• 8201-SYS

• 8202-SYS

• 8101-32FH

• 8201-32FH

• 8800-LC-36FH

• 88-LC0-36FH-M

• 88-LC0-36FH

• NC57-24DD

• NC57-18DD-SE

• NC57-36H6D-S

• NCS-57B1-6D24-SYS

• NCS-57B1-5DSE-SYS

• A99-10X400GE-X-SE

• A99-10X400GE-X-TR

• A9K-20HG-FLEX-SE

• A9K-20HG-FLEX-TR

• A9K-8HG-FLEX-SE

• A9K-8HG-FLEX-TR

• A9903-20HG-PEC-FC

• NCS-55A2-MOD-S(E)-S

• N540-24Q8L2DD-SYS

• N540-24Q8L2DD-SYS

• NC57-MOD-S

• Support for QDD-400G-ZR-S and QDD-400G-ZRP-S

• OpenConfig support for ZR/ZR+

IOS XR 7.9.1

• NCS-57C3-MOD

• 8x10G SFP+ PLE MPA (NC55-OIP-02)

• NCS-55A2-MOD

• Support for Private Line Emulation using Circuit Emulation (CEM)

• OpenConfig support for ZR/ZR+

• NCS-57C3-MOD

• 8201-32FH

• 8201-24H8FH

• A9K-20HG-FLEX-SE/TR

• A9K-8G-FLEX-SE/TR

• Support for Cisco 400G QSFP-DD High-Power (Bright) Optical Module

• NCS1K-MD-64-C module

• NCS 2000 shelf

• NCS 2000 line cards

Simple optical line systems

SVO, Release 12.3.1

• NCS 1010 shelf

• NCS 1010 line cards

• NCS 1K breakout shelf and modules

• NCS 1K MD32 filters

IOS XR 7.9.1

NETCONF and YANG ZR/ZR+ Programmability

Support for NETCONF and YANG models. NETCONF is a standard based and XML encoded protocol. You can use YANG to create device configuration requests or the requests for operational data.

IOS XR 7.9.1

Telemetry

Support for telemetry data. Model-driven telemetry allows network devices to continuously stream real-time configuration and operating state information to subscribers.

IOS XR 7.9.1

Cisco Evolved Programmable Network Manager

Support for QDD-400G-ZR-S and QDD-400G-ZRP-S optics on Release1.0 GA platforms. It also displays optical performance monitoring and fault data.

Support for NCS 1010 Optical Nodal Assurance

7.0.1

Crosswork Hierarchical Controller

Crosswork Network Controller and Crosswork Hierarchical Controller integration is supported for hierarchical multi-vendor, multi-domain, and multi-layer visualization across service, IP and, optical layers for new deployments and deployments on existing networks. Crosswork Hierarchical Controller supports:

• Routed Optical Networking multi-layer service provisioning

• Routed Optical Networking multi-layer discovery and visualization:

  • Topology and inventory discovery from Cisco Optical Network Controller (optical layer) and Crosswork Network Controller (routing layer)​

  • Optical and routing service discovery from Crosswork Network Controller and Cisco Optical Network Controller

• UI support for Routed Optical Networking service management

• Cross-Link Connectivity Verification between router and NCS 1010 using Link Manager application.

7.0

Cisco Optical Network Controller

Support for ZR/ZR+ wavelength services on Cisco NCS 2000 and NCS 1010 devices Cisco Optical Network Controller is an optical domain controller. Cisco Optical Network Controller supports a standardized TAPI model. Cisco Optical Network Controller enables connection verification between NCS 1010 nodes and breakout modules. Connection verification measures power levels and verifies the optical cables and patchcords in a node for connectivity and insertion loss.

2.1

Cisco Crosswork Network Controller

Cisco Crosswork Network Controller is a network automation solution for deploying and operating IP transport networks. Its unified user interface allows real-time visualization of the network topology and services, as well as service and transport provisioning. Cisco Crosswork Network Controller is the IP domain controller.

Crosswork Optimization Engine manages SR-TE Policy and RSVP-TE tunnel lifecycle. Circuit Style Manager in Crosswork Optimization Engine also enables Circuit-Style SR-TE Bandwidth Call Admission Control.

5.0

NSO Routed Optical Networking Core Function Pack

Supports unified IP and optical provisioning for ZR/ZR+ optics on Cisco routers.

2.1

Cisco Optical Network Planner

Support for designing and validating networks of the NCS 2000 series and NCS 1010 devices. Cisco ONP must be used to perform the final network feasibility analysis and generate production network designs.

5.1

Cisco WAN Automation Engine

Support for creating and maintaining a model of the current network through the continual monitoring and analysis of the network and the traffic demands that are placed on it. This tool is used for IP planning.

7.6.2