Installation Guide for Cisco Unified SIP Proxy Release 9.1.x
Specifications-based Platforms
Virtual Machine Requirements for Cisco Unified SIP Proxy
Downloading the Cisco Unified SIP Proxy OVA
Deploying the Cisco Unified SIP Proxy OVA
Configuring Cisco Unified SIP Proxy Application
Configuring Cisco Unified SIP Proxy using GUI
Configuring Cisco Unified SIP Proxy using CLI
Configuring Cisco Unified SIP Proxy using SSH
Cisco Smart Software Licensing
Cisco Smart Software Manager satellite
Registering Cisco Unified SIP Proxy Instances to satellite
Upgrading from Cisco Unified SIP Proxy Release 9.x to Release 9.1.x
First Published: September 21, 2015
This document provides the technical information that you need to install Cisco Unified SIP Proxy Release 9.1.x and contains the following topics:
This table lists all the changes made to this guide, the most recent changes appearing at the top.
Updated the Cisco UCS-E platform virtual machine requirements table title to include support for the Cisco UCS series with CPU speed less than 2.9 GHz. |
See Virtual Machine Requirements for Cisco Unified SIP Proxy. |
|
In Cisco Unified SIP Proxy, if the Smart Agent Client is disabled via GUI or CLI, none of the calls are processed. Cisco Unified SIP Proxy should have another successful authorization with Cisco Smart Manager to process calls in the AuthorizedPeriodExpired or EvalExpired mode. |
Cisco Unified SIP Proxy Release 9.1.x supports operating within a VMware ESXi virtualized environment. The software is packaged as an OVA for installation within the ESXi environment (5.1 and above). For more information about the ESXi environment, see: http://www.vmware.com/products/vsphere/esxi-and-esx/overview.html
Except the High Availability (HA) feature using Hot Standby Router Protocol (HSRP), Cisco Unified SIP Proxy Virtual application supports all the other features that are supported by Cisco Unified SIP Proxy on a SRE Module.
There are two approaches to select a server for running Cisco Unified SIP Proxy Software within a VMware ESXi environment.
This section provides information about specifications-based server platforms. See Table 1 for information about specifications-based server platforms.
UC Virtualization Supported Hardware https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/collaboration-virtualization-hardware.html |
|
Implementing Virtualization Deployments https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html |
Cisco Unified SIP Proxy Software requires VMware ESXi 5.1 and above. After configuring the server hardware, install VMware vSphere ESXi.
Note Cisco Unified SIP Proxy deployment requires 4 GB RAM and 80 GB disk space.
Table 2 provides the hardware recommendations for virtualized Cisco UCS platform.
Note CPU speed is greater than or equal to 2.99 GHz.
Table 3 provides the hardware recommendations for virtualized low speed Cisco UCS and Cisco UCS (E) platforms.
Note CPU speed is less than 2.99 GHz.
To download the Cisco Unified SIP Proxy Server OVA template (virtual machine template), perform the following steps:
Step 1 Open the Cisco Unified SIP Proxy Server site:
http://www.cisco.com/c/en/us/support/unified-communications/unified-sip-proxy-software/tsd-products-support-series-home.html
Step 2 If prompted, log in, using your Cisco.com user name and password.
Step 3 Locate the OVA in “Download Software” section and download the file.
After downloading the Cisco Unified SIP Proxy OVA, use the following procedure to deploy the virtual machine template.
The following are the prerequisites:
Step 1 In the vCenter vSphere Client GUI, select File > Deploy OVF Template…
The Deploy OVF Template dialog box appears.
Step 2 Browse to the location where Cisco Unified SIP Proxy Server OVA file is downloaded. Click Next.
Step 3 Review and confirm the software image details. Click Next.
Step 4 Enter the name of the device in Name field. The name provided determines how the device appears in the left pane of the vCenter window.
The Deploy OVF Template dialog box displays disk format options.
Note If there are multiple server hosts running ESXi, select the host on which you want Cisco Unified SIP Proxy Server to run. Click Next.
Step 6 Select any of the following Thick provisioning format.
The Deploy OVF Template dialog box displays the available networks.
Step 8 Select the network under Destination Networks column. The selected network is used to communicate with the remote sites.
The Deploy OVF Template dialog box displays a summary of the options that you have configured.
Step 10 Click Finish to deploy Cisco Unified SIP Proxy Server.
A dialog box indicates when the deployment is complete.
Step 11 Select the VM instance, right click and choose Edit Settings....
Virtual Machine Properties dialog box appears.
Step 12 Click the Hardware tab and set the values for memory and vCPU as provided in Table 2 .
Step 13 Click the Resources Tab and select CPU. Adjust the Reservation and Shares to the value provided in Table 2 .
Note Select the Unlimited option if the call flow details and the expected call capacity expected are not clear (this option takes care of cases where the call load is more than the planned load and needs additional CPU resources).
Step 14 Select Memory and change the reservation value as mentioned in the Table 2 .
Note Select the Unlimited option if the call flows details and expected call capacity expected are not clear (this option handles the cases where call load is more than the planned load and needs additional RAM).
Step 15 Save the settings and restart the VM.
Step 16 Select Resource Allocation and confirm the resource reservations.
When you open the first session, the system launches the post installation configuration tool, and asks you if you want to start configuration immediately.
Enter the appropriate response, y or n. If you enter n, the system will halt. If you enter y, the system will ask you to confirm, then begin the interactive post installation configuration process.
Cisco Unified SIP Proxy can be configured in the following ways:
Cisco Unified SIP Proxy can be configured using Graphical User Interface (GUI). The GUI can be accessed by using the IP address provided during installation.
For more information on configuring CUSP using GUI, refer to GUI Configuration Guide for Cisco Unified SIP Proxy Release 9.1. x.
Cisco Unified SIP Proxy can be configured using Command Line Interface (CLI).
For more information on configuring CUSP using CLI, refer to CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x.
Cisco Smart Software Licensing is a standardized licensing platform that facilitates you to deploy and manage Cisco software licenses easily and quickly. Cisco Smart Software Licensing establishes a pool of software licenses that can be used across your network in a flexible and automated manner. It also provides visibility to your purchased and deployed licenses in your network. Cisco Smart Software Licensing removes the need for Product Activation Keys (PAKs) and reduces your license activation and registration time.
You must have a valid account in Cisco Smart Manager to configure smart licensing for Cisco Unified SIP Proxy. By logging into your account in Cisco Smart Manager, you can generate token ID for Cisco Unified SIP Proxy. The generated token ID is unique to your account and it is mandatory to provide the generated token ID during license registration. The Cisco Unified SIP Proxy (Smart Agent) contacts the Cisco Smart Manager (Cisco Datacentre) using Call Home or HTTP protocol and configures the license. Smart licenses can be configured using either Graphical User Interface (GUI) or Command Line Interface (CLI).
Once the smart licensing is enabled and configured using GUI or CLI, the Cisco Unified SIP Proxy sends the entitlement tag, token ID and other required information to the Smart Agent and registers with the Smart Manager (cloud server). The registration is valid for a period of one year. If the registration fails, then Cisco Unified SIP Proxy moves to evaluation mode. In evaluation mode, all features are supported for 90 days. Cisco Unified SIP Proxy stops working after the evaluation period.
After successful registration, the license count and other necessary details are sent to the Smart Manager for authorization. If the authorization is successful, the Cisco Unified SIP Proxy is in authorized state. If the requested number of licenses is within the purchased license count, Licensing Agent state moves to InCompliance state. If the requested number of licenses is more than the purchased licenses, Licensing Agent state moves to OutofCompliance state.
The authorization is renewed automatically every 30 days without the intervention of the users. In case the authorization renewal fails for 90 days, Cisco Unified SIP Proxy moves to the authorization expiry state. In this state, Cisco Unified SIP Proxy continues to receive all the calls. But, at the same time, the Smart Agent retries to renew the authorization every four hours to establish a new registration period. Also, if you have a valid license, calls are not rejected when the calls-per-second exceeds the purchased license count. Since the Cisco Unified SIP Proxy is successfully authorized once, all calls are processed in the AuthorizedPeriodExpired or EvalExpired mode. In the event where the Smart Agent Client is disabled using GUI or CLI, none of the calls are processed. In this case, Cisco Unified SIP Proxy should have another successful authorization with Cisco Smart Manager to process calls in the AuthorizedPeriodExpired or EvalExpired mode.
For information on configuring smart licenses using GUI and CLI refer to GUI Configuration Guide for Cisco Unified SIP Proxy Release 9.1. x and CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x.
Cisco Smart Software Manager satellite is a component of Cisco Smart Licensing and works with Cisco Smart Software Manager (CSSM). It helps customers intelligently manage product licenses, providing near real-time visibility and reporting of the Cisco licenses they purchase and consume. From release 9.1.5 onwards, Cisco Unified SIP Proxy supports Cisco Smart Software Manager satellite version 3.0.0.
For security-sensitive customers who do not want to manage their installed Cisco Unified SIP Proxy using a direct Internet connection, the Smart Software Manager satellite is installed on the customer premises and provided a subset of CSSM functionality. The satellite needs to synchronize with CSSM to reflect the latest license entitlements periodically. The satellite registration process is immediate. Cisco Unified SIP Proxy can register to the Smart Software Manager satellite directly as though it were a replicate of the Smart Software Manager in one of the following methods:
Note Customers need to synchronize their local databases with the Cisco portal to make sure that the most recent purchases are reflected in their local copies.
For information on deploying, installing, and managing Smart Software Manager satellite, see Smart Software Manager satellite Installation Guide.
For support on installation of the satellite or other synchronization issues, contact the satellite team at: mailto:cs-cssm-satellite@cisco.com.
Once the satellite is operational, smart-enabled Cisco Unified SIP Proxy instances can register to the satellite. The Cisco Unified SIP Proxy contacts the Cisco Smart Software Manager satellite using the HTTP or HTTPS protocol and configures the license.
Smart-enabled Cisco Unified SIP Proxy instances register to satellite via Graphical User Interface (GUI) or Command Line Interface (CLI). Once the smart licensing is enabled and configured using GUI or CLI, the Cisco Unified SIP Proxy sends the entitlement tag, token ID, and other required information to the satellite which in turn registers with the Cisco SSM. The registration is valid for one year. If the registration fails, then Cisco Unified SIP Proxy moves to evaluation mode. In evaluation mode, all features are supported for 90 days. Cisco Unified SIP Proxy stops working after the evaluation period.
After successful registration, the license count and other necessary details are sent to the Smart Manager for authorization. If the authorization is successful, the Cisco Unified SIP Proxy is in authorized state. If the requested number of licenses is within the purchased license count, Licensing Agent state moves to InCompliance state. If the requested number of licenses is more than the purchased licenses, Licensing Agent state moves to OutofCompliance state.
The authorization is renewed automatically every 30 days without the intervention of the users. In case the authorization renewal fails for 90 days, Cisco Unified SIP Proxy moves to the authorization expiry state. In this state, Cisco Unified SIP Proxy continues to receive all the calls. But, at the same time, the Smart Agent retries to renew the authorization every four hours to establish a new registration period. Also, if you have a valid license, calls are not rejected when the calls-per-second exceeds the purchased license count. Since the Cisco Unified SIP Proxy is successfully authorized once, all calls are processed in the AuthorizedPeriodExpired or EvalExpired mode. In the event where the Smart Agent Client is disabled using GUI or CLI, none of the calls are processed. In this case, Cisco Unified SIP Proxy should have another successful authorization with Cisco Smart Manager to process calls in the AuthorizedPeriodExpired or EvalExpired mode.
For information on configuring smart licenses using GUI and CLI refer to GUI Configuration Guide for Cisco Unified SIP Proxy Release 9.1. x and CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x.
You can upgrade your system from Cisco Unified SIP Proxy Release 9.x to Release 9.1.x.
A clean install wipes out all configuration and data; therefore, you must back up your configuration first. After you install the new system, you restore the configuration and data. Use the information in this section along with the other configuration sections in this guide.
Note Although a best effort has been made to ensure backward compatibility, we recommend that you thoroughly inspect the backed up configuration to ensure that the data was not compromised.
2. write [erase | memory | terminal]
4. backup {revisions number | server url ftp-url username ftp-username password ftp-password }
5. backup category {all | configuration | data}
7. Deploy the Cisco Unified SIP Proxy Release 9.1.x OVA on a virtual machine and perform the mandatory configurations. For more information, see the “Initial Configuration Tasks” chapter in CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x.
8. Configure Smart Licensing. Refer to GUI Configuration Guide for Cisco Unified SIP Proxy Release 9.1. x and CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x for more information.
9. restore id backup-id category {all | configuration | data}
Enables the Cisco Unified SIP Proxy committable configuration changes to take effect. |
||
Writes the running configuration to the startup configuration. |
||
!!!WARNING!!!: Putting the system offline will terminate all active calls. |
Enters offline mode. All calls are terminated. Note Cisco Unified SIP Proxy still routes calls in offline mode. |
|
backup {revisions number | server url ftp-url username ftp-username password ftp-password} se-10-0-0-0(offline)# backup server url ftp://192.1.1.1/ username <ftp-username> password <ftp-password> |
||
Exits offline mode and returns the system to the previous online mode. The system begins processing new calls. |
||
Deploy the Cisco Unified SIP Proxy Release 9.1.x OVA on a virtual machine and perform the mandatory configurations. |
Installs the Cisco Unified SIP Proxy Release 9.1.x image onto a system that has a Release 9.x image. For more information, see the “Initial Configuration Tasks” chapter in CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x. |
|
Configure Smart Software Licensing which is a standardized licensing platform that facilitates you to deploy and manage Cisco software licenses easily and quickly. Refer to GUI Configuration Guide for Cisco Unified SIP Proxy Release 9.1. x and CLI Configuration Guide for Cisco Unified SIP Proxy Release 9.1.x for more information. |
||
Specifies the backup ID value and the file type to be restored. |
||
Activates the uploaded file information and restarts the Cisco Unified SIP Proxy system. |