Field Notice: FN - 62513 - CRS - ROMMON 1.40 and Above Needs New IOS-XR Software for Diagnostic Support - Apply IOS-XR SMU for Fix

Available Languages

Updated:September 11, 2006
Document ID:FN62513

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.


Revised September 11, 2006

September 7, 2006

NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Products Affected

Comments

 
CRS - 16OC48-POS/DPT?
CRS - 1OC192-POS-IR-UP=?
CRS - 1OC192-POS-IR=?
CRS - 1OC192-POS-LR-UP=?
CRS - 1OC192-POS-LR=?
CRS - 1OC192-POS-SR-UP=?
CRS - 1OC192-POS-SR=?
CRS - 1OC192-POS-VS-UP=?
CRS - 1OC192-POS-VS=?
CRS - 1OC768-ITU/C?
CRS - 1OC768-ITU/C-4PK=?
CRS - 1OC768-ITU/L?
CRS - 1OC768-POS-SR?
CRS - 1OC768-POS-SR-4PK=?
CRS - 4-10GBE?
CRS - 4-10GE-ITU/C?
CRS - 4-10GE-ITU/L?
CRS - 4OC192-ITU/C?
CRS - 4OC192-ITU/L?
CRS - 4OC192-POS-SR-4PK=?
CRS - 4OC192-POS/DPT-IR?
CRS - 4OC192-POS/DPT-LR?
CRS - 4OC192-POS/DPT-SR?
CRS - 4OC192-POS/DPT-VS?
CRS - 4OC192-SPA-4PK=?
CRS - 4OC48-POS?
CRS - 7600-SPA?
CRS - 8-10GBE?
CRS - 8-10GBE-2PACK=?
CRS - 8-10GBE-SR?
CRS - CBL-RPR-OC192-L?
CRS - CBL-RPR-OC192-S?
CRS - CRS-16-ALARM?
CRS - CRS-16-RP?
CRS - CRS-16-RP-B?
CRS - CRS-8-FC/D?
CRS - CRS-8-FC/M?
CRS - CRS-DRP?
CRS - CRS-DRP-CPU?
CRS - CRS-DRP-PLIM?
CRS - CRS-FCC-SC?
CRS - CRS-FCC-SC-22GE?
CRS - CRS-FCC-SC-GE?
CRS - CRS-FCC-SC/GEW?
CRS - CRS-FCC-SFC?
CRS - CRS-FCC-SFC/ED?
CRS - CRS-MSC?
CRS - CRS-MSC-10G?
CRS - CRS-MSC-20G?
CRS - CRS-MSC-40G?
CRS - CRS-MSC-ADP?
CRS - CRS-SIP?
CRS - CRS1-SIP-800?
CRS  ?

Affects all PIDs using ROMMON 1.40 and above

Problem Description

The Field Diagnostic tests will not run correctly when trying to test Fabric cards or Distributed Route Processors (DRPs) installed in a CRS router. The Router must be running ROMMON 1.40 or above for this behavior to be observed.

Note: XR12000-series routers are not affected.

Background

Field Diagnostics were not released on IOS-XR for ROMMON 1.40 and higher, and a new Software Maintenance Update (SMU) is needed in order to enable Diagnostics to work on IOS-XR Releases for CRS-1 Products.

Problem Symptoms

The following error messages may be observed:

RP/0/RP1/CPU0: fabricq_mgr[173]: %DRIVERS -FABRICQ-6-SPI_FBP : Minor error: 
Cluster: 0 in Fabricq ASIC 0 has SPI FBP Link Down error RP/0/RP0/CPU0: fabricq_mgr[173]: 
%DRIVERS -FABRICQ-4-ERR_ASIC_MBE : Fabricq Asic 0 detected multibit error(s). 
Details: FI Link 3 RP/0/RP0/CPU0: fabricq_mgr[173]: %DRIVERS -FABRICQ-6-SPI_FBP : 
Minor error: Cluster: 0 in Fabricq ASIC 0 has SPI FBP Link Down error RP/0/RP0/CPU0: 
fsdb_aserver[183]: %FABRIC-FSDB-1-PLANE_UPDOWN : Plane 0 state changed to DOWN; 
RP/0/RP0/CPU0: shelfmgr[315]: %PLATFORM-SHELFMGR-6-USER_RESET : 
Node 0/SM0/SP is reset due to user reload request

In order to verify which version of ROMMON code is present on the router, issue the following command in 'admin' mode:

(admin)#show diag | inc NODE|PLIM|ROMMON RP/0/RP0/CPU0:CRS-A 

(admin)#sh diag | inc NODE|PLIM|ROMMON NODE 0/0/SP : 
MSC(SP) ROMMON: Version 1.40(20060413:010151) [CRS-1 ROMMON] 
PLIM 0/0/CPU0 : 4OC192-POS/DPT ROMMON: Version 1.40(20060413:002654) [CRS-1 ROMMON] 
NODE 0/2/SP : MSC(SP) ROMMON: Version 1.40(20060413:010151) [CRS-1 ROMMON] 
PLIM 0/2/CPU0 : 8-10GbE ROMMON: Version 1.40(20060413:002654) [CRS-1 ROMMON]

Workaround/Solution

Fix: Contact TAC for the appropriate SMU Number listed below:

Rel 3.3.0: Ask for SMU AA01538

Rel 3.3.1: Ask for SMU AA01537

Rel 3.2.6: Ask for SMU AA01539

Note: For systems running IOS-XR Rel 3.2.x, downgrading to ROMMON 1.38 will enable the diagnostics package to run correctly. This is not advised for systems running IOS-XR Rel 3.3.x.

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS

Description

CSCsf07452 (registered customers only)

Field diagnostic images don't run with ROMMON 1.40 or higher

Revision History

Revision

Date

Comment

1.1

11-SEP-2006

Added DDTS

1.0

07-SEP-2006

Initial Public Release

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco