Table Of Contents
QoS: Broadband Aggregation Enhancements—Phase 1: Start Here
QoS: Broadband Aggregation Enhancements—Phase 1: Start Here
First Published: February 28, 2006The QoS: Broadband Aggregation Enhancements—Phase 1 feature enhances the functionality of quality of service (QoS) for broadband access and broadband aggregation.
The QoS: Broadband Aggregation Enhancements—Phase 1 feature consists of the following features related to QoS:
Per-Session QoS allows you to configure QoS features (such as traffic classification, shaping, queuing, and policing) on a per-session basis.
With the RADIUS Accounting for QoS feature, policy map information and traffic class information for the session are now included in the accounting statistics reported.
History for the QoS: Broadband Aggregation Enhancements—Phase 1 Feature
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.
Additional References
The following sections provide references related to QoS: Broadband Aggregation Enhancement—Phase 1.
Related Documents
Related Topic Document TitleQoS commands: complete command syntax, command modes, command history, defaults, usage guidelines, and examples
Cisco IOS Quality of Service Solutions Command Reference
QoS features such as traffic classification, traffic policing, and traffic marking
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.4
Class maps, policy maps, hierarchical policy maps, and Modular Quality of Service (QoS) Command-Line Interface (CLI) (MQC)
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.4
Broadband access
"Broadband Access" section of the Cisco IOS Wide-Area Networking Configuration Guide, Release 12.4
Broadband aggregation for the Cisco 1000 series router
Cisco 10000 Series Broadband Aggregation and Leased-Line Configuration Guide, Release 12.3XI
RADIUS servers and authentication, authorization, and accounting (AAA)
Cisco IOS Security Configuration Guide, Release 12.4
Classification, policing, and marking on Layer 2 Tunneling Protocol (L2TP) Access Concentrator (LAC)
QoS: Classification, Policing, and Marking on LAC feature module, Cisco IOS Release 12.3(8)T
Standards
MIBs
MIB MIBs LinkNone
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:
RFCs
Technical Assistance
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.