PDF(141.1 KB) View with Adobe Reader on a variety of devices
Updated:August 19, 2014
Document ID:1518436648226540
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
DATA SHEET
PRODUCT OVERVIEW
The 6000-watt (W) power supply for the Cisco
® Catalyst
® 6500 Series chassis (Figure 1) is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W. When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input.)
All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.
Figure 1. Cisco Catalyst 6500 Series Chassis
FEATURES AND BENEFITS
The 6000W power supply offers the following features:
• Universal input (100-240 VAC, 50-60 Hz).
• Compatible with full output in Cisco Catalyst 6506-E, Catalyst 6509-E, and Catalyst 6513 switches. Works in Catalyst 6506 and Catalyst 6509 with a maximum output of 4000W.
• Redundant and hot swappable.
PRODUCT SPECIFICATIONS
Table 1-3 list product specifications for the 6000W power supply.
Table 1. Power Specifications
Description
Specification
Input-voltage range and frequency
100-240 VAC, 47-63 Hz
Input current (each input)
16A
Input-frequency range, output power
6000W if both inputs are 220 VAC
2900W if both inputs are active but at least 1 is at 110 VAC or a single input is active and at 220 VAC
2 green "INPUT OK," illuminate when input voltage is 85 VAC or greater
1 green "FAN OK," illuminates when the power supply fan is operating
1 red "OUTPUT FAIL," normally is off but illuminates when power supply outputs are out of regulation limits
Table 3. 6000W AC Power Supply Cable Specifications
Locale
Part Number
Cord Length
Plug Type Wall Appliance
Wall Plug Rating
North America (nonlocking) 200-240 VAC operation
CAB-AC-2500W-US1
14 ft (4.3 m)
NEMA 6-20
250 VAC, 16A
North America (locking) 200-240 VAC operation
CAB-AC-C6K-TWLK
14 ft (4.3 m)
NEMA L6-20
250 VAC, 16A
North America 100-120 VAC operation*
CAB-7513AC
14 ft (4.3 m)
NEMA 5-20
125 VAC, 20A
Continental Europe
CAB-AC-2500W-EU
14 ft (4.3 m)
CEE 7/7
250 VAC, 16A
Japan
CAB-7513AC
CAB-AC-2500W-US
CAB-AC-C6K-TWLK
14 ft (4.3 m)
NEMA 5-20**
NEMA 6-203
NEMA L6-20***
125 VAC, 20A
250 VAC, 16A
250 VAC, 16A
International
CAB-AC-2500W-INT
14 ft (4.3 m)
IEC 309
250 VAC, 16A
* The 6000W power supply operating on 110 VAC delivers 2900W.
** Ask your local electrical contractor to prepare the NEMA 5-20 power plug.
*** Ask your local electrical contractor to prepare the NEMA 6-20 or the NEMA L6-20 power plug.
POWER CONNECTION GUIDELINES FOR AC-POWERED SYSTEMS
Figure 2. 6000W Power Supply AC Power Cord Plugs and Appliance Coupler
SUMMARY
The Cisco Catalyst 6506-E, Catalyst 6509-E, and Catalyst 6513 chassis will have a full 6000W output with the power supply. The Catalyst 6506 and 6509 chassis will support a maximum of 4000W. The 6000W power supply will operate in both 110V and 220V mode.
ORDERING INFORMATION
To place an order, visit the
Cisco Ordering Home Page. Table 4 lists the ordering information for the 6000W power supply.
Table 4. Ordering Information
Part Number
Description
WS-CAC-6000W
Catalyst 6500 Series 6000W AC Power Supply
CAB-AC-2500W-US1
Power Cord, 250 VAC, 16A, straight blade NEMA 6-20 plug, United States
CAB-AC-2500W-EU
Power Cord, 250 VAC, 16A, Europe
CAB-AC-2500W-INT
Power Cord, 250 VAC, 16A, international
CAB-AC-C6K-TWLK
Power Cord, 250 VAC, 16A, twist lock NEMA L6-20 plug, United States
CAB-7513AC
AC Power Cord, North America (110V)
SERVICE AND SUPPORT
Cisco Systems
® offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, see
Cisco Technical Support Services or
Cisco Advanced Services.