Objective

This document showcases the procedure to use SPA525G and SPA525G2 as a Bluetooth hands-free for the cell phone connected to it via Bluetooth. The Bluetooth feature of the SPA525G/SPA525G2 can be used to pair a cell phone with it. After pairing if the cell phone has the hands-free profile 1.1/ hands-free profile 2.5 feature then the SPA525G/SPA525G2 can act as a Bluetooth hands-free for the cell phone.

Applicable Devices

- SPA 525G

- SPA 525G2

Enable Bluetooth.

Step 1. Press the Setup button on the phone. The Information and Settings menu appears.

Step 2. Use the navigation keys and scroll down to User Preferences. Press the Select softkey.

Step 3. Use the navigation keys and scroll down to Bluetooth. Press the Select softkey. The Bluetooth Configuration menu appears. Make sure the Bluetooth in enabled.

Step 4. With the Bluetooth Profiles option selected, press the Right Arrow navigation key.

Step 5. Press Scan softkey for scanning the cell phone. The active cell phone will be displayed in the Select a Bluetooth device pair list. Choose the appropriate cell phone and to proceed press the Connect softkey.

Step 5. Final settings are displayed in the Edit Bluetooth Profile list. Press Connect softkey. Check the cell phone.

Step 6. A connection request will pop up on the cell phone asking for the PIN. The default PIN is "0000". Enter PIN and allow the SPA525G/SPA525G2 to get connected with the cell phone. The cell phone after connection will be displayed in the Select Bluetooth Profile list on the SPA525G/SPA525G2.