Table Of Contents
Netflow Multicast Support
NetFlow multicast accounting allows you to capture multicast-specific data (both packets and bytes) for multicast flows.
Configuration Information
Configuration information is included in the "Configuring NetFlow Multicast Accounting" chapter of the Cisco IOS NetFlow Configuration Guide, Release 12.4, at the following URL:
http://www.cisco.com/en/US/docs/ios-xml/ios/netflow/configuration/12-4/cfg-nf-multi-acctg.html
The following sections provide information about this feature:
•NetFlow Multicast Benefits
•Multicast Ingress and Multicast Egress Accounting
•NetFlow Multicast Flow Records
•Configuring NetFlow Multicast Accounting in Cisco IOS Release 12.2SXH and Newer Releases
•Configuring NetFlow Multicast Accounting in Cisco IOS Release 12.2SXH and Newer Releases: Example
•Verifying the NetFlow Multicast Accounting Configuration
For a complete list of features included in the "Configuring NetFlow Multicast Accounting" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Release 12.4
The following commands are new or modified for this feature:
•ip multicast netflow egress
•ip multicast netflow ingress
•ip multicast netflow rpf-failure
Detailed information about these commands is included in the Cisco IOS NetFlow Command Reference, Release 12.4, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hnf_r/index.htm
Master Command Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.
Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.
Release 12.4T
Cisco IOS Master Commands List is available at the following URL:
http://www.cisco.com/en/US/docs/ios/mcl/allreleasemcl/all_book.html
Cisco IOS New, Modified, Removed, and Replaced Commands List, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124mindx/124htnml.htm
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.