UCS X-Series M7 X-Direct Xccelerate Offer Ordering Guide
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Cisco UCS X-Series Direct transforms the Cisco UCS X-Series Modular System into a self-contained system with pair of internal Cisco UCS Fabric Interconnects 9108 100G that integrate each of up to eight server nodes with Cisco unified fabric connectivity, upstream IP and Fibre Channel connectivity, all managed through Cisco Intersight or the time-proven Cisco UCS Manager.
The Cisco UCS X-Series Direct is designed to shift your thinking from administrative details to business outcomes-with infrastructure that is assembled from the cloud, shaped to your workloads, and continuously optimized. Now that hardware can think and change like software, you are free to think like tomorrow. This brings about immense simplification to edge applications:
● Simplify with cloud-operated infrastructure: By shaping system resources to workload requirements with Cisco Intersight, you can deliver intelligent visualization, optimization, and orchestration to all your applications and infrastructure.
● Simplify with an adaptable platform: Edge applications have widely varying requirements. At the edge, you can use a single platform that combines the density and efficiency of blade servers with the expandability of rack servers for better performance, automation, and efficiency.
● Simplify with a system engineered for the future: Embrace emerging technology and reduce risk with a modular system engineered to support future generations of processor, accelerator, and interconnects with management enabled by a constant stream of new capabilities delivered as Software-as-a-Service (SaaS).
Purpose
This document describes how to order the UCS X-Series M7 X-Direct Xccelerate Offer.
Scope
This ordering guide describes the information for:
● Ordering Structure of Cisco UCS X-Series M7 X-Direct Xccelerate Offer
● Catalog of Product IDs
● Ordering Server Hardware and Software options
● Links to additional resources
Audience
Buy Method Through Cisco (Eg: Direct Customer & Tier 1 Partners):
● Scenario 1: Customer Without Enterprise Agreement for Cisco Intersight Software License
● Scenario 2: Customer With Enterprise Agreement for Cisco Intersight Software License
Buy Method Through Distributor (Eg: Tier 1 & Tier 2 Partners):
● Scenario 1: Customer Without Enterprise Agreement for Cisco Intersight Software License
● Scenario 2: Customer With Enterprise Agreement for Cisco Intersight Software License
Ordering Structure of UCS X-Series M7 X-Direct Xccelerate Offer
Note: For a complete list of part numbers for the see the Cisco Cisco UCS Fabric Interconnect 9108 100G Spec Sheet, Cisco UCS X9508 Chassis Spec Sheet and Cisco UCS X210c M7 Compute Node Spec Sheet
Table 1. PID of Major Line Bundle (MLB)
| Product ID (PID) |
Description |
| UCSX-M7-XDIRECTXCC |
UCS-X M7 X-Direct XCcelerate Offer | Subject to approval |
Table 2. Cisco Compute Hyperconverged Chassis Major Line PIDs
| Product ID (PID) |
Description |
| UCSX-9508-FREE |
Cisco UCS 9508 Chassis Configured |
Table 3. Cisco Compute Hyperconverged Server node Major Line PIDs
| Product ID (PID) |
Description |
| UCSX-210C-M7-U (Paid Node) |
Cisco UCS X210c M7 Compute Node 2S Intel 4th Gen CPU without CPU, memory, drive bays, drives, VIC adapter, or mezzanine adapters (Paid Node) |
| UCSX-210C-M7-NEW (Free Node) |
Cisco UCS X210c M7 Compute Node 2S Intel 4th Gen CPU without CPU, memory, drive bays, drives, VIC adapter, or mezzanine adapters (Free Node) |
Table 4. Cisco Intersight Major Line PIDs
| Product ID (PID) |
Description |
| DC-MGT-SAAS |
Cisco Intersight SaaS |
| CNDL-DESELECT-D |
Conditional Deselect |
Buy Method Through Cisco (Eg: Direct Customer & Tier 1 Partners)
Scenario 1: Customer Without Enterprise Agreement for Cisco Intersight Software License
Step 1.
a. In CCW, search for MLB PID and click on “Add”
b. Click on “Select Options” to enter the configurator.
Step 2.
a. Free Chassis: UCSX-9508-FREE is preselected and can only be selected with 1 QTY
b. Notice the UCSX-9508-FREE ATO Status is invalid as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 3.
a. Pair of Fabric Interconnect Module and Power Supply are auto-included for free in the configuration and Software License: UCSX-S9108-SW is preselected at price.
b. Configure UCSX-9508-FREE by selecting Power Cable from category window on the left.
c. Click on “Done”
Step 4.
a. Note Status is now showing as Valid.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 5.
a. Enter the Term Duration
b. Click on “Apply” and “Done”
Step 6.
a. Paid Server: UCSX-210C-M7-U is preselected with 5 QTY under MLB and can be selected up to 7 QTY.
b. Notice the UCSX-210C-M7-U ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 7.
a. Configure UCSX-210C-M7-U by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 8.
a. Note Status is now showing as “Valid”.
b. Increase the quantity for multiples of same configuration.
c. Click the “PLUS” to add and configure the same product with different option/quantities or select a different product.
Step 9.
a. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 10.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 11.
a. Free Server: UCSX-210C-M7-NEW is preselected and can only be selected with 1 QTY.
b. Notice the UCSX-210C-M7 -NEW ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Note: Configuration of at least 5 Paid Servers and 1 Free Server should be identical.
Step 12.
a. Configure UCSX-210C-M7-NEW by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 13.
a. Note Status is now showing as “Valid”.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 14.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 15.
a. It is recommended that Term Duration for HW Support align with Software Subscription Duration.
b. Intersight is a required selection if you have not previously purchased Cisco Intersight Software. Please make selection by clicking “PLUS”. Click on “Edit Options” to configure.
Step 16.
a. Requested Start Date (RSD) is now dependent on HW Ship Date and will automatically starts when the HW ships. If you change the RSD, the Software will start either on the RSD you picked or the HW Ship Date whichever is later.
b. End Date (duration in months) is defaulted to 36 Months, Auto Renewal (on/off) is defaulted to On and Billing Frequency is defaulted to Prepaid Term. You can still change the setting accordingly.
Step 17.
a. The quantity of Cisco Intersight 2.0 Infrastructure Services License under Offer: DC-MGT-SAAS should be equal to the quantity of Server selected. Enter the quantity.
Step 18.
a. The Cisco Intersight License comes with separate Support. Basic Embedded Support is the default selection. It is recommended that Customer should upgrade to Solution Support or CX Success Track L1 or L2 for the HW.
Step 19.
a. Configuration for MLB is completed when status of each Product is Valid and warning messages are cleared.
b. Click on the “PLUS” to expand and view the selections made for each Product.
c. Click on the “DONE” to complete the MLB Configuration.
Scenario 2: Customer With Enterprise Agreement for Cisco Intersight Software License
Step 1.
a. In CCW, search for MLB PID and click on “Add”
b. Click on “Select Options” to enter the configurator.
Step 2.
a. Free Chassis: UCSX-9508-FREE is preselected and can only be selected with 1 QTY
b. Notice the UCSX-9508-FREE ATO Status is invalid as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 3.
a. Pair of Fabric Interconnect Module and Power Supply are auto-included for free in the configuration and Software License: UCSX-S9108-SW is preselected at price.
b. Configure UCSX-9508-FREE by selecting Power Cable from category window on the left.
c. Click on “Done”
Step 4.
a. Note Status is now showing as Valid.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 5.
a. Enter the Term Duration
b. Click on “Apply” and “Done”
Step 6.
a. Paid Server: UCSX-210C-M7-U is preselected with 5 QTY under MLB and can be selected up to 7 QTY.
b. Notice the UCSX-210C-M7-U ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 7.
a. Configure UCSX-210C-M7-U by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 8.
a. Note Status is now showing as “Valid”.
b. Increase the quantity for multiples of same configuration.
c. Click the “PLUS” to add and configure the same product with different option/quantities or select a different product.
Step 9.
a. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 10.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 11.
a. Free Server: UCSX-210C-M7-NEW is preselected and can only be selected with 1 QTY.
b. Notice the UCSX-210C-M7 -NEW ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Note: Configuration of at least 5 Paid Servers and 1 Free Server should be identical.
Step 12.
a. Configure UCSX-210C-M7-NEW by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 13.
a. Note Status is now showing as “Valid”.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 14.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 15.
a. CNDL-DESELECT-D is meant to select only if Customer has already purchased Cisco Intersight License via EA Contract or order is for Disti Fulfillment.
Step 16.
a. Please select appropriate Reason Code
Step 17.
a. Configuration for MLB is completed when status of each Product is Valid and warning messages are cleared.
b. Click on the “PLUS” to expand and view the selections made for each Product.
c. Click on the “DONE” to complete the MLB Configuration.
Buy Method Through Distributor (Eg: Direct Customer & Tier 1 Partners)
Scenario 1: Customer Without Enterprise Agreement for Cisco Intersight Software License
Step 1.
a. In CCW, search for MLB PID and click on “Add”
b. Click on “Select Options” to enter the configurator.
Step 2.
a. Free Chassis: UCSX-9508-FREE is preselected and can only be selected with 1 QTY
b. Notice the UCSX-9508-FREE ATO Status is invalid as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 3.
a. Pair of Fabric Interconnect Module and Power Supply are auto-included for free in the configuration and Software License: UCSX-S9108-SW is preselected at price.
b. Configure UCSX-9508-FREE by selecting Power Cable from category window on the left.
c. Click on “Done”
Step 4.
a. Note Status is now showing as Valid.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 5.
a. Enter the Term Duration
b. Click on “Apply” and “Done”
Step 6.
a. Paid Server: UCSX-210C-M7-U is preselected with 5 QTY under MLB and can be selected up to 7 QTY.
b. Notice the UCSX-210C-M7-U ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 7.
a. Configure UCSX-210C-M7-U by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 8.
a. Note Status is now showing as “Valid”.
b. Increase the quantity for multiples of same configuration.
c. Click the “PLUS” to add and configure the same product with different option/quantities or select a different product.
Step 9.
a. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 10.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 11.
a. Free Server: UCSX-210C-M7-NEW is preselected and can only be selected with 1 QTY.
b. Notice the UCSX-210C-M7 -NEW ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Note: Configuration of at least 5 Paid Servers and 1 Free Server should be identical.
Step 12.
a. Configure UCSX-210C-M7-NEW by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 13.
a. Note Status is now showing as “Valid”.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 14.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 15.
a. CNDL-DESELECT-D is meant to select only if Customer has already purchased Cisco Intersight License via EA Contract or order is for Disti Fulfillment.
b. Please note that Intersight is required selection and needed for the M7 Server to function. All orders with CNDL-DESELECT-D will be manually reviewed for Compliance.
Step 16.
a. Please select appropriate Reason Code
Step 17.
a. Configuration for MLB is completed when status of each Product is Valid and warning messages are cleared.
b. Click on the “PLUS” to expand and view the selections made for each Product.
c. Click on the “DONE” to complete the MLB Configuration.
Step 18.
a. In CCW, search for DC-MGT-SAAS and click on “ADD”.
b. Intersight is a required selection, if you have not previously purchased Cisco Intersight Software. Click on Select Options to enter the configurator.
Step 19.
a. The quantity of Cisco Intersight 2.0 Infrastructure Services License under Offer: DC-MGT-SAAS should be equal to the quantity of Server selected. Enter the quantity.
Step 20.
a. Requested Start Date (RSD) It is recommended that when you book your SaaS Product, you select a Request Start Date (RSD) 90 days into the future.
b. End Date (duration in months) is defaulted to 36 Months, Auto Renewal (on/off) is defaulted to On and Billing Frequency is defaulted to Prepaid Term. You can still change the setting accordingly.
Step 21.
a. The quantity of Cisco Intersight 2.0 Infrastructure Services License under Offer: DC-MGT-SAAS should be equal to the quantity of Server selected. Enter the quantity.
Step 22.
a. The Cisco Intersight License comes with separate Support. Basic Embedded Support is the default selection. It is recommended that Customer should upgrade to Solution Support or CX Success Track L1 or L2 for the HW.
Step 23.
a. Configuration for UCSX-M7-XDIRECTXCC and DC-MGT-SAAS is now completed, and status of each Product is Valid..
b. Click on the “PLUS” to expand and view the selections made for each Product.
Scenario 2: Customer With Enterprise Agreement for Cisco Intersight Software License
Step 1.
a. In CCW, search for MLB PID and click on “Add”
b. Click on “Select Options” to enter the configurator.
Step 2.
a. Free Chassis: UCSX-9508-FREE is preselected and can only be selected with 1 QTY
b. Notice the UCSX-9508-FREE ATO Status is invalid as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 3.
a. Pair of Fabric Interconnect Module and Power Supply are auto-included for free in the configuration and Software License: UCSX-S9108-SW is preselected at price.
b. Configure UCSX-9508-FREE by selecting Power Cable from category window on the left.
c. Click on “Done”
Step 4.
a. Note Status is now showing as Valid.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 5.
a. Enter the Term Duration
b. Click on “Apply” and “Done”
Step 6.
a. Paid Server: UCSX-210C-M7-U is preselected with 5 QTY under MLB and can be selected up to 7 QTY.
b. Notice the UCSX-210C-M7-U ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Step 7.
a. Configure UCSX-210C-M7-U by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 8.
a. Note Status is now showing as “Valid”.
b. Increase the quantity for multiples of same configuration.
c. Click the “PLUS” to add and configure the same product with different option/quantities or select a different product.
Step 9.
a. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 10.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 11.
a. Free Server: UCSX-210C-M7-NEW is preselected and can only be selected with 1 QTY.
b. Notice the UCSX-210C-M7 -NEW ATO Status is “invalid” as further configuration needed.
c. Click on “Edit Options” to enter the configurator.
Note: Configuration of at least 5 Paid Servers and 1 Free Server should be identical.
Step 12.
a. Configure UCSX-210C-M7-NEW by selecting peripherals from category window on the left.
b. PIDs are listed in the window on the right. Some PIDs like CPUs, Memory and Drives are grouped according to type or series; select from the grouped options located above SKU window on the right.
c. Follow warning messages to configure the minimum required option PIDs.
d. Click on “Done” when completed.
Step 13.
a. Note Status is now showing as “Valid”.
b. Click on “Edit Services/Subscriptions” to edit Term Duration for HW Support.
Note: It is recommended that Term Duration for HW Support must align with Software Subscription Duration.
Step 14.
a. Enter the Term Duration.
b. Click on “Apply” and “Done”
Step 15.
a. CNDL-DESELECT-D is meant to select only if Customer has already purchased Cisco Intersight License via EA Contract or order is for Disti Fulfillment.
b. Please note that Intersight is required selection and needed for the M7 Server to function. All orders with CNDL-DESELECT-D will be manually reviewed for Compliance.
Step 16.
a. Please select appropriate Reason Code
Step 17.
a. Configuration for MLB is completed when status of each Product is Valid and warning messages are cleared.
b. Click on the “PLUS” to expand and view the selections made for each Product.
c. Click on the “DONE” to complete the MLB Configuration.