Contents

Introduction

Prerequisites

Requirements

Components Used

Configure

Verify

Troubleshoot

Introduction

This document describes a feature introduced in Cisco Unified Communications Manager (CUCM) Release 10.5 to configure CUCM to open the Cisco TelePresence Management Suite (TMS) User Portal within the Conferencing tab of the Self Care Portal.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

- CUCM Release 10.5

- TMS Booking Portal

Components Used

This document is restricted to CUCM Release 10.5.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Configure

Complete these steps:

1. Obtain the link for the booking URL. The default is:
https://IP_ADDR_OF_TMS/tmsagent/tmsportal/?locale=en_US#1

or

https://FQDN_OF_TMS/tmsagent/tmsportal/?locale=en_US#1

This URL can be custom if performed on the Internet Information Services (IIS) level. Customization of the IIS is not recommended by Cisco.

2. In order to create service for the Video Conference Scheduling Portal, choose User Management > User Settings > UC Service.

3. Configure the parameters for the TMS Schedule URL (Portal URL) as shown in this screenshot.

4. In order to create the service profile, you can select different services as per the requirements. Choose Video Conference Booking from the Primary drop-down list in order to ensure the Video Conference schedule portal appears.

5. After you create the service profile, apply it to all users for which you want this service to appear. This configuration is under System Enterprise Parameters > Self Care Portal Parameters.

Note: If the TMS User Portal does not appear properly in the Self Care Portal, the browser might not support this function. In this case, choose Show as Browser Popup. TMS needs a valid trusted certificate for the Show in Conferencing tab to work.

The configuration results are shown here.

Verify

There is currently no verification procedure available for this configuration.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.