MGBT1 MGBLH1 and MGBSX1: MiniGBIC Module Information

Available Languages

Updated:May 29, 2009
Document ID:109766

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Q. What are the different MiniGBIC connection types and their features?

A. MiniGBIC modules, more commonly known as SFP (Small form Factor Pluggable) modules, are hot pluggable media converters.

Model Media Type Max Range (3) Wavelength (nm) Connector
MFEBX1 (1) SMF (2) 20 km Tx 1310 / Rx 1550 LC
MFEFX1 MMF 2 km 850 LC
MFELX1 SMF 10 km 1310 LC
MGBBX1 (1) SMF (2) 20 km Tx 1310 / Rx 1490 LC
MGBLX1 (1) SMF 10 km 1310 LC
MGBLH1 SMF 40 km 1310 LC
MGBSX1 MMF 500 m 850 / LC
MGBT1 Cat 5e UTP 100 m n/a RJ45

(1) Available Q2 2009.

(2) Support simplex fiber only (single strand).

(3) Distances will vary based on fiber plant and operating environment.

Related Information

Revision History

Revision Publish Date Comments
1.0
03-Mar-2009
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products