First Published: April 1, 2024

Last Updated: April 10, 2024

Release 7.11.2 Packages


Note

Traffic impact and Frame Check Sequence (FCS) errors are observed while downgrading NCS 1010 software from R7.11.x to R7.9.1.

Release 7.11.2 Packages for Cisco NCS 1010

The Cisco IOS XR chassis is composed of a base image (ISO) that provides the XR infrastructure. The ISO image is made up of a set of packages (also called RPMs). These packages are of three types:

  • A mandatory package that is included in the ISO

  • An optional package that is included in the ISO

  • An optional package that is not included in the ISO

Table 1. Release 7.11.2 Packages for Cisco NCS 1010

Feature Set

Filename

Description

Composite Package

Cisco IOS XR Core Bundle + Manageability Package

ncs1010-x64-7.11.2.iso

Contains required core packages, including operating system, Admin, Base, Forwarding, SNMP Agent, FPD, and Alarm Correlation and Netconf-yang, Telemetry, Extensible Markup Language (XML) Parser, HTTP server packages.

Individually Installable Packages

Cisco IOS XR Telnet Package

xr-telnet-7.11.2.x86_64.rpm

xr-telnet-ncs1010-7.11.2.x86_64.rpm

Install the xr-telnet-7.11.2.x86_64.rpm and xr-telnet-ncs1010-7.11.2.x86_64.rpm packages to support Telnet.
Cisco IOS XR Cisco Discovery Protocol (CDP) Package

xr-cdp-7.11.2.x86_64.rpm

xr-cdp-ncs1010-7.11.2.x86_64.rpm

Install the xr-cdp-7.11.2.x86_64.rpm and xr-cdp-ncs1010-7.11.2.x86_64.rpm to support CDP.
COSM Package

xr-cosm-ncs1010-7.11.2.x86_64.rpm

xr-cosm-82eb6a4d2fa15d0e-7.11.2.x86_64.rpm

xr-cosm-7.11.2.x86_64.rpm

Install the xr-cosm-ncs1010-7.11.2.x86_64.rpm, xr-cosm-82eb6a4d2fa15d0e-7.11.2.x86_64.rpm, and xr-cosm-7.11.2.x86_64.rpm to support COSM.

See Install Packages and RPMs.

Limitation

  • The Cisco Optical Site Manager application is currently running as a container through the Third Party Application (TPA) infrastructure. When TPA packets are not directed to the device subnet, they are sent out with a source address that matches the loopback interface with the lower index. This can lead to issues with routing through the default gateway.

  • NCS 1010 and NCS 1014 require an additional reload after USB insertion because the system does not automatically generate a USB boot entry upon user-initiated reload.

Caveats

Open Caveats

NCS1010

The following table lists the open caveats for NCS 1010:

Identifier

Headline

CSCwi33752

NCS1010:TX drops seen on Mgmt 0 when telemetry is streamed

CSCwh40303

[NCS1010/NCS1014] USB Boot entry is not getting created at runtime

CSCwf47073

IPv6 PXE gets stuck while copying the image

CSCwj29487

NCS1010:Console got stuck post software upgrade from 7111CCO to 7112_08I image

Cisco Optical Site Manager

The following table lists the open caveats for Cisco Optical Site Manager:

Identifier

Headline

CSCwh38869

[COSM]: No mechanism is available on COSM to get the software activation failure cause from platform

CSCwi62714

[COSM]: Device doesn't comes up as HA after switchover, reload

CSCwh28935

[COSM]:Sometimes getting error "SshExec connect failed due to Auth fail" as response of download/act

CSCwi90819

[COSM]: On card mode reconfiguration, non-default config values not shown correctly in COSM

CSCwj51382

NCS1010 COSM: MD32E is showing as BRK-8

CSCwi42836

[COSM]: From Sw Package ID, user is unable to get whether the package is for NCS1010 or NCS1004 in web

CSCwj12140

NCS1010: COSM:on RP0 swap or replacement, COSM misbehaves

Using Bug Search Tool

You can use the Cisco Bug Search Tool to search for a specific bug or to search for all bugs in a release.

Procedure

Step 1

Go to the http://tools.cisco.com/bugsearch.

Step 2

Log in using your registered Cisco.com username and password.

The Bug Search page opens.

Step 3

Use any of these options to search for bugs, and then press Enter (Return) to initiate the search:

  • To search for a specific bug, enter the bug ID in the Search For field.

  • To search for bugs based on specific criteria, enter search criteria, such as a problem description, a feature, or a product name, in the Search For field.

  • To search for bugs based on products, enter or select a product from the Product list. For example, if you enter “WAE,” you get several options from which to choose.

  • To search for bugs based on releases, in the Releases list select whether to search for bugs affecting a specific release, bugs that were fixed in a specific release, or both. Then enter one or more release numbers in the Releases field.

Step 4

When the search results are displayed, use the filter tools to narrow the results. You can filter the bugs by status, severity, and so on.

To export the results to a spreadsheet, click Export Results to Excel.

Determine Software Version

NCS 1010

Log in to NCS 1010 and enter the show version command. 

RP/0/RP0/CPU0:ios#show version

Fri Mar 29 03:21:07.915 UTC

Cisco IOS XR Software, Version 7.11.2 LNT

Copyright (c) 2013-2024 by Cisco Systems, Inc.

 

Build Information:

Built By     : swtools

Built On     : Thu Mar 28 06:07:06 UTC 2024

Build Host   : iox-lnx-159

Workspace    : /auto/srcarchive11/prod/7.11.2/ncs1010/ws/

Version      : 7.11.2

Label        : 7.11.2

 

cisco NCS1010 (C3758 @ 2.20GHz)

cisco NCS1010-SA (C3758 @ 2.20GHz) processor with 32GB of memory

R1 uptime is 22 minutes

NCS 1010 - Chassis

Determine Firmware Version

Use the show hw-module fpd command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be CURRENT; The Running and Programed version must be the same.

NCS 1010

Log in to node and enter the show hw-module fpd command. 

RP/0/RP0/CPU0:ios#show hw-module fpd

Fri Mar 29 03:21:11.191 UTC

 

Auto-upgrade:Enabled

Attribute codes: B golden, P protect, S secure, A Anti Theft aware

                                                                         FPD Versions

                                                                        ==============

Location   Card type             HWver FPD device       ATR Status   Running Programd  Reload Loc

-------------------------------------------------------------------------------------------------

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  ADMConfig            CURRENT    3.40    3.40       NOT REQ

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  BIOS             S   CURRENT    4.60    4.60         0/RP0

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  BIOS-Golden      BS  CURRENT            4.10         0/RP0

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  CpuFpga          S   CURRENT    1.11    1.11         0/RP0

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  CpuFpgaGolden    BS  CURRENT            1.01         0/RP0

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  SsdMicron5300    S   CURRENT    0.01    0.01         0/RP0

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  TamFw            S   CURRENT    6.13    6.13         0/RP0

0/RP0/CPU0 NCS1010-CNTLR-K9      1.11  TamFwGolden      BS  CURRENT            6.11         0/RP0

0/PM0      NCS1010-AC-PSU        0.0   AP-PriMCU            CURRENT    1.03    1.03       NOT REQ

0/PM0      NCS1010-AC-PSU        0.0   AP-SecMCU            CURRENT    2.01    2.01       NOT REQ

0/PM1      NCS1010-AC-PSU        0.0   AP-PriMCU            CURRENT    1.03    1.03       NOT REQ

0/PM1      NCS1010-AC-PSU        0.0   AP-SecMCU            CURRENT    2.01    2.01       NOT REQ

0/0/NXR0   NCS1K-OLT-C           0.1   OLT              S   CURRENT    3.00    3.00       NOT REQ

0/Rack     NCS1010-SA            1.0   EITU-ADMConfig       CURRENT    2.10    2.10       NOT REQ

0/Rack     NCS1010-SA            1.0   IoFpga           S   CURRENT    1.16    1.16       NOT REQ

0/Rack     NCS1010-SA            1.0   IoFpgaGolden     BS  CURRENT            1.01       NOT REQ

0/Rack     NCS1010-SA            1.0   SsdIntelS4510    S   CURRENT   11.32   11.32        0/Rack

0/1        NCS1K-BRK-8           1.0   BRK-8            S   CURRENT    2.08    2.08       NOT REQ

0/2        NCS1K-MD-32E-C        10.2  MD-32-ACC        S   CURRENT    2.18    2.18       NOT REQ

0/3        NCS1K-MD-32O-C        10.2  MD-32-ACC        S   CURRENT    2.18    2.18       NOT REQ

Supported MIBs

The MIB Locator tool on Cisco Feature Navigator (CFN) provides access to NCS 1010 MIBs.