Cisco Catalyst Micro Switches Data Sheet

Data Sheet

Available Languages

Download Options

  • PDF
    (527.6 KB)
    View with Adobe Reader on a variety of devices
Updated:September 22, 2024

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (527.6 KB)
    View with Adobe Reader on a variety of devices
Updated:September 22, 2024
 

 

The Cisco® Catalyst® Micro Switches are Cisco’s purpose-built product family for FTTx deployments, allowing customers to eliminate IDF, save precious real estate, conserve energy, and cut cabling costs.

Product overview

Fiber to the desk, office, etc. (FTTx) is not a new concept. In this deployment scenario, the improved range of fiber optics over copper cables allows access switches to be deployed right next to the end devices, with uplinks connected directly to the main distribution frame, eliminating the need for an intermediate distribution frame on each floor. However, as access switches get closer to the end users, the requirements for operating noise and product footprint get stricter. Enter the Cisco Catalyst Micro Switches, a product family of small, fanless switches purpose-built for FTTx deployments. These switches offer flexible mounting options and open up a variety of network design and connectivity opportunities.

Cisco Catalyst Micro Switch Series Switches

Figure 1.            

Cisco Catalyst Micro Switch Series Switches

Highlights

      Four Gigabit Ethernet ports and two Gigabit Ethernet copper or fiber uplinks, with line-rate forwarding performance

      Power over Ethernet Plus (PoE+) support, with up to 60W PoE power budget in wall-jack switches, and up to 120W for desktop versions

      Fanless design for silent operation and enhanced reliability

      Enhanced Limited Lifetime Warranty (E-LLW)

Features and benefits

Table 1 lists many of the features and benefits of the Cisco Catalyst Micro Switches.

Table 1.        Features and benefits

Feature

Benefits

Switch reliability and scale

Small form factor, fanless design, silent operation

Delivers up to 30W of power per port, ideal for deployment in indoor open workspaces and other areas that require quiet operations.

Perpetual and Fast PoE

Perpetual PoE ensures uninterrupted powering of endpoints during switch upgrades, reboots, and configuration changes. Fast PoE ensures powering of PoE endpoints within 5 seconds of power restoration, in case of power losses.

System life

These switches come with the industry’s highest level of reliability and 10 years of system life.

Prevalidated architecture

Cisco supports tested, validated, and integrated solutions, which can reduce deployment risk and speed up the time to value. Proven robust technology, with existing network and end-to-end security, provide a complete digital building solution.

Installation simplicity

Flexible mounting options

Supports flexible deployment and mounting options, including wall mount, C-rail duct mount, desktop, and bottom mount, based on the SKU.

Flexible powering options

The switch can be powered through an AC/DC adapter with IEC plugs for 100-240VAC inputs.

The desktop version has an uplink Powered Device (PD) port that, when connected with an external power supply, will power up the unit.

Single Pane of Management – Management/Automation Options

Configuration at scale

The switches are Cisco DNA ready and can be used as part of the Cisco Digital network Architecture (Cisco DNAC) solution for automated switch deployments.

Automation via Cisco PnP

They also support Cisco Network Plug and Play (PnP), a secure, scalable solution that accelerates network device deployments by automating the installation and configuration of Cisco IOS® Software, enhancing productivity and user experience and reducing costs and downtime.

Network management

Cisco Prime® Infrastructure provides comprehensive network lifecycle management with an extensive library of features that automate initial and day-to-day management. Cisco Prime integrates hardware and software platform expertise and operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, and administrative tools.

Cisco SDA Extended Node

SDA Extended Node provides Cisco DNA Center Automation and Assurance for Cisco Micro switches. It also extends Fabric Benefits to end points connected to the switches, allowing consistent segmentation and policy-based access.

SDA Extended Node requires Cisco DNA-A license on the Micro switches, and a Fabric-Edge Capable switch at the upstream.

Software and security

Layer 2 features for operational simplicity

IPv6 host support.

Simple Network Management Protocol (SNMP) v3 for secure configuration, control, and information retrieval through appropriate MIBs.

Link Aggregation Control Protocol (LACP) for creating Ethernet channeling with devices that conform to IEEE 802.3ad.

Dynamic Host Configuration Protocol (DHCP) auto-configuration of multiple switches through a boot server.

Cisco VLAN Trunking Protocol (VTP), which supports dynamic VLANs and dynamic trunk configuration across all switches.

Embedded Remote Monitoring (RMON) software agent for enhanced traffic management, monitoring, and analysis; four RMON groups (history, statistics, alarms, and events) are supported.

Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED) enhancements for easy identification of end devices.

Constrained Application Protocol (CoAP) support

The switches functions as a CoAP Proxy. CoAP is a lightweight protocol enabling sensors, HVAC, and security systems to interoperate for delivering advanced space analytics.

Security and threat defense

802.1X, MACAuth, TACACS+, and RADIUS authentication capabilities for secure onboarding of end devices.

Secure Boot to make sure that only signed and authorized images can load on the switch.

Port-based access control lists (ACLs) to let the switch automatically allow or block packets based on policies for source and destination IP addresses. Rules can be set up differently on a port-by-port basis.

Private VLAN (PVLAN) edge protected port feature for restricting communication between end devices.

Device Security: Role-based security to enable network segmentation and prevent unauthorized use; helping prevent overall attack surface and contain attacks thanks to device profiling with Cisco Identity Services Engine (ISE).

Power management

Switch hibernate and deep sleep mode

Switch sleep management can be initiated through Cisco EnergyWise®, as was traditionally done, or through CoAP. CoAP support in the Catalyst Micro Switches enables a sleep trigger. This support is provided for initiating sleep with the Real-Time Clock (RTC) configuration. The system can wake up based on a wake-on-clock and mode button.

IEEE 802.3az or Energy Efficient Ethernet (EEE)

Ports dynamically sense idle periods between traffic bursts and quickly switch the interfaces into a low-power idle mode, reducing power consumption.

System power efficiency

The switches also improve the industry standard on system power efficiency. During the sleep condition, the system is reducing its power use by 65%, improving its energy efficiency.

Cisco Energy Manager

Integrated with the Cisco Energy Management suite for full energy control and visibility.

Power supply

Certified AC/DC adapter.

Product details

Switch models

The Cisco Catalyst Micro Switches are available in three models. Two of the models take power from a recommended AC/DC adapter and guarantee two PoE+ or four PoE ports. The third model can take power from the AC/DC adapter and uplink PD port and load four PoE+ ports along with two USB-C ports.

Table 2 compares the available switch models and lists the software package that ships by default with each model and how much PoE power is available for the downlink ports.

Table 2.        Switch models and default software

Model

Access ports and uplinks

PoE, USB-C

Power source

Default software

CMICR-4PS

4x 1G,

2x 1G SFP

4x PoE+

DC

LAN Lite

CMICR-4PC

4 x 1G,

1x 1G copper, 1x 1G SFP

4x PoE+

DC

LAN Lite

CMICR-4PT

4x 1G,

1x 1G copper, 1x combo

4x PoE+,

2x USB-C

DC, 803.2.bt,

Cisco UPOE+®, PoE+

LAN Lite

Switch software

Cisco Catalyst Micro Switches ship with the LAN Lite version of Cisco IOS Software, which is optimized for Layer 2 deployments. For more information on the features supported in LAN Lite, refer to the Cisco feature navigator at
https://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.

Licensing and software policy

Customers with Cisco Catalyst LAN Lite software feature sets will receive updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards as long as the original end user continues to own or use the product or for up to one year from the end-of-sale date for this product, whichever occurs earlier. This policy supersedes any previous warranty or software statement and is subject to change without notice.

Cisco DNA licensing

Table 3.        Cisco DNA Essentials, Advantage, and Premier package features

Feature

Cisco DNA Essentials

Cisco DNA Advantage

Basic Automation

Cisco Network Plug and Play application, LAN Automation

Element management

Discovery, inventory, topology, software image, licensing, and configuration management

Basic Assurance

Health dashboards: Network, Client, and Application

Basic switch and wired client health monitoring

Advanced Automation

SD-Access*

Product specifications

Table 4 provides hardware specifications for the Cisco Catalyst Micro Switches.

Table 4.        Hardware specifications

Description

Specification

Performance

Forwarding bandwidth

6 Gbps

Switching bandwidth (full-duplex capacity)

12 Gbps

Flash memory

256 MB

Memory DRAM

512 MB

Max VLANs

64

VLAN IDs

1-4094

Maximum Transmission Unit (MTU)

Up to 1500 bytes

MAC entries

8192

Port channels

4

Queues

4 egress queues per port

Buffers

1000

ACLs

180 MAC, IPv4 and IPv6

Bootup time

30 seconds

Forwarding rate, 64-byte packet Cisco Catalyst Micro Switches

CMICR-4PS

8.928 mpps

CMICR-4PC

8.928 mpps

CMICR-4PT

8.928 mpps

Connectors and cabling

Interfaces:

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

1000BASE-FX port: SFP connector, optical cable

Power connector

A specific power connector for the switch itself to be used with the recommended AC/DC adapter.

Indicators

Per-Port status: Link integrity, disabled, activity, speed, PoE status

SystEM status: System, power-saving mode

Dimensions
(H x W x D)

Model

Inches

Centimeters

CMICR-4PS

1.79 X 3.54 X 3.10

4.55 X 9.0 X 7.88

CMICR-4PC

1.79 X 3.54 X 3.10

4.55 X 9.0 X 7.88

CMICR-4PT

1.77 X 6.00 X 5.29

4.5 X 15.24 X 13.45

Weight

Model

Pounds

Kilograms

CMICR-4PS

1.32277

0.60

CMICR-4PC

1.32277

0.60

CMICR-4PT

2.0724

0.940

Environmental ranges

Operating*temperature up to 5000 ft (1524 m)

-5°C to +35°C**

+23F to +95F

Operating* temperature up to 10,000 ft (3048 m)

-5°C to +30°C

+23F to +86F

Storage temperature up to 15,000 ft (4572 m)

-25°C to +70°C

-13F to +158F

Operating altitude

Up to 3048 m

Up to 10,000 ft

Storage altitude

Up to 4000 m

Up to 15,000 ft

Operating relative humidity

5% to 95% noncondensing

Storage relative humidity

5% to 95% noncondensing

* Minimum ambient temperature for cold start is 0°C (+32°F).

** Operation above 40°C may impact service life.

Tables 5 and 6 describe the power specifications for the Cisco Catalyst Micro Switches adapter input supply.

Table 5.        Power adapter specifications

Parameter

Minimum

Nominal

Maximum

Voltage range

85VAC

100/12 /240 VAC

264VAC

Line frequency

47 Hz

50/60 Hz

63 Hz

Table 6.        Adapter output rating

Parameters

Rating

Output

53V

Voltage (VDC) at 0.7A load

53.5V

Set tolerance (% and VDC)

±1% (52.965 ~ 54.035)

Min. current (A)

0

Max. current (A)

1.5

Total error and

±2%

Table 7 and 8 shows power adapter types and available passthrough power

Table 7.        Power Adapter Types and Available PoE power for CMICR-4PS and -4PC Models

Model

Available POE Power

Description

PSU-80W-AC

62W

80W Power Adapter (Original PWR-ADPT SKU)

PSU-L-80W-ADPT

62W

80W Power Adapter (53V/ 1.5A)

PSU-L-74W-ADPT

62W

74W Power Adapter (53V/ 1.39A)

65W AC to DC Adapter

50W

65W Adapter with a specification of 53V/1.22A

Table 8.        Available Passthrough power for CMICR-4PT Model

Input Power Source#1 Adapter Power (W)

Input Power Source#2 Uplink PD Power (W)

Outgoing Power

Only for PoE Passthrough

Only for USB TYPE C Power Delivery

When Shared for Both PoE & USB Type C

80

NA

62

55

55

NA

PoE+ 30

No

No

No

NA

UPOE 60

29

23

23

NA

BT 90

46

39

39

80

PoE+ 30

62

55

55

80

UPOE 60

99

90

90

80

BT 90

120

90

90

Table 9.        Available Passthrough power for CMICR-4PS and CMICR-4PC

Wall Jack Models (CMICR-4PS and CMICR-4PC)

Adapter

Model

Input Power (W)

Available PoE Power (W)

Cisco 80W Adapter

PSU 80W (AC)
PSU-L-80W-ADPT

80

62

Cisco 74W Adapter

PSU-L-74W-ADPT

74

62

Third Party Support

65W AC to DC Adapter

65

50

Table 10.     Management and standards support

Description

Specification

SNMP MIBs supported

  BRIDGE-MIB
  CISCO-BRIDGE-EXT-MIB
  CISCO-CDP-MIB
  CISCO-CONFIG-COPY-MIB
  CISCO-ENVMON-MIB
  CISCO-ERR-DISABLE-MIB
  CISCO-FLASH-MIB
  CISCO-IF-EXTENSION-MIB
  CISCO-IGMP-FILTER-MIB
  CISCO-LAG-MIB
  CISCO-MEMORY-POOL-MIB
  CISCO-PAGP-MIB
  CISCO-PING-MIB
  CISCO-PORT-STORM-CONTROL-MIB
  CISCO-PROCESS-MIB
  CiscopowerEthernetMIB
  CISCO-ENTITY-SENSOR-MIB
  ciscoPowerEthernetExtMIB
  ciscoPoePdMIB
  CISCO-STP-EXTENSIONS-MIB
  CISCO-SYSLOG-MIB
  CISCO-TCP-MIB
  CISCO-UDLDP-MIB
  CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
  CISCO-VLAN-MEMBERSHIP-MIB
  CISCO-VTP-MIB
  ENTITY-MIB
  ETHERLIKE-MIB
  IEEE8021-PAE-MIB
  IEEE8023-LAG-MIB
  IF-MIB
  SNMPv2-MIB
  TCP-MIB
  UDP-MIB

Standards

  IEEE 802.1D Spanning Tree Protocol
  IEEE 802.1p CoS Prioritization
  IEEE 802.1Q VLAN
  IEEE 802.1s
  IEEE 802.1w
  IEEE 802.1X
  IEEE 802.1ab (LLDP)
  IEEE 802.3ad
  IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
  IEEE 802.3af, 802.3at, and 802.3bt
  IEEE 802.3 10BASE-T
  IEEE 802.3u 100BASE-TX
  IEEE 802.3ab 1000BASE-T
  IEEE 802.3z 1000BASE-X
  RMON I and II standards
  SNMP v1, v2c, and v3
  IEEE 802.3az
  IEEE 802.1ax

RFC compliance

  RFC 768 - UDP
  RFC 783 - TFTP
  RFC 791 - IP
  RFC 792 - ICMP
  RFC 793 - TCP
  RFC 826 - ARP
  RFC 854 - Telnet
  RFC 951 - Bootstrap Protocol (BOOTP)
  RFC 959 - FTP
  RFC 1112 - IP Multicast and IGMP
  RFC 1157 - SNMP v1
  RFC 1166 - IP Addresses
  RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
  RFC 1305 - NTP
  RFC 1492 - TACACS+
  RFC 1493 - Bridge MIB
  RFC 1542 - BOOTP extensions
  RFC 1901 - SNMP v2C
  RFC 1902-1907 - SNMP v2
  RFC 7252 - CoAP
  RFC 1981 - MTU Path Discovery IPv6
  FRC 2068 - HTTP
  RFC 2131 - DHCP
  RFC 2138 - RADIUS
  RFC 2233 - IF MIB v3
  RFC 2373 - IPv6 Aggregatable Addrs
  RFC 2460 - IPv6
  RFC 2461 - IPv6 Neighbor Discovery
  RFC 2462 - IPv6 Autoconfiguration
  RFC 2463 - ICMP IPv6
  RFC 2474 - Differentiated Services (DiffServ) Precedence
  RFC 2597 - Assured Forwarding
  RFC 2598 - Expedited Forwarding
  RFC 2571 - SNMP Management
  RFC 3046 - DHCP Relay Agent Information Option
  RFC 3376 - IGMP v3
  RFC 3580 - 802.1X RADIUS

Note: RFC, MIB, and standards compliance is dependent on Cisco IOS Software level.

Table 11 shows the power consumption of standalone Cisco Catalyst Micro Switch Series switches based on Alliance for Telecommunications Industry Solutions (ATIS) testing using Internet Mix (IMIX) distribution stream traffic, with input voltage of 115VAC at 60 Hz and no PoE loading. The values given are the maximum possible power consumption numbers under the respective test scenarios.

Table 11.     Power consumption of standalone Cisco Catalyst Micro Switch

UUT

Measured Input P(W)

Max POE (W)

EnergyStar

No Link

Deep Sleep

Weighted Average Pw

SKU

Uplink

FEP

Input

Half Port Traffic

Full Port Traffic

PoE Test (No Traffic)

0.01% / EEE

10%

30%

50%

100%

0.01% / EEE

10%

30%

50%

100%

25%

50%

90%

100%

CMICR-4PC

Fixed

80W

115VAC

8.93

8.99

9.12

9.17

9.21

9.93

10.01

10.13

10.14

10.16

27.64

45.2

72.72

77.28

6.64

4.06

10.01

60W

1x 1G Cu 

1x 1G SFP

230VAC

8.92

9.04

9.18

9.2

9.21

9.91

10.05

10.13

10.16

10.2

27.36

44.67

72.57

76.73

6.69

4.09

10.05

60W

CMICR-4PS

Fixed 

80W

115VAC

9.19

9.26

9.36

9.39

9.42

10.84

10.98

11.08

11.1

11.14

27.83

45.36

72.78

78.66

6.61

5.55

10.98

60W

2x 1G SFP

230VAC

9.18

9.38

9.41

9.43

9.48

10.76

10.96

11.07

11.1

11.15

27.65

45.8

72.72

78.41

6.68

5.6

10.96

60W

CMICR-4PT

Fixed 

80W

115Vac

9.27

9.35

9.44

9.49

9.5

10.2

10.32

10.41

10.43

10.45

26.16

44

72.21

79.49

10.32

7.85

10.32

60W

1x 1G Cu and 1x 1G SFP/Cu Combo

230Vac

9.3

9.38

9.46

9.49

9.52

10.25

10.38

10.42

10.44

10.46

26.02

44.5

72.25

79.17

10.38

7.87

10.38

60W

Table 12.     Safety and compliance support information

Description

Specification

Safety standards

  UL 60950-1
  CAN/CSA 22.2 No. 60950-1
  EN 60950-1
  IEC 60950-1
  CE Marking
   AS/NZS 60950.1
  IEC/UL 62368-1(supersede IEC/UL 60950-1 in 2019)

Electromagnetic emissions certifications

  FCC Part 15, CFR 47, Class A, North America
  EN 55022 (CISPR22) and EN 55024 (CISPR24), CE marking, European Union
  AS/NZS, Class A, CISPR22:2004 or EN55022, Australia and New Zealand
  ICES-003 Issue 6: 2016
  KN 32: 2015
  TCVN 7189: 2009
  V-3/2015.04
  KN35: 2015
  TCVN 7317: 2003

Environmental

Reduction of Hazardous Substances (ROHS) 6

NEBS

NEBS not required

Mounting Options We offer the following different mounting options for the Cisco Catalyst Micro Switches.

Model

Mounting Options

CMICR-4PS

  Cable Duct

CMICR-4PC

  Din Rail

CMICR-4PT

  Desk Mount, Surface Mount

Ordering information

To place an order, consult Table 13 for ordering information and visit Cisco Commerce Workspace.

Table 13.     Ordering information

Cisco Catalyst Micro Switches

Part number

Description

CMICR-4PS

Catalyst Micro Switch for wall-jack deployments, 2x SFP uplinks

CMICR-4PC

Catalyst Micro Switch for wall-jack Deployments, 1x copper + 1x SFP uplink

CMICR-4PT

Catalyst Micro Switch for desktop deployments

 

Accessories

Part number

Description

CMICR-PWR-CNT

Molex power connector

CMICR-MSD-1G

Micro SD Card

Mounting Accessories for Wall jack / Din Rail versions

PID

Description

CMICR-BZL-L-OC

Long Off Centered Bezel

CMICR-BZL-S-OC

Short Off Centered Bezel

CMICR-BZL-S-C

Short Centered Bezel

CMICR-CLIP-DIN

DIN Rail Clip

CMICR-BRKT-S-OC

Short Off Centered Bracket

Mounting Accessory for desktop version

PID

Description

CMICR-BRKT-DSK

Desk Top Mounting Bracket

Warranty information

Cisco Catalyst Micro Switches come with an enhanced limited lifetime hardware warranty that includes 90 days of Cisco Technical Assistance Center (TAC) support and next-business-day hardware replacement free of change (see Table 14 for details).

Table 14.     Enhanced limited lifetime hardware warranty

Cisco Enhanced Limited Lifetime Hardware Warranty

Device covered

Applies to Cisco Catalyst Micro Switch models CMICR-4PS, CMICR-4PC, and CMICR-4PT.

Warranty duration

As long as the original customer owns the product.

End-of-life policy

In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance.

Hardware replacement

Cisco or its service center will use commercially reasonable efforts to ship a replacement for next-business-day delivery, where available. Otherwise, a replacement will be shipped within 10 working days after receipt of the return materials authorization (RMA) request. Actual delivery times might vary depending on customer location.

Effective date

Hardware warranty commences from the date of shipment to customer (and, in the case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco).

TAC support

Cisco will provide, during business hours, 8 hours per day, 5 days per week, basic configuration, diagnosis, and troubleshooting of device-level problems for up to a 90-day period from the date of shipment of the originally purchased Cisco Catalyst Micro Switch product. This support does not include solution-level or network-level support beyond the specific device under consideration.

Cisco.com access

Warranty allows guest access only to Cisco.com.

Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use. Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

Adding a Cisco technical services contract to your device coverage provides access to the Cisco Technical Assistance Center (TAC) beyond the 90-day period allowed by the warranty. It also can provide a variety of hardware replacement options to meet critical business needs, as well as updates for licensed premium Cisco IOS Software and registered access to the extensive Cisco.com knowledge base and support tools.

For additional information about warranty terms, visit https://www.cisco.com/go/warranty.

Cisco environmental sustainability

Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report.

Reference links to information about key environmental sustainability topics (mentioned in the “Environment Sustainability” section of the CSR Report) are provided in the following table:

Table 15.     Sustainability References

Sustainability topic

Reference

Information on product material content laws and regulations

Materials

Information on electronic waste laws and regulations, including products, batteries, and packaging

WEEE compliance

Cisco makes the packaging data available for informational purposes only. It may not reflect the most current legal developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice.

Cisco and Partner Services

Enable the innovative, secure, intelligent edge using personalized services from Cisco and our partners. Through a discovery process that begins with understanding your business objectives, we help you integrate the next-generation Cisco Catalyst fixed switches into your architecture and incorporate network services onto those platforms. Sharing knowledge and leading practices, we support your success every step of the way as you deploy, absorb, manage, and scale new technology. Choose from a flexible suite of support services (Table 16) designed to meet your business needs and help you maintain high-quality network performance while controlling operational costs.

Table 16.     Technical services available for Cisco Catalyst Micro Switches

Cisco Technical Services

Cisco Smart Net Total Care® Service

  Around-the-clock, global access to the Cisco TAC
  Unrestricted access to the extensive Cisco.com knowledge base and tools
  NBD, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement and onsite parts replacement and installation available
  Ongoing operating system software updates within the licensed feature set 1
  Proactive diagnostics and real-time alerts on Smart Call Home-enabled devices

Cisco Solution Support Service

  Provides a team of experts who act as primary point of contact to deliver centralized support, including in multivendor network environments
  Speed is paramount when problems arise, so we deliver on a 30-minute service level objective and prioritize Solution Support cases
  Expert guidance helps to enhance IT operations with fewer outages and faster problem resolution while maximizing performance and reliability of Catalyst 1000 Series switches
  We even look beyond identified problems and provide the necessary guidance needed to help you avoid any pitfalls before they can disrupt IT or your business
1 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set

Learn more about available services.

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.

For more information

For more information, contact your Cisco sales account rep or visit:
https://www.cisco.com/site/us/en/products/networking/switches/index.html

Document history

New or Revised Topic

Described In

Date

Added PSU-L-80W-ADPT and PSU-L-74W-ADPT in Table 7, updated the Available Passthrough Power in Table 8 and added Management and Standard Support Table 10

Table 7, 8 and 10

September 9, 2024

 

Learn more