Cisco Firepower 4100/9300 FXOS Release Notes, 2.7(1)
This document contains release information for Cisco Firepower eXtensible Operating System (FXOS) 2.7(1).
Use this release note as a supplement with the other documents listed in the documentation roadmap:
Note |
The online versions of the user documentation are occasionally updated after the initial release. As a result, the information contained in the documentation on Cisco.com supersedes any information contained in the context-sensitive help included with the product. |
Introduction
The Cisco Firepower security appliance is a next-generation platform for network and content security solutions. The Firepower security appliance is part of the Cisco Application Centric Infrastructure (ACI) Security Solution and provides an agile, open, secure platform that is built for scalability, consistent control, and simplified management.
The Firepower security appliance provides the following features:
-
Modular chassis-based security system—Provides high performance, flexible input/output configurations, and scalability.
-
Firepower Chassis Manager—Graphical user interface provides a streamlined, visual representation of the current chassis status and allows for simplified configuration of chassis features.
-
FXOS CLI—Provides command-based interface for configuring features, monitoring chassis status, and accessing advanced troubleshooting features.
-
FXOS REST API—Allows users to programmatically configure and manage their chassis.
What’s New
New Features in FXOS 2.7.1.131
Fixes for various problems (see Resolved Bugs in FXOS 2.7.1.131).
New Features in FXOS 2.7.1.122
Fixes for various problems (see Resolved Bugs in FXOS 2.7.1.122).
New Features in FXOS 2.7.1.106
Fixes for various problems (see Resolved Bugs in FXOS 2.7.1.106).
New Features in FXOS 2.7.1.98
Fixes for various problems (see Resolved Bugs in FXOS 2.7.1.98).
New Features in FXOS 2.7.1.92
Cisco FXOS 2.7.1.92 introduces the following new features:
Feature |
Description |
---|---|
Support for ASA 9.13(1) |
For more information about ASA 9.13.1, see Release Notes for the Cisco ASA Series, 9.13(x). For more information about version compatibility, see Cisco Firepower 4100/9300 FXOS Compatibility. |
Support for Firepower Threat Defense 6.5 |
For more information about FTD 6.5, see Cisco Firepower Release Notes, Version 6.5.0. For more information about version compatibility, see Cisco Firepower 4100/9300 FXOS Compatibility. |
Support for FTD with Firepower Device Manager |
You can now deploy a native FTD instance and specify FDM management. Container instances are not supported. New/Modified commands: scope ssa > enter logical-device > create mgmt-bootstrap > enter bootstrap-key MANAGEMENT_TYPE , set value LOCALLY_MANAGED . New/modified Firepower Chassis Manager screens: Logical Devices > Add Device > Settings > Management type of application instance Note: Requires FTD 6.5.0 or later. |
Support for hardware bypass OIR |
You can now perform an Online Insertion and Removal (OIR) for hardware bypass network modules. |
TLS crypto acceleration for multiple container instances |
TLS crypto acceleration is now supported on multiple container instances (up to 16) on a Firepower 4100/9300 chassis. Previously, you could enable TLS crypto acceleration for only one container instance per module/security engine. New instances have this feature enabled by default. However, the upgrade does not enable acceleration on existing instances. Instead, use the create hw-crypto and scope hw-crypto CLI commands. For more information, see the Cisco Firepower 4100/9300 FXOS Command Reference. |
Support for ASA Security Service Exchange (SSE) Telemetry |
With Cisco Success Network enabled in your network, device usage information and statistics are provided to Cisco, which are used to optimize technical support. The telemetry data that is collected on your ASA devices includes CPU, memory, disk, or bandwidth usage, license usage, configured feature list, cluster/failover information and the like. |
Support for 500 VLANs without contingencies |
Previously, the device supported between 250 and 500 VLANs, depending on the number of parent interfaces and other deployment decisions. You can now use 500 VLANs in all cases. |
Support for downloading images using HTTP/HTTPS |
You can now download FXOS images using HTTP/HTTPS through the FXOS CLI and RestAPI. |
Chassis Manager support for LLDP configuration |
You now have the option to enable or disable LLDP using the Firepower Chassis Manager interface. |
New IPSec ciphers and algorithms |
Added the following IKE and ESP ciphers and algorithms:
|
Keyring certificate request FQDN checks |
The feature checks the subject name and DNS fields when a certificate request is created to ensure the values entered are FQDNs. Previously, the options that allowed adding subject alternative names to certificate requests only accepted one parameter. Now, you can add multiple values for dns, e-mail, ip, and ipv6 fields. Added the "set DNS" command to disable the FQDN check. |
SSH authentication enhancements |
Added the following SSH server encryption algorithms:
Added the following SSH server key exchange methods:
|
ECDSA keys for keyrings |
You can now use ECDSA keys for keyrings. Previously only RSA keys were supported. |
User password improvements |
Added password security improvements, including the following:
|
Secure erase for appliance components |
You can now use the erase secure FXOS CLI command to securely erase a specified appliance component. |
Fixes for various problems |
For more information, see Resolved Bugs in FXOS 2.7.1.92. |
Software Download
You can download software images for FXOS and supported applications from one of the following URLs:
-
Firepower 9300 — https://software.cisco.com/download/type.html?mdfid=286287252
-
Firepower 4100 — https://software.cisco.com/download/navigator.html?mdfid=286305164
For information about the applications that are supported on a specific version of FXOS, see the Cisco FXOS Compatibility guide at this URL:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/compatibility/fxos-compatibility.html
Important Notes
-
To mitigate CSCvq34340, upgrading an FTD device to Version 6.5.0.2 turns off egress optimization processing regardless of whether the egress optimization feature is enabled or disabled. For more information, see Cisco Firepower Release Notes, Version 6.5.0.x.
-
In FXOS 2.4(1) or later, if you are using an IPSec secure channel in FIPS mode, the IPSec peer entity must support RFC 7427.
-
If you reinitialize a security module after upgrading to FXOS 2.6(1), you might receive an error message about disk partitions on that security module being incompatible if you later downgrade to an earlier FXOS release. To resolve this issue, you need to reinitialize the security module again after downgrading.
-
When you configure Radware DefensePro (vDP) in a service chain on a currently running Firepower Threat Defense application on a Firepower 4110 or 4120 device, the installation fails with a fault alarm. As a workaround, stop the Firepower Threat Defense application instance before installing the Radware DefensePro application.
Note
This issue and workaround apply to all supported releases of Radware DefensePro service chaining with Firepower Threat Defense on Firepower 4110 and 4120 devices.
-
Firmware Upgrade—We recommend upgrading your Firepower 4100/9300 security appliance with the latest firmware. For information about how to install a firmware update and the fixes included in each update, see https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/firmware-upgrade/fxos-firmware-upgrade.html.
-
When you upgrade a network or security module, certain faults are generated and then cleared automatically. These include a “hot swap not supported” fault or a “module removed when in online state” fault. If you have followed the appropriate procedures, as described in the Cisco Firepower 9300 Hardware Installation Guide or Cisco Firepower 4100 Series Hardware Installation Guide, the fault(s) are cleared automatically and no additional action is required.
Adapter Bootloader Upgrade
FXOS 2.7(1) provides additional testing to verify the security module adapters on your security appliance. After installing FXOS 2.4.1.101 or later, you might receive a critical fault similar to the following indicating that you should update the firmware for your security module adapter:
Critical F1715 2017-05-11T11:43:33.121 339561 Adapter 1 on Security Module 1 requires a critical firmware upgrade. Please see Adapter Bootloader Upgrade instructions in the FXOS Release Notes posted with this release.
If you receive this, use the following procedure to update the boot image for your adapter. Note that this procedure may result in a traffic disruption, and thus should be performed during a maintenance window to avoid business impact.
-
Connect to the FXOS CLI on your Firepower security appliance. For instructions, see the “Accessing the FXOS CLI” topic in the Cisco Firepower 4100/9300 FXOS CLI Configuration Guide, 2.7(1) or Cisco Firepower 4100/9300 FXOS Firepower Chassis Manager Configuration Guide, 2.7(1).
-
Enter the adapter mode for the adapter whose boot image you are updating:
fxos-chassis# scope adapter 1/security_module_number/adapter_number
-
Enter show image to view the available adapter images and to verify that fxos-m83-8p40-cruzboot.4.0.1.62.bin is available to be installed:
fxos-chassis /chassis/server/adapter # show image Name Type Version --------------------------------------------- -------------------- ------- fxos-m83-8p40-cruzboot.4.0.1.62.bin Adapter Boot 4.0(1.62) fxos-m83-8p40-vic.4.0.1.51.gbin Adapter 4.0(1.51)
-
Enter update boot-loader to update the adapter boot image to version 4.0.1.62:
fxos-chassis /chassis/server/adapter # update boot-loader 4.0(1.62) Warning: Please DO NOT reboot blade or chassis during upgrade, otherwise, it may cause adapter to become UNUSABLE! After upgrade has completed, blade will be power cycled automatically fxos-chassis /chassis/server/adapter* # commit-buffer
-
Enter show boot-update status to monitor the update status:
fxos-chassis /chassis/server/adapter # show boot-update status State: Updating fxos-chassis /chassis/server/adapter # show boot-update status State: Ready
-
Enter show version detail to verify that the update was successful:
Note
Your show version detail output might differ from the following example. However, verify that Bootloader-Update-Status is “Ready” and that Bootloader-Vers is 4.0(1.62).
fxos-chassis /chassis/server/adapter # show version detail Adapter 1: Running-Vers: 5.2(1.2) Package-Vers: 2.2(2.17) Update-Status: Ready Activate-Status: Ready Bootloader-Update-Status: Ready Startup-Vers: 5.2(1.2) Backup-Vers: 5.0(1.2) Bootloader-Vers: 4.0(1.62)
System Requirements
You can access the Firepower Chassis Manager using the following browsers:
-
Mozilla Firefox—Version 42 and later
-
Google Chrome—Version 47 and later
-
Microsoft Internet Explorer—Version 11 and later
We tested FXOS 2.7(1) using Mozilla Firefox version 42, Google Chrome version 47, and Internet Explorer version 11. Other versions of these browsers are expected to work. However, if you experience any browser-related issues, we suggest you use one of the tested versions.
Upgrade Instructions
You can upgrade your Firepower 9300 or Firepower 4100 series security appliance to FXOS 2.7(1) if it is currently running any FXOS 2.0(1) or later build.
For upgrade instructions, see the Cisco Firepower 4100/9300 Upgrade Guide.
Installation Notes
-
An upgrade of a single chassis to FXOS 2.7(1) can take up to 45-60 minutes. Note that your upgrade time may vary depending on the hardware, software, and complexity of your deployment. Plan your upgrade activity accordingly.
Use scope system > show firmware monitor in the FXOS CLI to monitor your upgrade progress.
-
If you are upgrading a Firepower 9300 or Firepower 4100 series security appliance that is running a standalone logical device or if you are upgrading a Firepower 9300 security appliance that is running an intra-chassis cluster, traffic does not traverse through the device while it is upgrading.
-
If you are upgrading a Firepower 9300 or a Firepower 4100 series security appliance that is part of an inter-chassis cluster, traffic does not traverse through the device being upgraded while it is upgrading. However, the other devices in the cluster continue to pass traffic.
-
Downgrade of FXOS images is not officially supported. The only Cisco-supported method of downgrading an image version of FXOS is to perform a complete re-image of the device.
Open and Resolved Bugs
The open and resolved bugs for this release are accessible through the Cisco Bug Search Tool. This web-based tool provides you with access to the Cisco bug tracking system, which maintains information about bugs and vulnerabilities in this product and other Cisco hardware and software products.
Note |
You must have a Cisco.com account to log in and access the Cisco Bug Search Tool. If you do not have one, you can register for an account. |
For more information about the Cisco Bug Search Tool, see the Bug Search Tool Help & FAQ.
Open Bugs
The following table lists select bugs open at the time of this Release Note publication:
Identifier | Description |
---|---|
CSCvq30293 | Bootstrap configuration is not updated after FTD version downgrade |
CSCvq47804 | FXOS security module will not power up after FTD shutdown |
CSCvq87570 | " hostname transmission sts" script is getting failed due to exception Hostname null |
CSCvr08375 | ASA telemetry: add another FSM stage to check enrollment and call GET KEY before registration stage |
CSCvr18121 | Observed "Overall status : Disc failed" in show server status after acknowledging slot 1 |
CSCvr20219 | MISMATCH between versions on FXOS UI and FMC shown after upgrade from 6.4.0.4 to 6.5 |
Resolved Bugs in FXOS 2.7.1.143
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.7.1.143:
Identifier |
Description |
---|---|
FXOS Multi-Instance fault F0479 Virtual Interface link state is down |
|
Cisco FXOS and NX-OS Software UDLD DoS and Arbitrary Code Execution Vulnerability |
|
Cisco FXOS and NX-OS Software UDLD DoS and Arbitrary Code Execution Vulnerability |
|
QuoVadis root CA decommission on Firepower 9300/4100 Supervisor |
|
\"System does not allow more than 16 TPs\" on 2.3.1.213 |
|
MIO SSD upgraded to wrong firmware version |
|
CSCvy23422 |
QW:4112:FXOS traceback and reload after upgrade to 2.8.1.143 |
CSCvo14325 |
Make sure MIO reboot in case of firmware upgrade is graceful |
CSCvu01873 |
CSP/SPA installation file name check wont allow valid characters |
CSCvv05277 |
Need to support firmware upgrade for SSD in FXOS |
Resolved Bugs in FXOS 2.7.1.131
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.7.1.131:
Identifier | Description |
---|---|
"show open-network-ports" not showing the proper information on FPR4100 Series |
|
FPR4100/9300 Smart Licensing fail - Error : Licensing internal error(68) |
|
FXOS fault F0479 Virtual Interface link state is down |
|
AppAG encoding for FXOS logical device bootstrap |
|
FXOS crash (Traceback in cruz) |
|
FPR9300 hangs after reboot is triggered for firmware upgrade |
|
Continuous link flapping leading to snm_log corefile |
|
Inconsistent interface status on the FXOS when Port is Down by Propagate Link State |
|
FXOS 8x1G FTW continuous link flap |
|
FXOS L3 Egress Object Resource Leak due to Port-Channel Member Interface Flaps |
|
FXOS displays a WSP-Q40GLR4L transceiver from show interface as type QSFP-40G-LR4 |
|
FTW watch-dog kick delays which might cause inline sets to go down/Bypass-Fail |
|
OSPF multicast mac getting removed from l2-table causing OSPF to fail |
|
Need dedicated Rx rings for failover and OSPF on Firepower platform - Cruz fix |
|
Firepower 4100 series all FTW interfaces link flap at the same time but occur rarely |
|
"Link not connected" error after reboot when using WSP-Q40GLR4L transceiver on FPR9K-NM-4X40G |
|
FP 4120 svc_sam_dcosAG crashed with crash type:139 |
|
fpr4100 snmp polling to fxos memory-usage shows incorrect value compare with CLI's output |
|
Instance start failed due to VNIC configuration error |
|
9300/4100 : Port-channel down after chassis software upgrade. |
|
"Link not connected" error after reboot when using QSFP-40G-LR4 transceiver on FPR9K-NM-4X40G |
|
FXOS ASA race condition leading to cluster join failure and network outage |
|
ASA app-instance restart without audit log or trigger |
|
FXOS Multi-Instance fault F0479 Virtual Interface link state is down |
|
Firepower 9300 FPR-NM-4X100G or FPR-NM-2X100G interface may blackhole port-channel member traffic |
|
FXOS dynamically learning mac-address of external machine causing outage |
Resolved Bugs in FXOS 2.7.1.122
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.7.1.122:
Identifier | Description |
---|---|
BladeAG reload due to memory leak with M5 blade |
Resolved Bugs in FXOS 2.7.1.106
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.7.1.106:
Identifier | Description |
---|---|
Firepower Chassis Reloads due to License Manager |
|
FxOS randomly shows one NTP server as 'Unreachable Or Invalid Ntp Server' once added 4 NTP servers |
|
Unable to add user on FTD using external authentication |
|
[ciam] Apache HTTP Server mod_rewrite Configurations Open Redirect Vulnerability |
|
mgmt bootstrap PASSWORD should not be in appAG log |
|
DME process crash due to memory leak on Firepower 9300/4100 |
Resolved Bugs in FXOS 2.7.1.98
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.7.1.98:
Identifier | Description |
---|---|
OpenSSL 0-byte Record Padding Oracle Information Disclosure Vulnerabil |
|
CSCvq31946 | Ability to disable auto-negotiation for SFP (1G optical) |
CSCvr01651 | Data interfaces bring up delayed after chassis reboot |
CSCvr04845 | DME crash after FXOS chassis reload with maximum number of https ip-blocks configured |
CSCvr24920 | FPR-4110: FXOS CLI crash in feature-mgr process |
CSCvr40573 | FPR-4100: FXOS CLI crash with fwm hap reset |
Resolved Bugs in FXOS 2.7.1.92
The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.7.1.92:
Identifier | Description |
---|---|
CSCvd90177 | Security Module went to fault state after reloading Supervisor on 4150 with FXOS 2.2.1.57 |
CSCvj93832 | SM40/48/56 x86 cpu fails to come up after x86 power cycle using "init 6" on blade |
CSCvk26697 | bcm_usd_log core files detected with 92.4.1.2889 image |
CSCvn57429 | Ftd app-instance is stuck in install failed with INSTALL_ERROR. Application internal script Error. |
CSCvo03589 | App agent heart beat can miss in MI scenario |
CSCvo30356 | Port-channels are in suspended state after upgrade |
CSCvo55237 | The global upgrade button is grayed out even though one security module is up |
CSCvo55809 | ASA App stuck in installing sate on 2.6.1.112 + ASA 9.12.0.125 |
CSCvo58998 | FXOS Cruz Adapter doesn't validate data sent by logical device causing dropped offloaded packets |
CSCvo60117 | Interface not associated to MI instance even though it shows in chassis manager as allocated |
CSCvo74625 | 6.4.0 - IPv6 routing doesn't work for WM and KP when mgmt gateway configure as data-interfaces |
CSCvo83802 | Cluster node management connectivity lost after reboot |
CSCvp10674 | FTD may not become online after installing vDP and upgrading FXOS to version 2.4.1 |
CSCvp44939 | ASA app stuck in installing with error 'SMA_blade_reboot_inprogress' on 2.6.1.157 + 9.12.1.111 |
Related Documentation
For additional information on the Firepower 9300 or 4100 series security appliance and FXOS, see Navigating the Cisco FXOS Documentation.
Online Resources
Cisco provides online resources to download documentation, software, and tools, to query bugs, and to open service requests. Use these resources to install and configure Firepower software and to troubleshoot and resolve technical issues.
-
Cisco Support & Download site: https://www.cisco.com/c/en/us/support/index.html
-
Cisco Bug Search Tool: https://tools.cisco.com/bugsearch/
-
Cisco Notification Service: https://www.cisco.com/cisco/support/notifications.html
Access to most tools on the Cisco Support & Download site requires a Cisco.com user ID and password.
Contact Cisco
If you cannot resolve an issue using the online resources listed above, contact Cisco TAC:
-
Email Cisco TAC: tac@cisco.com
-
Call Cisco TAC (North America): 1.408.526.7209 or 1.800.553.2447
-
Call Cisco TAC (worldwide): Cisco Worldwide Support Contacts
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.