Este documento describe cómo configurar los servicios de la identidad en un Cisco Catalyst 3850 Series Switch con el marco enterado del establecimiento de una red de la sesión. Ésta es una nueva manera de configurar los servicios de la identidad (802.1x, puente de la autenticación MAC (MAB), WebAuth) que permite la mayores flexibilidad y funciones. Utiliza el lenguaje de la directiva de la clasificación típica de Cisco (C3PL) junto con las plantillas del servicio que se pueden salvar localmente o en el servidor del Cisco Identity Services Engine (ISE).
Cisco recomienda que tenga conocimiento sobre estos temas:
La información que contiene este documento se basa en las siguientes versiones de software y hardware.
La información que contiene este documento se creó a partir de los dispositivos en un ambiente de laboratorio específico. Todos los dispositivos que se utilizan en este documento se pusieron en funcionamiento con una configuración verificada (predeterminada). Si la red está funcionando, asegúrese de haber comprendido el impacto que puede tener cualquier comando.
Las plantillas del servicio contienen un conjunto de los atributos de la política que se pueden asociar a una sesión del usuario vía una acción específica en la directiva de control. Dos ejemplos se presentan en este documento:
El MAB se utiliza como el ejemplo en este documento. Sin embargo, es posible utilizar el 802.1x y/o WebAuth y construir las directivas complejas con C3PL.
Ambos ejemplos presentados aquí implican un PC de Windows que conecta con el conmutador que realiza el MAB. La dirección MAC de Windows no se configura en el ISE, que es porqué el MAB falla. Entonces, el conmutador aplica la directiva definida en la plantilla del servicio.
Después del error MAB, el conmutador aplica la plantilla local-definida del servicio.
Aquí está el flujo:
Para más Información completa, refiera a la guía de configuración basada en la identidad de los servicios de red, la versión 3SE (Catalyst 3850 Switch) del Cisco IOS XE.
Aquí está un ejemplo básico:
aaa new-model
!
aaa group server radius ISE
server name ISE
!
aaa authentication dot1x default group ISE
aaa authorization network default group ISE
aaa accounting identity default start-stop group ISE
dot1x system-auth-control
service-template MAB_FAIL_LOCAL <--- Local service template
access-group MAB_FAIL_LOCAL_ACL
class-map type control subscriber match-all MAB-FAIL
match result-type method mab authoritative <--- class MAB failure
!
policy-map type control subscriber POLICY_MAB
event session-started match-all
10 class always do-until-failure
10 authenticate using mab aaa authc-list ISE priority 20 <--- try MAB
20 authenticate using mab aaa authz-list ISE priority 20
event authentication-failure match-first
10 class MAB-FAIL do-until-failure
20 activate service-template MAB_FAIL_LOCAL <--- apply local template service
for the MAB failure
interface GigabitEthernet1/0/1
switchport mode access
access-session port-control auto
mab
spanning-tree portfast
service-policy type control subscriber POLICY_MAB
radius server ISE
address ipv4 10.48.66.74 auth-port 1645 acct-port 1646
key cisco
ip access-list extended MAB_FAIL_LOCAL_ACL
permit icmp any any
Aquí está el flujo:
Después de que usted agregue el dispositivo de acceso a la red, se requiere el perfil de la autorización:
Es importante controlar la casilla de verificación de la plantilla del servicio, y utilizar el mismo nombre que el que está definido en el conmutador.
Esta configuración tiene cuatro diferencias del primer ejemplo:
Esta es la configuración:
aaa new-model
!
aaa group server radius ISE
server name ISE
!
aaa authentication dot1x default group ISE
aaa authorization network default group ISE
aaa authorization network ISE group ISE <--- used to retrieve
service-template
from ISE
aaa accounting identity default start-stop group ISE
dot1x system-auth-control
aaa server radius dynamic-author
client 10.48.66.74 server-key cisco
class-map type control subscriber match-all MAB-FAIL
match result-type method mab authoritative <--- class MAB failure
!
policy-map type control subscriber POLICY_MAB
event session-started match-all
10 class always do-until-failure
10 authenticate using mab aaa authc-list ISE priority 20 <--- try MAB
20 authenticate using mab aaa authz-list ISE priority 20
event authentication-failure match-first
10 class MAB-FAIL do-until-failure
20 activate service-template MAB_FAIL aaa-list ISE replace-all <--- apply
template
policy defined on ISE for the MAB failure
interface GigabitEthernet1/0/1
switchport mode access
access-session port-control auto
mab
spanning-tree portfast
service-policy type control subscriber POLICY_MAB
radius server ISE
address ipv4 10.48.66.74 auth-port 1645 acct-port 1646
key cisco
Usted debe configurar la ayuda CoA RADIUS en el conmutador después de que usted cambie la plantilla (perfil de la autorización) en el ISE, porque envía el CoA para poner al día la plantilla en el conmutador.
En el Catalyst 3850 Series Switch, ingrese este comando para verificar a la sesión del usuario:
3850-1#show access-session int g1/0/1 details
Interface: GigabitEthernet1/0/1
IIF-ID: 0x1091E80000000B0
MAC Address: dc7b.94a3.7005
IPv6 Address: Unknown
IPv4 Address: Unknown
User-Name: dc7b94a37005
Status: Unauthorized
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
Common Session ID: 0A30276F0000117D52D8816C
Acct Session ID: Unknown
Handle: 0x50000368
Current Policy: POLICY_MAB
Local Policies:
Template: MAB_FAIL_LOCAL (priority 150)
Filter-ID: MAB_FAIL_LOCAL_ACL
Method status list:
Method State
mab Authc Failed
3850-1#sh ip access-lists MAB_FAIL_LOCAL_ACL
Extended IP access list MAB_FAIL_LOCAL_ACL
10 permit icmp any any
En el Catalyst 3850 Series Switch, ingrese este comando para verificar a la sesión del usuario:
3850-1# show access-session interface g1/0/1 details
Interface: GigabitEthernet1/0/1
IIF-ID: 0x1058A40000000AB
MAC Address: dc7b.94a3.7005
IPv6 Address: Unknown
IPv4 Address: Unknown
User-Name: dc7b94a37005
Status: Unauthorized
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
Common Session ID: 0A30276F0000116851173EFE
Acct Session ID: Unknown
Handle: 0xCC000363
Current Policy: POLICY_MAB
Local Policies:
Template: MAB_FAIL (priority 150)
ACS ACL: xACSACLx-IP-MAB-FAIL-ACL-528741f3
Method status list:
Method State
mab Authc Failed
Observe que el estado está fallado, pero que la plantilla específica y los DACL asociados son aplicados:
3850-1#show ip access-lists
Extended IP access list implicit_deny_acl
10 deny ip any any
Extended IP access list xACSACLx-IP-MAB-FAIL-ACL-528741f3 (per-user)
1 permit icmp any any <--- DACL from ISE
La lista de control de acceso (ACL) no es visible bajo interfaz:
3850-1#show ip access-lists interface g1/0/1 in
3850-1#show ip access-lists interface g1/0/1
3850-1#show ip access-lists interface g1/0/1 out
3850-1#
Es posible verificar si ASIC (dotación física) se programa correctamente:
3850-1# show platform acl
########################################################
######### ##################
######## Printing LE Infos #################
######### ##################
########################################################
########################################################
## LE INFO: (LETYPE: Group)
########################################################
LE: 7 (Client MAC dc7b.94a3.7005) (ASIC1)
------------
leinfo: 0x5171eea0
LE handle: 0x61120fb0
LE Type: Group
IIF ID: 0x1058a40000000ab
Input IPv4 ACL: label 4 h/w 4 (read from h/w 4)
BO 0x196000000 [CGACL]: xACSACLx-IP-MAB-FAIL-ACL-528741f3
BO 0x1fffffa00 [CGACL]: implicit_deny_acl
Output IPv4 ACL: label 0 h/w 0 (Group LE and label are not linked)
Input IPv6 ACL: label 0 h/w 0 (Group LE and label are not linked)
Output IPv6 ACL: label 0 h/w 0 (Group LE and label are not linked)
Input MAC ACL: label 0 h/w 0 (Group LE and label are not linked)
Output MAC ACL: label 0 h/w 0 (Group LE and label are not linked)
Cada sesión del usuario que tiene un diverso DACL tendrá una entrada separada programada en ASIC. En el ISE, hay tres autenticaciones separadas:
Aquí está una mirada más atenta en los pasos cuando usted recibe el pedido la plantilla del servicio:
11001 | Acceso-petición recibida RADIUS | |
11017 | El RADIUS creó una nueva sesión | |
11022 | Agregó el dACL especificado en el perfil de la autorización | |
11002 | El RADIUS vuelto Acceso-valida |
Esto muestra claramente que las reglas de la autenticación/de la autorización no están procesadas.
Aquí están las depuraciones para el decorado actual. Algunas salidas se omiten para mayor clareza:
3850-1#show debugging
epm:
EPM session error debugging is on
EPM session error detailed debugging is on
EPM fsm error debugging is on
EPM fsm error detailed debugging is on
EPM packet error debugging is on
EPM packet error detailed debugging is on
EPM SPI errors debugging is on
EPM session events debugging is on
EPM fsm events debugging is on
EPM fsm events detailed debugging is on
EPM packet events debugging is on
EPM packet events detailed debugging is on
EPM SPI events debugging is on
Radius protocol debugging is on
Radius protocol verbose debugging is on
Radius packet protocol debugging is on
Auth Manager:
Auth Manager errors debugging is on
Auth Manager events debugging is on
Auth Manager detailed debugs debugging is on
Auth Manager sync debugging is on
dot1x:
Dot1x registry info debugging is on
Dot1x redundancy info debugging is on
Dot1x packet info debugging is on
Dot1x events debugging is on
Dot1x State machine transitions and actions debugging is on
Dot1x Errors debugging is on
Dot1x Supplicant EAP-FAST debugging is on
Dot1x Manager debugging is on
Dot1x Supplicant State Machine debugging is on
*Nov 16 11:45:10.680: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] New client
dc7b.94a3.7005 - client handle 0x00000001 for SVM
*Nov 16 11:45:11.347: AUTH-DETAIL: [dc7b.94a3.7005, Gi1/0/1] Create attr list,
session 0x50000368:
*Nov 16 11:45:11.347: AUTH-DETAIL: [dc7b.94a3.7005, Gi1/0/1] - adding MAC
dc7b.94a3.7005
*Nov 16 11:45:11.347: AUTH-DETAIL: [dc7b.94a3.7005, Gi1/0/1] - adding Swidb
0x38A8DABC
*Nov 16 11:45:11.348: AUTH-DETAIL: [dc7b.94a3.7005, Gi1/0/1] - adding
AAA_ID=117D
*Nov 16 11:45:11.348: AUTH-DETAIL: [dc7b.94a3.7005, Gi1/0/1] - adding
Audit_sid=0A30276F0000117D52D8816C
*Nov 16 11:45:11.348: AUTH-DETAIL: [dc7b.94a3.7005, Gi1/0/1] - adding IIF
ID=0x1091E80000000B0
*Nov 16 11:45:11.348: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Policy processing
started for 0x50000368(dc7b.94a3.7005)
*Nov 16 11:45:11.348: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Policy event will
be processed synchronously for 0x50000368
*Nov 16 11:45:11.348: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Processing default
action(s) for event SESSION_STARTED for session 0x50000368
*Nov 16 11:45:11.354: RADIUS/ENCODE: Best Local IP-Address 10.48.39.111 for
Radius-Server 10.48.66.74
*Nov 16 11:45:11.354: RADIUS(00000000): Send Access-Request to 10.48.66.74:1645
id 1645/2, len 260
*Nov 16 11:45:11.354: RADIUS: authenticator 86 FC 11 6A 6E 8D A1 0B - A6 98
8B 80 A2 DD A9 69
*Nov 16 11:45:11.354: RADIUS: User-Name [1] 14 "dc7b94a37005"
*Nov 16 11:45:11.354: RADIUS: User-Password [2] 18 *
*Nov 16 11:45:11.354: RADIUS: Service-Type [6] 6 Call Check [10]
*Nov 16 11:45:11.354: RADIUS: Vendor, Cisco [26] 31
*Nov 16 11:45:11.354: RADIUS: Cisco AVpair [1] 25 "service-type=Call Check"
*Nov 16 11:45:11.354: RADIUS: Framed-MTU [12] 6 1500
*Nov 16 11:45:11.354: RADIUS: Called-Station-Id [30] 19 "68-BC-0C-5A-61-01"
*Nov 16 11:45:11.354: RADIUS: Calling-Station-Id [31] 19 "DC-7B-94-A3-70-05"
*Nov 16 11:45:11.354: RADIUS: Message-Authenticato[80] 18
*Nov 16 11:45:11.354: RADIUS: 2D 20 38 B1 DF B6 C1 0C 0D AA 1D 9D E4 3E C8 0B [ - 8>]
*Nov 16 11:45:11.354: RADIUS: EAP-Key-Name [102] 2 *
*Nov 16 11:45:11.354: RADIUS: Vendor, Cisco [26] 49
*Nov 16 11:45:11.354: RADIUS: Cisco AVpair [1] 43 "audit-session-id=
0A30276F0000117D52D8816C"
*Nov 16 11:45:11.355: RADIUS: Vendor, Cisco [26] 18
*Nov 16 11:45:11.355: RADIUS: Cisco AVpair [1] 12 "method=mab"
*Nov 16 11:45:11.355: RADIUS: NAS-IP-Address [4] 6 10.48.39.111
*Nov 16 11:45:11.355: RADIUS: NAS-Port [5] 6 60000
*Nov 16 11:45:11.355: RADIUS: NAS-Port-Id [87] 22 "GigabitEthernet1/0/1"
*Nov 16 11:45:11.355: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
*Nov 16 11:45:11.355: RADIUS(00000000): Sending a IPv4 Radius Packet
*Nov 16 11:45:11.355: RADIUS(00000000): Started 5 sec timeout
*Nov 16 11:45:12.008: RADIUS: Received from id 1645/2 10.48.66.74:1645, Access-Reject,
len 38
*Nov 16 11:45:12.009: RADIUS: authenticator 9D 52 F8 CF 31 46 5A 17 - 4C 45 7E 89 9F
E2 2A 84
*Nov 16 11:45:12.009: RADIUS: Message-Authenticato[80] 18
*Nov 16 11:45:12.009: RADIUS: 11 F4 99 84 9B CC 7C 61 C7 75 7E 70 87 EC 64 8D [ |au~pd]
*Nov 16 11:45:12.009: RADIUS(00000000): Received from id 1645/2
*Nov 16 11:45:12.012: %MAB-5-FAIL: Authentication failed for client (dc7b.94a3.7005)
on Interface Gi1/0/1 AuditSessionID 0A30276F0000117D52D8816C
*Nov 16 11:45:12.013: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Client dc7b.94a3.7005,
Method mab changing state from 'Running' to 'Authc Failed'
*Nov 16 11:45:12.013: AUTH-EVENT: Raised event RX_METHOD_AUTHC_FAIL (6) on handle
0x50000368
*Nov 16 11:45:12.016: EPM_SESS_EVENT: Feature (EPM ACL PLUG-IN) has been
started (status 2)
*Nov 16 11:45:12.016: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC dc7b.94a3.7005| AuditSessionID
0A30276F0000117D52D8816C| EVENT APPLY
*Nov 16 11:45:12.016: %EPM-6-POLICY_APP_SUCCESS: Policy Application succeded for Client
[0.0.0.0] MAC [dc7b.94a3.7005] AuditSession ID [0A30276F0000117D52D8816C] for POLICY_TYPE
[Filter ID] POLICY_NAME [MAB_FAIL_LOCAL_ACL]
Aquí están las depuraciones para el decorado actual. Algunas salidas se omiten para mayor clareza:
<debug command omitted for clarity>
*Nov 16 03:34:28.670: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Processing default
action(s) for event SESSION_STARTED for session 0xCC000363.
*Nov 16 03:34:28.679: RADIUS(00000000): Send Access-Request to 10.48.66.74:1645
id 1645/249, len 260
*Nov 16 03:34:28.679: RADIUS: authenticator CE 06 B0 C4 84 1D 70 82 - B8 66 2F
27 92 73 B7 E7
*Nov 16 03:34:28.679: RADIUS: User-Name [1] 14 "dc7b94a37005"
...
*Nov 16 03:34:29.333: RADIUS: Received from id 1645/249 10.48.66.74:1645, Access-Reject,
len 38
...
*Nov 16 03:34:29.335: %MAB-5-FAIL: Authentication failed for client (dc7b.94a3.7005)
on Interface Gi1/0/1 AuditSessionID 0A30276F0000116851173EFE
*Nov 16 03:34:29.336: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Authc failure from MAB (2),
status Cred Fail (1) / event fail (1)
*Nov 16 03:34:29.339: %EPM-6-AAA: POLICY MAB_FAIL| EVENT DOWNLOAD_REQUEST
*Nov 16 03:34:29.340: EPM_SESS_EVENT: Method list used for download is ISE
*Nov 16 03:34:29.340: RADIUS(00000000): Send Access-Request to 10.48.66.74:1645 id 1645/250,
len 113
*Nov 16 03:34:29.340: RADIUS: authenticator B8 37 70 B0 33 F4 F2 FD - E4 C6 36
2A 4D BD 34 30
*Nov 16 03:34:29.341: RADIUS: NAS-IP-Address [4] 6 10.48.39.111
*Nov 16 03:34:29.341: RADIUS: User-Name [1] 10 "MAB_FAIL"
*Nov 16 03:34:29.341: RADIUS: User-Password [2] 18 *
*Nov 16 03:34:29.341: RADIUS: Vendor, Cisco [26] 41
*Nov 16 03:34:29.341: RADIUS: Cisco AVpair [1] 35 "download-request=
service-template"
*Nov 16 03:34:29.341: RADIUS: Message-Authenticato[80] 18
*Nov 16 03:34:29.341: RADIUS: EF D6 81 F7 5E 03 10 3B 91 EE 36 6E 9D 04
5B F4 [ ^;6n[]
*Nov 16 03:34:29.341: RADIUS(00000000): Sending a IPv4 Radius Packet
*Nov 16 03:34:29.341: RADIUS(00000000): Started 5 sec timeout
*Nov 16 03:34:29.342: EPM_SESS_EVENT: Received IPv4 Binding [ADD] Notification
[GigabitEthernet1/0/48 000c.29f3.ab14 10.48.39.131 1]
*Nov 16 03:34:29.342: EPM_SESS_EVENT: Received IPv4 Binding [ADD] Notification
[GigabitEthernet1/0/48 0050.5699.5350 10.48.39.211 1]
*Nov 16 03:34:29.867: RADIUS: Received from id 1645/250 10.48.66.74:1645,
Access-Accept, len 208
*Nov 16 03:34:29.867: RADIUS: authenticator A3 11 DA 4C 17 7E D3 86 - 06 78
85 5F 84 05 36 0B
*Nov 16 03:34:29.867: RADIUS: User-Name [1] 10 "MAB_FAIL"
*Nov 16 03:34:29.867: RADIUS: State [24] 40
*Nov 16 03:34:29.867: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A
30 61 [ReauthSession:0a]
*Nov 16 03:34:29.867: RADIUS: 33 30 34 32 34 61 30 30 30 30 31 32 30 44
35 32 [30424a0000120D52]
*Nov 16 03:34:29.867: RADIUS: 38 37 34 38 32 45 [ 87482E]
*Nov 16 03:34:29.867: RADIUS: Class [25] 51
*Nov 16 03:34:29.867: RADIUS: 43 41 43 53 3A 30 61 33 30 34 32 34 61 30
30 30 [CACS:0a30424a000]
*Nov 16 03:34:29.868: RADIUS: 30 31 32 30 44 35 32 38 37 34 38 32 45 3A
69 73 [0120D5287482E:is]
*Nov 16 03:34:29.868: RADIUS: 65 32 2F 31 37 33 37 31 31 34 31 36 2F 35
30 30 [e2/173711416/500]
*Nov 16 03:34:29.868: RADIUS: 32 [ 2]
*Nov 16 03:34:29.868: RADIUS: Message-Authenticato[80] 18
*Nov 16 03:34:29.868: RADIUS: 1F 10 85 09 86 2C 5F 87 96 82 C8 3B 09 35 FD
96 [ ,_;5]
*Nov 16 03:34:29.868: RADIUS: Vendor, Cisco [26] 69
*Nov 16 03:34:29.868: RADIUS: Cisco AVpair [1] 63 "ACS:
CiscoSecure-Defined-ACL=#ACSACL#-IP-MAB-FAIL-ACL-528741f3"
*Nov 16 03:34:29.868: RADIUS(00000000): Received from id 1645/250
*Nov 16 03:34:29.869: %EPM-6-AAA: POLICY MAB_FAIL| EVENT DOWNLOAD-SUCCESS
*Nov 16 03:34:29.873: EPM_SESS_EVENT: Added method name ISE
*Nov 16 03:34:29.873: EPM_SESS_EVENT: Attribute CiscoSecure-Defined-ACL is
added to feat EPM ACL PLUG-IN list
*Nov 16 03:34:29.875: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC dc7b.94a3.7005|
AuditSessionID 0A30276F0000116851173EFE| EVENT APPLY
*Nov 16 03:34:29.875: %EPM-6-AAA: POLICY xACSACLx-IP-MAB-FAIL-ACL-528741f3|
EVENT DOWNLOAD_REQUEST
*Nov 16 03:34:29.876: RADIUS(00000000): Send Access-Request to 10.48.66.74:1645
id 1645/251, len 141
*Nov 16 03:34:29.876: RADIUS: authenticator BA 4C 97 06 E9 9E D5 03 - 1C 48
63 E6 94 D7 F8 DB
*Nov 16 03:34:29.876: RADIUS: NAS-IP-Address [4] 6 10.48.39.111
*Nov 16 03:34:29.876: RADIUS: User-Name [1] 35 "#ACSACL#-IP-
MAB-FAIL-ACL-528741f3"
*Nov 16 03:34:29.876: RADIUS: Vendor, Cisco [26] 32
*Nov 16 03:34:29.876: RADIUS: Cisco AVpair [1] 26 "aaa:service=
ip_admission"
*Nov 16 03:34:29.876: RADIUS: Vendor, Cisco [26] 30
*Nov 16 03:34:29.877: RADIUS: Cisco AVpair [1] 24 "aaa:event=
acl-download"
*Nov 16 03:34:29.877: RADIUS: Message-Authenticato[80] 18
*Nov 16 03:34:29.877: RADIUS: B1 4C E4 15 24 06 B4 1D E4 48 60 A0 9F 75
27 29 [ L$H`u')]
*Nov 16 03:34:29.877: RADIUS(00000000): Sending a IPv4 Radius Packet
*Nov 16 03:34:29.877: RADIUS(00000000): Started 5 sec timeout
*Nov 16 03:34:30.533: RADIUS: Received from id 1645/251 10.48.66.74:1645,
Access-Accept, len 202
*Nov 16 03:34:30.533: RADIUS: authenticator FA F9 55 1B 2A E2 32 0F - 33
C6 F9 FF BC C1 BB 7C
*Nov 16 03:34:30.533: RADIUS: User-Name [1] 35 "#ACSACL#-IP-
MAB-FAIL-ACL-528741f3"
*Nov 16 03:34:30.533: RADIUS: State [24] 40
*Nov 16 03:34:30.534: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A
30 61 [ReauthSession:0a]
*Nov 16 03:34:30.534: RADIUS: 33 30 34 32 34 61 30 30 30 30 31 32 30 45
35 32 [30424a0000120E52]
*Nov 16 03:34:30.534: RADIUS: 38 37 34 38 32 45 [ 87482E]
*Nov 16 03:34:30.534: RADIUS: Class [25] 51
*Nov 16 03:34:30.534: RADIUS: 43 41 43 53 3A 30 61 33 30 34 32 34 61 30
30 30 [CACS:0a30424a000]
*Nov 16 03:34:30.534: RADIUS: 30 31 32 30 45 35 32 38 37 34 38 32 45 3A
69 73 [0120E5287482E:is]
*Nov 16 03:34:30.534: RADIUS: 65 32 2F 31 37 33 37 31 31 34 31 36 2F 35
30 30 [e2/173711416/500]
*Nov 16 03:34:30.534: RADIUS: 33 [ 3]
*Nov 16 03:34:30.534: RADIUS: Message-Authenticato[80] 18
*Nov 16 03:34:30.534: RADIUS: 96 9B AC 2C 28 47 25 B1 CF EA BD D0 7D F3
44 34 [ ,(G?}D4]
*Nov 16 03:34:30.534: RADIUS: Vendor, Cisco [26] 38
*Nov 16 03:34:30.534: RADIUS: Cisco AVpair [1] 32 "ip:inacl#1=
permit icmp any any"
*Nov 16 03:34:30.534: RADIUS(00000000): Received from id 1645/251
*Nov 16 03:34:30.535: %EPM-6-AAA: POLICY xACSACLx-IP-MAB-FAIL-ACL-528741f3|
EVENT DOWNLOAD-SUCCESS
*Nov 16 03:34:30.537: EPM_SESS_EVENT: Executed [ip access-list extended
xACSACLx-IP-MAB-FAIL-ACL-528741f3] command through parse_cmd. Result= 0
*Nov 16 03:34:30.538: EPM_SESS_EVENT: Executed [1 permit icmp any any]
command through parse_cmd. Result= 0
*Nov 16 03:34:30.539: EPM_SESS_EVENT: Executed [end] command through parse_cmd.
Result= 0
*Nov 16 03:34:30.541: EPM_SESS_EVENT: ACL xACSACLx-IP-MAB-FAIL-ACL-528741f3
provisioning successful
*Nov 16 03:34:31.136: EPM_SESS_EVENT: Successful feature attrs provided for
SM ACCOUNTING PLUG-IN
*Nov 16 03:34:31.136: EPM_SESS_EVENT: Successful feature attrs provided for
EPM ACL PLUG-IN
*Nov 16 03:34:31.136: AUTH-EVENT: Rcvd IPC call for pre 0x5F000002, inst
0xB2000072, hdl 0x95000073
*Nov 16 03:34:31.136: AUTH-EVENT: Raising ext evt Template Activated (8)
on session 0xCC000363, client (unknown) (0), hdl 0x00000000, attr_list
0xA5000E24
*Nov 16 03:34:31.142: AUTH-EVENT: [dc7b.94a3.7005, Gi1/0/1] Handling external
PRE event Template Activated for context 0xCC000363.
Cuando no hay perfil correcto de la autorización en el ISE, señala:
11001 | Acceso-petición recibida RADIUS | |
11017 | El RADIUS creó una nueva sesión | |
11003 | Acceso-rechazo vuelto RADIUS |
También, se presenta el mensaje fallido de la autenticación del evento 5400, pero se revelan no más de detalles. Después de que usted cree el username con la contraseña cisco123, el error sigue siendo lo mismo, incluso cuando hay reglas correctas de la autenticación/de la autorización. El único requisito de tener que el trabajo de la característica es correctamente tener un perfil correcto de la autorización.
Revisión | Fecha de publicación | Comentarios |
---|---|---|
1.0 |
26-Nov-2013 |
Versión inicial |