Cisco® 1.25 GHz Surge-Gap Reverse Window Taps are the latest products designed for the DOCSIS® 3.1 evolution of hybrid fiber-coaxial (HFC) networks. They offer all the benefits of our standard surge-gap taps and allow increased efficiency in system design by reducing reverse path tap losses and tilted forward path tap losses.
Reverse window taps provide benefits in the HFC plant at tap locations with high level forward RF signals and significant up-tilt (typically the tap locations closest to nodes and amplifiers). The 1.25 GHz reverse window taps are offered in several forward and reverse tap values (Figure 1).
In the forward path, the tap loss in the reverse window tap is deliberately down-tilted, with greater loss at higher frequencies than at lower frequencies. This allows more frequent use of high-value taps, which increases system design efficiency, and it improves the ability to optimize tap port levels.
In the reverse path, the reverse window taps have lower tap losses than traditional high-value taps. By using Reverse Window taps, the total range of reverse path tap losses in the HFC plant can be narrowed. This improvement allows the range of RF levels transmitted from closed loop customer premises equipment (CPEs) to also be narrowed as well, which can improve the reliability of upstream transmissions. All surge-gap tap products have IEEE-compliant 6kV surge protection. As a result, they offer greatly improved protection against voltage transients in lightning-strike areas and locations with unreliable power networks.
The 1.25 GHz reverse window taps continue to offer the make before break capabilities of previous Cisco tap products, which allow a tap faceplate to be removed without interrupting service to downstream customers.
Features
● Six forward path cable slope values and two reverse path values available in various combinations
● Available in 2-, and 4-way standard Surge-Gap Tap Housings
● Also available in 2-, 4-, and 8-way full profile housings
● AC/RF bypass switch that provides interruption-free service to downstream subscribers during faceplate removal
● 12A through current rating
● AC blocking capacitors on each port to minimize RF signal distortions
● Backwards-compatible housing that supports economical faceplate upgrades
● Increased surge tolerance with rugged design that lets new products continue to operate after surges that would typically damage ordinary products and interrupt service
● Improved return loss to lessen reflected signals for a “cleaner” signal
● AL360T housing with powder coating for superior environmental protection
● Sealed and swaged extended F-ports for greatest resistance to moisture ingress
● Nickel-plated brass F-ports to help ensure a corrosion-resistant drop interface
● Component covers for additional protection of faceplate circuitry during maintenance
● Versatile housing design that permits aerial, pedestal, or multiple dwelling unit (MDU) mounting schemes
Specifications
Tables 1 through 7 provide specifications for Cisco 1.25 GHz Surge-Gap Reverse Window Taps.
Table 1. General Specifications
Item |
Value |
|||
|
Frequency (MHz) |
Specifications |
||
Power passing |
– |
12 Amps |
||
Tap-Tap isolation |
|
2-way |
4-way |
8-way |
5 to 50 |
24 dB |
24 dB |
24 dB |
|
51 to 650 |
24 dB |
24 dB |
22 dB |
|
651 to 870 |
22 dB |
24 dB |
22 dB |
|
871 to 1250 |
22 dB |
22 dB |
22 dB |
|
In-Out return loss |
5 to 1000 |
18dB |
||
1001 to 1250 |
16dB |
|||
Tap port return loss |
5 to 1000 |
18 dB |
||
1001 to 1250 |
16 dB |
|||
Hum modulation @ 10 amps |
5 to 450 |
60 dBc |
||
451 to 750 |
55 dBc |
|||
751 to 1250 |
50 dBc |
|||
EMI shielding (minimum)* |
5 to 15 |
85 dB |
||
16 to 1250 |
100 dB |
Table 2. AC/RF Bypass Switch Performance
|
Units |
Specification |
Notes |
System Open Circuit Time |
ms |
0 ms |
|
Contact Resistance |
mOhms |
10 max |
|
Through Current Capacity |
Amps |
12 |
|
Voltage Capacity |
V AC |
90 |
|
RF Frequency Range |
MHz |
5 to 1250 |
|
Insertion Loss & Return Loss |
|
See Loss Table |
|
Operating Temperature |
°C |
-40 to 60°C |
|
Table 3. AC/RF Bypass Switch Insertion Loss and Return Loss Table
|
Item |
Value |
|||||
AC/RF Bypass |
5 MHz |
500 MHz |
750 MHz |
870 MHz |
1 GHz |
1.25 GHz |
|
Short Circuited Insertion Loss (dB) |
0.02 max <0.01 mean |
0.6 max 0.4 mean |
0.8 max 0.5 mean |
0.7 max 0.4 mean |
0.7 max 0.5 mean |
0.7 max 0.5 mean |
|
Short Circuited Return Loss (dB) |
45 min 50 mean |
16 min 16.5 mean |
16 min 16.5 mean |
18 min 18.5 mean |
21 min 22 mean |
21 min 22 mean |
|
Unless otherwise noted, specifications reflect typical performance and are referenced to 68°F (20°C). Specifications are based on measurements made in accordance with SCTE and ANSI standards (where applicable), using standard frequency assignments.
Table 4. Mechanical Specifications
Standard Tap |
Units |
2-Way and 4-Way |
Notes |
Height |
in. (mm) |
3.6 (91.44) |
|
Width |
in. (mm) |
3.6 (91.44) |
|
Depth |
in. (mm) |
3.0 (76.2) |
|
Full Profile Tap |
Units |
2-Way, 4-Way, and 8-Way |
|
Height |
in. (mm) |
4.25 (107.95) |
|
Width |
in. (mm) |
5.25 (133.35) |
|
Depth |
in. (mm) |
3.0 (76.2) |
|
Surge Resistance:
● Input/Output ports - (combination wave)
● Tap ports (ring wave)
|
kV kV |
6 6 |
|
Standards Compliance |
|||
Mechanical |
ANSI/SCTE 01 1996 - F-port interface specification SCTE IPS-SP-500 - entry port interface specification |
||
Emissions |
FCC - Part 76, Subpart K EN 50083-2/A1: 1998 |
||
Environmental |
ASTM G 53 - weathering specification ASTM B 117 - salt spray specification ASTM D 31 - chip resistance specification EN 60529: 1992 (IP test) Bellcore GR-63-CORE - vibration/transportation ANSI/EEEE C62.41 - lightning |
||
Electrical Safety |
UL Subject 1697 EN 50083-1/A2: 1997 EN 60065: 1998 IEC 60065: 1998 |
Table 5. 2-Way Surge-Gap Reverse Window Tap – Standard Profile or Full Profile Housing
Item |
Frequency (MHz) |
F20/R17 |
F23/R17 |
F23/R20 |
F26/R20 |
F29/R20 |
F32/R20 |
F35/R20 |
|||||||
Insertion Loss |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
|
5 |
1.1 |
0.7 |
1.1 |
0.7 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.4 |
0.8 |
0.5 |
|
40 |
0.8 |
0.5 |
0.8 |
0.5 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.3 |
0.7 |
0.4 |
|
55 |
0.8 |
0.5 |
0.8 |
0.5 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
|
70 |
0.8 |
0.6 |
0.8 |
0.6 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
|
86 |
0.8 |
0.6 |
0.8 |
0.6 |
0.7 |
0.5 |
0.7 |
0.5 |
0.7 |
0.5 |
0.7 |
0.5 |
0.7 |
0.5 |
|
105 |
0.9 |
0.6 |
0.9 |
0.6 |
0.7 |
0.5 |
0.7 |
0.5 |
0.7 |
0.5 |
0.7 |
0.5 |
0.7 |
0.5 |
|
204 |
1.1 |
0.7 |
1.1 |
0.7 |
0.9 |
0.6 |
0.9 |
0.6 |
0.9 |
0.6 |
0.9 |
0.6 |
0.9 |
0.6 |
|
258 |
1.2 |
0.8 |
1.2 |
0.8 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
550 |
1.4 |
1.1 |
1.4 |
1.1 |
1.3 |
0.9 |
1.3 |
0.9 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
|
650 |
1.5 |
1.2 |
1.5 |
1.2 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
|
750 |
1.6 |
1.4 |
1.6 |
1.3 |
1.4 |
1.1 |
1.4 |
1.1 |
1.4 |
1.1 |
1.4 |
1.1 |
1.4 |
1.1 |
|
870 |
1.8 |
1.5 |
1.8 |
1.5 |
1.7 |
1.3 |
1.7 |
1.3 |
1.7 |
1.3 |
1.7 |
1.3 |
1.7 |
1.3 |
|
1000 |
2.0 |
1.7 |
2.0 |
1.7 |
1.9 |
1.4 |
1.9 |
1.5 |
1.9 |
1.5 |
1.9 |
1.5 |
1.9 |
1.5 |
|
1218 |
2.3 |
2.0 |
2.3 |
2.0 |
2.3 |
1.8 |
2.3 |
1.9 |
2.3 |
1.9 |
2.3 |
2.0 |
2.3 |
2.0 |
|
1250 |
2.4 |
2.2 |
2.4 |
2.1 |
2.4 |
1.9 |
2.4 |
2.0 |
2.4 |
2.1 |
2.4 |
2.1 |
2.4 |
2.2 |
|
Tap Port Insertion Loss |
5 |
16.6 |
16.6 |
19.6 |
19.6 |
19.6 |
19.6 |
19.6 |
|||||||
40 |
17.2 |
17.2 |
20.2 |
20.2 |
20.2 |
20.2 |
20.2 |
||||||||
55 |
17.2 |
17.2 |
20.2 |
20.2 |
20.2 |
20.2 |
20.2 |
||||||||
70 |
17.3 |
17.3 |
20.3 |
20.3 |
20.3 |
20.3 |
20.4 |
||||||||
86 |
17.3 |
17.3 |
20.3 |
20.3 |
20.3 |
20.4 |
20.5 |
||||||||
105 |
17.4 |
17.4 |
20.4 |
20.4 |
20.4 |
20.6 |
20.8 |
||||||||
204 |
17.8 |
17.9 |
20.8 |
20.9 |
21.3 |
21.9 |
22.6 |
||||||||
258 |
18.1 |
18.3 |
21.1 |
21.3 |
21.9 |
22.7 |
23.6 |
||||||||
550 |
19 |
20.3 |
22 |
23.3 |
24.9 |
27.2 |
29 |
||||||||
650 |
19.2 |
20.9 |
22.2 |
23.9 |
25.8 |
28.4 |
30.4 |
||||||||
750 |
19.4 |
21.4 |
22.4 |
24.4 |
26.5 |
29.3 |
31.5 |
||||||||
870 |
19.6 |
22 |
22.6 |
25 |
27.4 |
30.3 |
32.7 |
||||||||
1000 |
19.8 |
22.5 |
22.8 |
25.5 |
28.1 |
31.2 |
33.7 |
||||||||
1218 |
19.95 |
22.9 |
22.95 |
25.9 |
28.9 |
31.9 |
34.9 |
||||||||
1250 |
20 |
23 |
23 |
26 |
29 |
32 |
35 |
||||||||
Isolation (Out-Tap) (-dB) Min |
5-50 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
|||||||
51-550 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
551-650 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
651-750 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
751-870 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
870-1000 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
1001-1250 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
Table 6. 4-Way Surge-Gap Reverse Window Tap – Standard Profile or Full Profile Housing
F20/R17 |
F23/R17 |
F23/R20 |
F26/R20 |
F29/R20 |
F32/R20 |
F35/R20 |
|||||||||
|
|
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Max |
TYP |
Insertion Loss (In-Out) (-dB) Max |
5 |
1.4 |
1.0 |
1.4 |
1.0 |
0.8 |
TYP |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
40 |
1.2 |
0.9 |
1.2 |
0.9 |
0.6 |
0.5 |
0.6 |
0.4 |
0.6 |
0.4 |
0.6 |
0.4 |
0.6 |
0.4 |
|
55 |
1.2 |
0.9 |
1.2 |
0.9 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
|
70 |
1.2 |
0.9 |
1.2 |
0.9 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
0.7 |
0.4 |
|
86 |
1.2 |
0.9 |
1.2 |
0.9 |
0.8 |
0.4 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
|
105 |
1.2 |
0.9 |
1.2 |
0.9 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
0.8 |
0.5 |
|
204 |
1.3 |
1.0 |
1.3 |
1.0 |
0.9 |
0.5 |
0.9 |
0.6 |
0.9 |
0.6 |
0.9 |
0.6 |
0.9 |
0.6 |
|
258 |
1.4 |
1.2 |
1.4 |
1.2 |
1.0 |
0.6 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
550 |
1.8 |
1.5 |
1.8 |
1.5 |
1.4 |
0.7 |
1.4 |
1.1 |
1.4 |
1.1 |
1.4 |
1.1 |
1.4 |
1.1 |
|
650 |
1.9 |
1.6 |
1.9 |
1.6 |
1.5 |
1.1 |
1.5 |
1.2 |
1.5 |
1.2 |
1.5 |
1.2 |
1.5 |
1.2 |
|
750 |
2.1 |
1.9 |
2.1 |
1.9 |
1.6 |
1.2 |
1.6 |
1.3 |
1.6 |
1.3 |
1.6 |
1.3 |
1.6 |
1.3 |
|
870 |
2.3 |
2.0 |
2.3 |
2.0 |
1.8 |
1.3 |
1.8 |
1.5 |
1.8 |
1.5 |
1.8 |
1.5 |
1.8 |
1.5 |
|
1000 |
2.5 |
2.3 |
2.5 |
2.3 |
2.1 |
1.5 |
2.1 |
1.9 |
2.1 |
1.9 |
2.1 |
1.9 |
2.1 |
1.9 |
|
1218 |
2.9 |
2.7 |
2.9 |
2.7 |
2.5 |
1.9 |
2.5 |
2.3 |
2.5 |
2.3 |
2.5 |
2.3 |
2.5 |
2.3 |
|
1250 |
3.0 |
2.8 |
3.0 |
2.8 |
2.6 |
2.3 |
2.6 |
2.4 |
2.6 |
2.4 |
2.6 |
2.4 |
2.6 |
2.4 |
|
Tap Port Insertion Loss (+/–1.5 dB) |
5 |
16.6 |
16.6 |
19.6 |
19.6 |
19.6 |
2.4 |
19.6 |
|||||||
40 |
17.2 |
17.2 |
20.2 |
20.2 |
20.2 |
20.2 |
20.2 |
||||||||
55 |
17.2 |
17.2 |
20.2 |
20.2 |
20.2 |
20.2 |
20.2 |
||||||||
70 |
17.3 |
17.3 |
20.3 |
20.3 |
20.3 |
20.3 |
20.4 |
||||||||
86 |
17.3 |
17.3 |
20.3 |
20.3 |
20.3 |
20.4 |
20.5 |
||||||||
105 |
17.4 |
17.4 |
20.4 |
20.4 |
20.4 |
20.6 |
20.8 |
||||||||
204 |
17.8 |
17.9 |
20.8 |
20.9 |
21.3 |
21.9 |
22.6 |
||||||||
258 |
18.1 |
18.3 |
21.1 |
21.3 |
21.9 |
22.7 |
23.6 |
||||||||
550 |
19.0 |
20.1 |
22.0 |
23.3 |
24.8 |
27.2 |
29.0 |
||||||||
650 |
19.2 |
20.6 |
22.2 |
23.9 |
25.5 |
28.4 |
30.3 |
||||||||
750 |
19.4 |
20.9 |
22.4 |
24.4 |
26.2 |
29.3 |
31.3 |
||||||||
870 |
19.6 |
21.5 |
22.6 |
25.0 |
26.9 |
30.0 |
32.2 |
||||||||
1000 |
19.8 |
22.0 |
22.8 |
25.5 |
27.6 |
30.7 |
33.1 |
||||||||
1218 |
20.0 |
22.9 |
23.0 |
25.9 |
28.9 |
32.3 |
35.2 |
||||||||
1250 |
20.0 |
23.2 |
23.0 |
26.0 |
29.2 |
32.6 |
35.6 |
||||||||
Isolation (Out-Tap) |
5-50 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
|||||||
51-550 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
551-650 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
651-750 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
751-870 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
870-1000 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
||||||||
1001-1250 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
Table 7. 8-Way Surge-Gap Reverse Window Tap - Full Profile Housing
Item |
Frequency (MHz) |
F20/R17 |
F23/R17 |
F23/R20 |
F26/R20 |
F29/R20 |
F32/R20 |
F35/R20 |
|||||||
Insertion Loss |
5 |
2.4 |
2.1 |
2.4 |
2.1 |
1.2 |
0.9 |
1.2 |
0.9 |
1.2 |
0.9 |
1.2 |
0.9 |
1.2 |
0.9 |
40 |
1.7 |
1.4 |
1.7 |
1.4 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
55 |
1.7 |
1.4 |
1.7 |
1.4 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
70 |
1.7 |
1.4 |
1.7 |
1.4 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
86 |
1.7 |
1.4 |
1.7 |
1.4 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
105 |
1.7 |
1.4 |
1.7 |
1.4 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
1.0 |
0.7 |
|
204 |
1.8 |
1.5 |
1.8 |
1.5 |
1.2 |
0.9 |
1.2 |
0.9 |
1.2 |
0.9 |
1.2 |
0.9 |
1.2 |
0.9 |
|
258 |
1.9 |
1.6 |
1.9 |
1.6 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
1.3 |
1.0 |
|
550 |
2.6 |
2.3 |
2.6 |
2.3 |
1.8 |
1.5 |
1.8 |
1.5 |
1.8 |
1.5 |
1.8 |
1.5 |
1.8 |
1.5 |
|
650 |
2.7 |
2.4 |
2.7 |
2.4 |
2.0 |
1.7 |
2.0 |
1.7 |
2.0 |
1.7 |
2.0 |
1.7 |
2.0 |
1.7 |
|
750 |
2.9 |
2.6 |
2.9 |
2.6 |
2.1 |
1.8 |
2.1 |
1.8 |
2.1 |
1.8 |
2.1 |
1.8 |
2.1 |
1.8 |
|
870 |
3.3 |
3.0 |
3.3 |
3.0 |
2.4 |
2.1 |
2.4 |
2.1 |
2.4 |
2.1 |
2.4 |
2.1 |
2.4 |
2.1 |
|
1000 |
3.7 |
3.5 |
3.7 |
3.5 |
2.8 |
2.5 |
2.8 |
2.5 |
2.8 |
2.5 |
2.8 |
2.5 |
2.8 |
2.5 |
|
1218 |
4.2 |
4.0 |
4.2 |
4.0 |
3.3 |
3.1 |
3.3 |
3.1 |
3.3 |
3.1 |
3.3 |
3.1 |
3.3 |
3.1 |
|
1250 |
4.3 |
4.1 |
4.3 |
4.1 |
3.4 |
3.2 |
3.4 |
3.2 |
3.4 |
3.2 |
3.4 |
3.2 |
3.4 |
3.2 |
|
Tap Loss (+/–1.5 dB) |
5 |
18.1 |
18.1 |
20.6 |
20.6 |
20.6 |
20.6 |
20.6 |
|||||||
40 |
18.2 |
18.2 |
20.7 |
20.7 |
20.7 |
20.7 |
20.7 |
||||||||
55 |
18.2 |
18.2 |
20.7 |
20.7 |
20.7 |
20.7 |
20.7 |
||||||||
70 |
18.3 |
18.3 |
20.8 |
20.8 |
20.8 |
20.8 |
20.9 |
||||||||
86 |
18.3 |
18.3 |
20.8 |
20.8 |
20.8 |
20.9 |
21 |
||||||||
105 |
18.4 |
18.4 |
20.9 |
20.9 |
20.9 |
21.1 |
21.3 |
||||||||
204 |
18.8 |
18.9 |
21.3 |
21.4 |
21.8 |
22.4 |
23.1 |
||||||||
258 |
19.1 |
19.3 |
21.6 |
21.8 |
22.4 |
23.2 |
24.1 |
||||||||
550 |
20 |
21.3 |
22.5 |
23.8 |
25.4 |
27.7 |
29.5 |
||||||||
650 |
20.2 |
21.9 |
22.7 |
24.4 |
26.3 |
28.9 |
30.9 |
||||||||
750 |
20.4 |
22.4 |
22.9 |
24.9 |
27 |
29.8 |
32 |
||||||||
870 |
20.6 |
23 |
23.1 |
25.5 |
27.9 |
30.8 |
33.2 |
||||||||
1000 |
20.8 |
23.5 |
23.3 |
26 |
28.6 |
31.7 |
34.2 |
||||||||
1218 |
21.15 |
24.1 |
23.45 |
26.4 |
29.4 |
32.4 |
35.7 |
||||||||
1250 |
21.4 |
24.4 |
23.8 |
26.8 |
29.8 |
32.8 |
36.1 |
||||||||
Isolation (Out-Tap) (-dB) Min |
5-50 |
26 |
26 |
30 |
30 |
30 |
30 |
30 |
|||||||
51-1250 |
30 |
30 |
30 |
30 |
30 |
30 |
30 |
Ordering Information
Tables 8 through 10 provide ordering information for Cisco 1.25 GHz Surge-Gap Reverse Window Taps.
Table 8. Surge-Gap Reverse Window Taps Standards PID List
Standard Surge-Gap Reverse Window Taps |
Product Description |
SG-RW-2-F20R17-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F20dB/R17dB (Mult=20) |
SG-RW-2-F23R17-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F23dB/R17dB (Mult=20) |
SG-RW-2-F23R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F23dB/R20dB (Mult=20) |
SG-RW-2-F26R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F26dB/R20dB (Mult=20) |
SG-RW-2-F29R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F29dB/R20dB (Mult=20) |
SG-RW-2-F32R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F32dB/R20dB (Mult=20) |
SG-RW-2-F35R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 2way, F35dB/R20dB (Mult=20) |
SG-RW-4-F20R17-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F20dB/R17dB (Mult=20) |
SG-RW-4-F23R17-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F23dB/R17dB (Mult=20) |
SG-RW-4-F23R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F23dB/R20dB (Mult=20) |
SG-RW-4-F26R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F26dB/R20dB (Mult=20) |
SG-RW-4-F29R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F29dB/R20dB (Mult=20) |
SG-RW-4-F32R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F32dB/R20dB (Mult=20) |
SG-RW-4-F35R20-STD |
Surge-Gap Rev Wndw Tap, 1.25GHz, 4way, F35dB/R20dB (Mult=20) |
Table 9. Surge-Gap Reverse Window Taps Faceplates Standards PID List
Standard Surge-Gap Reverse Window Tap Faceplates |
Product Description |
SG-RW-2-F20R17-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F20dB/R17dB (Mult=20) |
SG-RW-2-F23R17-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F23dB/R17dB (Mult=20) |
SG-RW-2-F23R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F23dB/R20dB (Mult=20) |
SG-RW-2-F26R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F26dB/R20dB (Mult=20) |
SG-RW-2-F29R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F29dB/R20dB (Mult=20) |
SG-RW-2-F32R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F32dB/R20dB (Mult=20) |
SG-RW-2-F35R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 2w, F35dB/R20dB (Mult=20) |
SG-RW-4-F20R17-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F20dB/R17dB (Mult=20) |
SG-RW-4-F23R17-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F23dB/R17dB (Mult=20) |
SG-RW-4-F23R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F23dB/R20dB (Mult=20) |
SG-RW-4-F26R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F26dB/R20dB (Mult=20) |
SG-RW-4-F29R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F29dB/R20dB (Mult=20) |
SG-RW-4-F32R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F32dB/R20dB (Mult=20) |
SG-RW-4-F35R20-SFP |
Surge-Gap Rev Wndw Tap, Faceplate, 1.25G, 4w, F35dB/R20dB (Mult=20) |
Table 10. Surge-Gap Full Profile Reverse Window PID List
Surge-Gap Full Profile Reverse Window Taps |
Product Description |
SG-RW-2-F20R17-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F20dB/R17dB (Mult=10) |
SG-RW-2-F23R17-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F23dB/R17dB (Mult=10) |
SG-RW-2-F23R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F23dB/R20dB (Mult=10) |
SG-RW-2-F26R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F26dB/R20dB (Mult=10) |
SG-RW-2-F29R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F29dB/R20dB (Mult=10) |
SG-RW-2-F32R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F32dB/R20dB (Mult=10) |
SG-RW-2-F35R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 2way, F35dB/R20dB (Mult=10) |
SG-RW-4-F20R17-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F20dB/R17dB (Mult=10) |
SG-RW-4-F23R17-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F23dB/R17dB (Mult=10) |
SG-RW-4-F23R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F23dB/R20dB (Mult=10) |
SG-RW-4-F26R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F26dB/R20dB (Mult=10) |
SG-RW-4-F29R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F29dB/R20dB (Mult=10) |
SG-RW-4-F32R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F32dB/R20dB (Mult=10) |
SG-RW-4-F35R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 4way, F35dB/R20dB (Mult=10) |
SG-RW-8-F20R17-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F20dB/R17dB (Mult=10) |
SG-RW-8-F23R17-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F23dB/R17dB (Mult=10) |
SG-RW-8-F23R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F23dB/R20dB (Mult=10) |
SG-RW-8-F26R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F26dB/R20dB (Mult=10) |
SG-RW-8-F29R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F29dB/R20dB (Mult=10) |
SG-RW-8-F32R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F32dB/R20dB (Mult=10) |
SG-RW-8-F35R20-FP |
Surge-Gap Rev Wndw FP Tap, 1.25GHz, 8way, F35dB/R20dB (Mult=10) |
Table 11. Surge-Gap Full Profile Reverse Window Faceplates PID List
Surge-Gap Full Profile Reverse Window Faceplates |
Product Description |
SG-RW-2-F20R17-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F20dB/R17dB (Mult=10) |
SG-RW-2-F23R17-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F23dB/R17dB (Mult=10) |
SG-RW-2-F23R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F23dB/R20dB (Mult=10) |
SG-RW-2-F26R23-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F26dB/R20dB (Mult=10) |
SG-RW-2-F29R23-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F29dB/R20dB (Mult=10) |
SG-RW-2-F32R23-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F32dB/R20dB (Mult=10) |
SG-RW-2-F35R23-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 2w, F35dB/R20dB (Mult=10) |
SG-RW-4-F20R17-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F20dB/R17dB (Mult=10) |
SG-RW-4-F23R17-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F23dB/R17dB (Mult=10) |
SG-RW-4-F23R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F23dB/R20dB (Mult=10) |
SG-RW-4-F26R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F26dB/R20dB (Mult=10) |
SG-RW-4-F29R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F29dB/R20dB (Mult=10) |
SG-RW-4-F32R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F32dB/R20dB (Mult=10) |
SG-RW-4-F35R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 4w, F35dB/R20dB (Mult=10) |
SG-RW-8-F20R17-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F20dB/R17dB (Mult=10) |
SG-RW-8-F23R17-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F23dB/R17dB (Mult=10) |
SG-RW-8-F23R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F23dB/R20dB (Mult=10) |
SG-RW-8-F26R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F26dB/R20dB (Mult=10) |
SG-RW-8-F29R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F29dB/R20dB (Mult=10) |
SG-RW-8-F32R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F32dB/R20dB (Mult=10) |
SG-RW-8-F35R20-FFP |
Surge-Gap Rev Wndw FP Faceplate, 1.25G, 8w, F35dB/R20dB (Mult=10) |
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
For More Information
For more information go to: http://www.cisco.com/c/en/us/products/video/traditional-size-taps/index.html.