DMZ Host Settings on RV110W

Available Languages

Download Options

  • PDF     (38.8 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (76.5 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (67.4 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 13, 2017
Document ID:SMB2520

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

DMZ Host Settings on RV110W

Objective

A demilitarized zone (DMZ) is a portion of a network that resides behind a firewall yet is still open to the public. A DMZ is useful for email and web servers. Because of the firewall protection, an administrator can restrict access to certain services and ports in the DMZ from both the LAN and WAN. Due to the separation of DMZ from the regular LAN, a compromise in the security of the DMZ does not mean that there is an issue with the security of the LAN. The DMZ should have an IP address within the LAN IP address range, but it should not have an identical IP address to the LAN interface of the RV110W.

This article explains how to configure DMZ Host Settings on the RV110W.

Applicable Devices

  • RV110W

Steps of Procedure

Step 1. Use the web configuration utility to choose Network > LAN > DMZ Host.

Step 2. To the right of DMZ, check the Enable checkbox to activate the DMZ on the network.

Step 3. From the VLAN drop-down menu, choose the ID of the VLAN where the DMZ is enabled.

Note: To edit VLAN IDs, choose Networking > LAN > VLAN Membership from the menu on the left.

Step 4. In the Host IP Address field, enter the IP address of the DMZ host.

Step 5. Click Save to save changes or Cancel to discard them.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco