Cisco Catalyst IR1800 Rugged Series Routers Data Sheet

Data Sheet

Available Languages

Download Options

  • PDF
    (1.8 MB)
    View with Adobe Reader on a variety of devices
Updated:November 3, 2023

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

 

Get up to 30% extra off Cisco Catalyst IR1100, Catalyst IR1800, or Catalyst IR8300 Rugged Series Routers and Catalyst SD-WAN Manager subscriptions when you purchase them in a bundle.

Available Languages

Download Options

  • PDF
    (1.8 MB)
    View with Adobe Reader on a variety of devices
Updated:November 3, 2023
 

 

Cisco Catalyst IR1800 Rugged Series Routers deliver performance, security, and flexibility to help you accelerate your digitization journey at the edge.

Product overview

Cisco Catalyst IR1800 Rugged Series Routers are Cisco IoT’s most versatile routers, designed for mobile or stationary deployments. They deliver secure, high-performance, 5G routers in a modular design that support private LTE, FirstNet, Verizon Frontline, Wi-Fi6 and Gigabit Ethernet. Designed with a high level of modularity, they can be customized to help you reduce costs and make your networking investments ready for the future, keeping in mind the needs of tomorrow. With high bandwidth and throughputs from 5G and Wi-Fi 6, they enable you to connect all your assets, converge networks and drive efficiency.

The Catalyst IR1800 Series offers enterprise-grade security from the hardware to the network communications all the way to the industrial assets. The routers are powered by Cisco IOS® XE, Cisco’s fully programmable next-generation operating system.

Scale and simplify operations at the edge with powerful network management tools such as the Cisco IoT Operations Dashboard, Cisco DNA Center, and Cisco vManage for configuration, monitoring, and troubleshooting.

The IR1800 Series is built to withstand the harsh environments found in transportation, public safety, and oil and gas applications as well as a variety of stationary deployments. Automotive certifications and features such as Controller Area Network (CAN) bus support, dead reckoning and Global Navigation Satellite System (GNSS), and ignition power management make it ideal for secure, reliable connectivity in transit and public safety applications, including first responder vehicles, passenger fleets, service fleets, and commercial truck fleets. The router also provides reliable, rugged connectivity for stationary assets such as oil and gas equipment, solar and wind farms, ATM machines and EV charging stations.

Product Highlights

Figure 1.               

Product Highlights

Use cases

Passenger and service fleets

Keep your fleet vehicles connected wherever they go and effectively track them in real time through built-in GPS systems. Power a seamless experience for passengers on board with Wi-Fi 6.

Reduce unplanned maintenance and repairs and minimize operating expenses with route optimization. Centrally manage all fleet vehicles through a single dashboard.

Public safety

Improve public safety and security, provide better response time, and increase cost efficiencies with secure, reliable access to real-time data in police cars and first responder vehicles such as fire trucks and ambulances. Move critical video data and other sensitive information from incident commanders to field officers over a secure network.

Mass transit

Enable fast and reliable on-board Wi-Fi, location-based services, and automated ticketing for passengers. Enhance passenger monitoring using video, both on board and within the station environment. Know the exact location to provide an estimated time of arrival with GPS.

Use data insights from the vehicles to gain operational efficiencies and reduce maintenance costs.

Oil and gas

Monitor pipelines, adjust valve pressure, optimize production, and prevent unplanned downtime.

Enable machine visibility and equipment monitoring to prevent faults before they occur while reducing costs.

Renewable energy production

Collect telemetry, monitor operations, detect incidents, easily gain remote access to control equipment, and ensure physical security in remote locations while leveraging cellular networks to simply connect individual wind turbines and solar panels.

EV chargers

With the risks of broken hardware, unexpected shutoffs, payment problems and more, you need reliable connectivity to your EV infrastructure to monitor and maintain equipment remotely to quickly resolve issues and reduce truck rolls to deliver a seamless customer experience.

Roadways and intersections

Highways and transportation agencies require reliable networks to connect speed cameras, monitoring cameras and more using backhaul technologies such as 4G and 5G with secure remote access capabilities to remotely maintain equipment.

Connected machines

Whether you’re dealing with heavy industrial machinery or remote systems such as ATMs, kiosks, and vending machines, you need connectivity for the machine to access business applications or just to troubleshoot issues and maintain uptimes.

Mining

Connect light duty trucks and other assets using a combination of private cellular networks and Wi-Fi due to spotty public cellular coverage and need for cost-effective high throughput connectivity for high bandwidth applications such as video and file transfers and on-board connectivity for fleets.

Features and benefits

Key features and benefits

Table 1.             Features and benefits

Feature

Benefit

Reliable connectivity for mission-critical mobile environments

  The modular IR1800 with dual cellular slots is capable of running multiple cellular services at once for mission-critical applications, allowing dual cellular band redundancy.
  Supports modular IEEE 802.11ax Wi-Fi 6. The dual-radio Wi-Fi (2.4 and 5 GHz) can provide access point capability and also backhaul capability (in a stationary condition) to connect to infrastructure Wi-Fi.
  Certified for transportation, making it ideal for transit and public safety applications.
  With dead reckoning GNSS, provides the exact location and path of fleet vehicles, even in environments with no cellular connectivity and no line-of-sight satellite connectivity.
  Ignition power management keeps the router running while the vehicle is turned off and protects the battery from over-discharging by the router.
  Offers native CAN bus support, allowing the extraction of vehicle data that can be used for telematics, enabling predictive maintenance, reducing the cost of fuel, and enhancing safety.

Modular design

  Ultra-modular design supports evolving business and technical needs, protecting your investment.
  Supports multiple different modules, including public or private 4G/LTE and 5G, Wi-Fi 6, FirstNet certified public safety LTE, SSD, and advanced GNSS, thus providing a high level of flexibility to choose the desired configuration to suit individual deployments.

Security

  Provides end-to-end multilayer enterprise-grade security that is part of Cisco’s ultra-secure and advanced Cisco IOS XE operating system.
  For added security, the IR1800 supports advanced enterprise-grade security suites such as unified threat detection for deployments requiring a higher level of enterprise-class security.
  Supports Cisco Cyber Vision, providing visibility into industrial assets connected to the router
(post FCS).

Edge computing

  Comes with built-in edge compute resources and Cisco IOx App hosting support to securely run your own applications at the edge.
  Supports Cisco’s Edge Intelligence suite to unlock business intelligence.

Integrated storage

  Provides support to expand the internal storage to save multimedia and mission-critical data at the edge with its field-replaceable industrial-grade SSD.

SD-WAN

  Supports Cisco IOS XE SD-WAN technology to effectively manage hundreds of disparate locations, lowering TCO and operating at scale.
  Support advanced SD-WAN security on IR1835 with 8GB memory.

Public Safety Certifications

  FirstNet Ready
  Verizon Frontline

Prominent features

Cisco Catalyst IR1800 Rugged Series Routers portfolio

Cisco Catalyst IR1800 Rugged Series Routers are best-in-class ruggedized routers designed for assets that are mobile or on the move, stationary or remote. These highly flexible and modular routers are 5G ready and adopt the latest Wi-Fi 6 standards. The IR1800 Series consists of four models: IR1821-K9, IR1831-K9, IR1833-K9, and IR1835-K9.

A picture containing text, screenshot, fontDescription automatically generated

Figure 2.               

Models in the Catalyst IR1800 Series

The table below explains the top-level features of the models in the IR1800 Series.

Table 2.             Comparison of key features

Feature

IR1821-K9

IR1831-K9

IR1833-K9

IR1835-K9

Memory

4 GB

4 GB

4 GB

8 GB

Pluggable slots (cellular)

1

2

2

2

Wide pluggable slot (Wi-Fi)

1

1

1

1

CAN bus

Ignition power management

Gigabit Ethernet (GE) LAN (x4)

Combo RJ-45/SFP GE WAN port (L3) (x1)

Micro USB console

Power over Ethernet (PoE)/PoE+

SSD slot

Automotive dead reckoning GNSS slot

Digital I/O (x4)

Serial interface

RS-232 (1)

RS-232 (2)

RS-232 (2)

RS-232 (1),
RS-232/485 (1)

Placement of IR1800 interface ports

A close-up of a deviceDescription automatically generated with low confidence

Figure 3.               

IR1821-K9 interface ports

A close-up of a deviceDescription automatically generated with low confidence

Figure 4.               

IR1831-K9 interface ports

A picture containing screenshot, electronics, circuitDescription automatically generated

Figure 5.               

IR1833-K9 interface ports

A picture containing screenshot, electronics, circuitDescription automatically generated

Figure 6.               

IR1835-K9 interface ports

A picture containing screenshot, text, multimedia software, graphics softwareDescription automatically generated

Figure 7.               

Top view

The Catalyst IR1800 Series also introduces Wi-Fi 6 in a pluggable form factor. This ruggedized wide pluggable module provides the latest in Wi-Fi technology and is compatible with the latest wireless controllers from Cisco. The module can run in Control and Provisioning of Wireless Access Points (CAPWAP) mode and Embedded Wireless Controller (EWC) mode, as well as Work Group Bridge (WGB) mode.

A picture containing electronics, electrical supply, electronic engineering, circuitDescription automatically generated

Figure 8.               

Wi-Fi 6 wide pluggable module

The Catalyst IR1800 Wi-Fi 6 supports the following deployment scenarios and modes.

A picture containing text, screenshot, vehicle, land vehicleDescription automatically generated

Figure 9.               

Wi-Fi 6 deployment scenarios

Memory specifications

Table 3.             Memory specifications

Feature

Specification

Default and maximum DRAM

  4 GB (IR1821, IR1831, IR1833)
  8 GB (IR1835)

Default and maximum flash memory

  4 GB (IR1821, IR1831, IR1833, 1835)

Expandable SSD storage

  Cisco’s industrial-grade field-replaceable 100-GB storage (IRM-SSD-100G)
(IR1833 and IR1835 only)

Backup flash storage

  Provides an added layer of protection from improper shutdown cycles, thus preventing any kind of memory corruptions.

Physical specifications

Table 4.             Physical specifications

Feature

Specification

Physical dimensions
(H x W x D)

  2.20 x 11.04 x 8.06 in. (55.9 x 280.4 x 204.7 mm)
  2.20 x 11.04 x 9.73 in. (55.9 x 280.4 x 247.0 mm) with additional IP54-KIT (IR1800-IP54-KIT)

Weight

  2.4 kg (5.3 lb) (without any modules)
  3.1 kg (6.8 lb) (fully configured)

IP rating

  IP40 rated
  IP54 rated with additional IP54-KIT (IR1800-IP54-KIT)

Mounting options

  DIN rail
  Panel mount

Power specifications

Table 5.             Power specifications

Feature

Specification

Power input

  Nominal voltage: +12V and +24V
  Minimum and maximum input voltage: 9V - 36V
  Maximum and Minimum input current: 7.56A - 1.99A

Power consumption

  At idle: 16W (at 12V), 17W (at 24V)
  Typical: 22W (at 12V), 23W (at 24V)
  Maximum: 27W (without PoE), 71W (with PoE)

When powering the vehicle though OBD2 connector in a vehicle, maximum current value must be matched with OBD2 fusing.

Interfaces

Table 6.             Interfaces

Feature

Specification

WAN interfaces

  Pluggable Interface Module slots

      IR1821: 1x for Cisco Cellular Pluggable Interface Modules

      IR1831, IR1833, IR1835: 2x for Cisco Cellular Pluggable Interface Modules

  Wide interface pluggable module slots-

      1x on all IR1800 models for Cisco Wi-Fi 6 Wide Interface Pluggable Module

  Combo 10/100/1000 Mbps Ethernet port (RJ-45 and SFP) (1x on all IR1800 models)

LAN interfaces

  4x 10/100/1000 Mbps RJ-45 Ethernet ports

Asynchronous serial interfaces

  IR1821: 1x RS-232 DTE port
  IR1831, IR1833: 1x RS-232 DTE port and 1x RS-232 DCE port
  IR1835: 1x RS-232 DTE port and 1x RS-232 DCE/RS-422/RS-485 port

Console

  1 micro-USB port

Automotive dead reckoning GNSS

  IR1833, IR1835: 1x slot for automotive dead reckoning GNSS module (IRM-GNSS-ADR)

Expandable storage

  IR1833, IR1835: 1x slot for Cisco’s industrial 100-GB SSD (IRM-SSD-100G)

Power input/CAN bus combo

  4-pin Molex Mini-Fit port for power and CAN bus (see accessories for more details)

Digital I/O

  IR1835: 4x digital I/O ports

Ignition power management

  All IR1800 models have automatic ignition power management capability for Ignition sense.
  IR1835 supports Ignition power management with Ignition signal switching.

USB port

  1x USB 2.0 Type A

Status LEDs

  Top surface-

      1x system status LED

  Front surface

      1x ignition power management LED

      1x system status LED

      4x Gigabit Ethernet LEDs

      2x Combo Gigabit Ethernet-SFP LEDs

      IR1833, IR1835: 1x expandable storage LED

      IR1833, IR1835: 1x automotive dead reckoning GNSS LED

      IR1835: 4x digital I/O LEDs

  Cellular and Wi-Fi modules have power and status LEDs on the modules

Environmental specifications

Table 7.             Environmental specifications

Feature

Specification

Environmental operating temperature range

  –40° to 140°F (–40° to 60°C) in a sealed NEMA cabinet with no airflow
  –40° to 158°F (–40° to 70°C) in a vented cabinet with 40 linear feet per minute (LFM) of air
  –40° to 167°F (–40° to 75°C) in a forced air enclosure with 200 LFM of air
  Type tested at 85°C for 16 hours
  Refer to the IR1800 Hardware Installation Guide (HIG) for the operating temperature range for pluggable cellular modules and wide pluggable Wi-Fi modules

Operating altitude

  Maximum altitude: 13.800 ft per IEC 68-2-41

Standards and industry specifications

Table 8.             Standards and industry specifications

Feature

Specification

Mechanical

  SAE J1455 (Automobile Standard)
  Temperature cycle stress test
  Active 10-day temperature and humidity test
  MIL STD 810G (Military Standard)
  Method 514.6, Category 4 – Random Vibration
  Method 516.6, Procedure V – Crash Hazard Shock
  Method 516.6, Procedure I – Functional Shock

Automotive

  UNECE R10
  CISPR25
  ISO 7637 – 2
  ISO 11452 – 2/4

Hazardous locations and ITE safety

  UL 121201 (Class l, Div. 2, groups A-D)
  CSA 213 (Class l, Div. 2, groups A-D)
  UL/CSA 60079-0, -15 (Class l, Zone 2, Gc/IIC)
  IEC 60079-0, 7 -15 IECEx test report (Class l, Zone 2, Gc/IIC)
  EN 60079-0, 7, 15 ATEX certificate (Class l, Zone 2, Gc/IIC)
  UL/CSA 60950-1
  UL/CSA 62368-1
  IEC/EN 60950-1
  IEC/EN 62368-1

EMC

  FCC part 47 CFR Part 15 Subpart B Class A
  EN 5032/CISPR 32 Class A
  VCCI Class A, AS/NZS CISPR 32 Class A
  CISPR 11 Class A, ICES 003 Class A
  CNS 13438 Class A, KN 32 Class A
  EN 300 386
  CISPR35/EN 55035
  EN/IEC61000-4-2 (ESD - Air/Contact Charge)
  EN/IEC61000-4-3 (Radiated Immunity)
  EN/IEC61000-4-4 (Electro Fast Transients Burst)
  EN/IEC61000-4-5 (Surge)
  EN/IEC61000-4-6 (Conducted Immunity)
  EN/IEC61000-4-8 (Power Frequency Magnetic Field Immunity)
  EN/IEC61000-4-9 (Pulse Magnetic Field Immunity)
  EN/IEC61000-4-11 (Voltage Disturbance Immunity)

Radio (cellular)

  FCC 47 CFR Part 22,24,27
  FCC 47 CFR Part 2 MPE
  RSS 102, 132, 133
  AS/NZ: ACMA EMR, AS/CA S042.1, 4
  Japan MIC Article 2, 9
  EN 301 489-1,19,52
  EN 301 908-1,2,13
  EN 301 511
  EN 303 413
  EN 62311 MPE

Radio (Wi-Fi)

  FCC CFR Part 15.247, 15.407
  RSS 247 Issues 5
  EN 300 328, EN 301 893
  AS/NZ 4268:2018
  2018.7 (MSIT notice 2018-38), 2017.9 (MSIT notice # 2017-10)
  NOTACNCANEH N° 14/2013, NOTACNCANEH N° 14/2013
  Act n ° 14448 (2017-12-04)
  MIIT R-2002-353, MIIT R-2002-277, MIIT R-2012-620
  LP0002;2018
  Résolution 1985/2017 + Res. 1517/2018 + Res. 855/2019

IR1800-compatible pluggable WAN modules

Cellular pluggable modules

Table 9a.    LTE (3GPP Category 4) modules

Feature

P-LTE-MNA

P-LTE-VZ

P-LTE-US

P-LTE-GB

LTE bands

LTE bands 2, 4, 5, 12, 13, 14, 17, and 66

FDD LTE 1700 MHz and 2100 MHz (band 66 Ext AWS), 700 MHz (bands 17, 14, 13, 12), 850 MHz (band 5 CLR), 1700 MHz and 2100 MHz (band 4 AWS), 1900 MHz (band 2)

LTE bands 4 and 13

FDD LTE 700 MHz (band 13), 1700 MHz and 2100 MHz (band 4 AWS)

 LTE bands 2, 4, 5, and 12

FDD LTE 700 MHz (band 17), 700 MHz (band 12), 850 MHz (band 5 CLR), 1700 MHz and 2100 MHz (band 4 AWS)

LTE bands 1, 3, 7, 8, 20, and 28

FDD LTE 700 MHz (band 28), 800 MHz (band 20), 900 MHz (band 8), 1800 MHz (band 3), 2100 MHz (band 1), and 2600 MHz (band 7)

Backward compatibility

UMTS, HSPA+ (bands 2, 4, 5)

-

HSPA+ (bands 2, 4, 5)

UMTS, HSPA+ (bands 1, 8), EDGE, GSM, GPRS (900/1800)

Theoretical download and upload speeds

150 and 50 Mbps

150 and 50 Mbps

150 and 50 Mbps

150 and 50 Mbps

United States

Multicarrier (AT&T and Verizon)

Verizon

AT&T

Europe

Yes

Band 14

Yes

FirstNet Ready

Approved by AT&T FirstNet

Table 9b.    LTE (3GPP Category 4) modules

Feature

P-LTE-IN

P-LTE-JN

LTE bands

LTE bands 1, 3, 5, 8, 40, and 41*

FDD LTE 2100 MHz (band 1), 1800 MHz (band 3), 850 MHz (band 5), 900 MHz (band 8)

TDD LTE 2300 MHz (band 40), 2500 MHz (band 41)

*Band 41 supported frequency range: (2535 to 2655 MHz)

LTE bands 1, 3, 8, 11, 18, 19, and 21

FDD LTE 2100 MHz (band 1), 1800 MHz (band 3), 900 MHz (band 8), 1500 MHz (band 11), 850 MHz (bands 18, 19), 1500 MHz (band 21)

Backward compatibility

HSPA+, UMTS (bands 1, 8)

HSPA+, UMTS (bands 1, 6, 19)

Theoretical download and upload speeds

150 and 50 Mbps

150 and 50 Mbps

India

Yes

Japan

Yes (NTT Docomo, KDDI, Softbank)

China

Yes

Table 10.       LTE Advanced (3GPP Category 6) modules

Feature

P-LTEA-EA

P-LTEA-LA

LTE bands

LTE bands 1-5, 7, 8, 12, 13, 20, 25, 26, 29, 30, and 41

FDD LTE 700 MHz (band 12), 700 MHz (band 29), 800 MHz (band 20), 850 MHz (band 5 CLR), 850 MHz (band 26 Low), 900 MHz (band 8), 1800 MHz (band 3), 1900 MHz (band 2), 1900 MHz (PCS band 25), 1700 MHz and 2100 MHz (band 4 AWS), 2100 MHz (band 1), 2300 MHz (band 30), or 2600 MHz (band 7)

TDD LTE 2500 MHz (band 41)

Carrier aggregation band combinations:

1+8; 2+(2,5,12,13,29); 3+(7,20); 4+(4,5,12,13,29); 7+(7,20); 12+30, 5+30, and 41+41

LTE bands 1, 3, 5, 7, 8, 18, 19, 21, 28, 38, 39, 40, and 41

FDD LTE 700 MHz (band 28), 850 MHz (band 5 CLR), 850 MHz (bands 18 and 19 Low), 900 MHz (band 8), 1500 MHz (band 21), 1800 MHz (band 3), 2100 MHz (band 1), or 2600 MHz (band 7)

TDD LTE 1900 MHz (band 39), 2300 MHz (band 40), 2500 MHz (band 41), or 2600 MHz (band 38)

Carrier aggregation band combinations:

1+(8,18,19,21); 3+(5,7,19,28); 7+(5,7,28); 19+21, 38+38, 39+39,40+40, and 41+41

Theoretical download and upload speeds3

300 and 50 Mbps

300 and 50 Mbps

Dying Gasp

Yes

Yes

United States

AT&T & Verizon

Europe

Yes

Band 14

Yes

Canada

Yes

Australia and New Zealand

Yes (approved by Telstra)

Japan

Yes (NTT Docomo, KDDI, Softbank)

India, Singapore, Malaysia, Thailand

Yes

China

Yes

United Arab Emirates

Yes

Table 11.       LTE Advanced Pro (3GPP Category 18) modules

Feature

P-LTEAP18-GL

LTE bands

LTE bands 1-5, 7, 8, 12-14, 17, 18-20, 25, 26, 28-30, 32, 38-43, 46, 48, 66, and 71.

FDD LTE 600 MHz (band 71), 700 MHz (bands 12, 13, 14, 17, 28, and 29), 800 MHz (band 20), 850 MHz (bands 5, 18, 19, and 26), 900 MHz (band 8), 1500 MHz (band 32), 1700 MHz (bands 4 and 66), 1800 MHz (band 3), 1900 MHz (bands 2 and 25), 2100 MHz (band 1), 2300 MHz (band 30), 2600 MHz (band 7)

TDD LTE 1900 MHz (band 39), 2300 MHz (band 40), 2500 MHz (band 41), 2600 MHz (band 38), 3500 MHz (bands 42 and 48), 3700 MHz (band 43), 5200 MHz (band 46)

Theoretical download and upload speeds3

1.2 Gbps/200 Mbps

Dying Gasp

Yes

United States

Multicarrier (AT&T and Verizon)

Europe

Yes

Canada

Yes

Australia

Yes

China

Yes

Japan

Yes

Band 14

Yes

FirstNet certification

Yes

Band 48 (CBRS)

Yes

Note:       Band 30 must be disabled for mobile deployments in United States.

Table 12.       5G Sub 6 GHz module available with the IR1800

Region theaters

P-5GS6-GL1

RF Bands

5G FR1 - n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79

LTE bands 1-5, 7-8, 12-14, 17-20, 25, 26, 28-30, 32, 34, 38-43, 46(LAA), 48(CBRS), 66 and 71

Theoretical download and upload speeds

3.3 Gbps/400 Mbps

United States

Multicarrier (AT&T, Verizon, T-mobile)

Europe

Yes

Canada

Yes (Bell, Telus, Rogers)

APJC

Yes (Australia, New Zealand, Japan, Hong Kong, Indonesia, Singapore, India)

Japan

Yes (NTT Docomo)

Australia

Telstra

Band 14, Band 48 (CBRS)

Yes

Wi-Fi 6 pluggable module performance (support from Cisco IOS XE 17.6 onward)

Table 13.       Wi-Fi 6 pluggable module performance

Feature

WP-WIFI6 Wi-Fi performance

Supported wireless LAN controllers

  Cisco Catalyst 9800 Series Wireless Controllers

802.11ax capabilities

  2x2 uplink/downlink multiuser multiple-input multiple-output (MU-MIMO) with two spatial streams
  Uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA)
  Target Wake Time (TWT)
  Basic Service Set (BSS) coloring
  Maximum Ratio Combining (MRC)
  802.11ax beamforming
  20-, 40-, and 80-MHz channels
  PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic shift diversity (CSD) support
  Wi-Fi Protected Access 3 (WPA3) support

802.11ac capabilities

  2x2 downlink MU-MIMO with 2 spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, and 80-MHz channels
  PHY data rates up to 866.7 Mbps (80 MHz with 5 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  WPA3 support

802.11n version 2.0 (and related) capabilities

  2x2 MIMO with 2 spatial streams
  MRC
  802.11n and 802.11a/g
  20- and 40-MHz channels
  PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  Power LED indicates power status to module

Dimensions
(W x L x H)

3.66 x 3.29 x 0.85 in. (9.30 x 8.36 x 2.16 cm)

Available transmit power settings (max/min)

  2.4 GHz – total with two active antennas

      23 dBm (200 mW) max for Complementary Code-Keying (CCK) rates

      21 dBm (125 mW) max for OFDM rates

      -7 dBm (0.2 mW) min

  5 GHz – total with two active antennas

      20 dBm (100 mW) max

      -7 dBm (0.2 mW) min

WP-WIFI6-S – Thailand

2.4GHz - Total with two chain active

  20 dBm (100 mW) max for Complementary Code-Keying (CCK) rates
  20 dBm (100 mW) max for OFDM rates

5GHz – Total with two chain active

  5150-5350MHz - 23 dBm (200 mW EIRP) max for all OFDM rates
  5470-5700MHz – 30dBm (1W EIRP) max for all OFDM rates
  5745-5825MHz – 30dBm (1W EIRP) Max for all OFDM rates

Cisco Small Form-Factor Pluggable (SFP) modules

The IR1800 offers Ethernet (copper and fiber) uplink options through SFP modules (software support post- FCS).

Supported Ethernet SFP modules

The Ethernet SFP module provides connections to other devices. These field-replaceable transceiver modules provide the uplink interfaces. RJ-45 connectors allow for copper connections.

Table 14.       Supported SFP modules

GE SFP

Distance

Fiber

Classification

GLC-SX-MM-RGD

220 to 550 m

MMF

Industrial (-40° to +85°C)

GLC-LX-SM-RGD

550 m to 10 km

MMF/SMF

Industrial (-40° to +85°C)

GLC-ZX-SM-RGD

70 km

SMF

Industrial (-40° to +85°C)

GLC-SX-MMD

220 to 550 m

MMF

Extended (-5° to +85°C)

GLC-LH-SMD

550 m to 10 km

MMF/SMF

Extended (-5° to +85°C)

GLC-ZX-SMD

70 km

SMF

Extended (-5° to +85°C)

GLC-BX-U

10 km

SMF

Commercial (0° to +70°C)

GLC-BX-D

10 km

SMF

Commercial (0° to +70°C)

GLC-LH-MMD

550 m to 10 km

MMF/SMF

Extended (-5° to +85°C)

GLC-EX-SMD

40 km

SMF

Extended (-5° to +85°C)

GLC-FE-100FX-RGD

2 km

MMF

Industrial (-40C to +85C)

GLC-FE-100LX-RGD

10 km

SMF

Industrial (-40C to +85C)

GLC-FE-100FX

2 km

MMF

Commercial (0C to +70C)

GLC-FE-100LX

10 km

SMF

Commercial (0C to +70C)

GLC-FE-100EX

40 km

SMF

Commercial (0C to +70C)

GLC-FE-100ZX

80 km

SMF

Commercial (0C to +70C)

GLC-FE-100BX-U

10 km

SMF

Commercial (0C to +70C)

GLC-FE-100BX-D

10 km

SMF

Commercial (0C to +70C)

GLC-TE

100 m

N/A (RJ-45)

Extended (-5C to +85C)

Other IR1800-compatible pluggable modules

Automotive dead reckoning GNSS module

The IR1800 Series introduces an advanced automotive dead reckoning GNSS pluggable module (for the IR1833-K9 and IR1835-K9 platforms): IRM-GNSS-ADR.

The module is a powerful automotive-grade GNSS system equipped with automotive dead reckoning software, an embedded 6-axis sensor Micro-Electromechanical System (MEMS), and a powerful core. Whenever GNSS coverage is missing or compromised, the IRM-GNSS-ADR provides accurate estimates of a vehicle’s or moving device’s position and velocity by combining speed and heading data from internal sensors with On-Board Diagnostics (OBD-II) data from the vehicle’s CAN bus.

This multi constellation, pluggable module is ideal for telematics applications that require continuous and reliable accuracy for navigation and tracking.

The table below shows detailed specifications for the automotive dead reckoning GNSS module.

Table 15.       Automotive dead reckoning GNSS specifications

Feature

Specification

Frequency bands supported

  GPS (L1)
  GLONASS (L1, FDMA) (supported in future software releases)
  Galileo (E1) (supported in future software releases)
  BeiDou (B1) (supported in future software releases)

Standards

  NMEA, RTCM 104

GNSS channels

  48-channel GNSS architecture

Positional accuracy

  1.6 m (CEP50)

Frequency

  10 Hz navigation, SBAS, 1PPS

A-GPS support

  Yes, local ephemeris prediction, server predicted ephemeris (future software support)

Jammer rejection

  Yes

MEMS sensors

  Embedded 6-axis (3D gyro + 3D accelerometer)

100-GB additional storage module

The IR1800 Series supports memory expansion to 100 GB (for the IR1833-K9 and IR1835-K9 platforms): IRM-SSD-100G. This pluggable industrial SSD can be used to store mission-critical data and applications or multimedia files.

Table 16.       SSD specifications

Feature

Specification

SSD memory

100 GB

Endurance

33 terabytes written (TBW)

Replacement recommendation

Replacement recommended when wear ratio reaches 90%

Accessories

The Catalyst IR1800 Series introduces multiple new accessories, including a new 7-in-1 antenna, a set of OBD-II cables, and an IP54 kit.

Table 17.       Compatible antennas

Antenna

Description

ANT-7-5G4WL2G1-O

7-in-1 outdoor vehicle mount antenna- 4G LTE SMA x4, Wi-Fi dual band RP-SMA x2, GNSS SMA x1

LTE-ANTM2-SMA-D

4G LTE dipole antenna 698-960, 1448-1511, 1710-2690 MHz, SMA

5G-ANTM-SMA-D

5G Sub-6 & LTE Advanced Pro capable dipole antenna, SMA

W-ANTM2050D-RPSMA

Wi-Fi dual band swivel dipole antenna, RP-SMA

ANT-4G-OMNI-OUT-N

Outdoor omnidirectional 4G antenna, N connector, 698-3800 MHz

ANT-5G-OMNI-OUT-N

Outdoor omnidirectional 617 – 5950 MHz antenna, N connector

4G-LTE-ANTM-O-3-B

3-in-1 outdoor black antenna, 4G LTE SMA x2, GPS SMA x1

ANT-3-4G2G1-O

3-in-1 outdoor antenna- 4G LTE TNC x2, GPS SMA x1

ANT-2-4G2-O

2-in-1 outdoor vehicle mount antenna- 4G LTE TNC x2

ANT-5-4G2WL2G1-O

5-in-1 outdoor vehicle mount antenna- 4G LTE TNC x2, Wi-Fi dual band RP-TNC x2, GPS SMA x1

5G-ANTM-O-4-B

9-in-1 outdoor antenna- 5G Sub-6 GHz / 4G LTE SMA x4, Wi-Fi dual band RP-SMA x4, GPS SMA x1

Please refer to the antenna guide for all the antenna options available for the industrial routers:

https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/antennas/installing-combined/industrial-routers-and-industrial-wireless-antenna-guide.html.

https://www.cisco.com/c/dam/td-xml/en_us/iot/antennas/scenarios/Antenna-Installation-Scenarios.pdf.

Table 18.       OBD-II cables

Cable

Description (all OBD-II cables are 4.35 m in length)

OBD2-J1962YA-MF4

OBD-II (J1962) Type A to IR1800 cable with type 1 Y-splitting bypass harness

OBD2-J1962YB-MF4

OBD-II (J1962) Type B to IR1800 cable with type 2 Y-splitting bypass harness

OBD2-J1939Y2-MF4

OBD-II (J1939) Type 2 heavy duty diagnostic harness for Volvo/Mack

OBD2-J1939Y1-MF4

OBD-II (J1939) Type 1 to IR1800 cable with type 1 y-splitting bypass harness and auxiliary (discrete voltage) inputs

OBD2-J1708Y-MF4

OBD-II (J1708) to IR1800 cable with type 1 y-splitting bypass harness and auxiliary (discrete voltage) inputs

OBD2-J1962VMB-MF4

J1962-VM-Type B Volvo & Mack

OBD-II cables provide power and CAN bus connectivity to the Catalyst IR1800.

Note:       When powering an IR1800 from an ODB2 connector, fusing must match the maximum power consumption requirement of the IR1800 variant attached to it. OBD2 connectors generally fuse at 60W.

IP54 kit

The IR1800 Series is IP40 rated by design. This IP rating can further be improved to IP54 with an additional IP54 kit (IR1800-IP54-KIT).

A picture containing screenshot, boxDescription automatically generated

Figure 10.           

Catalyst IR1800 with IP54 kit

M12 kit

The IR1800 router can be used in Mass-Transit use cases such as railways and buses requiring M12 connectors using the optional M12 Conversion Kit. The kit comes with the front M12 Adapter assembly as well as the IP54 kit. This improves the IP rating of the whole unit to IP54 and makes the unit EN50155 compliant for railways and bus use cases.

The kit is made of die cast aluminum with paint and texture matching the IR1800 chassis. It includes:

       1 M12 GE Copper Uplink

       4 M12 GE LAN Ports

       1 RS232/485* M12 port

       1 GPS / GNSS SMA connector

       1 M12 T-code power / CANBUS connector

*RS-485 interface only available in IR1835

A close up of a deviceDescription automatically generated with low confidence

 

A black electronic device with blue knobs and buttonsDescription automatically generated with low confidence

Table 19.       M-12 Connector Kit

PID

Description

IRM-1800-M12KIT

M12 Conversion Kit for IR1800

IRM-1800-M12KIT=

M12 Conversion Kit for IR1800 - Spare

Software details and management options

Software details

The Catalyst IR1800 Series runs on Cisco’s latest ultra-secure Cisco IOS XE. The table below details key features of Cisco IOS XE on the IR1800.

Table 20.       Software details

Feature

Description

Cisco IOS Software requirements

  Cisco IOS XE Software: Universal Cisco IOS Software image
  Cisco IOS XE Software Release 17.5.1 or later
  Cisco IOS XE Software: Unified image for Autonomous and Controller (SD-WAN) mode

IPv4 and IPv6 services features

  Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2) and RIPng (IPv6)
  Generic Routing Encapsulation (GRE) and Multipoint GRE (MGRE)
  Standard 802.1d Spanning Tree Protocol (STP)
  Network Address Translation (NAT)
  Dynamic Host Configuration Protocol (DHCP) server, relay, and client for IPv4 and IPv6
  Dynamic DNS (DDNS)
  DNS proxy
  DNS spoofing
  Access control Lists (ACLs) for IPv4 and IPv6
  IPv4 and IPv6 multicast
  IP Service-Level Agreement (IP SLA)
  Open Shortest Path First (OSPF) v2 and v3
  Multiprotocol Border Gateway Protocol (MP-BGP)
  Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv4 and IPv6
  Virtual Route Forwarding (VRF) Lite
  Next-Hop Resolution Protocol (NHRP)
  Asynchronous serial data encapsulation and relay
  Layer 2 Tunneling Protocol (L2TP) v3 over subinterfaces and VLAN

Security features

Secure connectivity

  Trusted Anchor Module (TAM)
  Hardware-accelerated encryption with minimal impact to system performance
  Next-Generation Encryption (NGE) and Quantum Computing Resistant (QCR) algorithms such as AES- 256, SHA-384, and SHA-512
  Public-Key Infrastructure (PKI) support
  20 IPsec tunnels
  NAT transparency
  Dynamic Multipoint VPN (DMVPN)
  Tunnel-less Group Encrypted Transport VPN (GETVPN)
  Flex VPN
  IPsec stateful failover
  Secure Sockets Layer (SSL) VPN for secure remote access
  VRF-aware IPsec
  IPsec over IPv6

Cisco IOS Firewall

  Zone-based policy firewall
  VRF-aware stateful inspection routing firewall
  Stateful inspection transparent firewall
  Advanced application inspection and control
  Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
  Dynamic and static port security
  Firewall stateful failover
  VRF-aware firewall

Integrated threat control

  Control-Plane Policing (CoPP)
  Flexible packet matching
  Network foundation protection

Cisco Umbrella

  As supported by IOS-XE
  Advanced SD-WAN security features supported on IR1835

Quality of Service (QoS) features

  Provides LTE QoS with support for up to 8 concurrent bearers on each cellular WAN interface for traffic classification and prioritization
  Provides traffic precedence to delay-sensitive and mission-critical services
  Facilitates low-latency routing of delay-sensitive industrial applications
  Supported on all LAN and WAN interfaces, including cellular
  Low Latency Queuing (LLQ)
  Weighted Fair Queuing (WFQ)
  Class-Based WFQ (CBWFQ)
  Class-Based Traffic Shaping (CBTS)
  Class-Based Traffic Policing (CBTP)
  Policy-Based Routing (PBR)
  Class-Based QoS MIB
  Class of Service (CoS) to Differentiated Services Code Point (DSCP) mapping
  Class-Based Weighted Random Early Detection (CBWRED)
  Resource Reservation Protocol (RSVP)
  Real-Time Transport Protocol (RTP) header compression (cRTP)
  Differentiated Services (DiffServ)
  QoS pre-classify and pre-fragmentation

High-availability features

  Dual active LTE backhaul
  Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
  Hot Standby Router Protocol (HSRP)
  Dual SIM support on the LTE module for cellular failover
  WAN monitoring to handle dual-SIM failover

IPv6 features

  IPv6 addressing architecture
  IPv6 unicast and multicast forwarding
  IPv6 ACLs
  IPv6 over cellular, including DHCP Prefix Delegation
  IPv6 routing (Static, RIPng, OSPFv3, EIGRP, MP-BGP)
  IPv6 domain name resolution
  IPv6 DHCP services

The Catalyst IR1800 supports multiple management solutions to deploy and manage large-scale deployments at their various stages.

Table 21.       Supported management solutions

Operational phase

Application

Description

Device staging and configuration for a few routers

Cisco WebUI

A GUI-based device-management tool that simplifies provisioning of devices for a small-scale deployment through easy-to-use wizards.

Deploy, manage, monitor, and maintain IoT routers and assets at scale

Cisco IoT Operations Dashboard

  A cloud-based dashboard that empowers OT/IT collaboration to deploy, monitor, and gain insights from Cisco networking devices and the assets they connect, simply and securely at scale.
  Rapid-scaling zero-touch deployment and secure enrollment for tens of thousands of routers
  Enhanced security: Role-based access and user audit trail and secure communications for data transport across networks, VPN tunnels, geo- fencing, alerts, and notifications for data and physical security.
  Increased reliability: Reliable communications over cellular or Ethernet networks, lifecycle management, and 24/7 real-time monitoring and alerts.

Extend your enterprise network to configure, monitor, and manage industrial assets

Cisco Digital Network Architecture (Cisco DNA) with SD-WAN

  Cisco DNA offers a network infrastructure that is not only fully programmable and open to third–party innovation, but can also fully and seamlessly integrate the cloud as an infrastructure component.
  Simplifies and automates processes and workflow by bringing the notion of user-aware and application–aware policies into the foreground of network operations.
  With Cisco DNA, the network can provide continuous feedback to simplify and optimize network operations.
  Single management dashboard for configuration and management of WAN.
  Cisco SD-WAN (vManage) automates application flexibility over multiple connections, such as the internet, MPLS, and wireless 4G LTE/5G (advanced SDWAN security features only available on IR1835).

The Catalyst IR1800 supports multiple embedded management capabilities.

Table 22.       Embedded management capabilities

Feature

Description

Cisco IOS Embedded Event Manager (EEM)

A distributed and customized approach to event detection and recovery.

Provides the ability to monitor events and take corrective or any other desired action when the monitored events, such as a high or low threshold, occur.

Cisco IOS XE IP SLA

Helps assure the performance of new, business-critical IP applications as well as IP services by actively monitoring and reliably reporting traffic statistics such as jitter, response time, packet loss, and connectivity.

Simple Network Management Protocol (SNMP), Syslog, NetFlow

Open-standards-based network monitoring and accounting tools, such as SNMP for 3G, 4G, ignition power, ADR-GNSS, mSATA, etc., provide a common management platform for many different devices.

LTE network management and diagnostics

A dedicated diagnostic port on a cellular module enables logging of data during debugging sessions that can be analyzed by industry-standard tools such as Spirent Universal Diagnostic Monitor (UDM).

Cisco IOS XE telemetry/YANG model

Telemetry is an automated communications process by which measurements and other data are collected at remote or inaccessible points and transmitted to the receiving equipment for monitoring. Telemetry provides a mechanism to stream YANG-modeled data to a data collector.

Software licensing

The Catalyst IR1800 introduces a dual network stack along with throughput licenses. Appropriate combinations can be selected according to need.

Network stack

There are two network stacks:

     Network Essentials

     Network Advantage

These stacks provide various capabilities. The Network Essentials license offers the essential elements of routing and security necessary for typical IoT deployments. The Network Advantage license enables advanced features such as MPLS, L2TPv3 for a highly scalable and cost-effective solution, mobile IP for seamless migration between networks, and application-aware QoS policies for built-in intelligence, in addition to the features offered by Network Essentials.

The figure below explains the capabilities provided by the licenses.

A screenshot of a computerDescription automatically generated with medium confidence

Figure 11.           

Licensing details

Throughput licenses

The IR1800 has three throughput license options.

Table 23.       Licenses and throughput

License

Tier

Aggregate throughput

Comment

Default (DEF)

T0

50 Mbps

This is the default tier with 50 Mbps aggregate throughput.

Performance (PERF)

T1

250 Mbps

This tier provides 250 Mbps aggregate throughput.

Boost (BOOS)

T2

2G

This tier provides 2 Gbps aggregate throughput.

Uncapped (UNC)

T2

Uncapped

This tier allows the device to use its full hardware capacity.

Select an appropriate combination of network stack and throughput tier based on your requirements.

Export regulations require HSEC license as a mandatory attach with Boost License.

A single Cisco IOS XE universal image encompassing all functions is delivered with the product. Software feature licenses are preinstalled at the factory, depending on the selection made at the time of purchase, simplifying software delivery and decreasing the operational costs of the deployment. Licenses can be upgraded after deployment by going through the Cisco Smart License activation process. For a more detailed overview of Cisco licensing, go to cisco.com/go/licensingguide.

Ordering information

The Catalyst IR1800 Series is a Smart License-enabled product. Cisco Smart Accounts and Virtual Accounts are required to order the product. For more information on how to order the Catalyst IR1800 and Cisco Smart Accounts, visit the Cisco Smart Account user guide.

Ordering the Catalyst IR1800 can be divided into three major sections:

1.     Operating system and licenses (step 2)

2.     Pluggable modules (steps 3 through 7)

3.     Accessories (step 8 and later)

To place an order, select the right product IDs from the tables below in sequential order.

Table 24.          Product ordering process

Step 1.      Select the base platform.

Hardware (chassis)

Description

IR1821-K9

Cisco Catalyst IR1821 Rugged Router

IR1831-K9

Cisco Catalyst IR1831 Rugged Router

IR1833-K9

Cisco Catalyst IR1833 Rugged Router

IR1835-K9

Cisco Catalyst IR1835 Rugged Router

Step 2.      Select the network stack and throughput tier.

Licenses

Network Essentials

Network Advantage

Throughput tier

Aggregate throughput

SL-1800-NE/DEF-K9

SL-1800-NA/DEF-K9

T0 (default)

50 Mbps

SL-1800-NE/PERF-K9

SL-1800-NA/PERF-K9

T1 (Performance)

250 Mbps

SL-1800-NE/BOOS-K9

SL-1800-NA/BOOS-K9

T2 (Boost)

2Gbps

SL-1800-NE/UNC-K9

SL-1800-NA/UNC-K9

T2(UNC)

Uncapped

 

Spare Licenses

Network Essentials

Network Advantage

Throughput tier

Aggregate throughput

 

SL-1800-NA/DEF-K9=

T0 (default)

30 Mbps

SL-1800-NE/PER-K9=

SL-1800-NA/PER-K9=

T1 (Performance)

200 Mbps

SL-1800-NE/BOO-K9=

SL-1800-NA/BOO-K9=

T2 (Boost)

Uncapped

SL-1800-NE/UNC-K9

SL-1800-NA/UNC-K9

T2(UNC)

Uncapped

The T2 (Boost) and T2 (Uncapped) license requires an additional mandatory L-18-HSEC-K9 license.

Step 3.      Select the cellular pluggable modules.

Cellular module

Description

P-LTEAP18-GL(=)

Category 18 LTE module for North America, Europe, and Asia Pacific

P-LTEA-EA(=)

Category 6 LTE module for North America, Europe, and Middle East

P-LTEA-LA(=)

Category 6 LTE module for Asia Pacific and Latin America

P-LTE-MNA(=)

Category 4 LTE module for AT&T, FirstNet Ready and Verizon, US

P-LTE-US(=)

Category 4 LTE module for AT&T, U.S

P-LTE-VZ(=)

Category 4 LTE module for Verizon, U.S

P-LTE-GB(=)

Category 4 LTE module for Europe

P-LTE-IN(=)

Category 4 LTE module for India

P-LTE-JN(=)

Category 4 LTE module for Japan

Step 4.      Select the option of a preinstalled Verizon SIM card (if required).

Verizon SIM card

Description

LTE-SIM-VZ(=)

Verizon SIM (preinstalled) for zero-touch deployment

Step 5.      Select the Wi-Fi 6 pluggable module.

Wi-Fi 6 pluggable module

CAPWAP mode

EWC mode

Description

WP-WIFI6-x(=)

WP-WIFI6-EWC-x(=)

Wi-Fi 6 can be shipped in CAPWAP mode or Embedded Wireless Controller (EWC) mode based on the product ID selected

‘x’ denotes the country/regional code for Wi-Fi frequency (e.g., A/B/C, etc.)

Wireless LAN Compliance Lookup can be used to choose the right country/regional code

Step 6.      Select the automotive dead reckoning pluggable GNSS module (only for IR1833-K9 and IR1835-K9).

Dead reckoning GNSS

Description

IRM-GNSS-ADR(=)

Automotive dead reckoning GNSS pluggable module

Step 7.      Select the additional 100-GB SSD module (only for IR1833-K9 and IR1835-K9).

SSD

Description

IRM-SSD-100G(=)

100-GB industrial-grade field-replaceable SSD

Step 8.      Select the power adapter and appropriate mating cord (if using a power brick and power cable).

Power supply and cables

Description

PWR-MF4-125W-AC(=)

AC to DC power adapter for IR1800- 125W

IR-PWR-G2A-NA(=)

Power Cord - North America

IR-PWR-G2A-BR(=)

Power Cord - Brazil

IR-PWR-G2A-AU(=)

Power Cord – Australia

IR-PWR-G2A-CE(=)

Power Cord – Central Europe

IR-PWR-G2A-ISR(=)

Power Cord – Israel

IR-PWR-G2A-ID(=)

Power Cord - India

IR-PWR-G2A-UK(=)

Power Cord - United Kingdom

IR-PWR-G2A-ITA(=)

Power Cord – Italy

IR-PWR-G2A-AR(=)

Power Cord – Argentina

IR-PWR-G2A-JP(=)

Power Cord – Japan

IR-PWR-G2A-AP(=)

Power Cord – Asia Pacific

IR-PWR-G2A-CN(=)

Power Cord – China

IR-PWR-G2A-SA(=)

Power Cord – South Africa

IR-PWR-G2A-SWI(=)

Power Cord - Switzerland

Step 9.      Select the right OBD-II cable (for on-the-move/vehicle deployments).
(An OBD-II cable can be used to power the IR1800 from the OBD-II port of a vehicle, along with connecting to the CAN bus of the vehicle for vehicle data.)

OBD-II cable

Description

OBD2-J1962YA-MF4(=)

OBD-II (J1962) Type A to IR1800 cable with type 1 Y-splitting bypass harness

OBD2-J1962YB-MF4(=)

OBD-II (J1962) Type B to IR1800 cable with type 2 Y-splitting bypass harness

OBD2-J1939Y2-MF4(=)

OBD-II (J1939) Type 2 heavy duty diagnostic harness for Volvo/Mack

OBD2-J1939Y1-MF4(=)

OBD-II (J1939) Type 1 to IR1800 cable with type 1 y-splitting bypass harness and auxiliary (discrete voltage) inputs

OBD2-J1708Y-MF4(=)

OBD-II (J1708) to IR1800 cable with type 1 y-splitting bypass harness and auxiliary (discrete voltage) inputs

OBD2-J1962VMB-MF4(=)

J1962-VM-Type B Volvo & Mack

Step 10.        Select the right antennas and antenna stand for the use case/deployment.

Antenna

Description

ANT-7-5G4WL2G1-O(=)

7-in-1 outdoor vehicle mount antenna- 4G LTE SMA x4, Wi-Fi dual band RP-SMA x2, GNSS SMA x1

LTE-ANTM2-SMA-D(=)

4G LTE dipole antenna 698-960, 1448-1511, 1710-2690 MHz, SMA

5G-ANTM-SMA-D(=)

5G Sub-6 & LTE Advanced Pro capable dipole antenna, SMA

W-ANTM2050D-RPSMA(=)

Wi-Fi dual band swivel dipole antenna, RP-SMA

ANT-4G-OMNI-OUT-N(=)

Outdoor omnidirectional 4G antenna, N connector, 698-3800 MHz

ANT-5G-OMNI-OUT-N(=)

Outdoor omnidirectional 617 – 5950 MHz antenna, N connector

4G-LTE-ANTM-O-3-B(=)

3-in-1 outdoor black antenna, 4G LTE SMA x2, GPS SMA x1

ANT-3-4G2G1-O(=)

3-in-1 outdoor antenna- 4G LTE TNC x2, GPS SMA x1

ANT-2-4G2-O(=)

2-in-1 outdoor vehicle mount antenna- 4G LTE TNC x2

ANT-5-4G2WL2G1-O(=)

5-in-1 outdoor vehicle mount antenna- 4G LTE TNC x2, Wi-Fi dual band RP-TNC x2, GPS SMA x1

5G-ANTM-O-4-B(=)

9-in-1 outdoor antenna- 5G Sub-6 GHz / 4G LTE SMA x4, Wi-Fi dual band RP-SMA x4, GPS SMA x1

Step 11.  Select the DIN rail (if using a DIN rail mount).

Mounting option

Description

IR1800-DINRAIL(=)

DIN rail mount

Step 12.  Select the IP54 Kit (if you require an IP54 system).

IP54 option

Description

IR1800-IP54-KIT(=)

IP54 Kit for IR1800

Step 13.  Select the appropriate SFP module (if needed).

Ethernet SFP

Distance

Fiber

Classification

GLC-SX-MM-RGD

220 to 550 m

MMF

Industrial (-40C to +85C)

GLC-LX-SM-RGD

550 m to 10 km

MMF/SMF

Industrial (-40C to +85C)

GLC-ZX-SM-RGD

70 km

SMF

Industrial (-40C to +85C)

GLC-SX-MMD

220 to 550 m

MMF

Extended (-5C to +85C)

GLC-LH-SMD

550 m to 10 km

MMF/SMF

Extended (-5C to +85C)

GLC-ZX-SMD

70 km

SMF

Extended (-5C to +85C)

GLC-BX-U

10 km

SMF

Commercial (0C to +70C)

GLC-BX-D

10 km

SMF

Commercial (0C to +70C)

GLC-LH-MMD

550 m to10 km

MMF/SMF

Extended (-5C to +85C)

GLC-EX-SMD

40 km

SMF

Extended (-5C to +85C)

GLC-FE-100FX-RGD

2 km

MMF

Industrial (-40C to +85C)

GLC-FE-100LX-RGD

10 km

SMF

Industrial (-40C to +85C)

GLC-FE-100FX

2 km

MMF

Commercial (0C to +70C)

GLC-FE-100LX

10 km

SMF

Commercial (0C to +70C)

GLC-FE-100EX

40 km

SMF

Commercial (0C to +70C)

GLC-FE-100ZX

80 km

SMF

Commercial (0C to +70C)

GLC-FE-100BX-U

10 km

SMF

Commercial (0C to +70C)

GLC-FE-100BX-D

10 km

SMF

Commercial (0C to +70C)

GLC-TE

100 m

NA (RJ-45)

Extended (-5C to +85C)

Step 14.  Select other accessories as needed.

Other accessories

Description

Power cable

CAB-PWR-15-MF4

Power cable when directly connecting to a DC source (such as a vehicle battery)
NOTE: It is preferred to use an OBD-II cable for a quick and clean installation

RF cables

CAB-L240-10-SM-TM

SMA(m)-straight to TNC(m)-straight, LMR-240-DB, 10 ft.

CAB-L240-15-SM-TM

SMA(m)-straight to TNC(m)-straight, LMR-240-DB, 15 ft.

CAB-L240-20-SM-TM

SMA(m)-straight to TNC(m)-straight, LMR-240-DB, 20 ft.

LTE-AE-MAG-SMA

Magnetic SMA antenna stand, SMA(f)-straight to TNC(f)-straight, LMR-195 plenum rated, 1 ft.

CAB-L240-10-SM-NM

SMA(m)-straight to N(m)-straight, LMR-240-FRDB, 10 ft.

CAB-L-10-RSP-RTP

RP-SMA(male) to RP-SMA(female), 10 ft.

CAB-L195-10-SM-SF

SMA(m) to SMA(f), LMR-195, 10 ft.

CAB-L240-20-SM-SF

SMA(m) to SMA(f), LMR-240, 20 ft.

CAB-L400-20-N-N

N(m)-straight to N(m)-right angle, LMR-400-DB, 20 ft.

RF adapters

LTE-ADPT-SM-TF

SMA(m)-straight to TNC(f)-straight adapter

AIR-ACC370-NF-NF

N(f)-straight to N(f)-straight adapter

Ethernet cable

CAB-ETH-S-RJ45

Yellow Cable for Ethernet, Straight through,RJ-45,15 feet

Console cable

CAB-USB-UB

USB Type A to USB Micro-B (2m)

Digital I/O cable

CAB-IO-MF6

Mating connector for Alarm-In / Digital I/O / Ignition Sense

Lighting arrestors

ACC-LA-G-SM-SF

SMA(m) to SMA(f)- straight, GDT, DC to 6 GHz

CGR-LA-NF-NF

N(f)-straight to N(f)-straight, GDT, DC to 6 GHz

CGR-LA-NM-NF

N(f)-straight to N(m)-straight, GDT, DC to 6 GHz

4G-ACC-OUT-LA

TNC(f)-straight to TNC(m)-straight, HPF, 698 to 2700 MHz (does not support GNSS)

ACC-LA-G-TM-TF

TNC(f)-straight to TNC(m)-straight, GDT, DC to 6 GHz

Ordering the IR1800 bundled with the Cisco IoT Operations Dashboard

Select the product ID as described in the table below.

Table 25.       IR1800 and Cisco IoT Operations Dashboard bundle

Bundle product ID

Description

IR1800-IOTOC

Bundled product ID for IoT Operations Dashboard subscription and IR1800 hardware

A detailed data sheet and ordering guide for the IR1800 with Cisco IoT Operations Dashboard can be found at Cisco IoT Operations Dashboard Datasheet, Cisco IoT Operations Dashboard Ordering Guide.

Warranty information

The Catalyst IR1800 Series comes with a Cisco 5-year limited hardware warranty. Adding a contract for a technical service offering, such as Cisco Smart Net Total Care® Service, provides benefits not available with the warranty, including access to OS updates, Cisco.com online resources, and Cisco Technical Assistance Center (TAC) support services. The table below shows the available technical services.

Find more information about Cisco product warranties.

Learn more about Cisco Technical Services.

Table 26.          Technical services

Warranty services for the Catalyst IR1800

Cisco Smart Net Total Care Service

  Global access to the Cisco TAC 24 hours daily
  Unrestricted access to the extensive Cisco.com resources, communities, and tools
  Next-business-day (NBD), 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement and onsite parts replacement and installation available
  Ongoing operating system software updates within the licensed feature set
  Proactive diagnostics and real-time alerts on Cisco Smart Call Home-enabled devices

Cisco Smart Foundation Service

  NBD advance hardware replacement, as available
  Business-hours access to Small and Medium-Sized Business (SMB) Cisco TAC (access levels vary by region)
  Access to Cisco.com SMB knowledge base
  Online technical resources through the Cisco Smart Foundation portal
  OS software bug fixes and patches

Product sustainability

Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environmental Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report.

Reference links to information about key environmental sustainability topics (mentioned in the “Environmental Sustainability” section of the CSR Report) are provided in the following table:

Table 27.       Cisco environmental sustainability information

Sustainability topic

Reference

General

Information on product-material-content laws and regulations

Materials

Information on electronic waste laws and regulations, including our products, batteries and packaging

WEEE Compliance

Information on product takeback and reuse program

Cisco Takeback and Reuse Program

Sustainability inquiries

Contact: csr_inquiries@cisco.com

Environmental operating temperature range

Table 7. Environmental specifications

Power

Power input

Power consumption

Table 5. Power specifications

Material

Product packaging weight and materials

Contact: environment@cisco.com

Physical dimensions and weight

Table 4. Physical specifications

Cisco makes the packaging data available for informational purposes only. It may not reflect the most current legal developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice.

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.

For more information

Learn more about the Cisco Catalyst IR1800 Rugged Series Routers: https://www.cisco.com/go/IR1800

Learn more about the industrial routing portfolio: https://www.cisco.com/c/en/us/solutions/internet-of-things/iot-routers-and-gateways.html.

Document history

New or revised topic

Described in

Date

Added additional use cases for fixed deployments

Product overview

June 2023

Added M12 Connector Kit

Table 19

June 2023

Spare Licenses Ordering information

Table 24

June 2023

 

Learn more