Product Description
Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators with devices based on DOCSIS® need to prepare their networks for the future. They need to plan for reduced service group sizes and ultimately for double or quadruple (or greater) bandwidth speeds. The Cisco® GS7000 1218-MHz 4-Way Segmentable Node enables them to implement these plans. This platform allows independent segmentation and redundancy for both forward and reverse paths in a reliable, easily configurable, technician-friendly package (Figure 1).
The forward path of the GS7000 1218-MHz node launch amplifier has additional gain to drop-into existing 870- and 1000-MHz networks. It can be initially deployed in nonsegmented mode with a single broadcast optical receiver distributing common RF services to either four output ports (all high level) or six output ports (two high level and four lower level). The forward path can also be fully segmented by using four independent optical receivers, with each feeding its own output port, or it can be left and right segmented by using two independent optical receivers, with each feeding half the node’s output ports. Forward-path optical redundancy is also supported through the use of optional redundant optical receivers. The type of forward-path segmentation or redundancy is determined by the type of Cisco GS7000 forward configuration module installed.
The GS7000 node’s reverse path is equally flexible. Reverse traffic can be segmented or combined and routed to a maximum of four distributed feedback (DFB) or coarse wavelength-division multiplexing (CWDM) reverse optical transmitters, or to the Cisco GS7000 Enhanced Digital Reverse (EDR) Transmitters as part of the EDR system. Reverse-path optical redundancy is supported through the use of optional redundant optical transmitters. The type of reverse-path segmentation or redundancy is determined by the type of GS7000 reverse configuration module installed.
All optical transmitters and optical receivers used in the GS7000 platform have new high-profile module covers that include both a self-contained fiber pigtail connector storage area and an integrated pull ring for easier module installation and removal. Additionally, the GS7000 optical receiver has a new low-current design that dissipates less power and incorporates a two-state interstage RF attenuator switch for performance optimization.
Features
● Six-port 1.2-GHz RF platform
● Gallium nitride (GaN) gain stages
● Easy forward and reverse RF split changes
● Field-accessible plug-in forward interstage linear equalizers, forward and reverse configuration modules, and signal directors
● 1218-MHz accessories in the Cisco GainMaker® style
● Onboard three-state reverse switch (on, off, and 6 dB) allows each reverse input to be isolated for noise and ingress troubleshooting (status monitoring or local control module required)
● Positions for up to four optical receivers and four optical transmitters in housing lid
● Optional low-cost local control module that can be installed with a redundant forward configuration module to allow optical path redundancy when no status monitor is required
● Optional status monitoring using a DOCSIS transponder (using standard SCTE-HMS MIBs)
● Fiber entry ports on both ends of housing lid
● Fiber management tray and track for easy access to fiber connections
● Primary and redundant power supplies with passive load sharing
● Spring-loaded seizure assemblies to allow coaxial connectors to be installed or removed without removing amplifier chassis
● Dual or split AC power
Node Block Diagrams
Figures 2, 3, and 4 provide block diagrams of different node configurations.
Configuration Module Block Diagrams
Figures 5 and 6 provide block diagrams for forward and reverse configuration modules.
Optical Section Specifications
Table 1 provides specifications for the optical section of the forward receiver module. Figures 7 through 10 show output levels and optical modulation index (OMI) values at different settings. Tables 2 and 3 summarize station performance characteristics.
Table 1. Specifications for Optical Section of Forward Receiver Module
Optical Section: Forward Receiver Module |
Unit |
GS7000 Standard Receiver |
GS7000 Low-Input Receiver |
Notes |
Wavelength |
nm |
1260 to 1620 nm |
1260 to 1620 nm |
|
Optical input range |
● mW
● dBm
|
● 0.25 to 1.6
● -6 to +2
|
● 0.1 to 0.63
● -10 to -2
|
1 |
RF pass band |
MHz |
54 to 1218 |
54 to 1218 |
|
Frequency response |
dB |
± 0.5 |
± 0.5 |
2 |
Tilt |
dB |
0 to +1 |
0 to +1 |
|
Optical input test point (±10%) |
VDC |
1 V per mW |
1 V per mW |
3 |
Redundant optical receive transponder switching threshold default (±1.0 dB) |
dBm |
-10 |
-10 |
|
Receiver RF output level at -2 dBm (or -6 dBm) optical input power |
dBmV |
Refer to Figures 7 and 8 |
Refer to Figures 9 and 10 |
4 |
Receiver RF output test point (±1.0 dB) |
dB |
-20 |
-20 |
|
Table 2. RF Section General Station Performance
General Station Performance 5-42/54 Split |
Unit |
Forward |
Reverse |
Notes |
Pass band |
MHz |
54 to 1218 |
5 to 42 |
|
Input and output port return loss |
dB |
16 |
16 |
|
Hum modulation at 12A |
dB |
70 (54 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 70 (25 to 42 MHz) |
|
Hum modulation at 15A |
dB |
65 (54 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 65 (25 to 42 MHz) |
|
Test points (±1.0 dB) |
dB |
-20 |
-20 |
|
General Station Performance 5-65/86 Split |
Unit |
Forward |
Reverse |
Notes |
Pass band |
MHz |
86 to 1218 |
5 to 65 |
|
Input and output port return loss |
dB |
16 |
15.75 |
|
Hum modulation at 12A |
dB |
70 (86 to 870 MHz) 60 (801 to 1218 MHz) |
60 (5 to 25 MHz) 70 (25 to 65 MHz) |
|
Hum modulation at 15A |
dB |
65 (86 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 65 (25 to 65 MHz) |
|
Test points (±1.0 dB) |
dB |
-20 |
-20 |
|
General Station Performance 5-85/102 Split |
Unit |
Forward |
Reverse |
Notes |
Pass band |
MHz |
105 to 1218 |
5 to 85 |
|
Input and output port return loss |
dB |
16 |
16 |
|
Hum modulation at 12A |
dB |
70 (105 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 70 (25 to 85 MHz) |
|
Hum modulation at 15A |
dB |
65 (105 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 65 (25 to 85 MHz) |
|
Test points (±1.0 dB) |
dB |
-20 |
-20 |
|
General Station Performance 5-204/258 Split |
Unit |
Forward |
Reverse |
Notes |
Pass band |
MHz |
258 to 1218 |
5 to 204 |
|
Input and output port return loss |
dB |
16 |
16 |
|
Hum modulation at 12A |
dB |
70 (258 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 70 (25 to 204 MHz) |
|
Hum modulation at 15A |
dB |
65 (258 to 870 MHz) 60 (870 to 1218 MHz) |
60 (5 to 25 MHz) 65 (25 to 204 MHz) |
|
Test points (±1.0 dB) |
dB |
-20 |
-20 |
|
Table 3. Forward and Reverse Station Performance
Forward Station Performance All Splits |
Unit |
|
Notes |
Amplifier type |
- |
GaN |
|
Operational gain (minimum) |
dB |
42 |
1 |
Frequency response … 54 to 1002 MHz 54 to 1218 MHz |
dB dB |
±0.50 ±0.75 |
1 |
Internal tilt (±1 dB) |
dB |
18 |
1, 2 |
Port-to-port isolation with full segmentation |
dB |
70 (54 to 750 MHz) 60 (750 to 1002 MHz) 50 (1002 to 1218 MHz) |
1 |
Port-to-port isolation with left and right segmentation |
dB |
70 (54 to 750 MHz) 60 (751 to 1002 MHz) 50 (1003 to 1218 MHz) |
1 |
Noise at: 54 MHz 1218 MHz |
dB |
14.0 13.0 |
1 |
Reference output levels at 1218 MHz (analog equivalent): 1002 MHz 870 MHz 750 MHz 650 MHz 550 MHz 258 MHz 105 MHz 86 MHz 54 MHz |
dBmV |
56 52.5 50.5 48.7 47 45.5 41 39 38.5 38 |
|
Reference output tilt (54 to 1218 MHz) (86 to 1218 MHz) (105 to 1218 MHz) (258 to 1218 MHz) |
dB |
18 17.5 17 15 |
2, 3 |
Forward Station Performance 5-42/54 Split |
Unit |
|
Notes |
78 NTSC Channels (CW) with Digital |
|
|
6 |
Composite triple beat |
dB |
72 |
4 |
Composite second order (high side) |
dB |
66 |
4 |
CIN |
dB |
56 |
4 |
All Quadrature Amplitude Modulation (QAM) |
|
|
6 |
CIN |
dB |
50 |
|
Reverse Station Performance (All Splits) |
Unit |
Reverse |
Notes |
Amplifier type |
- |
GaAs FET |
|
Operational gain (minimum) |
dB |
0 |
5 |
Frequency response |
dB |
±0.5 |
5 |
Internal tilt (+/-1 dB) |
dB |
0 |
5 |
Path-to-path isolation |
dB |
70 (5 to 85 MHz) 60 (85 to 204 MHz) |
5 |
Noise |
dB |
7.5 (5 to 85 MHz) 7.7 (85 to 204 MHz) |
5 |
Notes:
1. Forward performance is for the station from the output of the optical receiver to the node RF output port, with 0 dB pad in the optical interface board (OIB), any forward configuration module, 0.5 dB interstage (I/S) pad, 18 dB linear I/S equalization factory-selected output pad, and signal director jumper. This specification includes OIB losses.
2. The reference output tilt and internal tilt are both linear tilt.
3. The forward reference output tilt specified is achieved through field installation of appropriate linear I/S equalization, in conjunction with the internal tilt of the launch amplifier and the tilt associated with the optical link (transmitter and receiver combination).
4. The stated distortion performance is for the launch amplifier section operated at reference output levels and tilts. Full station performance can be determined by combining the optic performance and the launch amplifier performance.
5. Reverse performance is for the station from the reverse input port to the input of the reverse optical transmitter module, with 0 dB reverse input pad.
6. Load with the specified NTSC CW carries from 55 to 550 MHz. “Digital” refers to 550- to 1218-MHz load with QAM carriers at -6 dB relative to analog video carrier levels.
Other Specifications
Tables 4 through 7 list other specifications for the GS7000 node.
Table 4. Station Delay Characteristics
Station Delay Characteristics 42/54 Split |
|||
Forward |
Reverse |
||
Frequency (MHz) |
Delay (ns) |
Frequency (MHz) |
Delay (ns) |
55.25 to 58.83 |
18 |
5.0 to 6.5 |
36 |
61.25 to 64.83 |
15 |
6.5 to 8.0 |
15 |
67.25 to 70.83 |
8 |
8.0 to 9.5 |
12 |
|
|
37.5 to 39.0 |
12 |
|
|
39.0 to 40.5 |
18 |
|
|
40.5 to 42.0 |
20 |
Station Delay Characteristics 65/86 Split |
|||
Forward |
Reverse |
||
Frequency (MHz) |
Delay (ns) |
Frequency (MHz) |
Delay (ns) |
88.0 to 92.43 |
18 |
5.0 to 6.5 |
36 |
112.0 to 116.43 |
5 |
6.5 to 8.0 |
15 |
120.0 to 124.43 |
5 |
8.0 to 9.5 |
8 |
|
|
60.5 to 62.0 |
8 |
|
|
62.0 to 63.5 |
8 |
|
|
63.5 to 65.0 |
12 |
Station Delay Characteristics 85/102 Split |
|||
Forward |
Reverse |
||
Frequency (MHz) |
Delay (ns) |
Frequency (MHz) |
Delay (ns) |
109.28 to 112.86 |
18 |
5.0 to 6.5 |
36 |
115.28 to 118.86 |
10 |
6.5 to 8.0 |
15 |
121.28 to 124.86 |
8 |
8.0 to 9.5 |
8 |
|
|
80.5 to 82.0 |
8 |
|
|
82.0 to 83.5 |
12 |
|
|
83.5 to 85.0 |
18 |
Station Delay Characteristics 204/258 Split |
|||
Forward |
Reverse |
||
Frequency (MHz) |
Delay (ns) |
Frequency (MHz) |
Delay (ns) |
259.26 to 262.84 |
10 |
5.0 to 6.5 |
36 |
265.26 to 268.84 |
8 |
6.5 to 8.0 |
15 |
271.26 to 274.84 |
8 |
8.0 to 9.5 |
10 |
|
|
199.5 to 201.0 |
5 |
|
|
201.0 to 202.5 |
5 |
|
|
202.5 to 204 |
10 |
Table 5. Electrical Data
Electrical |
Units |
|
Notes |
|||
Maximum AC through current (continuous) |
Amps |
15 |
|
|||
Maximum AC through current (surge) |
Amps |
25 |
|
|||
Component DC Power Consumption (Typical) |
|
At +24.5 VDC |
At +8.5 VDC |
At +5.5 VDC |
At -6 VDC |
|
Launch amplifier configured with 1x4 forward configuration module (with reverse amplifier) |
Amps |
3.10 |
0.28 |
- |
- |
|
Launch amplifier configured with 4x4 forward configuration module (with reverse amplifier) |
Amps |
3.10 |
0.56 |
- |
- |
|
1.2 GHz optical receiver (standard and low input) |
Amps |
0.16 |
- |
- |
- |
|
Reverse transmitter: dense wavelength-division multiplexing (DWDM) |
Amps |
0.22 |
- |
- |
0.10 |
|
Reverse transmitter: 1310 and CWDM |
Amps |
0.11 |
- |
- |
0.09 |
|
Status monitoring DOCSIS transponder |
Amps |
0.17 |
- |
0.02 |
- |
|
Local control module (LCM) |
Amps |
- |
- |
0.07 |
- |
|
1:1 EDR Transmitter (CWDM and DWDM) |
Amps |
0.11 |
- |
- |
- |
|
2:1 EDR Transmitter (CWDM and DWDM) |
Amps |
0.26 |
- |
- |
- |
|
Power supply DC current rating |
Amps |
6.2 |
1.0 |
1.3 |
0.8 |
|
Table 6. Station Powering Data
Station Powering Data |
||||||||||||
GS7000 Node |
I DC (Amps at 24 VDC) |
|
AC Voltage |
|||||||||
90 |
85 |
80 |
75 |
70 |
65 |
60 |
55 |
50 |
45 |
|||
With 1 forward receiver, 1x4 forward configuration module, 1 reverse transmitter, and 4x1 reverse configuration module |
3.54 |
AC current (A) |
1.5 |
1.6 |
1.5 |
1.5 |
1.6 |
1.7 |
1.8 |
2.0 |
2.2 |
2.4 |
Power (W) |
103.0 |
102.7 |
102.4 |
102.2 |
102.3 |
102.0 |
102.0 |
102.1 |
102.2 |
102.8 |
||
With 4 forward receivers, 4x4 forward configuration module, 4 reverse transmitters, and 4x4 reverse configuration module |
4.35 |
AC current (A) |
1.8 |
1.8 |
1.8 |
1.9 |
2.0 |
2.1 |
2.3 |
2.4 |
2.8 |
3.0 |
Power (W) |
129.5 |
129.2 |
129.0 |
128.8 |
128.6 |
128.8 |
128.7 |
128.9 |
129.5 |
130.0 |
Table 7. Environmental and Mechanical Specifications
Environmental |
Units |
|
Operating temperature range |
Degrees |
-40 to 140°F (-40 to 60°C) |
Relative humidity range |
Percent |
5 to 95% |
Mechanical |
||
Housing Dimensions |
Weight |
|
L x H x D: 21.3 x 11.6 x 11.1 in. |
Station with 4 receivers, 4 transmitters, 2 power supplies: 50.0 lb. |
Ordering Information
The GS7000 node is available in a variety of configurations, shown in Table 8. You can also select other components during the ordering process (Tables 9 through 15). Please consult with your account representative, customer service representative, or system engineer to determine the best configuration for your particular application.
Table 8. Cisco GS7000 1.2-GHz Node Configurations
Cisco GS7000 1.2-GHz Node Configurations |
Part Number for Ordering |
42/54 MHz Split |
|
GS7K 1.2GHz, 4254, 1PS, SIRx, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS411S11XXXXXXX |
GS7K 1.2GHz, 4254, 1PS, LIRX, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS411L11XXXXXXX |
GS7K 1.2GHz, 4254, 1PS, SIRx, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS411S13XXXXXXX |
GS7K 1.2GHz, 4254, 1PS, LIRX, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS411L13XXXXXXX |
65/86 MHz Split |
|
GS7K 1.2GHz, 65/86, 1PS, SIRx, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS611S11XXXXXXX |
GS7K 1.2GHz, 65/86, 1PS, LIRX, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS611L11XXXXXXX |
GS7K 1.2GHz, 65/86, 1PS, SIRx, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS611S13XXXXXXX |
GS7K 1.2GHz, 65/86, 1PS, LIRX, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS611L13XXXXXXX |
85/102 MHz Split |
|
GS7K 1.2GHz, 85/102, 1PS, SIRx, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS811S11XXXXXXX |
GS7K 1.2GHz, 85/102, 1PS, LIRX, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS811L11XXXXXXX |
GS7K 1.2GHz, 85/102, 1PS, SIRx, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS811S13XXXXXXX |
GS7K 1.2GHz, 85/102, 1PS, LIRX, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS811L13XXXXXXX |
204/258 MHz Split |
|
GS7K 1.2GHz, 204/258, 1PS, SIRx, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS211S11XXXXXXX |
GS7K 1.2GHz, 204/258, 1PS, LIRX, 1x4FCM, 4x1RCM, TPA, STDFBRTRY |
GS7KS211L11XXXXXXX |
GS7K 1.2GHz, 204/258, 1PS, SIRx, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS211S13XXXXXXX |
GS7K 1.2GHz, 204/258, 1PS, LIRX, 1X4FCM, 4x2RCM-2:1EDR, TPA, STDFBRTRY |
GS7KS211L13XXXXXXX |
Table 9. Cisco GS7000 1.2-GHz Node Accessories
Required Accessories |
|
Note: Configured Nodes ship with 0 dB reverse input pads but no pads on the OIB. All other standard accessories are shipped from the factory. Four forward launch amplifier attenuator pads, 15 dB linear equalizers, and two signal director jumpers are shipped with every configured node. Plug-in Pads (attenuators): Available in 1.0 dB Steps from 0 to 20 dB
● 1 required for each Optical Receiver Module installed in the node (for Optical Interface Board)
● 1 required for each Optical Transmitter Module installed in the node (for Optical Interface Board)
● 1 required for each Reverse input path activated unless the shipped 0 dB value is adequate. (for Launch Amplifier)
|
|
Optional Accessories |
|
Plug-in Forward Linear Equalizers: Available in 1.5 dB Steps from 0 to 24 dB
● Node shipped with 18 dB Linear Equalizers (4)
* installed for 18 dB of tilt to 1218 MHz (
*GM-EQL-1.2G-18)
|
|
Plug-in Signal Directors: 2 Required
● Node shipped with Jumpers installed to activate 4 RF output ports
● Optional 2-Way Splitters are required to activate 5 or 6 RF output ports
|
|
Plug-in Pads (Attenuators): |
Part Number for Ordering |
GainMaker Plug-in Pad 1.2 GHz, 0dB (Multi=10) |
GM-PAD-1.2G-00= |
GainMaker Plug-in Pad 1.2 GHz, 1dB (Multi=10) |
GM-PAD-1.2G-1.0= |
GainMaker Plug-in Pad 1.2 GHz, 2dB (Multi=10) |
GM-PAD-1.2G-2.0= |
GainMaker Plug-in Pad 1.2 GHz, 3dB (Multi=10) |
GM-PAD-1.2G-3.0= |
GainMaker Plug-in Pad 1.2 GHz, 4dB (Multi=10) |
GM-PAD-1.2G-4.0= |
GainMaker Plug-in Pad 1.2 GHz, 5dB (Multi=10) |
GM-PAD-1.2G-5.0= |
GainMaker Plug-in Pad 1.2 GHz, 6dB (Multi=10) |
GM-PAD-1.2G-6.0= |
GainMaker Plug-in Pad 1.2 GHz, 7dB (Multi=10) |
GM-PAD-1.2G-7.0= |
GainMaker Plug-in Pad 1.2 GHz, 8dB (Multi=10) |
GM-PAD-1.2G-8.0= |
GainMaker Plug-in Pad 1.2 GHz, 9dB (Multi=10) |
GM-PAD-1.2G-9.0= |
GainMaker Plug-in Pad 1.2 GHz, 10dB (Multi=10) |
GM-PAD-1.2G-10.0= |
GainMaker Plug-in Pad 1.2 GHz, 11dB (Multi=10) |
GM-PAD-1.2G-11.0= |
GainMaker Plug-in Pad 1.2 GHz, 12dB (Multi=10) |
GM-PAD-1.2G-12.0= |
GainMaker Plug-in Pad 1.2 GHz, 13dB (Multi=10) |
GM-PAD-1.2G-13.0= |
GainMaker Plug-in Pad 1.2 GHz, 14dB (Multi=10) |
GM-PAD-1.2G-14.0= |
GainMaker Plug-in Pad 1.2 GHz, 15dB (Multi=10) |
GM-PAD-1.2G-15.0= |
GainMaker Plug-in Pad 1.2 GHz, 16dB (Multi=10) |
GM-PAD-1.2G-16.0= |
GainMaker Plug-in Pad 1.2 GHz, 17dB (Multi=10) |
GM-PAD-1.2G-17.0= |
GainMaker Plug-in Pad 1.2 GHz, 18dB (Multi=10) |
GM-PAD-1.2G-18.0= |
GainMaker Plug-in Pad 1.2 GHz, 19dB (Multi=10) |
GM-PAD-1.2G-19.0= |
GainMaker Plug-in Pad 1.2 GHz, 20dB (Multi=10) |
GM-PAD-1.2G-20.0= |
GainMaker Plug-in Pad 1.2 GHz 75ohm Terminator (Multi=10) |
GM-PAD-1.2G-75= |
Table 10. Cisco GS7000 Forward Components
Cisco GS7000 Forward Components |
Part Number for Ordering |
GS7K Launch Amp 1.2 GHz 42/54 MHz |
GS7K-LA-1.2G-4254= |
GS7K Launch Amp 1.2 GHz 65/86 MHz |
GS7K-LA-1.2G-6586= |
GS7K Launch Amp 1.2 GHz 85/102 MHz |
GS7K-LA-1.2G-8502= |
GS7K Launch Amp 1.2 GHz 204/258 MHz |
GS7K-LA-1.2G-0458= |
GS7K 1.2 GHz FWD Config Mod, 1x4 1.2 GHz |
GS7K-FCM-1.2G-14= |
GS7K 1.2 GHz FWD Config Mod, 1x4 Redundant 1.2 GHz |
GS7K-FCM-1.2G-14R= |
GS7K 1.2 GHz FWD Config Mod, 1x4 FWD Inject/Redun 1.2 GHz |
GS7K-FCM-1.2G-14I= |
GS7K 1.2 GHz FWD Config Mod, 2x4 1.2 GHz |
GS7K-FCM-1.2G-24= |
GS7K 1.2 GHz FWD Config Mod, 2x4 Redundant 1.2 GHz |
GS7K-FCM-1.2G-24R= |
GS7K 1.2 GHz FWD Config Mod, 3x4, RX 1, 3, 4 1.2 GHz |
GS7K-FCM-1.2G-34B= |
GS7K 1.2 GHz FWD Config Mod, 3x4, RX 1, 2, 4 1.2 GHz |
GS7K-FCM-1.2G-34A= |
GS7K 1.2 GHz FWD Config Mod, 4x4 1.2 GHz |
GS7K-FCM-1.2G-44= |
GS7000 1.2 GHz Signal Director Jumper (Multi=10) |
GS7K-SD-1.2G-JMP= |
GS7000 1.2 GHz Signal Director Splitter (Multi=10) |
GS7K-SD-1.2G-SPLT= |
GS7000 1.2 GHz Directional Coupler 8dB 2/6 (Multi=10) |
GS7K-1.2G-DC8-26= |
Unless otherwise noted, specifications reflect typical performance and are referenced to 68°F (20°C). Specifications are based on measurements made in accordance with SCTE/ANSI standards (where applicable), using standard frequency assignments.
|
|
GS7000 1.2 GHz Directional Coupler 8 dB 3/5 (Multi=10) |
GS7K-1.2G-DC8-35= |
GS7000 1.2 GHz Directional Coupler 12dB 2/6 (Multi=10) |
GS7K-1.2G-DC12-26= |
GS7000 1.2 GHz Directional Coupler 12 dB 3/5 (Multi=10) |
GS7K-1.2G-DC12-35= |
Forward Local Injection Module Kit |
4013575 |
GainMaker 1.2 GHz Forward Equalizer, 0dB (Multi=10) |
GM-EQC-1.2G-0= |
GainMaker 1.2 GHz Forward Linear Equalizer, 1.5dB (Multi=10) |
GM-EQL-1.2G-1.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 3dB (Multi=10) |
GM-EQL-1.2G-3= |
GainMaker 1.2 GHz Forward Linear Equalizer, 4.5dB (Multi=10) |
GM-EQL-1.2G-4.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 6dB (Multi=10) |
GM-EQL-1.2G-6= |
GainMaker 1.2 GHz Forward Linear Equalizer, 7.5dB (Multi=10) |
GM-EQL-1.2G-7.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 9dB (Multi=10) |
GM-EQL-1.2G-9= |
GainMaker 1.2 GHz Forward Linear Equalizer, 10.5dB (Multi=10) |
GM-EQL-1.2G-10.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 12dB (Multi=10) |
GM-EQL-1.2G-12= |
GainMaker 1.2 GHz Forward Linear Equalizer, 13.5dB (Multi=10) |
GM-EQL-1.2G-13.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 15dB (Multi=10) |
GM-EQL-1.2G-15= |
GainMaker 1.2 GHz Forward Linear Equalizer, 16.5dB (Multi=10) |
GM-EQL-1.2G-16.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 18dB (Multi=10) |
GM-EQL-1.2G-18= |
GainMaker 1.2 GHz Forward Linear Equalizer, 19.5dB (Multi=10) |
GM-EQL-1.2G-19.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 21dB (Multi=10) |
GM-EQL-1.2G-21= |
GainMaker 1.2 GHz Forward Linear Equalizer, 22.5dB (Multi=10) |
GM-EQL-1.2G-22.5= |
GainMaker 1.2 GHz Forward Linear Equalizer, 24dB (Multi=10) |
GM-EQL-1.2G-24= |
GS7000 1.2 GHz Standard Input Optical Receiver, SCA |
GS7K-1.2G-STDRX= |
GS7000 1.2 GHz Low Input Optical Receiver, SCA |
GS7K-1.2G-LIRX= |
Table 11. Cisco GS7000 Reverse Configuration Modules
Cisco GS7000 Reverse Configuration Modules |
Part Number for Ordering |
GS7K 1.2 GHz Reverse Config Mod, 4x1 |
GS7K-RCM-1.2G-41= |
GS7K 1.2 GHz Reverse Config Mod, 4x1, Redundant |
GS7K-RCM-1.2G-41R= |
GS7K 1.2 GHz Reverse Config Mod, 4x2, TX 1, 2 |
GS7K-RCM-1.2G-42A= |
GS7K 1.2 GHz Reverse Config Mod, 4x2, TX 1, 3 |
GS7K-RCM-1.2G-42B= |
GS7K 1.2 GHz Reverse Config Mod, 4x2, Redundant |
GS7K-RCM-1.2G-42R= |
GS7K 1.2 GHz Reverse Config Mod, 4x3, TX 1, 3, 4 |
GS7K-RCM-1.2G-43B= |
GS7K 1.2 GHz Reverse Config Mod, 4x3, TX 1, 2, 4 |
GS7K-RCM-1.2G-43A= |
GS7K 1.2 GHz Reverse Config Mod, 4x4 |
GS7K-RCM-1.2G-44= |
GS7000 Node High Gain Analog DFB Tx 1310 SCA |
4011952 |
Table 12. Cisco GS700 CWDM Reverse Optical Transmitters
Cisco GS7000 CWDM Reverse Optical Transmitters |
Part Number for Ordering |
GS7000 Node High Gain Analog CWDM Tx 1470 SCA |
4011955 |
GS7000 Node High Gain Analog CWDM Tx 1490 SCA |
4011956 |
GS7000 Node High Gain Analog CWDM Tx 1510 SCA |
4011957 |
GS7000 Node High Gain Analog CWDM Tx 1530 SCA |
4011961 |
GS7000 Node High Gain Analog CWDM Tx 1550 SCA |
4011965 |
GS7000 Node High Gain Analog CWDM Tx 1570 SCA |
4011966 |
GS7000 Node High Gain Analog CWDM Tx 1590 SCA |
4011967 |
GS7000 Node High Gain Analog CWDM Tx 1610 SCA |
4011968 |
Table 13. Cisco GS7000 EDR CWDM Transmitter and Optical Pluggable Modules (OPMs)
Digital 1:1 EDR CWDM Transmitter and OPMs |
Part Number for Ordering |
EDR GS1185 Tx module |
4042873 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1270nm |
4042868.1270 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1290nm |
4042868.1290 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1310nm |
4042868.1310 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1330nm |
4042868.1330 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1350nm |
4042868.1350 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1370nm |
4042868.1370 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1390nm |
4042868.1390 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1410nm |
4042868.1410 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1430nm |
4042868.1430 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1450nm |
4042868.1450 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1470nm |
4042868.1470 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1490nm |
4042868.1490 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1510nm |
4042868.1510 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1530nm |
4042868.1530 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1550nm |
4042868.1270 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1570nm |
4042868.1290 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1590nm |
4042868.1310 |
EDR Optical Pluggable Module for 1:1 Tx CWDM-1610nm |
4042868.1330 |
Digital 2:1 EDR CWDM Transmitter and OPMs |
Part Number for Ordering |
EDR GS2185 Tx module |
4042877 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1270nm |
4042871.1270 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1290nm |
4042871.1290 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1310nm |
4042871.1310 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1330nm |
4042871.1330 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1350nm |
4042871.1350 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1370nm |
4042871.1370 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1390nm |
4042871.1390 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1410nm |
4042871.1410 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1430nm |
4042871.1430 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1450nm |
4042871.1450 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1470nm |
4042871.1470 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1490nm |
4042871.1490 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1510nm |
4042871.1510 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1530nm |
4042871.1530 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1550nm |
4042871.1550 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1570nm |
4042871.1570 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1590nm |
4042871.1590 |
EDR Optical Pluggable Module for 2:1 Tx CWDM-1610nm |
4042871.1610 |
Table 14. Cisco GS7000 EDR DWDM Transmitter and Optical Pluggable Modules (OPM)
Digital 1:1 EDR DWDM Transmitter and OPMs |
Part Number for Ordering |
EDR GS1185 Tx module |
4042873 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH17 |
4042869.17 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH18 |
4042869.18 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH19 |
4042869.19 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH20 |
4042869.20 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH21 |
4042869.21 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH22 |
4042869.22 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH23 |
4042869.23 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH24 |
4042869.24 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH25 |
4042869.25 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH26 |
4042869.26 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH27 |
4042869.27 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH28 |
4042869.28 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH29 |
4042869.29 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH30 |
4042869.30 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH31 |
4042869.31 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH32 |
4042869.32 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH33 |
4042869.33 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH34 |
4042869.34 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH35 |
4042869.35 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH36 |
4042869.36 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH37 |
4042869.37 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH38 |
4042869.38 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH39 |
4042869.39 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH40 |
4042869.40 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH41 |
4042869.41 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH42 |
4042869.42 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH43 |
4042869.43 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH44 |
4042869.44 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH45 |
4042869.45 |
Unless otherwise noted, specifications reflect typical performance and are referenced to 68°F (20°C). Specifications are based on measurements made in accordance with SCTE/ANSI standards (where applicable), using standard frequency assignments
|
|
|
|
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH46 |
4042869.46 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH47 |
4042869.47 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH48 |
4042869.48 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH49 |
4042869.49 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH50 |
4042869.50 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH51 |
4042869.51 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH52 |
4042869.52 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH53 |
4042869.53 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH54 |
4042869.54 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH55 |
4042869.55 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH56 |
4042869.56 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH57 |
4042869.57 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH58 |
4042869.58 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH59 |
4042869.59 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH60 |
4042869.60 |
EDR Optical Pluggable Module for 1:1 Tx DWDM-CH61 |
4042869.61 |
Digital 2:1 EDR DWDM Transmitter and OPMs |
Part Number for Ordering |
EDR GS2185 Tx module |
4042877 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH17 |
4042872.17 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH18 |
4042872.18 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH19 |
4042872.19 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH20 |
4042872.20 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH21 |
4042872.21 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH22 |
4042872.22 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH23 |
4042872.23 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH24 |
4042872.24 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH25 |
4042872.25 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH26 |
4042872.26 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH27 |
4042872.27 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH28 |
4042872.28 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH29 |
4042872.29 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH30 |
4042872.30 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH31 |
4042872.31 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH32 |
4042872.32 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH33 |
4042872.33 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH34 |
4042872.34 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH35 |
4042872.35 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH36 |
4042872.36 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH37 |
4042872.37 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH38 |
4042872.38 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH39 |
4042872.39 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH40 |
4042872.40 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH41 |
4042872.41 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH42 |
4042872.42 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH43 |
4042872.43 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH44 |
4042872.44 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH45 |
4042872.45 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH46 |
4042872.46 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH47 |
4042872.47 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH48 |
4042872.48 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH49 |
4042872.49 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH50 |
4042872.50 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH51 |
4042872.51 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH52 |
4042872.52 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH53 |
4042872.53 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH54 |
4042872.54 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH55 |
4042872.55 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH56 |
4042872.56 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH57 |
4042872.57 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH58 |
4042872.58 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH59 |
4042872.59 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH60 |
4042872.60 |
EDR Optical Pluggable Module for 2:1 Tx DWDM-CH61 |
4042872.61 |
Table 15. Cisco GS7000 Additional Components
Cisco GS7000 Additional Components |
Part Number for Ordering |
GS7K 1.2 GHz Housing with OIB and Standard Fiber Tray |
GS7K-HSG-1.2G= |
GS7K 1.2 GHz LID with OIB and Standard Fiber Tray |
GS7K-LID-1.2G= |
GS7K 1.2 GHz OIB |
GS7K-1.2G-OIB= |
Brackets for passives used in Expanded Fiber Tray |
4027000 |
Expanded Fiber Tray, without brackets, SCA |
4057377 |
SC APC bulkheads (PKG of 10) |
4027740 |
GS7000 1.2 GHz Power Supply |
GS7K-PS-1.2G= |
Local Control Module (LCM) |
4027113 |
Local Control Module (LCM) EDR |
GS7K-LCM-EDR= |
Status Monitoring Module - DOCSIS |
GS7K-DOC-TRAN-1.2= |
Test Point Cable Kit, (includes the 6 cables required to enable GS7000 housing external test points) |
GS7K-TSTCABLE-HP= |
Test Point Cable Kit-Long Reach |
562580 |
GS7000 Forward Cable Kit (Kit of 5 Cables) |
4019114 |
GS7000 Reverse Cable Kit (Kit of 5 Cables) |
4019115 |
GS7K 1.2 GHz Split Kit 85/102 MHz (QTY=10) |
GS7K-SKT-1.2G-85= |
GS7K 1.2 GHz Split Kit 204/258 MHz (QTY=10) |
GS7K-SKT-1.2G-204= |
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.