This tool will help you decide if you need to select Native or Hybrid mode for stacking your 10G Cisco Business 350 series switch.
Are you setting up stacking on your Cisco Business switches? It is important to know that all units in the stack must have the same stack unit mode.
After a unit is selected to become the active switch, it can reject its neighbor’s request to join the stack if it has an inconsistent stack unit mode. When a unit is rejected because of its stack unit mode, it is logically shutdown (the ports cannot send/receive traffic) and all its LEDs (system, FAN, unit IDs, network ports, and stack ports LEDs) are turned on.
Some stacking terms may be unfamiliar to you. For further explanation, check out Cisco Business: Glossary of New Terms.
To figure out the mode, select how many switches you want to stack and then the switch models for your stack. It's as simple as that!
I want to stack
switches
Looking for more articles on your CBS350 switch? Check out any of the links below for more information!
Revision | Publish Date | Comments |
---|---|---|
1.0 |
15-Jul-2021 |
Initial Release |