Table Of Contents
Multicast VPN Extranet VRF Select
Multicast VPN Extranet VRF Select
The Multicast VPN Extranet VRF Select feature provides the capability for Reverse Path Forwarding (RPF) lookups to be performed to the same source address in different VPN routing and forwarding (VRF) instances using the group address as the VRF selector. This feature enhances extranet MVPNs by enabling service providers to distribute content streams coming in from different MVPNs and redistributing them from there.
Configuration Information
Configuration information is included in the "Configuring Multicast VPN Extranet Support" module at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/extvpnsb.htm
The following sections provide information about this feature:
•Overview of Multicast VPN Extranet VRF Select
•Configuring Group-Based VRF Selection Policies with MVPN Extranet Support
•Configuring Group-Based VRF Selection Policies with MVPN Extranet Support: Example
For a complete list of features included in the "Configuring Multicast VPN Extranet Support" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Multicast Command Reference, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbimc_r/index.htm
New or Modified Commands
The following commands are new or modified for this feature:
•ip multicast rpf select
•show ip rpf
•show ip rpf select
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.