Release Notes for Cisco IAD2430 Series Integrated Access Devices with Cisco IOS Release 12.4(15)XY

Table Of Contents

Release Notes for Cisco IAD2430 Series Integrated Access Devices with Cisco IOS Release 12.4(15)XY

Contents

Introduction

Cisco IAD 2430 Series Integrated Access Device

Port Numbering

MGCP Endpoint Naming Convention

System Requirements

Memory Requirements

Hardware Supported

Determining the Software Version

Upgrading to a New Software Release

Feature Set Tables

New and Changed Information

New Hardware Features in Cisco IOS Release 12.4(15)XY5

New Software Features in Cisco IOS Release 12.4(15)XY5

New Hardware Features in Cisco IOS Release 12.4(15)XY4

New Software Features in Cisco IOS Release 12.4(15)XY4

New Hardware Features in Cisco IOS Release 12.4(15)XY3

New Software Features in Cisco IOS Release 12.4(15)XY3

New Hardware Features in Cisco IOS Release 12.4(15)XY2

New Software Features in Cisco IOS Release 12.4(15)XY2

New Hardware Features in Cisco IOS Release 12.4(15)XY1

New Software Features in Cisco IOS Release 12.4(15)XY1

Transparent Tunneling of QSIG over SIP-TDM Gateway

SIP SRTP fallback to non-secure RTP

Pass data in SIP REFER to triggered INVITE, control media-cut through on SIP 18x response

New Hardware Features in Cisco IOS Release 12.4(15)XY

New Software Features in Cisco IOS Release 12.4(15)XY

Cisco Unified SRST and Cisco Unified CME

New Features in Release 12.4T

Limitations and Restrictions

Caveats

Open Caveats - Cisco IOS Release 12.4(15)XY5

Resolved Caveats - Cisco IOS Release 12.4(15)XY5

Open Caveats - Cisco IOS Release 12.4(15)XY4

Resolved Caveats - Cisco IOS Release 12.4(15)XY4

Open Caveats - Cisco IOS Release 12.4(15)XY3

Resolved Caveats - Cisco IOS Release 12.4(15)XY3

Open Caveats - Cisco IOS Release 12.4(15)XY2

Resolved Caveats - Cisco IOS Release 12.4(15)XY2

Open Caveats - Release 12.4(15)XY1

Resolved Caveats - Release 12.4(15)XY1

Open Caveats - Cisco IOS Release 12.4(15)XY

Resolved Caveats - Cisco IOS Release 12.4(15)XY

Additional References

Release-Specific Documents

Platform-Specific Documents

Cisco IOS Software Documentation Set

Documentation Modules

Notices

Release Notes for Cisco IAD2430 Series Integrated Access Devices with Cisco IOS Release 12.4(15)XY

---

First Released: December 17, 2007

Last Revised: March 25, 2009

Cisco IOS Release 12.4(15)XY5

OL-15503-03 Fifth Release

These release notes for the Cisco IAD2430 Series Integrated Access Devices (IAD) describe the product-related enhancements provided in Cisco IOS Release 12.4(15)XY. These release notes are updated as needed.

For a list of the software caveats that apply to Cisco IOS Release 12.4(15)XY, see "Caveats" section. See also Caveats for Cisco IOS Release 12.4(15)T, which is updated for every maintenance release.

Use these release notes with Cross-Platform Release Notes for Cisco IOS Release 12.4T and About Cisco IOS Release Notes.

We recommend that you view the field notices for this release to see if your software or hardware platforms are affected.

Contents

These release notes describe the following topics:

•Introduction

•System Requirements

•New and Changed Information

•Limitations and Restrictions

•Caveats

•Additional References

•Notices

Introduction

The Cisco IAD2430 is the next generation integrated voice and data services platform for Service Providers, building on the industry leading Cisco IAD2420 series IAD. The Cisco IAD2430 series offers a major leap forward in price performance and enhanced software functionality such as MGCP SRST used to accelerate the migration from time division multiplexing (TDM) to VoIP cost efficiently. The Cisco IAD2430 series harnesses the maturity of the Cisco IAD2420 series software and enhances functionality by providing more capabilities such as denser interfaces (up to 24 FXS and up to 2 voice or 2 data T1s), encryption, and DC power back up while maintaining it's 1RU form factor for space saving Service Provider Managed Services deployment.

For information on new features and Cisco IOS commands supported by Cisco IOS Release 12.4(15)XY, see the "New and Changed Information" section.

Cisco IAD 2430 Series Integrated Access Device

The Cisco IAD2430 Series Integrated Access Device consists of the following five models:

•Cisco 2430-24FXS IAD

•Cisco 2431-8FXS IAD

•Cisco 2431-16FXS IAD

•Cisco 2431-1T1E1 IAD

•Cisco 2432-24FXS IAD

The following WAN interface cards (WICs) and Voice Interface Cards (VICs) are supported:

•VIC2-2FXO

•VIC2-2FXS

•VIC-4FXS/DID

•VIC2-2BRI-NT/TE

•VWIC-2MFT-T1

•VWIC-2MFT-E1

•WIC-1T

•WIC-1ADSL

•WIC-1SHDSL

•WIC-1ADSL-DG

•WIC-1SHDSL-V2

Port Numbering

Port numbering conventions for the Cisco IAD2430 Series Integrated Access Device differs from the Cisco IAD2420 Series Integrated Access Device:

•An external compact flash card is numbered slot 0.

•10/100Base-T Fast Ethernet ports are numbered Fast Ethernet 0/0 and Fast Ethernet 0/1 from right to left.

•T1/E1 ports are numbered T1 or E1 1/0 and T1 or E1 1/1 from right to left.

•The slot for WICs and VICs is numbered slot 0. WIC and VIC interfaces are numbered by interface face with this slot number and an interface number, beginning with 0 and running from right to left.

•FXS voice port numbering begins at 2/0 and extends to 2/7, 2/15, or 2/23, depending on the number of voice ports.

MGCP Endpoint Naming Convention

The Media Gateway Control Protocol (MGCP) endpoint naming convention for Cisco IAD2430 Series IAD differs from the Cisco IAD2420 Series IAD. The MGCP naming convention for the Cisco IAD2430 Series IAD is the following:

Cisco IAD2431-1T1E1

S1/DS1-0/1@iad2430-digital
S1/DS1-0/2@iad2430-digital
. . .
S1/DS1-0/24@iad2430-digital

S1/DS1-1/1@iad2430-digital
S1/DS1-1/2@iad2430-digital
. . .
S1/DS1-1/24@iad2430-digital

Cisco IAD2430-24FXS, IAD2431-8FXS, IAD2431-16FXS, IAD2432-24FXS

AALN/S2/0@iad2430-analog
AALN/S2/1@iad2430-analog
. . .
AALN/S2/23@iad2430-analog

Voice Analog Ports

AALN/S0/0@iad2430-analog
AALN/S0/1@iad2430-analog
AALN/S0/2@iad2430-analog
AALN/S0/3@iad2430-analog

System Requirements

This section describes the system requirements for the Cisco IOS Release 12.4(15)XY releases and includes the following sections:

•Memory Requirements

•Hardware Supported

•Determining the Software Version

•Upgrading to a New Software Release

•Feature Set Tables

Memory Requirements

Table 1 lists the memory recommendations of the Cisco IOS feature sets for the Cisco IAD2430 series IAD for Cisco IOS Release 12.4(15)XY. Cisco IAD2430 series IAD are available with a 32-MB Flash memory card.

Table 1 Cisco Release 12.4(15)XY Memory Requirements for the Cisco IAD2430 Series IAD 

Platform	Feature Set	Software Image	Flash Memory (MB)	DRAM Memory (MB)	Runs From
Cisco IAD2430	Cisco 2430 Series IOS IP Subset/IPSEC 64BIT/FW/Voice	c2430-i6k9o3s-mz	64	128	RAM
	Cisco 2430 Series IOS IP Subset/Voice	c2430-i6s-mz	64	128	RAM
Cisco IAD2431 Cisco IAD2432	Cisco 2430 Series IOS IP Plus/IPsec 64BIT/FW/Voice	c2430-ik9o3s-mz	64	128	RAM
	Cisco 2430 Series IOS IP Plus	c2430-is-mz	64	128	RAM

Hardware Supported

Cisco IOS Release 12.4(15)XY supports the following platforms:

•Cisco IAD2430

•Cisco IAD2431

•Cisco IAD2432

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

Determining the Software Version

To determine the version of Cisco IOS software currently running on your Cisco IAD2430 series router, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.

Upgrading to a New Software Release

For general information about upgrading to a new software release, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.

Feature Set Tables

For information about Feature Set Tables, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.

New and Changed Information

The following sections list the new hardware products and software features supported by the Cisco IAD2430 series IAD in Cisco IOS Release 12.4(11)XY:

•New Hardware Features in Cisco IOS Release 12.4(15)XY5

•New Software Features in Cisco IOS Release 12.4(15)XY5

•New Hardware Features in Cisco IOS Release 12.4(15)XY4

•New Software Features in Cisco IOS Release 12.4(15)XY4

•New Hardware Features in Cisco IOS Release 12.4(15)XY3

•New Software Features in Cisco IOS Release 12.4(15)XY3

•New Hardware Features in Cisco IOS Release 12.4(15)XY2

•New Software Features in Cisco IOS Release 12.4(15)XY2

•New Hardware Features in Cisco IOS Release 12.4(15)XY1

•New Software Features in Cisco IOS Release 12.4(15)XY1

•New Hardware Features in Cisco IOS Release 12.4(15)XY

•New Software Features in Cisco IOS Release 12.4(15)XY

•New Features in Release 12.4T

New Hardware Features in Cisco IOS Release 12.4(15)XY5

There are no new hardware features in this release.

New Software Features in Cisco IOS Release 12.4(15)XY5

There are no new software features in this release.

New Hardware Features in Cisco IOS Release 12.4(15)XY4

There are no new hardware features in this release.

New Software Features in Cisco IOS Release 12.4(15)XY4

The are no new software features in this release.

New Hardware Features in Cisco IOS Release 12.4(15)XY3

There are no new hardware features in this release.

New Software Features in Cisco IOS Release 12.4(15)XY3

The are no new software features in this release.

New Hardware Features in Cisco IOS Release 12.4(15)XY2

There are no new hardware features in this release.

New Software Features in Cisco IOS Release 12.4(15)XY2

The are no new software features in this release.

New Hardware Features in Cisco IOS Release 12.4(15)XY1

There are no new hardware features in this release.

New Software Features in Cisco IOS Release 12.4(15)XY1

The new software features are:

•Transparent Tunneling of QSIG over SIP-TDM Gateway

•SIP SRTP fallback to non-secure RTP

•Pass data in SIP REFER to triggered INVITE, control media-cut through on SIP 18x response

Transparent Tunneling of QSIG over SIP-TDM Gateway

The "Transparent Tunneling of QSIG over SIP-TDM Gateway" feature provides transparent transport of QSIG-protocol ISDN messages across the SIP trunk. In 12.4(15)XY1, this solution is supported only for QSIG protocol messages, unlike H.323 gateways, which tunnel any raw message. This solution encapsulates QSIG messages within SIP message bodies using application/qsig MIME to tunnel between SIP endpoints. This solution does not add any QSIG services to SIP interworking.

In 12.4(15)XY1, QSIG tunneling is supported only on SIP-TDM gateways with ISDN PRI or BRI. So Cisco Unified Border Element (Cisco UBE), formerly known as the Cisco IOS Session Border Controller (SBC) or the Cisco Multiservice IP-to-IP Gateway, cannot yet utilise this feature.

SIP SRTP fallback to non-secure RTP

The "SIP SRTP fallback to non-secure RTP" feature provides compatibility with Cisco Unified Communications Manager, version 7.0 . SRTP fallback to RTP was previously supported between two gateways. Now, with a new negotiation method introduced in release 12.4(15)XY1, support for this feature is provided between the gateways and the Cisco Unified Communications Manager as well.

Pass data in SIP REFER to triggered INVITE, control media-cut through on SIP 18x response

The control media-cut through on SIP 18x response feature provides the ability to send media backward even before the call is established. So instead of allowing media to flow both ways only after the call is established, this feature allows the remote side to send a personalized ringback tone (usually music) as a response even before the call is established.

Doing only backward media cut-through on 18x messages affects the digit collection process (RFC 2833 mechanism) before the call is connected (SIP 200 OK message is sent and accepted). Since most of the SIP IVR deployments use RFC 2833 to collect digits before a call is connected, the current default behavior (bidirectional media cut-through on 18x) is retained.

The Pass data in SIP REFER to triggered INVITE feature provides the ability to map SIP REFER message data into SIP INVITE messages. This new feature allows you to send customer-specific information to triggered SIP INVITE messages using Call-Info as the URL header of the SIP REFER-TO message. Further, this feature allows the gateway to take SIP REFER data and create a new SIP INVITE message to a new destination when a call is being placed to an Interactive Voice Response (IVR) endpoint and the IVR refers the call to an agent or to another IVR system.

New Hardware Features in Cisco IOS Release 12.4(15)XY

There are no new hardware features in this release.

New Software Features in Cisco IOS Release 12.4(15)XY

Cisco Unified SRST and Cisco Unified CME

Enhanced 911 Services for Cisco Unified SRST and Cisco Unified CME enables 911 operators to:

•Immediately pinpoint the location of the 911 caller based on the calling number

•Callback the 911 caller if a disconnect occurs

Before this feature was introduced, Cisco Unified CME supported only outbound calls to 911. With basic 911 functionality, calls were simply routed to a public safety answering point (PSAP). The 911 operator at the PSAP would then have to verbally gather the emergency information and location from the caller, before dispatching a response team from the ambulance service, fire department, or police department. Calls could not be routed to different PSAPs, based on the specific geographic areas that they cover.

With Enhanced 911 Services, 911 calls are selectively routed to the closest PSAP based on the caller's location. In addition, the caller's phone number and address automatically display on a terminal at the PSAP. Therefore, the PSAP can quickly dispatch emergency help, even if the caller is unable to communicate the location. Also, if the caller disconnects prematurely, the PSAP has the information it needs to contact the 911 caller.

New Features in Release 12.4T

For information regarding the features supported in Cisco IOS Release 12.4T, see the Cross-Platform Release Notes links at : http://www.cisco.com/en/US/products/ps6441/prod_release_notes_list.html

Limitations and Restrictions

There are no known limitations or restrictions in this release.

Caveats

For general information on caveats and the bug toolkit, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.

This section contains the following caveat information:

•Open Caveats - Cisco IOS Release 12.4(15)XY5

•Resolved Caveats - Cisco IOS Release 12.4(15)XY5

•Open Caveats - Cisco IOS Release 12.4(15)XY4

•Resolved Caveats - Cisco IOS Release 12.4(15)XY4

•Open Caveats - Cisco IOS Release 12.4(15)XY3

•Resolved Caveats - Cisco IOS Release 12.4(15)XY3

•Open Caveats - Cisco IOS Release 12.4(15)XY2

•Resolved Caveats - Cisco IOS Release 12.4(15)XY2

•Open Caveats - Release 12.4(15)XY1

•Resolved Caveats - Release 12.4(15)XY1

•Open Caveats - Cisco IOS Release 12.4(15)XY

•Resolved Caveats - Cisco IOS Release 12.4(15)XY

Open Caveats - Cisco IOS Release 12.4(15)XY5

There are no open caveats in this release.

Resolved Caveats - Cisco IOS Release 12.4(15)XY5

•CSCsv04836

Multiple Cisco products are affected by denial of service (DoS) vulnerabilities that manipulate the state of Transmission Control Protocol (TCP) connections. By manipulating the state of a TCP connection, an attacker could force the TCP connection to remain in a long-lived state, possibly indefinitely. If enough TCP connections are forced into a long-lived or indefinite state, resources on a system under attack may be consumed, preventing new TCP connections from being accepted. In some cases, a system reboot may be necessary to recover normal system operation. To exploit these vulnerabilities, an attacker must be able to complete a TCP three-way handshake with a vulnerable system.

In addition to these vulnerabilities, Cisco Nexus 5000 devices contain a TCP DoS vulnerability that may result in a system crash. This additional vulnerability was found as a result of testing the TCP state manipulation vulnerabilities.

Cisco has released free software updates for download from the Cisco website that address these vulnerabilities. Workarounds that mitigate these vulnerabilities are available.

This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090908-tcp24.shtml.

CSCsm97220

Devices that are running Cisco IOS Software and configured for Mobile IP Network Address Translation (NAT) Traversal feature or Mobile IPv6 are vulnerable to a denial of service (DoS) attack that may result in a blocked interface.

Cisco has released free software updates that address these vulnerabilities.

This advisory is posted at the following link http://www.cisco.com/warp/public/707/cisco-sa-20090325-mobileip.shtml

CSCsr29468

Cisco IOS software contains a vulnerability in multiple features that could allow an attacker to cause a denial of service (DoS) condition on the affected device. A sequence of specially crafted TCP packets can cause the vulnerable device to reload.

Cisco has released free software updates that address this vulnerability.

Several mitigation strategies are outlined in the workarounds section of this advisory.

This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090325-tcp.shtml

CSCso04657

Symptom    SSLVPN service stops accepting any new SSLVPN connections.

Conditions   A device configured for SSLVPN may stop accepting any new SSLVPN connections, due to a vulnerability in the processing of new TCP connections for SSLVPN services. If "debug ip tcp transactions" is enabled and this vulnerability is triggered, debug messages with connection queue limit reached will be observed. This vulnerability is documented in two separate Cisco bug IDs, both of which are required for a full fix: CSCso04657 and CSCsg00102.

CSCsk40676 C1812 12.4.15.T / certain pkt size block inside interface of ezvpn conn.

Symptom    The inside interface of a Cisco router running EZVPN may become unresponsive when sending ICMP messages from a remote VPN client connection.

Conditions   Occurs when LZS compression is used on a Windows Vista client.

Workaround   Disable LZS compression.

CSCse85652 HTTP should deny access if no enable password is configured.

CSCsg04630 7600BB: DHCP:STB crash MEM corruption at 
dhcpd_add_binding_to_radix_tree.

CSCsk32970 ccm switchover fails as ACL does not deny properly.

Symptom    Alternative packets are not being dropped by Extended ACL with deny statements in cef switching path.

Conditions   When CEF is enabled.

Workaround   Disable CEF or use standard ACL.

CSCsk58014 Module fails to boot up after reset.

Symptom    The module will not return to the steady state after a reset.

Conditions   This symptom is observed whenever the module is reset.

Workaround   There is no workaround.

CSCsk61991 dsl controller with auto linemode is down with peer in 4-wire linemode.

Symptom    Ping failure is seen over ATM interface in 4-wire line mode as the ATM interface does not come up.

Conditions   With the UUT configured as auto the ATM interface continues to be down after the peer changes from 2-wire to 4-wire enhanced. This happens only on WIC-1SHDSL with UUT configured as auto which is not recommended.

Workaround   Do not configure the line mode as auto.

CSCsk63655 MGCP gateway returns 524 instead of 200 for a valid LCO param in CRCX.

Symptom    A Media Gateway Control Protocol (MGCP) gateway may return a 524 or 510 error code with the reason as "invalid local connection option" for a valid "L:" parameter in a CRCX message.

Conditions   The symptoms can be observed on a router that is running Cisco IOS Interim Release 12.4(17.4)T1 or later, when the <CmdBold>debug mgcp parser<noCmdBold> command with verbose tracelevel is disabled.

Workaround   Enable <CmdBold>debug mgcp parser<noCmdBold> with verbose tracelevel.

CSCsk70060 crafted packets to UDP port 2887 with AP HWIC may cause queue wedge.

Symptom    Crafted packets to UDP port 2887 with AP HWIC may cause queue wedge.

Conditions   The router must have AP HWIC installed, and UDP port 2887open.

Workaround   None.

CSCsk92135 UUT with ADSL over POTS card goes to hang state while booting IOS.

Symptom    Routers with ADSL over POTS card hang on booting Cisco IOS Release 12.4(16.14)T4 and above.

Conditions   Issue seems to be specific to the ADSL over POTS card.

Workaround   There is no workaround.

CSCsk93241 Chunk memory corruption on LFDp Input Proc.

Cisco IOS Software Multi Protocol Label Switching (MPLS) Forwarding Infrastructure (MFI) is vulnerable to a Denial of Service (DoS) attack from specially crafted packets. Only the MFI is affected by this vulnerability. Older Label Forwarding Information Base (LFIB) implementation, which is replaced by MFI, is not affected. Cisco has released free software updates that address this vulnerability.

This advisory is posted at

http://www.cisco.com/warp/public/707/cisco-sa-20080924-mfi.shtml

CSCsl04399 PRI FAX calls failing for E1 controller.

Symptom    Fax call is aborted while testing PRI E1 feature.

Conditions   Occurs in routers running a pre-release version of Cisco IOS Release 12.4(15)T2.

Workaround   Use the <CmdBold>fax rate disable<noCmdBold> command to disable the fax relay feature under the VoIP dialpeer.

CSCsl22080 12.4.15T: WebVPN stops working with TCP connection queue limit reached.

Symptom    WebVPN hangs after a few days of working. When this happens, no WebVPN connections are active and no new connections can be established. The <CmdBold>debug ip tcp transaction<noCmdBold> command shows <CmdBold>connection queue limit reached: port 443<noCmdBold> errors. The <CmdBold>show tcp brief<noCmdBold> command displays many sessions in SYNRCVD and TIMEWAIT states. Problem is recovered either by reload or by entering the <CmdBold>clear tcp tcb *<noCmdBold> command. There are few stale sessions in CLOSED state left after clearing TCP.

Conditions   Issue seen in Cisco IOS Release 12.4.15T and Cisco IOS Release 12.4.15T1 when WebVPN is configured. The issue is intermittent and happens after a few days or weeks of working.

Workaround   To restore TCP connectivity, issue <CmdBold>clear tcp tcb *<noCmdBold> or reload the router. Note that this will clear all TCP sessions on the router.

CSCsm45113 RIB installs duplicate routes for the same prefix.

Symptom    Router may install duplicate routes or incorrect route netmask into routing table. It could happen on any routing protocol. Additionally, for OSPF, crash was observed.

Conditions   The problem is triggered by SNMP polling of ipRouteTable MIB. The problem is introduced by CSCsj50773, see the Integrated-in field of CSCsj50773 for affected images.

Workaround   Do not poll ipRouteTable MIB, poll newer replacement ipForward MIB, instead. The ipRouteTable MIB was replaced by ipForward MIB in RFC 1354.

Further Problem Description: The <CmdBold>clear ip route *<noCmdBold> command can correct the routing table until the next poll of ipRouteTable MIB.

CSCso18940 snmpwalk on 'ipRouteTable' returns error - OID not increasing. 

CSCso60174 Multiple duplicate descriptions found for mmoip aaa commands.

CSCsq15993 PBR is not supported in CEF switching path on 12.4(15)XY release

CSCsr15478 Input Queue Wedging.

Symptom    An input wedge is observed on an interface, when multicast traffic is flowing.

Conditions   The symptom is observed in a DMVPN hub-spoke scenario with a point-to-multipoint (P2MP) GRE tunnel having tunnel protection configuration. When multicast traffic flows from hub to spoke through these tunnel interfaces, the incoming interface of the hub is getting wedged and even the ping to peer stops working.

Workaround   There is no workaround, other than reloading the router.

CSCsu64215 ip tcp adjust-mss command results in packet loss for non-TCP traffic.

Open Caveats - Cisco IOS Release 12.4(15)XY4

There are no open caveats in this release.

Resolved Caveats - Cisco IOS Release 12.4(15)XY4

•CSCsq58779

Cisco IOS devices that are configured for Cisco Unified Communications Manager Express (CME) and the Extension Mobility feature are vulnerable to a buffer overflow vulnerability. Successful exploitation of this vulnerability may result in the execution of arbitrary code or a Denial of Service (DoS) condition on an affected device.

Cisco has released free software updates that address this vulnerability.

This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090923-cme.shtml

CSCso56129 %SYS-2-BADSHARE: Bad refcount in datagram_done monitoring cme/cue calls

Symptom    Bad Refcount is seen with tracebacks.

Conditions   Using AIM-IPS-K9 to monitor interfaces with ephones registered to the CME on the same router and have ephone check voice mail. This is in a branch in a box setup. UUT serves as a CME as well as having the voice mail AIM in the same router.

Workaround   There is no workaround.

CSCso66843 CUBE and CME do not change embedded SSRC in RTCP packets

Symptom    Different SSRC in RTCP compared to RTP after transcoding.

Conditions   Voice call with transcoding in CUBE or CME.For a voice call passing through transcoding on CUBE or CME, the SSRC value contained within the RTCP is passed unchanged, whereas the SSRC value contained within the RTP is changed. This creates a mismatch between the SSRC between RTP and RTCP at the final destination.

Workaround   There is no workaround.

CSCso67655 S2 CFD: Secure DSPFarm doesn't register after a reload of the router

Symptom    After Reolad Secure Conference profile does not register with CCM.

Conditions   This happens when a specific trustpoint is specified for CCM cert authentication during TLS handshake.

Workaround   The workaround is not to specify the truspoint when configuring callmanger CCM using CLI "sccp ccm <ip address> tag version <x>.

CSCsq44013 View used twice with logging enabled

Symptom    The CPE does not reply to the DNS query from the client for the first try, first response is being dropped.

Conditions   This is seen on a router running 12.4T IOS image configured with split DNS.

Workaround   There is no workaround.

Open Caveats - Cisco IOS Release 12.4(15)XY3

There are no open caveats in this release.

Resolved Caveats - Cisco IOS Release 12.4(15)XY3

CSCsk62253

Cisco IOS software contains two vulnerabilities within the Cisco IOS WebVPN or Cisco IOS SSLVPN feature (SSLVPN) that can be remotely exploited without authentication to cause a denial of service condition. Both vulnerabilities affect both Cisco IOS WebVPN and Cisco IOS SSLVPN features:

1. Crafted HTTPS packet will crash device - Cisco Bug ID CSCsk62253.

2. SSLVPN sessions cause a memory leak in the device - Cisco Bug ID CSCsw24700.

Cisco has released free software updates that address these vulnerabilities. There are no workarounds that mitigate these vulnerabilities. This advisory is posted at the following link: http://www.cisco.com/warp/public/707/cisco-sa-20090325-webvpn.shtml

CSCsk42759

Multiple vulnerabilities exist in the Session Initiation Protocol (SIP) implementation in Cisco IOS that can be exploited remotely to trigger a memory leak or to cause a reload of the Cisco IOS device.

Cisco has released free software updates that address these vulnerabilities. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities addressed in this advisory.

There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself, if administrators do not require the Cisco IOS device to provide voice over IP services.

This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sip.shtml.

CSCsl62609

Multiple vulnerabilities exist in the Session Initiation Protocol (SIP) implementation in Cisco IOS that can be exploited remotely to trigger a memory leak or to cause a reload of the Cisco IOS device.

Cisco has released free software updates that address these vulnerabilities. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities addressed in this advisory.

There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself, if administrators do not require the Cisco IOS device to provide voice over IP services.

This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sip.shtml.

CSCso81854

Multiple Cisco products are vulnerable to DNS cache poisoning attacks due to their use of insufficiently randomized DNS transaction IDs and UDP source ports in the DNS queries that they produce, which may allow an attacker to more easily forge DNS answers that can poison DNS caches.

To exploit this vulnerability an attacker must be able to cause a vulnerable DNS server to perform recursive DNS queries. Therefore, DNS servers that are only authoritative, or servers where recursion is not allowed, are not affected.

Cisco has released free software updates that address these vulnerabilities.

This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080708-dns.shtml.

This security advisory is being published simultaneously with announcements from other affected organizations.

CSCsk42419

Symptom    The Secure Shell server (SSH) implementation in Cisco IOS contains multiple vulnerabilities that allow unauthenticated users the ability to generate a spurious memory access error or, in certain cases, reload the device.

The IOS SSH server is an optional service that is disabled by default, but its use is highly recommended as a security best practice for management of Cisco IOS devices. SSH can be configured as part of the AutoSecure feature in the initial configuration of IOS devices, AutoSecure run after initial configuration, or manually. Devices that are not configured to accept SSH connections are not affected by these vulnerabilities.

Common Vulnerabilities and Exposures (CVE) identifier CVE-2008-1159 has been assigned to this bug.

The Security Advisory for this issue is posted at

http://www.cisco.com/warp/public/707/cisco-sa-20080521-ssh.shtml

CSCsk60020

Symptom    The Secure Shell server (SSH) implementation in Cisco IOS contains multiple vulnerabilities that allow unauthenticated users the ability to generate a spurious memory access error or, in certain cases, reload the device.

The IOS SSH server is an optional service that is disabled by default, but its use is highly recommended as a security best practice for management of Cisco IOS devices. SSH can be configured as part of the AutoSecure feature in the initial configuration of IOS devices, AutoSecure run after initial configuration, or manually. Devices that are not configured to accept SSH connections are not affected by these vulnerabilities.

Common Vulnerabilities and Exposures (CVE) identifier CVE-2008-1159 has been assigned to this bug.
The Security Advisory for this issue is posted at

http://www.cisco.com/warp/public/707/cisco-sa-20080521-ssh.shtml.

CSCsk29999 AIM-IPS-K9:TCP intercept not entering aggressive mode

Symptom    When configuring the AIM-IPS-K9 with tcp intercept, the tcp intercept may not enter aggressive mode. Traffic is not impacted.

Conditions   When the performance level of passing packets to the IPS application is below the window size at which the IPS application enters aggressive mode, it will not enter aggressive mode. On low-end platforms where the router is a constrictor on traffic sent to the card, this problem may be more pronounced.

Workaround   Do not configure tcp intercept with AMI-IPS-K9.

CSCsl61734 CUBE slow start h323 to sip transfer = dead air

Symptom    Slow start H323 to SIP calls may experience no-way audio if the call is transferred after initially connected.

Conditions   This only occurs with slow start H323.

Workaround   Use fast start H323.

CSCsl68798%SYS-2-PAK_SUBBLOCK_SETSIZE traceback at control_plane_init() at boot

Symptom    At boot-time an IOS device may generate tracebacks of the form:

*Mar 1 00:00:10.339:%SYS-2-PAK_SUBBLOCK_SETSIZE: 28 -Process= "Init", ipl= 3, pid= 3,  
-Traceback= 0x601597F4 0x60260E80 0x602C3928 0x6014E588 0x6014E7E4 0x6028B680 0x6028B664

Conditions   This behaviour is observed on an IOS device installed with 12.5(0.5) or later or 12.4(15)XY IOS releases.

Workaround   There is no known workaround.

CSCsl88956 Primary nvram is not properly restored after it is corrupted

Symptom    when the Cisco 28xx and 38xx routers is reloaded, they loose the running configuration and startup configuration.

Conditions   If the last physical sector of nvram which is shared by nvram and licensing subsystem is corrupted, primary nvram is not restored properly.

Workaround   There is no known workaround.

Open Caveats - Cisco IOS Release 12.4(15)XY2

There are no open caveats in this release.

Resolved Caveats - Cisco IOS Release 12.4(15)XY2

CSCsi01875 IPIP gateway rejects a second TCS

Symptom    Placing a video call from a Polycom device. The call gets rejected because Polycom sends a TCS before receiving the TCS ACK.

Conditions   Polycom video endpoints and IP gateway.

Workaround   There is no workaround.

CSCse60897 call-manager-fallback does not allow more than 5 redirects

Symptom    After 5 redirects, calls fail with busy tone when in call-manager-fallback.

Conditions   The maximum redirects seem to be 5 only.

Workaround   There is no workaround.

CSCsk09472 printf_ptr warnings still exist after CSCsj92597

Symptom    The printf_ptr warnings that would appear during a build of the obj-m8500-c1800/c180x-broadband-mz no longer appear.

Workaround   Moving the define for printf_ptr to another file solved the issue.

CSCsl70220 Entity hierarchy issue in 1805 device

Symptom    The root entity is pointing to modem card instead of chassis.

Conditions   It will affect SNMP based management application like CiscoView.

Workaround   There is no workaround.

CSCsl72097 Alignment Error seen in 3800 while making E1/r2 call.

Symptom    While making E1/r2 calls alignment tracebacks were seen. The traceback reported where for alignment corrections.

Conditions   The alignment errors were seen as we were accessing (writing into) non-aligned address.

Workaround   Write using PUTLONG which will do a 4-byte write on un-aligned memory will fix this issue.

CSCsm34933 Refresh Re-Invite disconnect call because CUBE does not send out 200 OK

Symptom    In 12.4(15)XY, when cube receives the session refresh re-invite with sdp then it sends 100 trying but no 200 OK and therefore call gets dropped.

Conditions   Call gets dropped since no 200 OK sent by CUBE

Workaround   There is no workaround.

CSCsm44512 Router crash when unconfigure PVC from ATM interface

Symptom    Router might crash if unconfig the PVC from ATM interface without shutting down the interface first.

Conditions   Crash only observed when interface was up before the PVC removal.

Workaround   Shut down the ATM interface first before the PVC removal.

CSCsm44792 input gain auto-control -9 is added automatically to voice-ports.

Symptom    The command is added automatically to the voice-port configuration: input gain auto-control -9. In addition, this command can not be removed by the "no input gain auto-control -9". This issue causes voice issues to the VTG in the IPICS system.

Conditions   This issue is seen after upgrading router from 12.4(6)T6 or 12.5(15)T1 to 12.(4)15XY.

Workaround   No known workaround.

This is a sample configuration of the voice port: voice-port 0/2/0:0 voice-class permanent 1 auto-cut-through lmr m-lead audio-gate-in lmr e-lead voice input gain auto-control -9 no echo-cancel enable playout-delay nominal 100 playout-delay minimum high no comfort-noise timeouts call-disconnect 3 timeouts teardown lmr infinity timing hookflash-in 0 timing hangover 40 connection trunk 19990929090 description #0/2/0:0#0# INUSE 1221.

Open Caveats - Release 12.4(15)XY1

CSCsl22920 - IOS gw not tunneling ISDN ALERTING message over SIP

Symptom    ISDN QSIG ALERTING message received from Destination PINX is not transparently transported to Originating PINX.

Conditions   This is seen if the Destination PINX sends ISDN QSIG CALL_PROC with PI==1 in response to ISDN QSIG SETUP message.

Workaround   There is no workaround.

Further Problem Description: ISDN QSIG CALL_PROC with PI==1 received from destination PINX is converted to SIP 183 Preogress at TGW and hence treated as ISDN QSIG PROGRESS at OGW/Originating PINX. Due to this 183 corresponding to ISDN QSIG ALERTING from Dest PINX is dropped at OGW.

Resolved Caveats - Release 12.4(15)XY1

There are no resolved caveats in this release.

Open Caveats - Cisco IOS Release 12.4(15)XY

There are no open caveats in this release.

Resolved Caveats - Cisco IOS Release 12.4(15)XY

CSCsj81296 - Multiple RTP tracebacks seen on IPIPGW when transcoding calls

Symptom    Multiple tracebacks are seen on 5400XM operating as an IPIPGW while transcoding calls from G.729r8 to G.711.

Conditions   This issue is seen on 12.4(15)T under normal circumstances even with a single call.

Workaround   There is no workaround

CSCsl41697 - After disconnect, fetching doc more than 20s causes VXML session leak

Symptom    The VXML session is not released, causes memory leakage when loading VXML document and takes more than 20 second after the user is disconnected.

Workaround   There is no workaround.

CSCsj81015 - IPIP Gateway crash ccsip_bridge

Symptom    Cisco Multiservice IP-to-IP Gateway (IPIPGW) crashes during a stress scenario.

Conditions   This symptom occurs in a stress scenario with 100 SIP-H323 calls + 150 SIP-H323 DTMF interworking (rtp-nte to h245-alpha) calls.

Workaround   There is no workaround.

CSCsk60054 Configuration buffer full. Cannot display show run

Symptom    Upon certain configuration changes, the running configuration might not be able to be displayed and the following error message might appear:

% Configuration buffer full, can't add command:!

%Aborting Save. Compress the config, Save it to flash or Free up space on device

Conditions   The issue is seen either using or not using service compress-config on a Cisco IOS Router running CallManager Express (CME) when configuring more than 22 voice user-profiles

Workaround   There is no workaround.

CSCsj66774- No video with CUVA 2.0.2 and 7970 8-3-1S registered to CME 4.1

Symptom    No video is seen on PC's using CVTA with 7970 ip phones registered to a CME 4.1 system.

Conditions   CVTA is being used with a 7970 phone running firmware 8.3.1S

Workaround   Downgrade 7970 firmware to 8.2.2SR1

CSCsk48250 - SW_MGR-3-SM_ERROR: Tracebacks found while establishing l2tpv3 tunnel

Symptom    SW_MGR-3-SM_ERROR: Tracebacks found while establishing l2tpv3 tunnel and the tunnel is not established.

Conditions   This issue is seen in the image 12.4(17.4)T1.

Workaround   There is no workaround.

CSCsk90315 - router crashes while making voice calls with RSVP configuration

CSCsk67885 - Loading sudialog with record utterance fail cause memory leakage

Symptom    When VXML script loading sudialog with record utterance, but record utterance loading fails, the VXML session is not freed. This causes memory leakage.

Conditions   Loading recording utterance failure is an error case. It could be caused by ASR server configuration problem, or IOS configuration problem.

Workaround   There is no workaround.

CSCsk64021 - VXML failing during record - Can not submit a streaming recording

Symptom    A VXML gateway intermittently fails to submit a recording.

Conditions   This symptom is observed in Cisco IOS Release 12.4.

Workaround   There is no workaround.

CSCsk97130 - VXML tree not release when subdialog root document is shared

Symptom    For a VXML application, if the calling document and called document of a subdialog shared the same root document, the tree structure used for the root document will not be released after the call session is finished. This causes memory leakage.

CSCsk53133 - VXML session not freed when disconnect event return from subdialog

Symptom    BVXML session is not freed with the disconnect event returned from subdialog, and the event handler has exit tag. BConditions:BNABWorkaround:BNA

CSCsj97602 - Memory leak on mem_pool:: in Dead pool 

Symptom    A Cisco access server may run out of free processor memory. This symptom can be seen in the <CmdBld>show process memory<noCmdBld> command. Increased memory utilization will be seen in the Dead pool.

Conditions   This symptom has been observed only in access servers that participate in Cisco Customer Voice Portal (CVP). When a VXML application is configured with fetchaudio, the fetchaudio playout fails after user disconnect. The fetchaudio should have been removed from the prompt list, but it was not. This causes the session not to be freed when the application is finished.

Workaround   A reload will temporarily free the leaked memory.

CSCsj34213 Traceback detected @AFW_Leg_Connect

CSCsk48052 - HQF:HQF support for HDLC32 driver for 36/26/37XX in Spidey

CSCsj49237 - Memory leak found at make_fact_attr_list_max

CSCsl03149 - CUBE: SIP-H.323 call - Bad enqeue message and Tracebacks seen

CSCsj27183 - Transcoding: Call fails for H323--SIP Fast start call

Symptom    H323-->SIP interworking fails for a Fast start call when transcoding is enabled on an IPIPGW. Transcoding is done between G711ulaw and G729r8 codecs.

Conditions   This failure is seen for H323--SIP--SIP--SIP and H323--SIP--SIP-- H323 call flows when transcoding is enabled on IPIPGW1. It is also seen on H323--H323--H323--SIP call flow for transcoding on IPIPGW2.This is seen only with a Fast Start call (both with H245 Tunnel enabled and disabled), and the call passes with a slow start call.

Workaround   There is no workaround

CSCsl17037 - CME: Local Directory Issue

Symptom    Directory numbers that are configured in local directory of CME are not being shown in Received Calls directory. The number and name shows while call in Ringing state but is not showing during Connected state.

Conditions   Inbound Call

Workaround   There is no workaround.

CSCsl04115 - CM call to CME when Put on Hold, CME Hears FastBusy instead of TOH

Symptom    Cisco IP Phone placed on hold hears fastbusy instead of tone-on-hold. A Cisco IP Phone registered with a Cisco Unified CallManager Express (CME) may hear a fastbusy tone when placed on hold. This can occur when interworking with Cisco Unified CallManager (CCM) as shown here:

IPPhoneA---CM---H323---CME---IpPhoneB

-  Phone A calls Phone B

-  Phone A puts Phone B on Hold.

-  Instead of playing Tone On Hold, Phone B user hears a fastbusy tone.

Workaround   This behavior was introduced in 12.4(15)T. Either downgrade the IOS version on the CUCME or configure music-on-hold (MOH) to be played from CUCM, instead of TOH

CSCsk83750 Unexpected number of hashed queues invalid after attaching policy

CSCsk80620 - Tracebacks at send_vtsp_setup_request_to_csm

Symptom    Traceback is seen on vtsp_ic_notify.

Conditions   Traceback observed during a modem call

Workaround   There is no workaround.

CSCsk92440 Traceback seen at vtsp_ic_notify in AS5350

Symptom    Traceback is seen on vtsp_ic_notify.

Conditions   Traceback observed even after single e1-r2 call.

Workaround   There is no workaround.

CSCsk96251 H323 calls fails when non-default signaling port is used

Symptom    H323 calls fails when non-default signaling port is used in dialpeer session target.

example: session target ipv4:192.168.1.1:2437

Conditions   Failure is seen only when any specific signaling port is configured.

Workaround   Configure only IP address so that it picks the default signaling port.

example: session target ipv4:192.168.1.1

CSCsi21389 One-way multicast traffic over wireless

Symptom    Routers that have the ability to use the optional 802.11b/g card, such as the Cisco ISR series do not pass multicast traffic across the wireless interface.

Conditions   Cisco routers that have the 802.11 b/g HWIC card do not pass

Conditions   multicast traffic across the wireless interface, though multicast routing is enabled and otherwise is configured normally. Wireless hosts cannot pass multicast traffic between each other, and multicast traffic from the wired network will not be transmitted out the wireless interface.

Workaround   There is no workaround.

CSCsj55923 hwic-fe silently drops input packets > 1000bytes @ >4kpps

Symptom    HWIC-1FE is silently dropping ~2% input packets

Conditions   HWIC-1FE in a CISCO2821 chassis running 12.4(11)XV. The dropped packet are >1000b and >4kpps

Workaround   There is no workaround.

Further Problem Description:

silent drops because the packets are seen by the driver (as per sh controller | i Unicast) and the software level interface (as per sh interface) does not account the same number of input packets and doesn't show any drops nor errors.

CSCsk44535 Tracebacks are seen for H323(SS)---SIP(DM) on IPIPGW2

Symptom    Tracebacks are seen for H323(SS)---SIP(DM) on IPIPGW2

Conditions   Traceback occurred in the following topology: Callgen1----OGW(H323 SS)-----(H323 SS)IPIPGW1(SIP DM)-----(SIP DM)IPIPGW2(H323 SS)---- (H323 SS)TGW----Callgen1

Workaround   There is no workaround.

Further Problem Description:

Tracebacks are seen on IPIPGW2 If Call is made from OGW to TGW. Verified by making a call from TGW to OGW and found similar Tracebacks on IPIPGW1.

CSCsj66265 Assertion failed: at bgp_tcp_read_notify()

Symptom    Router halts with an assertion error.

Conditions   The failure usually occurs while closing connections.

Workaround   There is no workaround.

CSCsj25356 SIP DO_EO: Memory leak in IPIP channels during stress test

CSCsk83813 sip call will pick up the wrong codec type from voice class codec

Symptom    When this problem occurs, the tone remote control functionality does not work and voice becomes distorted due to the codec mismatch.

Conditions   A SIP call consistently uses the incorrect codec type from the "voice class codec" configuration. It should use the value that is configured for "codec preference 1," but instead it uses the value that is configured for the "codec preference 2" setting. This issue occurs when the following configuration is used:

voice class codec 1

      codec preference 1 g729r8

      codec preference 2 g711ulaw

dial-peer voice 9191916 pots

 description #1/1:16#0# INUSE 163

 destination-pattern 19900001429191916

 port 1/1:16

dial-peer voice 555 voip

 rtp payload-type lmr-tone 107

 rtp payload-type nte-tone 108

 voice-class codec 1

 session protocol sipv2

 incoming called-number.

 dtmf-relay rtp-nte

 no vad

Using 2811 

Cisco IOS versions: 12.4(17.4)PI1b and 12.4(17.4)PI1a

Workaround   There is no workaround.

CSCsl12443 CME: TNP phones may experience one way audio

Symptom    IP phone with FXO trunk config may experience intermittent one way audio.

Conditions   Debug ephone detail will show the following error:

OpenReceiveChannelAck status orcError on socket

Workaround   Reboot the phone.

CSCsk93064 Banaras-QSIG: Calls failed

CSCsl04993 uc520 devices does not get reload via SNMP

Symptom    Cisco Unified Communications Series Integrated Services routers are not reloaded through SNMP.

Conditions   Cisco Unified Communications Series Integrated Services routers (ISRs) are not reloaded using SNMP when you restore the device configuration. Cisco Monitor Manager sends a device-reload request to the device after configuration file is restored; however, Cisco Unified Communications 500 Series ISRs do not accept this request through SNMP.

Workaround   To work around this problem, reload the device manually after restoring the configuration file.

CSCsk74181 SIP DO-DO - Basic Fax call fails

Symptom    Fax call fails for a SIP DO-DO call.

Conditions   When the CUBE receives a ReINVITE with fax params, it does not forward the same. Instead it sends a BYE and the call gets disconnected.

Workaround   There is no workaround.

CSCsk66907%SYS-3-CPUHOG: due to Skinny MOH Server process

Symptom    CPU Hog due to Skinny MOH Server causing phones to unregister:

%SYS-3-CPUHOG: Task is running for (xxx)msecs, more than (xxx)msecs

(xxxxxx),process = Skinny MOH Server.

Conditions   Occurs if Music on Hold (MOH) is being streamed from flash in IOS 12.4(11)XW3.

Workaround   Use the live feed option by plugging in a CD player or iPOD or any such device to the MOH port on the UC500. Disable MOH from flash that implies tone on hold (or beep on hold).

CSCsk17498 Per Port Storm-Control is broken

CSCsk52683 System crashed when wireless client is trying to associate with AP

Symptom    System crashes when there are clients trying to associate with AP

Conditions   When AAA authentication fails with mis-configuration in the system or the wireless clients given wrong password to try to associate.

Workaround   Make sure the AAA config is setup correctly and client password is configured correctly.

CSCsk86210 Tracebacks seen while testing After hours callblock feature

Symptom    When making override after-hour call, intermittently gets traceback for buffer overflow.

CSCsk89542 CRAZYHAWK: crazyhawk_tx_start NULL/FAILED msgs with traffic stress

CSCsk82709 CABLE_MODEM_HWIC-3-FAILURE_DETECT: after CM firmware upgrade/reboot

Symptom    After an upgrade of the cable modem firmware, or a reset of the cable modem daughter card, a message could be displayed about failure of cable modem card.

%CABLE_MODEM_HWIC-3-FAILURE_DETECT: The Cable

Modem Daughtercard has failed on interface Cable-Modem0/0/0.

Conditions   This could happen after a cable modem firmware upgrade or reset from IOS. The message is misleading because it is not really a failure of the cable modem card but a reset.

Workaround   There is no workaround.

CSCsk16153 Modem won't be disconnected on exit

Symptom    Modem connection is still active on exit.

Conditions   This is seen after "exiting" from the modem session.

Workaround   There is no workaround.

CSCsk65748 If POE 48V fails to come up, we need to retry 3 times

CSCsk28946 CRAZYHAWK: no ip cef crashes UUT due to corrupted magic value

CSCsk54492 CRAZYHAWK:potential issue working with Detox

CSCsj66492 SPUD: cable-modem QOS not working

Symptom    When a service policy is configured under the cable modem interface and matching traffic passed through it, the policy-map counters do not go up.

Conditions   when a service policy is configured - something like below:

nterface cable-modem 0/0/0

   service-flow primary upstream

       service-policy output

and matching traffic passed, the service policy should take affect for primary service 
flow packets. However, it does not.

Workaround   There is no workaround.

CSCsk41133 TCP Interception not working on HWIC 1GE and NM-1GE interface

Additional References

Use this release note with the documents and websites in this release note and the documents listed in the following sections:

•Release-Specific Documents

•Platform-Specific Documents

Release-Specific Documents

The following documents are specific to Release 12.4 and apply to Release 12.4(15)XY.

•Cross-Platform Release Notes for Cisco IOS Release 12.4)T

•Cisco IOS Software Releases 12.4 Special and Early Deployments

•Caveats for Cisco IOS Release 12.4(15)T

Platform-Specific Documents

Hardware installation guides, configuration and command reference guides, and additional documents specific to the Cisco IAD2430 are at:

http://www.cisco.com/en/US/products/hw/gatecont/ps887/tsd_products_support_series_home.html

Cisco IOS Software Documentation Set

The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents.

Documentation Modules

Each module in the Cisco IOS documentation set consists of one or more configuration guides and one or more corresponding command references. Chapters in a configuration guide describe protocols, configuration tasks, and Cisco IOS software functionality, and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Use each configuration guide with its corresponding command reference. Cisco IOS Software Documentation is available in html or pdf form.

Select your release and click the command references, configuration guides, or any other Cisco IOS documentation you need.

Notices

See the "Notices" section in About Cisco IOS Release Notes located at: http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.

Use this document in conjunction with the documents listed in the "Additional References" section.

CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2008, Cisco Systems, Inc. All rights reserved.