Introduction to this Document
This Release Notes document provides information about the Cisco Catalyst IR1101 Rugged Series Routers, Cisco Catalyst IR1800 Rugged Series Routers, Cisco Catalyst IR8140 Heavy Duty Series Routers, Cisco Catalyst IR8340 Rugged Series Routers, and Cisco ESR6300 Embedded Series Routers running Cisco IOS XE 17.12.2.
This document describes the new features, limitations, troubleshooting, besides providing recommended configurations, caveats, and information on how to obtain support and documentation.
Note |
The documentation set for this product strives to use bias-free language. For purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. |
Cisco Catalyst IR1101 Rugged Series Router
The Cisco Catalyst IR1101 Rugged Series Router is a next-generation modular industrial router, which has a base platform with additional pluggable modules that can be added. The pluggable modules provide the flexibility of adding different interfaces to the IR1101 platform, for example, a cellular module, which provides 5G and Fourth-Generation Long-Term Evolution (4G LTE) cellular networks.
The IR1101 also has expansion modules that adds key capabilities to the IR1101. The expansion modules are:
SKU ID |
Description |
---|---|
IRM-1100-SPMI |
Expansion Module with 1 GE SFP, 1 Pluggable Module, 4 GPIO ports on 1 Digital I/O Connector, and 1 mSATA SSD Slot. |
IRM-1100-SP |
Expansion Module with 1 GE SFP and1 Pluggable Module. |
IRM-1100-4A2T |
Expansion Module with an additional four asynchronous serial ports and two Ethernet RJ45 LAN interfaces. |
Cellular pluggable modules |
A number of pluggable modules are available for cellular connectivity. |
IRM-SSD-100G |
100 GB pluggable industrial SSD. |
P-LPWA-XXX |
|
P-LTE-450 |
Cisco 450MHz Category-4 LTE Pluggable Interface Module. |
Cisco Catalyst IR1800 Rugged Series Router
The Cisco Catalyst IR1800 Rugged Series Router is a modular industrial router. The IR1800 series has four base platforms with additional pluggable modules that can be added. The pluggable modules provide the flexibility of adding different interfaces to the base platform.
The IR1800 series consists of four base platforms:
-
IR1821
-
IR1831
-
IR1833
-
IR1835
The IR1800 series features a base platform with modularity, which includes:
SKU ID |
Description |
---|---|
IRM-GNSS-ADR |
GPS Module with Automotive Dead Reckoning. |
WP-WIFI6-x |
Wi-Fi 6 Network Interface Module (NIM). |
Cellular pluggable modules |
A number of pluggable modules are available for cellular connectivity. |
IRM-SSD-100G |
100 GB pluggable industrial SSD. |
Feature |
IR1821 |
IR1831 |
IR1833 |
IR1835 |
---|---|---|---|---|
Processor Frequency |
600 MHz |
600 MHz |
600 MHz |
1200 MHz |
DDR Memory |
4 GB |
4 GB |
4 GB |
8 GB |
Flash Storage |
4 GB |
4 GB |
4 GB |
8 GB |
PIM Slot |
1 |
2 |
2 |
2 |
Wi-Fi-6 NIM Module Slot |
1 |
1 |
1 |
1 |
PoE |
No |
No |
Yes |
Yes |
SSD Module Slot |
No |
No |
Yes |
Yes |
GPS FRU Module Slot |
No |
No |
Yes |
Yes |
Digital I/O |
No |
No |
No |
Yes |
Asynchronous Serial Interface |
(1) RS232 DTE |
(1) RS232 DTE (1) RS232 DCE |
(1) RS232 DTE (1) RS232 DCE |
(1) RS232 DTE (1) RS232 DCE/RS485 |
Cisco Catalyst IR8140 Heavy Duty Series Router
The Cisco Catalyst IR8140 Heavy Duty Series Router (IR8140H), is a next-generation modular IP67 Industrial Router for outdoor use.
These are the two IR8140H models:
-
IR8140H-P-K9 (with PoE PSE)
-
IR8140H-K9 (without PoE PSE)
The IR8140H series features contains four external module slots plus two onboard WAN ports, and supports the following:
-
60-W PSU
-
CPU 1.2 GHz
-
8GB RAM
-
8GB Flash Storage
-
GPS onboard receiver
-
900-MHz WPAN – OFDM/FSK Module
-
mSATA module
-
1x 1-Gigabit Ethernet SFP WAN
-
1x 1-Gigabit Ethernet Cu WAN
-
PoE (15 W) supported only in the IR8140H-P-K9 PID
-
12VDC_OUT port (only available when PoE is not in use)
-
Battery Backup Units (BBUs): Up to three
-
2x Alarm ports (Digital I/O)
-
IRMH modules for CAT 4 LTE, CAT 6 LTE, CAT 18 LTE, and 5G
Cisco Catalyst IR8340 Rugged Series Router
The Cisco Catalyst IR8340 Rugged Series Router, is the first all-in-one industrial-grade, integrated routing, switching, and security platform.
The IR8340 router features two Pluggable Interface Module (PIM) slots, two single-wide IRM-NIM slots, plus 12 onboard LAN ports, and two WAN ports, and supports the following:
-
150W or 250W PSU, low-voltage DC and high-voltage AC/DC options
-
PTP on LAN ports - Default, power and Dot1as profiles
-
Dual slots for 5G and 4G LTE PIM
-
T1/E1 Network Interface Modules (NIM)
-
8-port Asynchronous/Synchronous Network Interface Module (NIM) IRM-NIM-RS232
-
mSATA module
-
2 x 1-G Combo WAN ports
-
4 x 1-G Copper LAN ports
-
4 x 1-G Combo LAN ports
-
4 x 1-G SFP LAN ports
-
PoE PoE+ UPoE (up to 60 W) support on LAN ports 1-4
-
2 x IN and 1 x OUT Alarm ports (RJ45)
Cisco ESR6300 Embedded Series Router
The ESR6300 is a small form factor embedded router module with a board size of 3.0 in. x 3.775 in. (76.2 mm x 95.885 mm).
The more compact design simplifies integration and offers system integrators the ability to use the Cisco ESR6300 in a wide variety of embedded applications. The ESR module is available with a Cisco-designed cooling plate customized to the ESR, as well as without the cooling plate for system integrators who want to design their own custom thermal solution.
There are two ESR6300 SKUs:
-
ESR-6300-NCP-K9: Embedded Router Board without a cooling plate
-
ESR-6300-CON-K9: Embedded Router Board with a cooling plate
Both SKUs offer the following port and module interfaces:
-
Four GE LAN ports
-
Two combo GE WAN ports
-
One USB 3.0 port
-
One mSATA module interface
Interface Naming Conventions
Cisco Catalyst IR1101 Rugged Series Router
The following section shows the names of the interfaces on each of the IoT routers.
Port |
Naming Convention |
---|---|
Gigabit Ethernet combo port |
GigabitEthernet0/0/0 |
Gigabit Ethernet SFP port on IRM-1100 |
GigabitEthernet0/0/5 |
Gigabit Ethernet on IRM-1100-4A2T mounted on the Expansion side |
gigabitetherenet 0/0/5 gigabitetherenet 0/0/6 |
Fast Ethernet ports |
FastEthernet0/0/1 FastEthernet0/0/2 FastEthernet0/0/3 FastEthernet0/0/4 |
Cellular Interface on IR1101 Base |
Cellular 0/1/0 Cellular 0/1/1 |
Cellular Interface on IRM-1100 mounted on the top (EM) side |
Cellular 0/3/0 Cellular 0/3/1 |
Cellular Interface on IRM-1100 mounted on the bottom (CM) side |
Cellular 0/4/0 Cellular 0/4/1 |
Asynchronous Serial Interface Base |
Async0/2/0 |
IRM-1100-4A2T is mounted on the top (EM) side |
async 0/3/0 async 0/3/1 async 0/3/2 async 0/3/3 |
IRM-1100-4A2T is mounted on the bottom (CM) side |
async 0/4/0 async 0/4/1 async 0/4/2 async 0/4/3 |
USB |
usbflash0: |
mSATA |
msata |
IR1101 Base Unit Alarm input |
alarm contact 0 |
GPIO on IRM-1100 |
alarm contact 1-4 |
LoRaWAN interface on IR1101 Base |
LORAWAN0/1/0 |
LoRaWAN interface on the top (EM) side |
LORAWAN0/3/0 |
Gigabit Ethernet interface for LTE 450MHz module on IR1101 Base |
GI0/1/0 GI0/1/0.x for multiPDN operation |
Gigabit Ethernet interface for LTE 450MHz module mounted on the bottom (CM) side |
GI0/4/0 |
Cisco Catalyst IR1800 Rugged Series Router
Port |
Naming Convention |
---|---|
Gigabit Ethernet combo port |
GigabitEthernet0/0/0 |
Gigabit Ethernet ports |
GigabitEthernet0/1/0 GigabitEthernet0/1/1 GigabitEthernet0/1/2 GigabitEthernet0/1/3 |
Cellular Interface |
Cellular 0/4/0 Cellular 0/4/1 Cellular 0/5/0 Cellular 0/5/1 |
Asynchronous Serial Interface |
Async0/2/0 Async0/2/1 (when the base platform supports two asynchronous serial interfaces) |
Wi-Fi Interface |
Wl0/1/4 |
USB |
usbflash0: |
mSATA |
msata |
GPIO |
alarm contact 1-4 |
Cisco Catalyst IR8140 Heavy Duty Series Router
Port |
Naming Convention |
---|---|
Gigabit Ethernet ports |
GigabitEthernet0/0/0 GigabitEthernet0/0/1 |
Cellular Interface |
Cellular 0/2/0 OR Cellular 0/3/0 |
SSD |
Virtual port Group0 |
WPAN |
Wpan 0/1/0 Wpan 0/2/0 Wpan 0/3/0 |
Digital IO |
alarm contact 1-2 |
Cisco Catalyst IR8340 Rugged Series Router
Port |
Naming Convention |
---|---|
Gigabit Ethernet WAN ports |
GigabitEthernet0/0/0 GigabitEthernet0/0/1 |
Gigabit Ethernet LAN ports |
GigabitEthernet0/1/0 GigabitEthernet0/1/1 GigabitEthernet0/1/2 GigabitEthernet0/1/3 GigabitEthernet0/1/4 GigabitEthernet0/1/5 GigabitEthernet0/1/6 GigabitEthernet0/1/7 GigabitEthernet0/1/8 GigabitEthernet0/1/9 GigabitEthernet0/1/10 GigabitEthernet0/1/11 |
Cellular Interface |
Cellular 0/4/0 Cellular 0/4/1 Cellular 0/5/0 Cellular 0/5/1 |
NIM Interface (Asynchronous/Synchronous Serial Ports or E1/T1 ports) |
0/2/0 0/2/1 0/3/0 0/3/1 |
mSATA SSD |
msata |
GPIO |
alarm contact 1-2 |
USB Port |
usb0: |
Console Port |
Line console 0 |
Cisco ESR6300 Embedded Series Router
Port |
Naming Convention |
---|---|
Gigabit Ethernet combo port WAN Layer3 |
GigabitEthernet0/0/0 GigabitEthernet0/0/1 |
Gigabit Ethernet LAN Layer 2 ports |
GigabitEthernet0/1/0 GigabitEthernet0/1/1 GigabitEthernet0/1/2 GigabitEthernet0/1/3 |
Cellular Interface |
Cellular 0/3/0 |
USB Port |
usbflash0: (IOS and rommon) |
Console Port |
Line console 0 |
Software Images for Cisco IOS XE Release 17.12.2
Note |
You must have a Cisco.com account to download the software. |
Cisco IOS XE Release 17.12.2 includes the following Cisco images.
Router |
Image Type |
Filename |
---|---|---|
IR1101 |
Universal |
ir1101-universalk9.17.12.2.SPA.bin |
NPE |
ir1101-universal9_npe.17.12.2.SPA.bin |
|
IR1800 |
Universal |
IR1800-universalk9.17.12.2.SPA.bin |
NPE |
IR1800-universal9_npe.17.12.2.SPA.bin |
|
IR8140 |
Universal |
IR8100-universalk9.17.12.2.SPA.bin |
NPE |
IR8100-universal9_npe.17.12.2a.SPA.bin |
|
IR8340 |
Universal |
IR8340-universalk9.17.12.2.SPA.bin |
NPE |
IR8340-universalk9_npe.17.12.2.SPA.bin |
|
UTD Engine for Cisco ISR1100/ISR1100X and IOS XE |
utd.17.12.01a.1.0.7_SV3.1.55.0_XE17.12.x86_64.tar |
|
ESR6300 |
Universal |
c6300-universalk9.17.12.2.SPA.bin |
The latest software downloads for the routers can be found at:
https://software.cisco.com/download/home/286323433
Click the link corresponding to your device to take you to the specific software you are looking for.
Cellular Module Modem Firmware, OEM/PRI for Cisco IoT Polaris Platforms
This section contains the latest modem firmware available for each of the modems used by the Cisco IoT Industrial routers.
Note |
Cisco IOS XE updates do not automatically update the modem firmware. The user should check and update to the latest firmware. See the following table for the latest information: |
See the Cisco Firmware Upgrade Guide for 4G LTE and 5G Cellular Modems for upgrade instructions.
Cellular Module |
Modem |
Firmware Version |
Software Download Link |
---|---|---|---|
P-LTEAP18-GL IRMH-LTEAP18-GL |
LM960 |
32.00.1x7 |
|
P-5GS6-GL |
FN980 |
— |
|
P-LTE-450 |
IPS-701 |
— |
Firmware upgrades are only available through the manufacturer Intelliport. See the 450MHz Category-4 LTE PIM chapter of the Cellular Pluggable Interface Module Configuration Guide. |
P-LTEA-EA IRMH-LTEA-EA |
EM7455 |
02.32.11.00 |
|
P-LTEA-LA IRMH-LTEA-LA |
EM7430 |
02.33.03.00 |
|
P-LTE-VZW |
WP7601 |
02.37.0x.00 |
|
P-LTE-US |
WP7603 |
02.37.0x.00 |
|
P-LTE-JN |
WP7605 |
02.28.03 |
|
P-LTE-GB |
WP7607 |
02.37.03.05 |
|
P-LTE-IN |
WP7608 |
02.28.03 |
|
P-LTE-AU |
WP7609 |
02.28.03 |
|
P-LTE-MNA |
WP7610 |
02.37.0x.00 |
New Features in Cisco IOS XE 17.12.2
There are no new features with this release. It is maintenance only.
Related Documentation
Cisco Catalyst IR1101 Rugged Series Router
Cisco Catalyst IR1800 Rugged Series Router
Cisco Catalyst IR8140 Heavy Duty Series Router
Cisco Catalyst IR8340 Rugged Series Router
Cisco ESR6300 Embedded Series Router
Product Independent Documentation
Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide
Cisco IoT Field Network Director
Known Limitations
Smart Licensing Using Policy
Starting with Cisco IOS XE 17.6.1, with the introduction of Smart Licensing Using Policy, even if you configure a hostname for a product instance or device, only the Unique Device Identifier (UDI) is displayed. This change in the display can be observed in all licensing utilities and user interfaces where the hostname was displayed in earlier releases. It does not affect any licensing functionality. There is no workaround for this limitation.
The licensing utilities and user interfaces that are affected by this limitation include only the following: Cisco Smart Software Manager (CSSM), Cisco Smart License Utility (CSLU), and Smart Software Manager On-Prem (SSM On-Prem).
IOx on the ESR6300
Note |
IOx development is not supported on the ESR6300. While this is platform independent code, it is unsupported and untested on this device. |
Expansion Module on the IR1101
The expansion module IR1101 does not support +1500 MT size on LAN interfaces. See this Caveat for details.
Standalone MAC Authentication Bypass (MAB) Limitation
Standalone MAC Authentication Bypass (MAB) is an authentication method that grants network access to specific MAC addresses regardless of 802.1X capability or credentials. The IR1100 crashes with concurrent IPSec traffic and macsec traffic (device to client).
Refer to the following table for details:
Details |
Release Affected |
Release Fixed |
||
---|---|---|---|---|
MAB/Dot1x may not work if the global type-6 encryption setting is enabled. If users still want to use MAB/Dot1x, they should disable the type-6 encryption and enable type-7 encryption. |
17.4.X 17.5.X 17.6.1 17.6.2 17.7.1 |
17.3.5 Fixed in these future releases: 17.6.3 17.7.2 17.8.1 and later. |
||
dACL and device-tracking features are not supported on the IR1101 and ESR6300 due to a hardware limitation. dACL is supported on the IR1800 series. Therefore, features such as MAB and Dot1x should not be used with the optional dACL/device-tracking enabled. |
|
Hardware limitation, no software fix available. |
Caveats
Caveats describe unexpected behavior in Cisco IOS XE releases. Caveats listed as open in a prior release are carried forward to the next release as either open or resolved.
The Cisco Bug Search Tool (BST) is a gateway to the Cisco bug-tracking system, which maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. The BST provides you with detailed defect information about your products and software.
Open Caveats in Cisco IOS XE 17.12.2
To view the details of a caveat, click on the identifier.
Identifier |
Description |
Platform |
---|---|---|
WAN port LED is not turning off when we shut interface with media-type sfp. |
IR1101 |
|
Modem resets frequently on 17.12.02 with RSSI spikes upto -130 dBm |
Any cellular pluggable module with Sierra Wireless modem |
|
IOX app that makes use of /dev/ttyNMEA may randomly be put in STOPPED state after onboarding |
IR1800 |
|
FN980: ATT sim attached with wrong profile during sim switching. |
P-5GS6-GL |
|
High CF/TE,Turnaround and Latency number after reload of router. |
IR8340 |
|
IR8340 throws CPP/FMAN Download errors on attaching ngsw class-map using etype classification. |
IR8340 |
|
PTP Dot1as Latency accuracy is seen 13ms on latest 1781 image |
IR8340 |
|
PTP Forward mode functionality is not working. |
IR8340 |
|
Last reporter of IGMPV3 report is all "0" if receiver connected on SVI interface. |
IR8340 |
|
IR1100 crashes with concurrent IPSec traffic and macsec traffic (device to client). |
IR1101 |
|
FN980 modem is not showing in show inventory after multiple modem-power cycle. |
P-5GS6-GL |
Resolved Caveats in Cisco IOS XE 17.12.2
To view the details of a caveat, click on the identifier.
Identifier |
Description |
Platform |
---|---|---|
Router crashing because of TDL memory leaks. |
All IoT Routers |
|
APN Profile change in controller context config doesn't take effect. |
IR1101 |
|
IR8340 HSR Ring traffic fails on reload with GLC-FE-100FX-RGD SFP. |
IR8340 |
|
IR1831: Adding CANA oid for CISCO-IGNITION-MIB.my |
IR1831 |
|
Virtual IP not responding to ICMP request on IR1101. |
IR1101 |
|
IR1101 : Ping is not successful after reload the device with switchport config in gi0/0/0 |
IR1101 |
|
Cannot configure G0/0/0 interface on IR1101 using default vManage feature templates. |
IR1101 |
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions, and services, visit Cisco DevNet.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Documentation Feedback
To provide feedback about Cisco technical documentation, use the feedback form available in the right pane of every online document.
Cisco Support Community
Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers. Join the forum at: https://supportforums.cisco.com/index.jspa.
Cisco Bug Search Tool (BST)
The Cisco Bug Search Tool (BST) is a gateway to the Cisco bug-tracking system, which maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. The BST provides you with detailed defect information about your products and software.
Abbreviated Cisco Trademarks
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)