Field Notice: FN - 70297 - Multiple Processes Can Crash or Fail to Start Due to Recent Microsoft Updates - Software Upgrade Recommended

Available Languages

Updated:December 13, 2018
Document ID:FN70297

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Notice

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Revision History

Revision Publish Date Comments
1.0
13-Dec-18
Initial Release

Products Affected

Affected OS Type Affected Software Product Affected Release Affected Release Number Comments
NON-IOS
ICM User Migration Tool Software
11
11.0(1)

Defect Information

Defect ID Headline
CSCvm04444 Multiple Processes Can Crash or Fail to Start due to Recent Microsoft Updates

Problem Description

Multiple processes that run on a Microsoft Windows 2012 R2 server can crash or fail to start because of KB4338815. The process logs will show a crash with an error similar to "Fail: Error 10048 on Accept and Not Shutdown". Microsoft has confirmed this to be an issue. In order to resolve the issue, install KB4338831 on the affected servers.

Background

This issue can be seen on any component which runs on Windows 2012 R2 and has Microsoft KB4338815 installed on it.

Problem Symptom

Processes which run on Windows 2012 R2 can begin to crash and will create MDMP files. The process logs will show "Error 10048 on Accept and Not Shutdown". This is an error from the Windows Winsock API which indicates that the IP:Protocol:Port combination is already in use even though the netstat -ano | findstr <portnum> command does not show the port in use.

Workaround/Solution

The workaround which Microsoft has provided is to install KB4338831, also known as 7C.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products