1

LED bar

The phone screen displays the current state and the LED bar displays:

• Green, solid—Active call

• Green, flashing—Incoming call

• Green, pulsing—Held call

• Red, solid—Muted call

2

Visual notification of phone state and message-waiting indicator

The phone screen displays the current state.

When you have a message, a message is displayed on the phone screen. Your phone also provides an audible message-waiting indicator.

To change the audible voice-message indicator, sign in to the Self Care portal and access the message-indicator settings. You can change each setting to on or off.

Your administrator can also change your settings.

3

Adjustable ringtone, pitch, and volume

• Select Settings > Preferences to change the ringtone.

• Adjust the volume level for the phone ring. When not in a call, press Volume to raise or lower the volume.

  When you adjust the volume, the LED bar lights white to show the volume increase or decrease.

Your administrator can also change your settings.

1

LED bar

The phone screen displays the current state and the LED bar displays:

• Green, solid—Active call

• Green, flashing—Incoming call

• Green, pulsing—Held call

• Red, solid—Muted call

2

Visual notification of phone state and message-waiting indicator

The phone screen displays the current state.

When you have a message, a message is displayed on the phone screen. Your phone also provides an audible message-waiting indicator.

3

Adjustable ringtone, pitch, and volume

• Select Settings > User preferences > Ringtone to change the ringtone.

• Adjust the volume level for the phone ring. When not in a call, press Volume to raise or lower the volume.

  When you adjust the volume, the LED bar lights white to show the volume increase or decrease.

Your administrator can also change your settings.

1

High-contrast visual and audible alert of incoming call with the LED bar

• The LED bar is located above the Mute button and the screen.

Use the Mute button to toggle the microphone on or off. When the microphone is muted, the LED bar lights red. When you turn on Mute, your phone beeps once; when you turn off Mute, your phone beeps twice.

2

Mute button

• This button is located between the LED bar and the screen.

Alerts you to an incoming call. The LED flashes during incoming calls.

Colors indicate your phone's status:

• Green, solid—Active call

• Green, flashing—Incoming call

• Green, pulsing—Held call

• Red, solid—Muted call

3

Softkeys

• These are buttons just below the LCD.

Provide access to special functions. The LCD displays the functions.

4

Navigation cluster (includes the Navigation bar and the Select button)

• The Navigation cluster is located to the right of the keypad.

Use the Navigation bar to move up and down in the phone LCD. The Select button is in the center of the Navigation bar.

5

Standard 12-key layout

Allows you to use existing or familiar key positions. Key 5 has a nib.

6

Volume key

• This key is located to the left of the keypad.

Allows you to increase or decrease the ring volume or the sound.

Press up on the rocker key to increase the volume. Press down on the rocker key to decrease the volume.

When you adjust the volume, the LED bar lights white to show the volume increase or decrease.

1

LED bar

Indicates your phone's status:

• Green, solid—Active call

• Green, flashing—Incoming call

• Green, pulsing—Held call

• Red, solid—Muted call

2

Tactile-discernible buttons and functions, including a nib on Key 5

Allow you to easily locate your phone's keys. For example, Key 5 has a nib, which you can use to locate other key positions.

Programmable Line Key (PLK)

You can use the line buttons to initiate, answer, or switch to a call on a particular line. A limited number of features, such as speed dial, extension mobility, privacy, Busy Lamp Field (BLF) speed dial, Do Not Disturb (DND), and Service URLs, get assigned to these buttons.

The PLK feature expands the features that can be assigned to the line buttons to include those that softkeys normally control; for example New Call, Call Back, End Call, and Forward All. When these features are configured on the line buttons, they are always visible, so you can have a “hard” New Call key.

You can access features easily that may be assigned to softkeys normally, which can be too small and difficult to use.

Standard on all Cisco IP Phones; configuration is required.

Your administrator assigns PLKs to your phone.

Audible Message Waiting Indicator (AMWI)

Cisco Unified IP Phones can send a line-specific stutter dial tone when a voice message is waiting on the phone. You hear it only when using the line with the waiting messages. When you go off hook (on the line for which a voice message has been left), the stutter dial tone is heard.

You can change the audible voice-message indicator setting by logging in to your phone support pages, and changing the audible message-indicator setting to On or Off.

Standard on all Cisco IP Phones.

Configuration is required:

• administrator

• phone support pages

Do Not Disturb (Alert and Reject)

Your administrator configures the phone to turn on all audible and visual notifications, turn on ringer only, or to choose the type of alert a phone should play for incoming calls.

Standard on all Cisco IP Phones; configuration is required.

Busy Lamp Field

You can use the Busy Lamp Field (BLF) feature to monitor the call state of a directory number (DN) associated with a speed-dial button, call log, or directory listing on the phone.

In addition, you can use BLF pickup to monitor incoming calls on a directory number.

When the DN receives an incoming call, the system alerts the you so that you can then pick up the call.

Standard on all Cisco IP Phones; configuration is required.

Phone support pages:

• User Options web pages (Cisco Unified CM 9.1 and earlier)

• Self Care Portal (Cisco Unified CM 10.0 and later)

The Cisco IP Phone is a network device that enables you to do the following actions:

• Share information with other network devices in your company, including your personal computer.

• Use your computer to log in to your phone support pages, where you can subscribe to services, set up speed dial and call forwarding numbers, configure ring settings, and create a personal address book.

Standard on all Cisco IP Phones; configuration is required.