Old State = IKE_R_MM4 New State = IKE_R_MM5 *Mar 1 02:25:37.151: ISAKMP (0:12): processing ID payload. message ID = 0 *Mar 1 02:25:37.151: ISAKMP (0:12): peer matches *none* of the profiles *Mar 1 02:25:37.151: ISAKMP (0:12): processing HASH payload. message ID = 0 *Mar 1 02:25:37.151: ISAKMP (0:12): processing NOTIFY INITIAL_CONTACT protocol 1 spi 0, message ID = 0, sa = 63B38288 *Mar 1 02:25:37.151: ISAKMP (0:12): Process initial contact, bring down existing phase 1 and 2 SA's with local 209.168.202.130 remote 209.168.202.131 remote port 500 *Mar 1 02:25:37.151: ISAKMP (0:12): SA has been authenticated with 209.168.202.131 *Mar 1 02:25:37.151: ISAKMP (0:12): peer matches *none* of the profiles *Mar 1 02:25:37.151: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE *Mar 1 02:25:37.151: ISAKMP (0:12): Old State = IKE_R_MM5 New State = IKE_R_MM5 *Mar 1 02:25:37.151: IPSEC(key_engine): got a queue event... *Mar 1 02:25:37.151: ISAKMP (0:12): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR *Mar 1 02:25:37.151: ISAKMP (12): ID payload next-payload : 8 type : 1 addr : 209.168.202.130 protocol : 17 port : 500 length : 8 *Mar 1 02:25:37.151: ISAKMP (12): Total payload length: 12 *Mar 1 02:25:37.155: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) MM_KEY_EXCH *Mar 1 02:25:37.155: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE *Mar 1 02:25:37.155: ISAKMP (0:12): Old State = IKE_R_MM5 New State = IKE_P1_COMPLETE *Mar 1 02:25:37.155: ISAKMP (0:12): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE *Mar 1 02:25:37.155: ISAKMP (0:12): Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE *Mar 1 02:25:37.159: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) QM_IDLE *Mar 1 02:25:37.159: ISAKMP: set new node -1682446278 to QM_IDLE *Mar 1 02:25:37.159: ISAKMP (0:12): processing HASH payload. message ID = -1682446278 *Mar 1 02:25:37.159: ISAKMP (0:12): processing SA payload. message ID = -1682446278 *Mar 1 02:25:37.159: ISAKMP (0:12): Checking IPSec proposal 1 *Mar 1 02:25:37.159: ISAKMP: transform 1, ESP_3DES *Mar 1 02:25:37.159: ISAKMP: attributes in transform: *Mar 1 02:25:37.159: ISAKMP: encaps is 1 *Mar 1 02:25:37.159: ISAKMP: SA life type in seconds *Mar 1 02:25:37.159: ISAKMP: SA life duration (basic) of 120 *Mar 1 02:25:37.159: ISAKMP: SA life type in kilobytes *Mar 1 02:25:37.159: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 *Mar 1 02:25:37.159: ISAKMP: authenticator is HMAC-MD5 *Mar 1 02:25:37.159: ISAKMP (0:12): atts are acceptable. *Mar 1 02:25:37.163: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 209.168.202.130, remote= 209.168.202.131, local_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1), remote_proxy= 209.168.202.131/255.255.255.255/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2 *Mar 1 02:25:37.163: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.163: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.163: ISAKMP (0:12): processing NONCE payload. message ID = -1682446278 *Mar 1 02:25:37.163: ISAKMP (0:12): processing ID payload. message ID = -1682446278 *Mar 1 02:25:37.163: ISAKMP (0:12): processing ID payload. message ID = -1682446278 *Mar 1 02:25:37.163: ISAKMP (0:12): asking for 1 spis from ipsec *Mar 1 02:25:37.163: ISAKMP (0:12): Node -1682446278, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Mar 1 02:25:37.163: ISAKMP (0:12): Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE *Mar 1 02:25:37.163: IPSEC(key_engine): got a queue event... *Mar 1 02:25:37.163: IPSEC(spi_response): getting spi 3935077313 for SA from 209.168.202.130 to 209.168.202.131 for prot 3 *Mar 1 02:25:37.163: ISAKMP: received ke message (2/1) *Mar 1 02:25:37.415: ISAKMP (0:12): sending packet to 209.168.202.131 my_port 500 peer_port 500 (R) QM_IDLE *Mar 1 02:25:37.415: ISAKMP (0:12): Node -1682446278, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY *Mar 1 02:25:37.415: ISAKMP (0:12): Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 *Mar 1 02:25:37.427: ISAKMP (0:12): received packet from 209.168.202.131 dport 500 sport 500 Global (R) QM_IDLE *Mar 1 02:25:37.439: ISAKMP (0:12): Creating IPSec SAs *Mar 1 02:25:37.439: inbound SA from 209.168.202.131 to 209.168.202.130 (f/i) 0/ 0 (proxy 209.168.202.131 to 209.168.202.130) *Mar 1 02:25:37.439: has spi 0xEA8C83C1 and conn_id 5361 and flags 2 *Mar 1 02:25:37.439: lifetime of 120 seconds *Mar 1 02:25:37.439: lifetime of 4608000 kilobytes *Mar 1 02:25:37.439: has client flags 0x0 *Mar 1 02:25:37.439: outbound SA from 209.168.202.130 to 209.168.202.131 (f/i) 0/ 0 (proxy 209.168.202.130 to 209.168.202.131) *Mar 1 02:25:37.439: has spi 1849847934 and conn_id 5362 and flags A *Mar 1 02:25:37.439: lifetime of 120 seconds *Mar 1 02:25:37.439: lifetime of 4608000 kilobytes *Mar 1 02:25:37.439: has client flags 0x0 *Mar 1 02:25:37.439: ISAKMP (0:12): deleting node -1682446278 error FALSE reason "quick mode done (await)" *Mar 1 02:25:37.439: ISAKMP (0:12): Node -1682446278, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH *Mar 1 02:25:37.439: ISAKMP (0:12): Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE *Mar 1 02:25:37.439: IPSEC(key_engine): got a queue event... *Mar 1 02:25:37.439: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 209.168.202.130, remote= 209.168.202.131, local_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0xEA8C83C1(3935077313), conn_id= 5361, keysize= 0, flags= 0x2 *Mar 1 02:25:37.439: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 209.168.202.130, remote= 209.168.202.131, local_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0x6E42707E(1849847934), conn_id= 5362, keysize= 0, flags= 0xA *Mar 1 02:25:37.439: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.439: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = *Mar 1 02:25:37.439: IPSEC(add mtree): src 209.168.202.130, dest 209.168.202.131, dest_port 0 *Mar 1 02:25:37.439: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.130, sa_prot= 50, sa_spi= 0xEA8C83C1(3935077313), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5361 *Mar 1 02:25:37.439: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.131, sa_prot= 50, sa_spi= 0x6E42707E(1849847934), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5362 sv9-4# *Mar 1 02:25:55.183: ISAKMP (0:10): purging node 180238748 *Mar 1 02:25:55.323: ISAKMP (0:10): purging node -1355110639 sv9-4# sv9-3# 05:50:48: ISAKMP: received ke message (1/1) 05:50:48: ISAKMP (0:0): SA request profile is (NULL) 05:50:48: ISAKMP: local port 500, remote port 500 05:50:48: ISAKMP: set new node 0 to QM_IDLE 05:50:48: ISAKMP: insert sa successfully sa = 62DB93D0 05:50:48: ISAKMP (0:26): Can not start Aggressive mode, trying Main mode. 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP (0:26): constructed NAT-T vendor-03 ID 05:50:48: ISAKMP (0:26): constructed NAT-T vendor-02 ID 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM 05:50:48: ISAKMP (0:26): Old State = IKE_READY New State = IKE_I_MM1 05:50:48: ISAKMP (0:26): beginning Main Mode exchange 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) MM_NO_STATE 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) MM_NO_STATE 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM1 New State = IKE_I_MM2 05:50:48: ISAKMP (0:26): processing SA payload. message ID = 0 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID seems Unity/DPD but major 157 mismatch 05:50:48: ISAKMP (0:26): vendor ID is NAT-T v3 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP (0:26) local preshared key found 05:50:48: ISAKMP : Scanning profiles for xauth ... 05:50:48: ISAKMP (0:26): Checking ISAKMP transform 1 against priority 10 policy 05:50:48: ISAKMP: encryption DES-CBC 05:50:48: ISAKMP: hash MD5 05:50:48: ISAKMP: default group 1 05:50:48: ISAKMP: auth pre-share 05:50:48: ISAKMP: life type in seconds 05:50:48: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80 05:50:48: ISAKMP (0:26): atts are acceptable. Next payload is 0 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID seems Unity/DPD but major 157 mismatch 05:50:48: ISAKMP (0:26): vendor ID is NAT-T v3 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM2 New State = IKE_I_MM2 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) MM_SA_SETUP 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM2 New State = IKE_I_MM3 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) MM_SA_SETUP 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM3 New State = IKE_I_MM4 05:50:48: ISAKMP (0:26): processing KE payload. message ID = 0 05:50:48: ISAKMP (0:26): processing NONCE payload. message ID = 0 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP: Looking for a matching key for 209.168.202.130 in default : success 05:50:48: ISAKMP (0:26): found peer pre-shared key matching 209.168.202.130 05:50:48: ISAKMP (0:26): SKEYID state generated 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID is Unity 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): vendor ID is DPD 05:50:48: ISAKMP (0:26): processing vendor id payload 05:50:48: ISAKMP (0:26): speaking to another IOS box! 05:50:48: ISAKMP:received payload type 17 05:50:48: ISAKMP:received payload type 17 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM4 New State = IKE_I_MM4 05:50:48: ISAKMP (0:26): Send initial contact 05:50:48: ISAKMP (0:26): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR 05:50:48: ISAKMP (26): ID payload next-payload : 8 type : 1 addr : 209.168.202.131 protocol : 17 port : 500 length : 8 05:50:48: ISAKMP (26): Total payload length: 12 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) MM_KEY_EXCH 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM4 New State = IKE_I_MM5 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) MM_KEY_EXCH 05:50:48: ISAKMP (0:26): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM5 New State = IKE_I_MM6 05:50:48: ISAKMP (0:26): processing ID payload. message ID = 0 05:50:48: ISAKMP (0:26): processing HASH payload. message ID = 0 05:50:48: ISAKMP (0:26): SA has been authenticated with 209.168.202.130 05:50:48: ISAKMP (0:26): peer matches *none* of the profiles 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM6 New State = IKE_I_MM6 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_I_MM6 New State = IKE_P1_COMPLETE 05:50:48: ISAKMP (0:26): beginning Quick Mode exchange, M-ID of -1682446278 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) QM_IDLE 05:50:48: ISAKMP (0:26): Node -1682446278, Input = IKE_MESG_INTERNAL, IKE_INIT_QM 05:50:48: ISAKMP (0:26): Old State = IKE_QM_READY New State = IKE_QM_I_QM1 05:50:48: ISAKMP (0:26): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE 05:50:48: ISAKMP (0:26): Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE 05:50:48: ISAKMP (0:26): received packet from 209.168.202.130 dport 500 sport 500 Global (I) QM_IDLE 05:50:48: ISAKMP (0:26): processing HASH payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): processing SA payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): Checking IPSec proposal 1 05:50:48: ISAKMP: transform 1, ESP_3DES 05:50:48: ISAKMP: attributes in transform: 05:50:48: ISAKMP: encaps is 1 05:50:48: ISAKMP: SA life type in seconds 05:50:48: ISAKMP: SA life duration (basic) of 120 05:50:48: ISAKMP: SA life type in kilobytes 05:50:48: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0 05:50:48: ISAKMP: authenticator is HMAC-MD5 05:50:48: ISAKMP (0:26): atts are acceptable. 05:50:48: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= 209.168.202.131, remote= 209.168.202.130, local_proxy= 209.168.202.131/255.255.255.255/47/0 (type=1), remote_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: ISAKMP (0:26): processing NONCE payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): processing ID payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): processing ID payload. message ID = -1682446278 05:50:48: ISAKMP (0:26): Creating IPSec SAs 05:50:48: inbound SA from 209.168.202.130 to 209.168.202.131 (f/i) 0/ 0 (proxy 209.168.202.130 to 209.168.202.131) 05:50:48: has spi 0x6E42707E and conn_id 5547 and flags 2 05:50:48: lifetime of 120 seconds 05:50:48: lifetime of 4608000 kilobytes 05:50:48: has client flags 0x0 05:50:48: outbound SA from 209.168.202.131 to 209.168.202.130 (f/i) 0/ 0 (proxy 209.168.202.131 to 209.168.202.130) 05:50:48: has spi -359889983 and conn_id 5548 and flags A 05:50:48: lifetime of 120 seconds 05:50:48: lifetime of 4608000 kilobytes 05:50:48: has client flags 0x0 05:50:48: IPSEC(key_engine): got a queue event... 05:50:48: IPSEC(initialize_sas): , (key eng. msg.) INBOUND local= 209.168.202.131, remote= 209.168.202.130, local_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0x6E42707E(1849847934), conn_id= 5547, keysize= 0, flags= 0x2 05:50:48: IPSEC(initialize_sas): , (key eng. msg.) OUTBOUND local= 209.168.202.131, remote= 209.168.202.130, local_proxy= 209.168.202.131/0.0.0.0/47/0 (type=1), remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1), protocol= ESP, transform= esp-3des esp-md5-hmac , lifedur= 120s and 4608000kb, spi= 0xEA8C83C1(3935077313), conn_id= 5548, keysize= 0, flags= 0xA 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: IPSEC(kei_proxy): head = Tunnel0-head-0, map->ivrf = , kei->ivrf = 05:50:48: IPSEC(add mtree): src 209.168.202.131, dest 209.168.202.130, dest_port 0 05:50:48: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.131, sa_prot= 50, sa_spi= 0x6E42707E(1849847934), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5547 05:50:48: IPSEC(create_sa): sa created, (sa) sa_dest= 209.168.202.130, sa_prot= 50, sa_spi= 0xEA8C83C1(3935077313), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 5548 05:50:48: ISAKMP (0:26): sending packet to 209.168.202.130 my_port 500 peer_port 500 (I) QM_IDLE 05:50:48: ISAKMP (0:26): deleting node -1682446278 error FALSE reason "" 05:50:48: ISAKMP (0:26): Node -1682446278, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH 05:50:48: ISAKMP (0:26): Old State = IKE_QM_I_QM1 New State = IKE_QM_PHASE2_COMPLETE 05:50:49: ISAKMP (0:21): purging node 334570133 sv9-3#
Révision | Date de publication | Commentaires |
---|---|---|
1.0 |
23-Sep-2009 |
Première publication |