Cisco Network Convergence System 560-4 Router Data Sheet

Data Sheet

Available Languages

Download Options

  • PDF
    (527.4 KB)
    View with Adobe Reader on a variety of devices
Updated:August 6, 2021

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (527.4 KB)
    View with Adobe Reader on a variety of devices
Updated:August 6, 2021
 

 

Cisco® NCS 560-4 Router is a full-featured, modular and programmable aggregation platform. It is designed for the cost-effective delivery of converged mobile, residential, and business services. The NCS 560-4 provides Redundancy, shallow depth, low power consumption, high Ethernet interface density and high services scale, optimized for aggregation and remote Point-Of-Presence (POP) applications.

The Cisco NCS 560-4 Router (Figure 1) provides a comprehensive and scalable feature set, supporting Layer 2 VPN, Layer 3 VPN, Ethernet VPN (E-VPN) and Multicast services in a compact design.

Cisco NCS 560-4 Router

Figure 1.            

Cisco NCS 560-4 Router

Product highlights

      4 RU small form factor with depth <300mm

      Fully redundant platform with 50 msec ISSU support

      Side-to-side or front-to-back airflow with a plenum

      5G ready with support for Segment Routing and EVPN

      6 x 100G support on NCS560 4 RU

      Supports industrial temperature conditions

      High Density of 1G/10G/40G/100G ethernet ports. 25G/50G on roadmap

      100G/200G CFP2 DCO support

      100G QSFP-DD ZR optics support on roadmap

      Low latency forwarding, typically <10 µs

      Precise frequency and phase/time synchronization using the latest industry standards

      Security- Trust Anchor infrastructure, secure boot, image signing, run-time defense

      Part of Cisco Certified Metro Fabric Design

      MEF 3.0 certified for carrier ethernet deployments

      Rich Quality of Service capabilities for different SLAs

      Excellent manageability

Major applications

Broadband aggregation

The modular Cisco NCS 560-4 Router supports broadband aggregation for delivering “any-play” services (voice, video, data, and mobility). Designed to support thousands of subscribers, the NCS 560 includes Quality of Service (QoS) features that allow the routers to scale to a large number of queues per device. Combined with a highly granular, three-level hierarchical QoS algorithm, a large number of queues can result in a greatly enhanced broadband user experience. This full-featured Layer 2 and Layer 3 router supports a variety of broadband applications, including IPTV and Video on Demand (VoD), enhancing and extending the Cisco Evolved Programmable Network architecture.

Pre-aggregation for mobile applications

Deployed as a pre-aggregation platform for mobile backhaul, the NCS 560-4 Router can aggregate cell sites and use Segment Routing (SR, SR-TE) or Multiprotocol Label Switching (MPLS) as a transport for Radio Access Network (RAN) backhaul traffic. It also provides the timing services required in today’s converged access networks by offering integrated support for the Building Integrated Timing Supply (BITS), 10 MHz, 1 Pulse Per Second (1PPS), and Time Of Day (TOD) interfaces. The router also supports Synchronous Ethernet (SyncE), IEEE-1588 Precision Time Protocol (G.8275.1 with G.8273.2 – Class B and G.8275.2), and Global Positioning System (GPS) interfaces. In addition, the NCS 560-4 Router can be deployed in small and rugged environments, due to its shallow depth and qualification for extended temperature ranges.

Metro ethernet aggregation

The NCS 560-4 Router is built to meet service provider requirements for Carrier Ethernet aggregation. It is optimized for remote central office and smaller aggregation sites where a full-featured, modular, small-footprint, and fully redundant aggregation platform is needed. This router offers service flexibility and delivers Layer 2, IP, MPLS, and Segment Routing transport for advanced L2VPN, L3VPN, EVPN and multicast services.

Major differentiators

The NCS 560-4 Router helps service providers deliver highly scalable advanced services for residential broadband, mobile, and Metro Ethernet applications. This allows an operator to provide differentiated and cost-effective services to end users.

Flexible deployment options

The NCS 560-4 Router is designed with a compact form factor to accommodate deployment in small spaces. Available with a range of mounting options, the router can be deployed in space-constrained locations such as ETSI 300-mm deep cabinets. The side-to-side airflow design allows two Cisco NCS 560-4 Routers to be mounted back-to-back in a 600-mm cabinet, while the extended temperature range supported by the router allows it to be deployed in locations with minimum environmental control. Small footprint and extended temperature range support allow service providers to extend the reach of their Carrier Ethernet networks to more challenging and remote locations, yet save money on air conditioning.

High availability and modularity

The NCS 560-4 Router is a modular platform. Cisco offers redundant Route Switch Processors (RSPs), AC and DC power supplies, a high-speed fan tray, and a wide range of Ethernet interface modules. The Ethernet interfaces are available in copper and fiber, with speeds ranging from 100 Mbps to 100 Gbps. The interface modules, power supplies, and fan tray are all field replaceable.

The design of the Cisco NCS 560-4 Router delivers in-box hardware redundancy and supports software redundancy with In-Service Software Upgrade (ISSU) support when a pair of route switch processors is inserted in the chassis.

Operational efficiency

The NCS 560-4 Router features essential capabilities that help service providers simplify and automate the management of their networks through device programmability and services orchestration, promoting efficiency gains in the deployment and operation of the networks. The router provides proactive diagnostic and telemetry tools which help service providers avoid potential problems before they occur, troubleshoot any problems, and implement solutions when problems are diagnosed.

System design

The NCS 560-4 Router is built as fully modular systems with a future-ready design. The router chassis supports online field replacement and upgrades of all components. The NCS 560-4 Router is designed to contain three Fan Trays, up to three Power Supplies, two Route Switch Processor (RSP) cards, and up to 6 Interface Module cards. All components support online replacement and field upgrades.

Fan trays

The NCS 560-4 Router has three high-speed fan tray slots, which must be populated for the system to operate. The Fan Trays contain redundant fans. The system continues to operate on single fan failures across the Fan Trays. The system has been designed to remain operational during the replacement of the Fan Trays. The duration of Fan Tray replacement has a hard time limit imposed on reinsertion of the fan tray depending on the system’s ambient temperature. In addition to cooling the chassis, the fan tray also contains a connector for dry-contact inputs and several system-level alarm LEDs.

Filter

The NCS 560-4 Router has a built-in, Field-serviceable dust Filter, located on the far right side of the chassis to allow optimal air flow.

Power supplies

AC and DC power supplies are available for NCS 560-4 Router. Depending on the system module configuration, and redundancy requirements, two or three power supplies might be needed. The system supports operation on a single power supply, while two power supplies will function in a load-share configuration and three power supplies will function in a 2+1 protection scheme. Mixing of AC and DC power supplies in a single operational chassis is supported.

Route switch processor

The Cisco NCS 560-4 Route Switch Processor (RSP4) is the centralized card in the system responsible for control plane, forwarding (data) plane and management plane, and also provides the network-timing. The Cisco NCS 560-4 Route Switch Processor is a Field Replaceable Unit (FRU).

Interface modules

The Cisco NCS 560-4 Router is a modular system with six interface module slots (slots 0 to 5). These slots support a variety of Ethernet interface modules, with interface speeds ranging from 100Mbps to 100Gbps.

Software

The Cisco NCS 560-4 Router operates with Cisco IOS® XR Software, which is a modular operating system. This software is designed to provide modular packaging, feature velocity, and powerful resiliency. For more information on the supported features and software capabilities, see the Cisco IOS XR Software for Cisco NCS 560-4 Router data sheet.

Network management

The Cisco NCS 560-4 Router is supported in the Cisco Evolved Programmable Network (EPN) architectures. Cisco Evolved Programmable Networks Manager (EPN-M) is an end-to-end network management solution that drastically simplifies the design, provisioning, and management of carrier-grade networks. It is a comprehensive solution that centralizes and automates service design, fulfillment, assurance, and performance analysis to help service providers and enterprises lower their costs while meeting high customer expectations.

In addition to the support for EPN-M, the Cisco NCS 560-4 Router also supports device programmability and Services Orchestration capabilities through a variety of embedded Transport Controllers, SDN Controllers and Network Services Orchestration Solutions.

Product specifications

Tables 2 through 4 list the product, power, and environmental specifications for the Cisco NCS 560-4 Router. Tables 5 and 6 provide safety, compliance, and certification information.

Table 1.        Cisco NCS 560-4 Router System specifications

Description

Cisco NCS 560-4 Router

Physical specifications1

NCS560-4

Height: 7 in. (177.88 mm) - 4RU

Width: 17.44 in. (443 mm)

Depth: 9.5 in. (243.1 mm)

Weight:

  55.56 lb (25.2 kg) with two RSPs, three DC power supplies, and loaded with a typical combination of interface module cards
  18 lb (8.12 kg) for an empty chassis

N560-4-RSP4E / N560-RSP4

Height: 1.28 in. (32.5 mm)

Width: 14.17 in. (360 mm)

Depth: 8.66 in. (220 mm)

Weight: 6.24 lb (2.83 kg)

N560-4-FAN-H

Height: 2.51 in. (64 mm)

Width: 2.6 in. (66 mm)

Depth: 8.66 in. (220 mm)

Weight: 1.39 lb (0.63 kg)

N560-4-PWR-FAN

Height: 1.77 in. (45 mm)

Width: 2.6 in. (66 mm)

Depth: 8.66 in. (220 mm)

Weight: 1.04 lb (0.47 kg)

N560-4-FILTER

Height: 3.32 in. (84.3 mm)

Width: 0.3 in. (7.6 mm)

Depth: 9.69 in. (246.1 mm)

Weight: 0.17 lb (0.07 kg)

Rack mounts

19 in. rack mount is an integral part of the chassis

ETSI rack mount kit adapter

23 in. rack mount kit adapter

Interface modules

6 interface module slots

Route switch processors

2 RSP slots

Fan tray

3 fan trays with fan redundancy at a system level

4 dry contact input alarms on PWR fan tray

Air flow

Side-to-side airflow; inlet on the right side, outlet on the left side when looking from the front. Front-to-back airflow option available through additional Plenum

Power supplies

3 Power supply slots. Up to 3 Power supplies (1200W AC or DC) can be used in Load share mode

The System can operate on a single power supply and supports mixing of AC and DC power supplies in a single chassis

Chassis MTBF at 40°C (104°F) operating temperature (25°C / 77°F ambient temperature)

11,780,000 hours

Fan Tray MTBF at 40°C (104°F) operating temperature (25°C / 77°F ambient temperature)

PWR Fan Tray: 989,000 hours

High Speed Fan Tray: 857,000 hours

Table 2.        Power specifications

Description

Cisco NCS 560-4 Router

 

Power consumption

Maximum input power 975W (@ 65 degrees Celsius maximum operating temperature, including loss). This is equivalent to 3327 BTU per hr.

Typical input power depends on the actual configuration and can be checked using the Cisco power calculator tool at http://tools.cisco.com/cpc/

AC input voltage and frequency

Voltage range: 85 to 264 VAC, nominal 115 to 230 VAC

Frequency Range: 47 to 63 Hz, nominal 50 to 60 Hz

 

AC Power Supply MTBF at 40°C operating temperature

1,300,000 hours

 

DC input voltage

For 1200W DC power supply, voltage range: –40.8V to –72V DC, nominal –48V/–60V DC

 

DC Power Supply MTBF at 40°C operating temperature

1,460,000 hours

 

Power Supply shipment packaging size (LxWxH)

15.44 in. x 9.44 in. x 4.31 in.

 

Power Supply shipment weight

3.6 lbs.

 

Table 3.        Environmental specifications

Description

Cisco NCS 560-4 Router

Operating environment and altitude1

–40 to 65°C operating temperature

–60 to 1800m operating altitude (for full operating temperature range)

Up to 4000m operating altitude (at up to 40°C temperature)

Outside plant

For an outside plant installation, it is required that the router be protected against airborne contaminants, dust, moisture, insects, pests, corrosive gases, polluted air, or other reactive elements present in the outside air. To achieve this level of protection, it is recommended that the unit be installed in an environmentally sealed enclosure. Cabinets that conform to GR-487 are considered environmentally sealed. In addition, closures with a minimum NEMA rating of 4 or a minimum IP 66 rating can be considered environmentally sealed

Relative humidity

5 to 95%, noncondensing

Acoustic noise3

Acoustic noise peak operation complies with Network Equipment Building Standards (NEBS) GR-63-Core Issue 5 sound power level of 70 dBA at 27°C operation as measured by the ANSI S12.10/ISO 7779 NAIS noise measurement test standard

Storage environment

Temperature: –40 to 70°C altitude: 15,000 ft (4570m)

Seismic

Zone 4

Hazardous substances

Reduction of Hazardous Substances (ROHS) 6

1.Minimum temperature range of chassis, fan tray, RSP engine, power supply, optics, and interface modules will dictate the supported operating temperature range. Maximum cooling fan tray module is assumed.

Table 4.        Safety and compliance

Type

Standards

Safety

  UL 60950-1, 2 nd edition
  CAN/CSA C22.2 No. 60950-1-07 2 nd edition
  IEC 60950-1, 2 nd edition
  EN 60950-1, 2 nd edition
  AS/NZS 60950.1:2003

Electromagnetic

  FCC CFR47 Part 15 Class A

Emissions compliance

  EN 55032:2012/ AC:2013
  EN 55032:2015
  CISPR 32 Edition 2
  EN61000-3-2: 2014
  EN61000-3-3: 2013
  EN 300 386 V1.6.1
  ICES-003 Issue 6: 2016
  VCCI Class A
  TCVN 7189: 2009
  CNS13438: 2006
  KN 32: 2015
  EN301 489-19:2017: V2.1.0
  EN301 489-1:2017: V2.1.1
  EN 303 413 V1.1.1

Immunity compliance

  CISPR24: 2010 + A1: 2015
  EN300 386:2012:V1.6.1
  EN55024: 2010 + A1: 2015
  TCVN 7317: 2003
  EN55035:2017
  EN61000-6-1:2007
  EN61000-6-2:2005
  IEC61000-6-1:2016:Ed:3
  IEC61000-6-2:2016:Ed:3
  KN35:2015
  EN301 489-19:2017: V2.1.0
  EN301 489-1:2017: V2.1.1

NEBS1

  GR-63-CORE Issue 5
  GR-1089-CORE Issue 7
  SR-3580 NEBS Level 3
  GR-3108 (Class-1 for non-coated PIDs and Class-2 for conformal coated PIDs)

ETSI

  ETS/EN 300 119 Part 4 1
  ETS/EN 300 019 - Storage: Class 1.2, Transportation: Class 2.3, In-Use/Operational: Class 3.2
  ETS/EN 300 753

Network synchronization

  ANSI T1.101
  GR-1244-CORE
  GR-253-CORE
  ITU-T G.703 clause 5
  ITU-T G.703 clause 9
  ITU-T G.781
  ITU-T G.813
  ITU-T G.823
  ITU-T G.824
  ITU-T G.8261/Y.1361
  ITU-T G.8265.1
  ITU-T G.8273.2 – Class B
  ITU-T G.8275.1
  ITU-T G.8275.2
  IEEE1588-2008
1. Notable exception: Compliant with ETSI racks without doors

Table 5.        Certifications

Description

Cisco NCS 560-4 Router

Common Criteria

Cisco NCS 560-4 Router running Cisco IOS XR 6.6.25 Software

MEF

Carrier Ethernet (CE) 1.0 and CE 2.0. MEF 9 and MEF 14

Carrier Ethernet (CE) 3.0 with XR 6.6.25 Software

IEEE 1588-2008

1588 SLAVE (IEEE CONFORMITY ASSESSMENT PROGRAM)

  IEEE 1588 Conformity Test Suite for Frequency Synchronization in Telecommunications Networks - Packet Slave Clock
  IEEE Std 1588 -2008 and Recommendation ITU-T G.8265.1 (10/2010) with Amendments 1 (04/2011) and 2 (10/2012)

Ordering information

Table 6.        Ordering information for NCS 560 4 RU Hardware

Part Number

Description

N560-4-SYS-E

NCS 560-4 4RU System ATO, 800G, XL scale, Redundant RSP

N560-4-SYS

NCS 560-4 4RU System ATO, 800G, L scale, Redundant RSP

N560-4-SYS-E-BUN1

NCS 560-4 4RU System ATO, 800G, XL scale, Single RSP

N560-4-SYS-BUN1

NCS 560-4 4RU System ATO, 800G, L scale, Single RSP

NCS560-4

NCS 560-4 Router Chassis

NCS560-4=

NCS 560-4 Router Chassis, Spare

N560-4-RSP4E

NCS 560-4 Route Switch Processor 4 Enhanced, 800G, XL scale

N560-4-RSP4E=

NCS 560-4 Route Switch Processor 4 Enhanced, 800G, XL scale, Spare

N560-4-RSP4

NCS 560-4 Route Switch Processor 4, 800G, L scale

N560-4RSP4=

NCS 560-4 Route Switch Processor 4, 800G, L scale, Spare

N560-4-FAN-H

NCS 560-4 High Speed Fan Tray

N560-4-FAN-H=

NCS 560-4 High Speed Fan Tray, Spare

N560-4-PWR-FAN

NCS 560-4 Power High Speed Fan Tray

N560-4-PWR-FAN=

NCS 560-4 Power High Speed Fan Tray, Spare

N560-4-FILTER

NCS 560-4 Filter

N560-4-FILTER=

NCS 560-4 Filter Spare

N560-4-RCKMNT-U

NCS 560-4 Rackmount Universal Adapter – ETSI, 23 inch

N560-4-RCKMNT-U=

NCS 560-4 Rackmount Universal Adapter – ETSI, 23 inch, Spare

N560-4-CAB-BRKT

NCS 560-4 Cable Guide Bracket

N560-4-CAB-BRKT=

NCS 560-4 Cable Guide Bracket, Spare

N560-4-F2B-AIR-U

NCS 560-4 Front to Back Airflow Plenum, Universal

N560-4-F2B-AIR-U=

NCS 560-4 Front to Back Airflow Plenum, Universal, Spare

N560-4-F2B-AIR-V

NCS 560-4 Front to Back Airflow Plenum, Vertical Mount

N560-4-F2B-AIR-V=

NCS 560-4 Front to Back Airflow Plenum, Vertical Mount, Spare

A900-PWR1200-A

ASR 900 1200W AC Power Supply

A900-PWR1200-A=

ASR 900 1200W AC Power Supply, Spare

A900-PWR1200-D

ASR 900 1200W DC Power Supply

A900-PWR1200-D=

ASR 900 1200W DC Power Supply, Spare

N560-PWR1200-D-E

NCS 560 1200W DC Power Supply Enhanced, Dying Gasp

N560-PWR1200-D-E=

NCS 560 1200W DC Power Supply Enhanced, Dying Gasp, Spare

N560-4-PWR-BLANK

NCS 560-4 Power Supply Blank Cover

N560-4-PWR-BLANK=

NCS 560-4 Power Supply Blank Cover, Spare

N560-4-RSP-BLANK

NCS 560-4 Route Switch Processor Type-B Blank Cover

N560-4-RSP-BLANK=

NCS 560-4 Route Switch Processor Type-B Blank Cover, Spare

N560-4-IMA-BLANK

NCS 560-4 Interface Module Blank Cover

N560-4-IMA-BLANK=

NCS 560-4 Interface Module Blank Cover, Spare

Table 7.        Ordering information for software licenses available on NCS 560 portfolio

Product ID (PID)

Description

ESS-AC-100G-RTU-1

Access Essentials SW Right-to-Use v1.0 per 100G

ADV-AC-100G-RTU-1

Access Advantage w/o Essentials SW RTU v1.0 100G

ADN-AC-100G-RTU-1

Access Advantage w/ Essentials SW RTU v1.0 100G

ESS-ADN-AC-100G-RT

Access Essentials to Advantage Upgrade RTU per 100G

ESS-AC-100G-SIA-3

Access Essentials SIA 100G 3-5 year term

ESS-AC-100G-SIA-5

Access Essentials SIA 100G 5-10 year term

ADV-AC-100G-SIA-3

Access Advantage w/o Essentials SIA 100G 3-5 year term

ADV-AC-100G-SIA-5

Access Advantage w/o Essentials SIA 100G 5-10 year term

ADN-AC-100G-SIA-3

Access Advantage w/ Essentials SIA 100G 3-5 year term

ADN-AC-100G-SIA-5

Access Advantage w/ Essentials SIA 100G 5-10 year term

ESS-ADN-AC100G-S3

Access Essentials to Advantage Upgrade SIA 100G 3-5 yrs

ESS-ADN-AC100G-S5

Access Essentials to Advantage Upgrade SIA 100G 5-10 yrs

N560-FC-SW

NCS 560 Series additional Software Licenses (RTU, SIA)

Warranty information

Warranty information is available on Cisco.com at the Product Warranties page.

Product sustainability

Information about Cisco’s environmental, social and governance (ESG) initiatives and performance is provided in Cisco’s CSR and sustainability reporting.

Table 8.        Product sustainability

Sustainability Topic

Reference

General

Information on product-material-content laws and regulations

Materials

Information on electronic waste laws and regulations, including our products, batteries and packaging

WEEE Compliance

Information on product takeback and resuse program

Cisco Takeback and Reuse Program

Sustainability Inquiries

Contact: csr_inquiries@cisco.com

Material

Product packaging weight and materials

Contact: environment@cisco.com

Service and Support

Cisco offers a wide range of services programs to help accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, promoting high levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Cisco is committed to reducing your total cost of ownership. Cisco offers a portfolio of technical support services to help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 7 are available as part of the Cisco Carrier Ethernet Switching Service and Support solution and are available directly from Cisco and through resellers.

Table 9.        Service and Support

Advanced Services

Features

Benefits

Cisco Total Implementation Solutions (TIS), available directly from Cisco

Cisco Packaged TIS, available through resellers

  Project management
  Site survey, configuration, and deployment
  Installation, text, and cutover
  Training
  Major moves, adds, and changes
  Design review and product staging
  Supplement existing staff
  Help ensure functions meet needs
  Mitigate risk

Cisco SP Base Support and Service Provider-Based Onsite Support, available directly from Cisco

Cisco Packaged Service Provider- Based Support, available through resellers

  24-hour access to software updates
  Web access to technical repositories
  Telephone support through the Cisco Technical Assistance Center (TAC)
  Advance replacement of hardware parts
  Facilitate proactive or expedited problem resolution
  Lower total cost of ownership by taking advantage of Cisco expertise and knowledge
  Reduce network downtime

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.

Document history

New or revised topic

Described in

Date

Updated Table 7. Ordering information for software licenses available on NCS 560 portfolio

Ethernet Interface Modules

7/14/2021

 

 

 

Learn more