UCS C-Series Server Reboot Troubleshooting TechNote

Available Languages

Download Options

  • PDF     (5.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (75.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (77.1 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:April 21, 2016
Document ID:115024

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document provides output from /var/log/messages (also found in the Onboard Failure Logging (OBFL) log) for a C210-M2 that depicts the expected output during different reboot conditions. When you troubleshoot Cisco Unified Computing System (UCS) C-Series server boot issues, one place to start is the /var/log/messages and OBFL logs. These logs are located in the tech support files. The idea is that you can match the output of a particular tech support message with the output in this document in order to confirm what triggered the reboot.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

  • VMware vSphere 5.0
  • Cisco Integrated Management Controller (CIMC)

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Expected Output for Different Reboot Conditions

Reboot from OS (vSphere 5.0)

5:2012 May 11 13:49:38:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 13:49:38:BMC:kernel:-:<7>[peci_init_hardware]:490:peci: 
       unregistered IRQ: [13]
7:2012 May 11 13:49:38:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:49:38:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0002 files.
5:2012 May 11 13:49:38:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_1.txt
5:2012 May 11 13:49:38:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_4.txt
5:2012 May 11 13:49:38:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 126 : FName = BiosTech_1.txt
5:2012 May 11 13:49:38:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 125 : FName = BiosTech_4.txt
5:2012 May 11 13:49:38:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 0
7:2012 May 11 13:49:38:BMC:kernel:-:<7>[peci_init_hardware]:472:peci:  
       registered IRQ: [13]
5:2012 May 11 13:49:38:BMC:kernel:-:<5>[lpc_reset_handler_Port80_Capture_setup]: 
       630:BIOS_POST_CMPLT De-asserted --> BIOS is running
7:2012 May 11 13:49:38:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:49:38:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0000 files.
6:2012 May 11 13:49:38:BMC:avct_server:-: rvas_wait_for_changes failed
4:2012 May 11 13:49:38:BMC:avct_server:-: No Video Source Detected!
5:2012 May 11 13:49:39:BMC:bioscom:-: lv_mode_dimm_support.c:126: 
       [lpc_reset_seen]LPC Reset Count is Different [0x28:0x29]  
       Asserted LPC Reset Seen
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x4 Cmd:0x28 Resp:0x0
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0x9 0x80
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x4 Cmd:0x28 Resp:0x0
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0xa 0x80
5:2012 May 11 13:49:39:BMC:bioscom:-: lv_mode_dimm_support.c:197: 
       [transition_function]Starting Transition to  
       [High Voltage Mode] from [Unknown Mode]
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x4 Cmd:0x28 Resp:0x0
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0x9 0x80
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x4 Cmd:0x28 Resp:0x0
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0xa 0x80
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x4 Cmd:0x26 Resp:0x0
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1415:audit data&colon;  
       0x9 0x36 0x92 0x92 0x89 0x9f 0x9f 0xa8
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x4 Cmd:0x26 Resp:0x0
5:2012 May 11 13:49:39:BMC:IPMI:585: Bridge.c:1415:audit data&colon;  
       0xa 0x36 0x92 0x92 0x89 0x9f 0x9f 0xa8
5:2012 May 11 13:49:39:BMC:bioscom:-: lv_mode_dimm_support.c:217: 
       [transition_function]Transition to [High Voltage Mode] Success
5:2012 May 11 13:49:39:BMC:IPMI:591: VirtualSEL.c:224:SEL Evt[04 00]<  
       04 00 02 F3 18 AD 4F 20 00 04 25 53 08 00 FF FF >
5:2012 May 11 13:49:39:BMC:BIOSReader:391: BIOSReader.c:227:File Open :  
       BiosTech_3.txt
5:2012 May 11 13:49:39:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2063:block_transfer_fetch_host_request_for_app: BT_OPEN:  
       HostDescriptor = 131 : Filename = BiosTech_3.txt
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[mailbox_isr]:276: 
       Mailbox[0] Bit Change w/NULL Handler (01 - 10)!
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[mailbox_isr]:276: 
       Mailbox[0] Bit Change w/NULL Handler (01 - 20)!
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[mailbox_isr]:276: 
       Mailbox[0] Bit Change w/NULL Handler (01 - 40)!
5:2012 May 11 13:49:39:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[peci_init_hardware]:490:peci:  
       unregistered IRQ: [13]
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0001 files.
5:2012 May 11 13:49:39:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 0
7:2012 May 11 13:49:39:BMC:kernel:-:<7>[peci_init_hardware]:472:peci:  
       registered IRQ: [13]

Notes:
- Only the OS boot does not print the "do_power" output. You can use this fact in order to quickly determine if the server booted to the OS.
- Only the OS boot prints [High Voltage Mode] transitions.

Power Cycle from CIMC User Interface

5:2012 May 11 13:50:22:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x0 Cmd:0x2 Resp:0x0
5:2012 May 11 13:50:22:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0x2
7:2012 May 11 13:50:22:BMC:kernel:-:<7>[do_power_off]:188:do_power_off
5:2012 May 11 13:50:22:BMC:kernel:-:<5>[do_power_off]:190:Power Driver:  
       Power Off Logic @ 181790792
6:2012 May 11 13:50:22:BMC:kernel:-:<6>[press_button]:105:Power Driver:  
       Press Power Button @ 181790793
5:2012 May 11 13:50:22:BMC:AUDIT:-: Server power state modify (op:power-cycle)
5:2012 May 11 13:50:26:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 13:50:26:BMC:kernel:-:<7>[peci_init_hardware]:490:peci:  
       unregistered IRQ: [13]
7:2012 May 11 13:50:26:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:50:26:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0001 files.
7:2012 May 11 13:50:26:BMC:kernel:-:<7>USB FS: VDD Power WAKEUP- Power Good = OFF
7:2012 May 11 13:50:26:BMC:kernel:-:<7>kbd_complete: -108, 0/8
7:2012 May 11 13:50:26:BMC:kernel:-:<7>mouse_complete: -108, 0/6
7:2012 May 11 13:50:26:BMC:kernel:-:<7>USB HS: VDD Power WAKEUP- Power Good = OFF
7:2012 May 11 13:50:26:BMC:kernel:-:<7>bulk_out_complete: -108, 0/31, LUN[0][2]
7:2012 May 11 13:50:26:BMC:kernel:-:<7>handle_exception: Handling  
       MSD_STATE_DISCONNECT for interface[0]
7:2012 May 11 13:50:26:BMC:kernel:-:<7>do_set_interface(): reset_interface
7:2012 May 11 13:50:26:BMC:kernel:-:<7>handle_exception:  
       Handling MSD_STATE_DISCONNECT for interface[1]
5:2012 May 11 13:50:26:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 132 : FName = BiosTech_4.txt
6:2012 May 11 13:50:26:BMC:kernel:-:<6>kbdmouse_write:  
       kbd write aborted for device reset.
6:2012 May 11 13:50:26:BMC:kernel:-:<6>kbdmouse_write:  
       mouse write aborted for device reset.
6:2012 May 11 13:50:26:BMC:avct_server:-: rvas_wait_for_changes failed
5:2012 May 11 13:50:26:BMC:BIOSReader:391: 
     BIOSReader.c:555:File Close : /var/nuova/BIOS/BiosTech_4.txt

Power Off from CIMC User Interface

5:2012 May 11 13:58:57:BMC:IPMI:585: Bridge.c:1388:audit from:kcs  
       Fn:0x0 Cmd:0x2 Resp:0x0
7:2012 May 11 13:58:57:BMC:kernel:-:<7>[do_power_off]:188:do_power_off
5:2012 May 11 13:58:57:BMC:kernel:-:<5>[do_power_off]:190:Power Driver:  
       Power Off Logic @ 182297296
6:2012 May 11 13:58:57:BMC:kernel:-:<6>[press_button]:105:Power Driver:  
       Press Power Button @ 182297296
5:2012 May 11 13:58:57:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0x0
5:2012 May 11 13:58:57:BMC:AUDIT:-: Server power state modify (op:power-off)
5:2012 May 11 13:59:01:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 13:59:01:BMC:kernel:-:<7>[peci_init_hardware]:490:peci:  
       unregistered IRQ: [13]
7:2012 May 11 13:59:01:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:59:01:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0002 files.
7:2012 May 11 13:59:01:BMC:kernel:-:<7>USB FS: VDD Power WAKEUP- Power Good = OFF
7:2012 May 11 13:59:01:BMC:kernel:-:<7>USB HS: VDD Power WAKEUP- Power Good = OFF
7:2012 May 11 13:59:01:BMC:kernel:-:<7>bulk_out_complete: -108, 0/31, LUN[0][2]
7:2012 May 11 13:59:01:BMC:kernel:-:<7>handle_exception: Handling  
       MSD_STATE_DISCONNECT for interface[0]
7:2012 May 11 13:59:01:BMC:kernel:-:<7>do_set_interface(): reset_interface
7:2012 May 11 13:59:01:BMC:kernel:-:<7>handle_exception: Handling  
       MSD_STATE_DISCONNECT for interface[1]
5:2012 May 11 13:59:01:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 143 : FName = BiosTech_3.txt
5:2012 May 11 13:59:01:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 142 : FName = BiosTech_2.txt
6:2012 May 11 13:59:01:BMC:avct_server:-: rvas_wait_for_changes failed
5:2012 May 11 13:59:01:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_3.txt
5:2012 May 11 13:59:01:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_2.txt

Power On from CIMC User Interface

5:2012 May 11 13:59:13:BMC:IPMI:585: Bridge.c:1388:audit from: 
       kcs Fn:0x0 Cmd:0x2 Resp:0x0
5:2012 May 11 13:59:13:BMC:IPMI:585: Bridge.c:1415:audit data&colon; 0x1
7:2012 May 11 13:59:13:BMC:kernel:-:<7>[do_power_on]:226:do_power_on
5:2012 May 11 13:59:13:BMC:kernel:-:<5>[do_power_on]:231:Power Driver:  
       Power On Logic Pulse for 250ms @ 182313079
6:2012 May 11 13:59:13:BMC:kernel:-:<6>[press_button]:105:Power Driver:  
       Press Power Button @ 182313079
5:2012 May 11 13:59:13:BMC:AUDIT:-: Server power state modify (op:power-on)
6:2012 May 11 13:59:13:BMC:kernel:-:<6>[release_button]:115:Power Driver:  
       Release Power Button @ 182313330
7:2012 May 11 13:59:13:BMC:kernel:-:<7>USB FS: VDD Power WAKEUP-  
       Power Good = ON
6:2012 May 11 13:59:13:BMC:kernel:-:<6>se_pilot2_udc_usb_turnon:  
       Passed USB1.1 register test (0)
7:2012 May 11 13:59:13:BMC:kernel:-:<7>USB HS: VDD Power WAKEUP-  
       Power Good = ON
6:2012 May 11 13:59:13:BMC:kernel:-:<6>se_pilot2_udc_usb_turnon:  
       Passed USB2.0 register test (11)
5:2012 May 11 13:59:13:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 0
7:2012 May 11 13:59:13:BMC:kernel:-:<7>[peci_init_hardware]:472:peci:  
       registered IRQ: [13]
5:2012 May 11 13:59:13:BMC:kernel:-:<5>[lpc_reset_handler_Port80_Capture_setup]: 
       630:BIOS_POST_CMPLT De-asserted --> BIOS is running
7:2012 May 11 13:59:13:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:59:13:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0000 files.
5:2012 May 11 13:59:13:BMC:IPMI:587: Pilot2SrvPower.c:394: 
       Blade Power Changed To: [ ON ]
5:2012 May 11 13:59:13:BMC:kernel:-:<5>[do_power_on]: 
       251:Power Driver: Power On Logic Done @ 182313832
5:2012 May 11 13:59:13:BMC:IPMI:590: Pilot2SrvPower.c: 
       188:Pilot2SrvPowerOn
5:2012 May 11 13:59:14:BMC:IPMI:591: VirtualSEL.c:224: 
       SEL Evt[25 00]< 25 00 02 32 1B AD 4F 20 00 04 25 52 08 01 FF FF >
5:2012 May 11 13:59:14:BMC:IPMI:591: VirtualSEL.c:224: 
       SEL Evt[26 00]< 26 00 02 32 1B AD 4F 20 00 04 25 53 08 00 FF FF >
5:2012 May 11 13:59:14:BMC:IPMI:591: VirtualSEL.c:224: 
       SEL Evt[27 00]< 27 00 02 32 1B AD 4F 20 00 04 08 62 0B 00 FF FF >
5:2012 May 11 13:59:14:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2063:block_transfer_fetch_host_request_for_app: BT_OPEN:  
       HostDescriptor = 148 : Filename = BiosTech_1.txt
5:2012 May 11 13:59:14:BMC:BIOSReader:391: BIOSReader.c:227: 
       File Open : BiosTech_1.txt
7:2012 May 11 13:59:14:BMC:kernel:-:<7>[mailbox_isr]:276: 
       Mailbox[0] Bit Change w/NULL Handler (01 - 10)!
7:2012 May 11 13:59:14:BMC:kernel:-:<7>[mailbox_isr]:276: 
       Mailbox[0] Bit Change w/NULL Handler (01 - 20)!
7:2012 May 11 13:59:14:BMC:kernel:-:<7>[mailbox_isr]:276: 
       Mailbox[0] Bit Change w/NULL Handler (01 - 40)!
5:2012 May 11 13:59:14:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 13:59:14:BMC:kernel:-:<7>[peci_init_hardware]:490:peci:  
       unregistered IRQ: [13]
7:2012 May 11 13:59:14:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 13:59:14:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0001 files.
6:2012 May 11 13:59:14:BMC:avct_server:-: Clear RVAS regs
5:2012 May 11 13:59:14:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 0

Power Button on Front of Server (OFF)

6:2012 May 11 14:01:51:BMC:storage:-: SLOT-5:  
       Time established as 05/11/12 14:01:27; (75 seconds since power on)
6:2012 May 11 14:01:51:BMC:avct_server:-:  
       rvas_wait_for_changes failed
5:2012 May 11 14:01:51:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 14:01:51:BMC:kernel:-:<7>[peci_init_hardware]:490:peci:  
       unregistered IRQ: [13]
7:2012 May 11 14:01:51:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 14:01:51:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0002 files.
7:2012 May 11 14:01:51:BMC:kernel:-:<7>USB FS: VDD Power WAKEUP- Power Good = OFF
7:2012 May 11 14:01:51:BMC:kernel:-:<7>USB HS: VDD Power WAKEUP- Power Good = OFF
7:2012 May 11 14:01:51:BMC:kernel:-:<7>bulk_out_complete: -108, 0/31, LUN[0][0]
7:2012 May 11 14:01:51:BMC:kernel:-:<7>handle_exception: Handling  
       MSD_STATE_DISCONNECT for interface[0]
7:2012 May 11 14:01:51:BMC:kernel:-:<7>do_set_interface(): reset_interface
7:2012 May 11 14:01:51:BMC:kernel:-:<7>handle_exception: Handling  
       MSD_STATE_DISCONNECT for interface[1]
5:2012 May 11 14:01:51:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_3.txt
5:2012 May 11 14:01:51:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_2.txt
5:2012 May 11 14:01:51:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 150 : FName = BiosTech_3.txt
5:2012 May 11 14:01:51:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 149 : FName = BiosTech_2.txt
5:2012 May 11 14:01:51:BMC:IPMI:593: Pilot2SrvPower.c:394: 
       Blade Power Changed To: [ OFF ]
5:2012 May 11 14:01:51:BMC:IPMI:591: VirtualSEL.c:224:SEL Evt[33 00]<  
       33 00 02 CF 1B AD 4F 20 00 04 25 52 08 00 FF FF >
6:2012 May 11 14:01:51:BMC:IPMI:583: mcddI2CDrv.c:860:PI2CPerformOP:  
       ioctl to driver failed to read Bus[f4].Dev[5e]!  ErrorStatus[32]
6:2012 May 11 14:01:52:BMC:IPMI:583: mcddI2CDrv.c:860:PI2CPerformOP:  
       ioctl to driver failed to read Bus[f4].Dev[5e]!  ErrorStatus[32]
4:2012 May 11 14:01:52:BMC:avct_server:-: No Video Source Detected!
6:2012 May 11 14:01:52:BMC:avct_server:-: Video Source Detected!
5:2012 May 11 14:01:52:BMC:IPMI:591: VirtualSEL.c:224: 
       SEL Evt[34 00]< 34 00 02 D0 1B AD 4F 20 00 04 25 53 08 01 FF FF >
5:2012 May 11 14:01:52:BMC:bioscom:-: lv_mode_dimm_support.c:126: 
       [lpc_reset_seen]LPC Reset Count is Different [0x30:0x31]  
       Asserted LPC Reset Seen

Power Button on Front of Server (ON)

5:2012 May 11 14:01:58:BMC:IPMI:591: VirtualSEL.c:224: 
       SEL Evt[35 00]< 35 00 02 D6 1B AD 4F 20 00 04 08 62 0B 00 FF FF >
7:2012 May 11 14:01:58:BMC:kernel:-:<7>USB FS: VDD Power WAKEUP-  
       Power Good = ON
6:2012 May 11 14:01:58:BMC:kernel:-:<6>se_pilot2_udc_usb_turnon:  
       Passed USB1.1 register test (0)
7:2012 May 11 14:01:58:BMC:kernel:-:<7>USB HS: VDD Power WAKEUP-  
       Power Good = ON
6:2012 May 11 14:01:58:BMC:kernel:-:<6>se_pilot2_udc_usb_turnon:  
       Passed USB2.0 register test (11)
5:2012 May 11 14:01:58:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 0
7:2012 May 11 14:01:58:BMC:kernel:-:<7>[peci_init_hardware]:472:peci:  
       registered IRQ: [13]
5:2012 May 11 14:01:58:BMC:kernel:-:<5>[lpc_reset_handler_Port80_Capture_setup]: 
       630:BIOS_POST_CMPLT De-asserted --> BIOS is running
7:2012 May 11 14:01:58:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 14:01:58:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0000 files.
5:2012 May 11 14:01:59:BMC:IPMI:587: Pilot2SrvPower.c:394: 
       Blade Power Changed To: [ ON ]
5:2012 May 11 14:01:59:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2063:block_transfer_fetch_host_request_for_app: BT_OPEN:  
       HostDescriptor = 155 : Filename = BiosTech_1.txt
5:2012 May 11 14:01:59:BMC:BIOSReader:391: BIOSReader.c:227:File Open :  
       BiosTech_1.txt
5:2012 May 11 14:01:59:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 1
7:2012 May 11 14:01:59:BMC:kernel:-:<7>[peci_init_hardware]:490:peci:  
       unregistered IRQ: [13]
7:2012 May 11 14:01:59:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 14:01:59:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0001 files.
5:2012 May 11 14:01:59:BMC:kernel:-:<5>[block_transfer_fetch_host_request_for_app]: 
       2125:block_transfer_fetch_host_request_for_app : BT_FILE_CLOSE :  
       HostBTDescr = 155 : FName = BiosTech_1.txt
5:2012 May 11 14:01:59:BMC:BIOSReader:391: BIOSReader.c:555:File Close :  
       /var/nuova/BIOS/BiosTech_1.txt
5:2012 May 11 14:01:59:BMC:kernel:-:<5>LPC Reset ISR -> ResetState: 0
7:2012 May 11 14:01:59:BMC:kernel:-:<7>[peci_init_hardware]:472:peci:  
       registered IRQ: [13]
5:2012 May 11 14:01:59:BMC:kernel:-:<5>[lpc_reset_handler_Port80_Capture_setup]: 
       630:BIOS_POST_CMPLT De-asserted --> BIOS is running
7:2012 May 11 14:01:59:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1141:block_transfer_deallocate_entire_list
7:2012 May 11 14:01:59:BMC:kernel:-:<7>[block_transfer_deallocate_entire_list]: 
       1185:block_transfer_deallocate_entire_list : Dumped: 0x0000 files.
6:2012 May 11 14:01:59:BMC:avct_server:-: Clear RVAS regs
5:2012 May 11 14:01:59:BMC:IPMI:591: VirtualSEL.c:224:SEL Evt[36 00]<  
       36 00 02 D7 1B AD 4F 20 00 04 25 52 08 01 FF FF >
6:2012 May 11 14:02:00:BMC:avct_server:-: Set TSTMUL reg to 0x00100000
5:2012 May 11 14:02:00:BMC:IPMI:591: VirtualSEL.c:224:SEL Evt[37 00]<  
       37 00 02 D8 1B AD 4F 20 00 04 25 53 08 00 FF FF >
6:2012 May 11 14:02:00:BMC:avct_server:-: Detected VGA Text Mode: 80 x 25 chars
6:2012 May 11 14:02:00:BMC:avct_server:-: Current Graphics Core Settings are:
6:2012 May 11 14:02:00:BMC:avct_server:-: 720 x 400, 4 bits per pixel, 640 pitch,  
       in VGA mode
6:2012 May 11 14:02:00:BMC:avct_server:-: Video Signal detected: 720 x 400,  
       color depth is: 4 bits
6:2012 May 11 14:02:00:BMC:avct_server:-: VGA Text mode
6:2012 May 11 14:02:00:BMC:avct_server:-: Change Detected before TFE start
5:2012 May 11 14:02:00:BMC:bioscom:-: lv_mode_dimm_support.c:126: 
       [lpc_reset_seen]LPC Reset Count is Different [0x31:0x32]  
       Asserted LPC Reset Seen
TAC Authored

Contributed by Cisco Engineers

  • Jose Martinez
    Cisco TAC Engineer
  • Andreas Nikas
    Cisco TAC Engineer

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products