Ultra Cloud Clore Subscriber Management Infrastructure

Introduction

This Release Notes identifies changes and issues related to this software release.

Release Lifecycle Milestones

Release Lifecycle Milestone

Milestone

Date

First Customer Ship

FCS

31-Jul-2024

End of Life

EoL

31-Jul-2024

End of Software Maintenance

EoSM

29-Jan-2026

End of Vulnerability and Security Support

EoVSS

29-Jan-2026

Last Date of Support

LDoS

31-Jan-2027

These milestones and the intervals between them are defined in the Cisco Ultra Cloud Core (UCC) Software Release Lifecycle Product Bulletin available on cisco.com.

Release Package Version Information

Software Packages

Version

smi-install-disk.20.04.0-20240709.iso.SPA.tgz

20.04.0-20240709

cee-2024.03.1.13.SPA.tgz

2024.03.1.13

cluster-deployer-2024.03.1.13.SPA.tgz

2024.03.1.13

NED Package

ncs-6.1.3-cisco-cee-nc-2024.03.1.13

ncs-6.1.3-cisco-smi-nc-2024.03.1.13

NSO

6.1.3

Descriptions for the various packages provided with this release are provided in the Release Package Descriptions section.

Verified Compatibility

UCS Server

CIMC Firmware Version

Cisco UCS C220 M7

4.3(3.240022)

Cisco UCS C220 M6

4.2(2a) or later

Cisco UCS C220 M5

4.1(3f) or later

Version 4.3.2.240009 is qualified with this release.

  • For deployment of C-Series M6 and M7 servers, it is mandatory to enable secure boot on the servers.

  • For C-Series M5 servers, it is recommended to use UEFI boot mode and enable secure boot for more security. This will align the older hardware settings with the newer hardware requirements.

What's New in this Release

There are no features or enhancements in this release.

Installation and Upgrade Notes

This Release Note does not contain general installation and upgrade instructions. Refer to the existing installation documentation for specific installation and upgrade considerations.


Note


In this release, you must install a patch to use all SMI functionalities. For more information, contact your Cisco account representative.


Software Integrity Verification

To verify the integrity of the software image you have from Cisco, you can validate the SHA512 checksum information against the checksum identified by Cisco for the software.

Image checksum information is available through Cisco.com Software Download Details. To find the checksum, hover the mouse pointer over the software image you have downloaded.

At the bottom you find the SHA512 checksum, if you do not see the whole checksum you can expand it by pressing the "..." at the end.

To validate the information, calculate a SHA512 checksum using the information in the following table and verify that it matches with the one provided on the software download page.

To calculate a SHA512 checksum on your local desktop, refer to the following table please.

Table 1. Checksum Calculations per Operating System

Operating System

SHA512 Checksum Calculation Command Examples

Microsoft Windows

Open a command line window and type the following command:

> certutil.exe -hashfile <filename>.<extension> SHA512 

Apple MAC

Open a terminal window and type the following command:

$ shasum -a 512 <filename>.<extension> 

Linux

Open a terminal window and type the following command:

$ sha512sum <filename>.<extension> 

Or

$ shasum -a 512 <filename>.<extension> 

NOTES:

<filename> is the name of the file.

<extension> is the file extension (e.g. .zip or .tgz).

If the SHA512 checksum matches, you can be sure that no one has tampered with the software image, or the image has not been corrupted during download.

If the SHA512 checksum does not match, we advise you to not attempt upgrading any systems with the corrupted software image. Download the software again and verify the SHA512 checksum again. If there is a constant mismatch, please open a case with the Cisco Technical Assistance Center.

Certificate Validation

SMI software images are signed via x509 certificates. Please view the .README file packaged with the software for information and instructions on how to validate the certificates.

Open Bugs for this Release

There are no open bugs in this specific software release.

Resolved Bugs for this Release

The following table lists the resolved bugs in this specific software release.


Note


This software release may contain resolved bugs first identified in other releases. Additional information for all resolved bugs are available in the Cisco Bug Search Tool.


Bug ID

Headline

Behavior Change

CSCwk89348

Dual-stack deployment config is invisible

No

Operator Notes

Cloud Native Product Version Numbering System

The show helm list command displays detailed information about the version of the cloud native product currently deployed.

The appropriate version number field increments after a version has been released. The new version numbering format is a contiguous sequential number that represents incremental changes between releases. This format facilitates identifying the changes between releases when using Bug Search Tool to research software releases.

Release Package Descriptions

The following table lists the descriptions for packages that are available with this release.

Table 2. Release Package Information

Software Packages

Description

base.<version>.iso.SPA.tgz

The application-level POD ISO image signature package for use with bare metal deployments. This package contains the base ISO image as well as the release signature, certificate, and verification information.

cee.<version>SPA.tgz

The SMI Common Execution Environment (CEE) offline release signature package. This package contains the CEE deployment package as well as the release signature, certificate, and verification information.

cluster-deployer-<version>.SPA.tgz

The SMI Deployer image signature package for use with bare metal deployments. This package contains the Deployer image as well as the release signature, certificate, and verification information.