Table Of Contents
ISG: Policy Control: RADIUS Proxy Enhancement
ISG: Policy Control: RADIUS Proxy Enhancement
The ISG RADIUS proxy feature enables ISG to serve as a proxy between a client device that uses RADIUS authentication and a AAA server. ISG RADIUS proxy functionality enables ISG to "sniff" (look at) the RADIUS packet flows and, upon successful authentication, transparently create a corresponding ISG session.
Configuration Information
Configuration information is included in the "Configuring ISG as a RADIUS Proxy" module of the Cisco IOS Intelligent Services Gateway Configuration Guide, at the following URL:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html
Command Reference Information
Command reference information is included in the Cisco IOS Intelligent Services Gateway Command Reference, at the following URL:
http://www.cisco.com/en/US/docs/ios/isg/command/reference/isg_book.html
New or Modified Commands
The following commands are new or modified for this feature:
•aaa authorization radius-proxy
•aaa server radius proxy
•accounting method-list
•accounting port
•authentication port
•clear radius-proxy client
•clear radius-proxy session
•client (ISG RADIUS proxy)
•debug radius-proxy
•key (ISG RADIUS proxy)
•message-authenticator ignore
•proxy (RADIUS proxy)
•show radius-proxy client
•show radius-proxy session
•timer (ISG RADIUS proxy)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.