Cisco Firepower 4100/9300 FXOS Release Notes, 2.8(1)
This document contains release information for Cisco Firepower eXtensible Operating System (FXOS) 2.8(1).
Use these Release Notes as a supplement with the other documents listed in the documentation roadmap:
Note |
The online versions of the user documentation are occasionally updated after the initial release. As a result, the information contained in the documentation on Cisco.com supersedes any information contained in the context-sensitive help included with the product. |
Introduction
The Cisco security appliance is a next-generation platform for network and content security solutions. The security appliance is part of the Cisco Application Centric Infrastructure (ACI) Security Solution and provides an agile, open, secure platform that is built for scalability, consistent control, and simplified management.
The security appliance provides the following features:
-
Modular chassis-based security system—Provides high performance, flexible input/output configurations, and scalability.
-
Firepower Chassis Manager—Graphical user interface provides a streamlined, visual representation of the current chassis status and allows for simplified configuration of chassis features.
-
FXOS CLI—Provides command-based interface for configuring features, monitoring chassis status, and accessing advanced troubleshooting features.
-
FXOS REST API—Allows users to programmatically configure and manage their chassis.
What’s New
New Features in FXOS 2.8.1.198
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.198).
New Features in FXOS 2.8.1.190
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.190).
New Features in FXOS 2.8.1.186
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.186).
New Features in FXOS 2.8.1.172
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.172).
New Features in FXOS 2.8.1.164
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.164).
New Features in FXOS 2.8.1.162
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.162).
New Features in FXOS 2.8.1.152
Fixes for various problems (see Resolved Bugs in FXOS 2.8.2.152).
New Features in FXOS 2.8.1.143
Fixes for various problems (see Resolved Bugs in FXOS 2.8.1.143).
New Features in FXOS 2.8.1.139
Fixes for various problems (see Resolved Bugs in FXOS 2.8.1.139).
New Features in FXOS 2.8.1.125
Fixes for various problems (see Resolved Bugs in FXOS 2.8.1.125).
Cisco FXOS 2.8.1 introduces the following new features:
Feature |
Description |
---|---|
Support for Firepower 4112 security appliances |
For more information about Firepower 4112 security appliances, see the Cisco Firepower 4112, 4115, 4125, and 4145 Hardware Installation Guide |
Support for Firepower Threat Defense 6.6 |
For more information about Firepower 6.6, see the Cisco Firepower Release Notes, Version 6.6.0. |
Support for ASA 9.14(1) |
For more information about ASA 9.14(1), see the Release Notes for the Cisco ASA Series, 9. |
FXOS API Explorer |
The FXOS REST API, available on the Firepower chassis, includes an API Explorer that describes the resources and JSON objects available for your programmatic use. The Explorer provides information about the attribute-value pairs in each object, and you can “try out” the various HTTP methods in real time. To access the FXOS API Explorer, either navigate to Help > API Explorer in the Firepower Chassis Manager interface, or edit the Firepower Chassis Manager URL to point to |
Support for VLAN 2.8.1 subinterfaces on a cluster type interface (multi-instance use only) |
For use with multi-instance clusters, you can now create VLAN subinterfaces on cluster type interfaces. Because each cluster requires a unique cluster control link, VLAN subinterfaces provide a simple method to fulfill this requirement. You can alternatively assign a dedicated EtherChannel per cluster. Multiple cluster type interfaces are now allowed. |
Firepower Chassis Manager changes for combined FXOS FPRM and FXOS Chassis Tech Support troubleshooting logs |
The information logged in the FXOS FPRM and FXOS Chassis Tech Support logs are now combined. You can now view all FPRM and tech support log information using the tech-support chassis 1 detail command. Note the following FXOS CLI and Chassis Manager interface changes:
|
Ability to disable auto-negotiation on 1G optical SFP ports for Firepower 4100/9300 |
You can now disable auto-negotiation on 1G optical SFP ports for Firepower 4100 and 9300 devices by switching between [Yes] and [No] on the port. |
SSH server support for ECDSA |
The Firepower 4100/9300 FXOS CLI now has the following support:
|
Fixes for various problems |
For more information, see Resolved Bugs in FXOS 2.8.1.105. |
Software Download
You can download software images for FXOS and supported applications from one of the following URLs:
-
Firepower 9300 — https://software.cisco.com/download/type.html?mdfid=286287252
-
Firepower 4100 — https://software.cisco.com/download/navigator.html?mdfid=286305164
For information about the applications that are supported on a specific version of FXOS, see the Cisco FXOS Compatibility guide at this URL:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/compatibility/fxos-compatibility.html
Important Notes
-
In FXOS 2.4(1) or later, if you are using an IPSec secure channel in FIPS mode, the IPSec peer entity must support RFC 7427.
-
When you configure Radware DefensePro (vDP) in a service chain on a currently running Firepower Threat Defense application on a Firepower 4110 or 4120 device, the installation fails with a fault alarm. As a workaround, stop the Firepower Threat Defense application instance before installing the Radware DefensePro application.
Note
This issue and workaround apply to all supported releases of Radware DefensePro service chaining with Firepower Threat Defense on Firepower 4110 and 4120 devices.
-
Attention
The FXOS 2.8.1.162 image is fully supported if it is already installed on your security appliance. However, based on the fix for CSCvy95497, the FXOS 2.8.1.162 image was removed and replaced with the image FXOS 2.8.1.164 to avoid any issues or confusions arising out of this bug.
For information about how to install a firmware update and the fixes included in each update, see Cisco Firepower 4100/9300 FXOS Firmware Upgrade Guide.
-
When you upgrade a network or security module, certain faults are generated and then cleared automatically. These include a “hot swap not supported” fault or a “module removed when in online state” fault. If you have followed the appropriate procedures, as described in the Cisco Firepower 9300 Hardware Installation Guide or Cisco Firepower 4100 Series Hardware Installation Guide, the fault(s) are cleared automatically and no additional action is required.
System Requirements
-
You can access the Firepower Chassis Manager using the following browsers:
-
Mozilla Firefox—Version 42 and later
-
Google Chrome—Version 47 and later
-
Microsoft Internet Explorer—Version 11 and later
We tested FXOS 2.8(1) using Mozilla Firefox version 42, Google Chrome version 47, and Internet Explorer version 11. Other versions of these browsers are expected to work. However, if you experience any browser-related issues, we suggest you use one of the tested versions.
-
Upgrade Instructions
You can upgrade your Firepower 9300 or Firepower 4100 series security appliance to FXOS 2.8(1) if it is currently running any FXOS 2.0(1) or later build.
For upgrade instructions, see the Cisco Firepower 4100/9300 Upgrade Guide.
Installation Notes
-
An upgrade to FXOS 2.8(1) can take up to 45 minutes. Plan your upgrade activity accordingly.
-
If you are upgrading a Firepower 9300 or Firepower 4100 series security appliance that is running a standalone logical device or if you are upgrading a Firepower 9300 security appliance that is running an intra-chassis cluster, traffic does not traverse through the device while it is upgrading.
-
If you are upgrading a Firepower 9300 or a Firepower 4100 series security appliance that is part of an inter-chassis cluster, traffic does not traverse through the device being upgraded while it is upgrading. However, the other devices in the cluster continue to pass traffic.
-
Downgrade of FXOS images is not officially supported. The only Cisco-supported method of downgrading an image version of FXOS is to perform a complete re-image of the device.
Adapter Bootloader Upgrade
FXOS 2.8(1) provides additional testing to verify the security module adapters on your security appliance. After installing FXOS 2.4.1.101 or later, you might receive a critical fault similar to the following indicating that you should update the firmware for your security module adapter:
Critical F1715 2017-05-11T11:43:33.121 339561 Adapter 1 on Security Module 1 requires a critical firmware upgrade. Please see Adapter Bootloader Upgrade instructions in the FXOS Release Notes posted with this release.
If you receive this, use the following procedure to update the boot image for your adapter. Note that this procedure may result in a traffic disruption, and thus should be performed during a maintenance window to avoid business impact.
-
Connect to the FXOS CLI on your Firepower security appliance. For instructions, see the “Accessing the FXOS CLI” topic in the Cisco Firepower 4100/9300 FXOS CLI Configuration Guide, 2.8(1) or Cisco Firepower 4100/9300 FXOS Firepower Chassis Manager Configuration Guide, 2.8(1).
-
Enter the adapter mode for the adapter whose boot image you are updating:
fxos-chassis# scope adapter 1/security_module_number/adapter_number
-
Enter show image to view the available adapter images and to verify that fxos-m83-8p40-cruzboot.4.0.1.62.bin is available to be installed:
fxos-chassis /chassis/server/adapter # show image Name Type Version --------------------------------------------- -------------------- ------- fxos-m83-8p40-cruzboot.4.0.1.62.bin Adapter Boot 4.0(1.62) fxos-m83-8p40-vic.4.0.1.51.gbin Adapter 4.0(1.51)
-
Enter update boot-loader to update the adapter boot image to version 4.0.1.62:
fxos-chassis /chassis/server/adapter # update boot-loader 4.0(1.62) Warning: Please DO NOT reboot blade or chassis during upgrade, otherwise, it may cause adapter to become UNUSABLE! After upgrade has completed, blade will be power cycled automatically fxos-chassis /chassis/server/adapter* # commit-buffer
-
Enter show boot-update status to monitor the update status:
fxos-chassis /chassis/server/adapter # show boot-update status State: Updating fxos-chassis /chassis/server/adapter # show boot-update status State: Ready
-
Enter show version detail to verify that the update was successful:
Note
Your show version detail output might differ from the following example. However, verify that Bootloader-Update-Status is “Ready” and that Bootloader-Vers is 4.0(1.62).
fxos-chassis /chassis/server/adapter # show version detail Adapter 1: Running-Vers: 5.2(1.2) Package-Vers: 2.2(2.17) Update-Status: Ready Activate-Status: Ready Bootloader-Update-Status: Ready Startup-Vers: 5.2(1.2) Backup-Vers: 5.0(1.2) Bootloader-Vers: 4.0(1.62)
Resolved and Open Bugs
The resolved and open bugs for this release are accessible through the Cisco Bug Search Tool. This web-based tool provides you with access to the Cisco bug tracking system, which maintains information about bugs and vulnerabilities in this product and other Cisco hardware and software products.
Note |
You must have a Cisco.com account to log in and access the Cisco Bug Search Tool. If you do not have one, you can register for an account. |
For more information about the Cisco Bug Search Tool, see the Bug Search Tool Help & FAQ.
Open Bugs
The following table lists select bugs open at the time of this Release Notes publication:
Identifier | Description |
---|---|
FXOS / ASA multi context changing mgmt ip will remove interface allocation on logical pp instance |
|
FXOS call home address validation does not accept common name without domain prefix |
|
Firepower Chassis Manager Showing Smart Agent Disabled after upgrade to 2.7.1 |
|
Confusing message about 'without removing the physical hardware' during Acknowledge Security Module |
|
SNMP cored multiple times resulting FXOS hap reset |
|
FXOS - Recover hwclock of service module from corruption due to simultaneous write collision |
|
FCM should say is not possible to change AAA server when same protocol is configured for Auth |
|
the SSH and console of firepower4110 is not working |
|
All FTW interfaces link flap at random times |
|
"Link not connected" error after reboot when using WSP-Q40GLR4L transceiver on FPR9K-NM-4X40G |
|
FP 4120 svc_sam_dcosAG crashed with crash type:139 |
|
Removing FAN module from the device doesn’t change the value of cfprEquipmentFanModuleStatsSuspect |
|
Multiple shut/no shut on N9K causes link failure if connected to FP9300 with WSP-Q40GLR4L xceiver |
|
FXOS sends Link Down SNMP trap when the link is Up when changing interface status from FCM |
|
duplicate default network control policy in GUI |
|
extra "Local Disk 3" displayed on FPR9300 |
Resolved Bugs in FXOS 2.8.1.198
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.198:
Caveat ID Number |
Description |
---|---|
FMC allows shell access for user name with "." but external authentication will fail |
|
WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (Seq 36) |
|
CCM layer (Seq 38) WR8, LTS18, LTS21 |
|
FXOS should check reference clock stratum instead of NTP server local clock stratum |
|
ENH: FCM should include option for modifying the interface 'link debounce time' |
|
FXOS:after fxos config import new port-channel creation causing existing port-channel flap |
|
Upgrade fail & App Instance fail to start with err "CSP_OP_ERROR. CSP signature verification error." |
|
NTP logs will eventually overwrite all useful octeon kernel logs |
|
[FTDv/Kenton/ISA3k - FXOS] Add sshd monitor logic to /etc/init.d/sshdd in case sshd fails. |
|
ENH: FCM should include option for modifying the interface 'link debounce time' |
Resolved Bugs in FXOS 2.8.1.190
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.190:
Caveat ID Number |
Description |
---|---|
FPR1010: Add support for ATU, VTU and other switch faults to be read through CLI |
|
Root shell injection in security module "support fileview" command |
|
WR8 and LTS18 commit id update in CCM layer (sprint 126, seq 22) |
|
WR6 and WR8 commit id update in CCM layer (sprint 129, seq 23) |
|
WR8 and LTS18 commit id update in CCM layer (seq 24) |
|
WR8, LTS18 and LTS21 commit id update in CCM layer (Seq 25) |
|
WR8, LTS18 and LTS21 commit id update in CCM layer (seq 26) |
|
FXOS is not rotating log files for management interface |
|
Tune throttling flow control on syslog-ng destinations |
|
WR6, WR8 commit id update in CCM layer(Seq 30) |
|
2.8.1 build breakage (backout) |
|
FXOS misses logs to diagnose root cause of module show-tech file generation failure |
|
FXOS is not rotating log files for partition opt_cisco_platform_logs |
|
Update certificate bundle for 7.2 release |
|
nvram logs consistently written every 2 seconds causing high disk utilization |
|
ASA installation/upgrade fails due to internal error "Available resources not updated by module" |
Resolved Bugs in FXOS 2.8.1.186
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.186:
Caveat ID Number |
Description |
---|---|
ENH: FPR 4100/9300 bcm_usd process logs to support possible RCA |
|
ENH: Prevent CCL IP addressing on the 169.254.x.x subnet on cluster creation |
|
Disk utilization increasing /var/tmp in FPR4150-ASA chassis |
|
FXOS process core pruned/deleted from system files (no validation) |
|
FXOS A crafted request uri-path can cause mod_proxy to forward the request to an origin server... |
|
Can't Generate FPRM Logs - Fails when custom user with admin priviledge tries |
|
Download image errored in automation as download state is missing in show download-task |
|
FXOS upgrade does not do proper compatibility check for FTD image |
|
4100/9300: GET/PATCH sys/mgmt-ipv6 returned 404 error |
|
Integrate fail2ban into FXOS supported FXOS Managed Releases |
|
Lina shell execute is failing causing EST operations to fail on FPR1K/FPR4K/FPR9K |
|
FXOS changes to provide dmidecode access to container |
|
Tune throttling flow control on syslog-ng destinations |
|
Disk corruption occurs when /mnt/disk0 partition is full and blade is rebooted |
|
Software upgrade on ASA application may failure without obvious reasons |
|
ASA App Instance Failed to come up with 2.8.1.183 |
|
Chassis local date and time may drift back to midnight Jan 1 2015 after reboot |
|
After upgrading to image "2.8(1.177)" device is going to failsafe mode across all platform |
|
ASA installation/upgrade fails due to internal error "Available resources not updated by module" |
|
The ipv4_pktinfo_prepare function in the kernel allows attackers to cause a denial of service |
|
In rx_queue_add_kobject() and netdev_queue_add_kobject() a reference count is mishandled |
|
CIAM: Apache-http-server CVE-2021-44790 and CVE-2021-44224 |
|
Multi-instance internal portchannel VLANs may be misprogrammed causing traffic loss |
|
Uploading firmware triggers data port-channel to flap |
|
FXOS: Third-party interop between Ciena Waveserver with firepower chassis. |
|
High CPU on FXOS due to bcm_usd process |
|
FPR 4100 saw an unexpected reload with reason "Reset triggered due to HA policy of Reset" |
|
FXOS traceback and reload due Service "ascii-cfg" sent SIGABRT for not setting heartbeat. |
|
Fault Related to Unhealthy module FlexFlash Controller 1 old Firmware |
|
FXOS System temporary directory usage is unexpectedly high |
|
FXOS may display fault F1256 about missing local disk 0 |
|
Cisco FXOS and NX-OS Software Cisco Discovery Protocol Service Denial of Service |
Resolved Bugs in FXOS 2.8.1.172
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.172:
Caveat ID Number |
Description |
---|---|
AppAgent Heartbeat enhancement. |
|
BootCLI commands user messages to be more clear |
|
ENH: FXOS CPU_Verification_Error should be more descriptive |
|
6.6.0-49 : VDB install failed on 9300/4100 platforms |
|
Handle CIMC Watchdog reset in MIO |
|
Lina traceback and core file size is beyond 40G and compression fails. |
|
Permission denied error on 4100 platform when radius user establishes an SSH session. |
Resolved Bugs in FXOS 2.8.1.164
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.164:
Caveat ID Number |
Description |
---|---|
Chassis SSD firmware upgrade may be prevented improperly. |
Resolved Bugs in FXOS 2.8.1.162
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.162:
Caveat ID Number |
Description |
---|---|
Backplane Eth1/9 link keeps DOWN until reboot the chassis |
|
FXOS: some interface transition logs have no reason |
|
FXOS FTD Multi Instance CPU cores shared between different instances |
|
Reject the NTP server on the MIO side when the stratum value is higher than device can handle |
|
TD2 does not load balance MPLS across backplane interfaces and sends it all to first interface |
|
FXOS - AAA/RADIUS - NAS-IP Field set to 127.0.01 |
|
Firepower may reboot for no apparent reason |
|
SNMP polling stopped working on active device in HA |
|
FP2100 - SNMP: incorrect values returned for Ethernet statistics polling |
|
MsgLayer[PID]: Error : Msglyr::ZMQWrapper::registerSender() : Failed to bind ZeroMQ Socket |
|
No utility to handle XFS corruption on 2100/1000 series Firepower devices |
|
FXOS: Voltage on DC PSU displayed with wrong values from the 'show stats' |
|
FTD/ASA creates coredump file with "!" character in filename (zmq changes (fxos) for CSCvv40406 ) |
|
Message appearing constantly on diagnostic-cli |
|
KP fxos snmp has uninit strings for entPhysicalSerialNum,entPhysicalAssetID on EPM index |
|
Firepower 1010 Series stops passing traffic when a member of the port-channel is down |
|
Error "No such file or directory" happended when using "copy ftp: wrokspace:" in FXOS 2.8.1 |
|
4100/9300: Cannot associate port channel / interface to App |
|
"Link not connected" error when using WSP-Q40GLR4L transceiver and Arista switch |
|
ASA upgrade failed with: "CSP directory does not exist - STOP_FAILED Application_Not_Found" |
|
Radius Key with the ASCII character " configured on FXOS does not work after chassis reload. |
|
ENH: Rename status BYPASS-FAIL for fail-to-wire inline pairs |
|
FP2100 ASA - 1 Gbps SFP in network module down/down after upgrade to 9.15.1.1 |
|
FXOS upgrade fails with error "does not support application instances of deployment type container" |
|
Need handling of rmu read failure to ignore link state update when link state API read fails |
|
FXOS reporting old FTD version after FTD upgrade to 6.7.0 |
|
Pre-login-banner not showing on FCM WebUI |
|
Firepower memory leak in svc_sam_dcosAG |
|
FXOS clock sync issue during blade boot up due to "MIO DID NOT RESPOND TO FORCED TIME SYNC" |
|
ENH: add a way to disable the FQDN check |
|
Sudo before 1.9.5p2 has a Heap-based Buffer Overflow, allowing privile |
|
FXOS show fault warning code F4526902 |
|
Not able to set Bangkok time zone in FPR 2110 |
|
Time sync do not work correctly for ASA on FPFPR2100 series platform |
|
FXOS : 'Memory leak' may casue appAG process traceback and reload |
|
FTD 2110 ascii characters are disallowed in LDAP password |
|
When ASA upgrade fails, version status is desynched between platform and application |
|
FP93K // 2.3.1.144 // SSH sessions not clearing. More than 32 FPRM CLI sessions are not allowed |
|
Upgrade from 6.6.0-90 to 6.7.0-1552 failed at 000_start/125_verify_bundle.sh on FP1150 |
|
FTW port mode is always "Disabled" |
|
FXOS code changes to complement fix of ndclient fix introduced by CSCvy07654 |
|
FTD container goes to install failed with error "Container support requires Blade reinitialization" |
|
FXOS: Unexpected reload of applications running on security blade triggered by chassis |
|
The 4k/9k SUP should reboot the blade when it is hung due to CATERR |
|
BCM SDK patch 6.5.8 - Parity error in TDM Calendar memories causes traffic drop after SER correction |
|
Display message ???nothing to update??? if the SSD installed is not applicable for the firmware update |
|
FXOS does not check the total amount of available memory with a missing or failed DIMM |
|
PortAG Core file detected while testing UUT Image 92.10.1.212 |
|
Need to include AAA logs/debugs in FPRM tar bundle |
|
FP9300 2.8.1.105 chassis reboots after adding 16th Instance in SM-56 |
|
ASA netsnmp:: Log rotate for snmp log file |
|
snmpd is respawning frequently on fxos for FP21xx device |
|
FP1100: starting with 6.5.0.4, /isan not offloaded to /mnt/boot |
|
[6.7.0-1963] vFTD-HA: snmpwalk to standby vFTD is getting timeout |
|
KP-fxos Changing SNMP_FREE to snmp_free_pdu while freeing pdu. |
|
enhance debug prints in switch_driver code |
|
TPK/WA -- FEC/Storm Ctrl errors on KP/WM filling up logs |
|
Negative values seen in the output of show portmanager counters |
|
9.14MR3: snmpwalk got failed with [Errno 146] Connection refused error. |
Resolved Bugs in FXOS 2.8.1.152
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.152:
Caveat ID Number |
Description |
---|---|
ASA module fails to upgrade (GracefulStopApp FSM failure) |
|
Timezone in "show clock" is different from which in "show run clock" |
|
QuoVadis root CA decommission on Firepower 9300/4100 Supervisor |
|
MIO SSD upgraded to wrong firmware version. |
|
QW:4112:FXOS traceback and reload after upgrade to 2.8.1.143 |
|
Need to support firmware upgrade for SSD in FXOS |
Resolved Bugs in FXOS 2.8.1.143
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.143:
Identifier | Description |
---|---|
statsAG memory leak |
|
ma_ctx*.log consuming high diskspace on FPR4100/FPR9300 despite the fix for CSCvx07389 |
|
VIC adapter kernel crash at boot |
|
Memory leak : DME process may traceback generating core on Firepower 4100/9300 (M5 series only) |
|
CRUZ paloview is not accessible on release build |
Resolved Bugs in FXOS 2.8.1.139
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.139:
Identifier | Description |
---|---|
core_svc_sam_dme found after upgrade |
|
LCMB: Dynamic medium page allocation can lead to memory depletion |
|
hostname transmission: Hostname is null, Device sends hostname as "none" to SA |
|
Add stack support for FTD/NGIPS to improve the troubleshoot of processes in D state |
|
ASA Traceback in thread name: CERT API memory leak while processing CRLs |
|
FXOS: svc_sam_dcosAG process crash on FirePower 4100/9300 |
|
connector log exhausted disk space |
|
BEMS01080980 - bad allowed_cpus in /etc/sf/arc.conf probably from cspCfg.xml |
|
"Link not connected" error after reboot when using QSFP-40G-LR4 transceiver on FPR9K-NM-4X40G |
|
Eval of FXOS for Apache vulnerabilities CVE-2020-1927 and CVE-2020-1934 |
|
An extra whitespace in cluster group name of FTD causing Secondary to be kicked out. |
|
An extra whitespace in cluster group name of FTD causing data unit to be kicked out. |
|
Firepower 4100/9300 - Fail-to-wire (FTW) EPM ports link flap during show tech collection |
|
CIAM: nfs-utils 1.3.0 |
|
ASA app-instance restart without audit log or trigger |
|
FXOS Multi-Instance fault F0479 Virtual Interface link state is down |
|
FXOS dynamically learning mac-address of external machine causing outage |
|
FXOS sending additional internal VLAN TAG leading to ARP update failure on devices. |
|
2.9.1.84 - 4 node QP longevity setup with SNMPD core on Primary |
|
Duplicate ARP replies for IPv4 management address on FTD |
|
FXOS portAG memory leak during periodical interface polls |
|
Upgrade : FSM status can show incorrect value after upgrade |
Resolved Bugs in FXOS 2.8.1.125
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.125:
Identifier | Description |
---|---|
FXOS L3 Egress Object Resource Leak due to Port-Channel Member Interface Flaps |
|
NTP script error leading to clock drift and traffic interruption |
|
FXOS displays a WSP-Q40GLR4L transceiver from show interface as type QSFP-40G-LR4 |
|
OSPF multicast mac getting removed from l2-table causing OSPF to fail |
|
Need dedicated Rx rings for failover and OSPF on Firepower platform - Cruz fix |
|
Firepower 4100 series all FTW interfaces link flap at the same time but occur rarely |
|
"Link not connected" error after reboot when using WSP-Q40GLR4L transceiver on FPR9K-NM-4X40G |
|
FPR4100/9300: Packet drops during the transition of BYPASS to NON-BYPASS when device is rebooted |
|
FP 4120 svc_sam_dcosAG crashed with crash type:139 |
|
extra "Local Disk 3" displayed on FPR9300 (improved solution) |
|
fpr4100 snmp polling to fxos memory-usage shows incorrect value compare with CLI's output |
|
Instance start failed due to VNIC configuration error |
|
9300/4100 : Port-channel down after chassis software upgrade. |
|
Enhance common-msglyr library to set/get ZMQ_XPUB_NODROP channel property |
|
WR6, WR8 and LTS18 commit id update in CCM layer (sprint 85) |
|
FXOS ASA race condition leading to cluster join failure and network outage |
|
Service module not returning error to supervisor when SMA resources are depleted |
|
Blade unresponsive after several months of Uptime |
|
Firepower 9300 FPR-NM-4X100G or FPR-NM-2X100G interface may blackhole port-channel member traffic |
|
Multi-instance Portchannel VLANs not programmed correctly causing internal traffic loss |
Resolved Bugs in FXOS 2.8.1.105
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.8.1.105:
Identifier | Description |
---|---|
Ftd app-instance is stuck in install failed with INSTALL_ERROR. Application internal script Error. |
|
Port-channels are in suspended state after upgrade |
|
The global upgrade button is grayed out even though one security module is up |
|
FXOS Cruz Adapter doesn't validate data sent by logical device causing dropped offloaded packets |
|
Interface not associated to MI instance even though it shows in chassis manager as allocated |
|
Cluster node management connectivity lost after reboot |
|
FTD may not become online after installing vDP and upgrading FXOS to version 2.4.1 |
|
Bootstrap configuration is not updated after FTD version downgrade |
|
" hostname transmission sts" script is getting failed due to exception Hostname null |
|
FXOS fault F0479 Virtual Interface link state is down |
Related Documentation
For additional information on the Firepower 9300 or 4100 series security appliance and FXOS, see Navigating the Cisco FXOS Documentation.
Online Resources
Cisco provides online resources to download documentation, software, and tools, to query bugs, and to open service requests. Use these resources to install and configure FXOS software and to troubleshoot and resolve technical issues.
-
Cisco Support & Download site: https://www.cisco.com/c/en/us/support/index.html
-
Cisco Bug Search Tool: https://tools.cisco.com/bugsearch/
-
Cisco Notification Service: https://www.cisco.com/cisco/support/notifications.html
Access to most tools on the Cisco Support & Download site requires a Cisco.com user ID and password.
Contact Cisco
If you cannot resolve an issue using the online resources listed above, contact Cisco TAC:
-
Email Cisco TAC: tac@cisco.com
-
Call Cisco TAC (North America): 1.408.526.7209 or 1.800.553.2447
-
Call Cisco TAC (worldwide): Cisco Worldwide Support Contacts
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.