When the RV34x is behind a Network Address Translation (NAT) device, Layer 2 Tunneling Protocol (L2TP)/Internet Protocol Security (IPsec) fails. This document has been developed to highlight this issue and to define the steps that needs to be followed to resolve it.
All
March 16, 2020
N/A
RV34x Series
When the RV34x router is behind a NAT device, L2TP/IPSec fails. The logs may indicate that the router receives a ‘Delete’ notification from the client during Phase 2 negotiation. IPsec clients like Shrew Soft work fine. This is due to a Microsoft Windows issue. This document defines the workaround to allow NAT on both sides.
This issue has been known and documented. For more details, refer to the article on Connecting L2TP/ IPSec VPN Server Behind a NAT, Error Code 809.
For additional information, check out the article on How to configure an L2TP/IPsec server behind a NAT-T device in Windows Vista and in Windows Server 2008.
If you do not wish to modify the registry, use the following options: