System Configuration Settings
There is a number of global system settings that are available under Admin > System Configuration, which you can configure for your Multi-Fabric Orchestrator as described in the following sections.
System Alias and Banner
This section describes how to configure an alias for your Nexus Dashboard Orchestrator as well as enable a custom GUI-wide banner to be displayed at the top of your screen, as shown in the following figure.
-
Log in to your Orchestrator.
-
From the left navigation pane, select Admin > System Configuration.
-
Click the Edit icon to the right of the System Alias & Banners area.
This opens the System Alias & Banners settings window.
-
In the Alias field, specify the system alias.
-
Choose whether you want to enable the GUI banner.
-
If you enable the banner, you must provide the message that will be displayed on it.
-
If you enable the banner, you must choose the severity, or color, for the banner.
-
Click Save to save the changes.
First Published: 2024-03-01
Last Modified: 2024-07-26
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Need help?
- Open a Support Case
- (Requires a Cisco Service Contract)