CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:X/RL:X/RC:X
-
A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE), Cisco TelePresence Codec (TC), and Cisco RoomOS Software could allow an authenticated, remote attacker to escalate privileges to an unrestricted user of the restricted shell.
The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including specific arguments when opening an SSH connection to an affected device. A successful exploit could allow the attacker to gain unrestricted user access to the restricted shell of an affected device.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20191106-telepres-roomos-privesc
-
Vulnerable Products
This vulnerability affects Cisco TelePresence CE Software releases earlier than 9.8.1, Cisco TC Software releases earlier than 7.3.19, and Cisco RoomOS Software releases earlier than RoomOS September Drop 1 2019 that have the SSH feature enabled.
SSH is enabled by default in Cisco TelePresence CE Software, Cisco TC Software, and Cisco RoomOS Software.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
-
There are no workarounds that address this vulnerability.
For environments where SSH is not utilized for device management, SSH can be disabled to mitigate exploitation of this vulnerability. Refer to the Administration Guide for the specific Endpoint for instructions on disabling SSH.
-
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.htmlAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.htmlCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
Cisco fixed this vulnerability in Cisco TelePresence CE Software release 9.8.1 and later and Cisco TC Software release 7.3.19.
Customers can download Cisco TelePresence CE Software and Cisco TC Software from the Software Center by doing the following:
- Click Browse all.
- Choose Collaboration Endpoints and choose the appropriate Endpoint.
- Access releases by using the left pane of the Endpoint page.
Cisco has addressed these vulnerabilities in Cisco RoomOS September Drop 1 2019 Service, which is cloud based. No user action is required. Customers can determine the current remediation status or software version by using the Help function in the service GUI.
Customers who need additional information are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was found by KO of Cisco ASIG during internal security testing.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Version Description Section Status Date 1.0 Initial public release. — Final 2019-November-06
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.