SG350X: Egress Traffic Shaping on XG Device Uplink Interfaces Limits Traffic to 80 Kbps

Available Languages

Download Options

  • PDF     (3.5 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (48.9 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (67.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5780

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350X: Egress Traffic Shaping on XG Device Uplink Interfaces Limits Traffic to 80 Kbps

Date Identified

May 23, 2017

Date Resolved

March 30, 2018

Products Affected

Model Firmware Version
SG350X 2.2.0.X
 

Problem Description

Egress traffic shaping on XG device uplink interfaces limits traffic to 80 Kbps, even if you configured a lower rate.

Workaround

Use an egress shaping value higher than 80 Kbps.

© 2017 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco