The Cisco® CRS-1 Carrier Routing System is the industry's first carrier router offering continuous system operation, unprecedented service flexibility, and system longevity. The Cisco CRS-1 is powered by Cisco IOS® XR Software-a unique self-healing, distributed operating system. As part of a video-enabled IP Next-Generation Network (NGN), the Cisco CRS-1 Series delivers continuous, always-on operation that easily scales to support the massive bandwidth requirements of visual networking experiences such as high-definition IPTV and Cisco TelePresence. These services demand a platform that delivers predictable forwarding performance and efficient, intelligent, fabric-based multicast replication. The Cisco CRS-1 Series enables the Internet and NGNs to handle the approaching zettabyte era of carrier IP communications while protecting network investments for decades to come.
Product Overview
The Cisco CRS-1 Series 4-Port 10GE LAN/WAN-PHY Interface Module (Figure 1) provides four line-rate, IEEE 802.3-compliant 10 Gigabit Ethernet interfaces. Physical connections can be made using modular 10-Gbps Small Form-Factor Pluggable (XFP) pluggable optics.
This data sheet provides detailed product specifications for the Cisco CRS-1 Series 4-Port 10GE LAN/WAN-PHY Interface Module (4-10GBE-WL-XFP). For more information about the Cisco CRS Family or about other available interfaces, visit: http://www.cisco.com/go/crs.
Features and Benefits
● Four line-rate 10 Gigabit Ethernet full-duplex interfaces
● Per-port flexibility for optical reach-selected using the appropriate XFP pluggable optical modules
● Compatibility with all Cisco CRS Series chassis
● Support for OIR (online insertion and removal) without the need to power down the chassis
● Simple configuration, monitoring, and maintenance
Product Specifications
Table 1 gives specifications for the Cisco CRS-1 4-Port 10GE LAN/WAN-PHY Interface Module.
Table 1. Product Specifications
Approvals and Compliance
Table 2 gives standards compliance information for the Cisco CRS-1 4-Port 10GE LAN/WAN-PHY Interface Module.
Table 2. Compliance and Agency Approvals
Feature |
Description |
Safety standards |
● UL/CSA/IEC/EN 60950-1
● AS/NZS 60950.1
● IEC/EN 60825 Laser Safety
● FDA-Code of Federal Regulations Laser Safety
|
EMI |
● FCC Class A
● ICES 003 Class A
● AS/NZS CISPR 22 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● IEC/EN 61000-3-2: Power Line Harmonics
● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
|
Immunity (basic standards) |
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
● IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM)
● IEC/EN-61000-4-5: Signal Ports (1 kV)
● IEC/EN-61000-4-5: Surge DC Port (1 kV)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10 Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations
|
ETSI and EN |
● EN300 386: Telecommunications Network Equipment (EMC)
● EN55022: Information Technology Equipment (Emissions)
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
Network Equipment Building Standards (NEBS) |
This product is designed to meet the following requirements (qualification in progress):
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
|
Additional Specifications
Table 3 gives additional specifications for the Cisco CRS-1 Series 4-Port 10 Gigabit Ethernet LAN/WAN-PHY Interface Module.
Table 3. Additional Specifications
Parameter |
Long Reach 1310 nm (LR/LR+) |
Extended Reach 1550 nm (ER+) |
Connector type |
LC |
LC |
Target distance |
10 km |
40 km |
Transmitter |
||
Power out (maximum) |
0.5 dBm |
4 dBm |
Power out (minimum) |
–8.2 dBm |
–4.7 dBm |
Receiver |
||
P (RMax) (overload) |
0.5 dBm |
–1.0 dBm |
P (RMin) (sensitivity) |
–14.4 dBm |
–15.8 dBm |
Optical link |
||
Fiber type |
G.652 (single-mode fiber [SMF]) |
G.652 (SMF) |
Optical path penalty |
3.2 dB |
4.1 dB |
Compliance |
IEEE 802.3ae 10GBASE-LR |
IEEE 802.3ae 10GBASE-ER |
Gigabit Ethernet XFP Optics |
Maximum Distance |
|
10 Gigabit Ethernet short-reach (SR) optics (multimode fiber) |
300 meters |
|
10 Gigabit Ethernet long-reach (LR) optics (single-mode fiber) |
6.2 miles (10 km) |
|
10 Gigabit Ethernet extended-reach (ER) optics (single-mode fiber) |
25 miles (40 km) |
|
10 Gigabit Ethernet long-haul (ZR) optics (single-mode fiber) |
50 miles (80 km) |
|
10 Gigabit DWDM fixed wavelength XFP (100-GHz ITU grid) |
50 miles (80 km) |
|
10 Gigabit DWDM Tunable XFP (50-GHz ITU grid)* |
50 miles (80 km) |
Ordering Information
To place an order, contact your local Cisco representative or visit the Cisco Ordering Home Page. Use the ordering information in Table 4.
Table 4. Ordering Information
Product Part Number |
Product Name |
4-10GBE-WL-XFP(=) |
Cisco CRS-1 4-port 10GbE LAN/WAN-PHY Interface Module |
XFP-10G-MM-SR(=) |
Cisco 10 Gigabit Ethernet SR (300 m) Optics |
XFP10GLR-192SR-L(=) |
Low Power multirate XFP supporting 10GBASE-LR and OC-192 SR |
XFP10GER-192IR-L(=) |
Low Power multirate XFP supporting 10GBASE-ER and OC-192 IR |
XFP-10GZR-OC192LR(=) |
Cisco 10 Gigabit Ethernet ZR (80 km) Optics |
DWDM-XFP-xx.xx(=) |
Cisco 10 Gigabit DWDM (80 km) Optics |
Cisco Services
Cisco Services make networks, applications, and the people who use them work better together.
Today, the network is a strategic platform in a world that demands better integration among people, information, and ideas. The network works better when services, together with products, create solutions aligned with business needs and opportunities.
The Cisco Lifecycle Services approach to services defines the requisite activities at each phase of the network lifecycle to help ensure service excellence. With a collaborative delivery methodology that joins the forces of Cisco, our skilled network of partners, and our customers, we achieve the best results.
For More Information
For more information about the Cisco CRS-1 Series 4-Port 10GE LAN/WAN-PHY Interface Module, contact your local Cisco representative or visit: http://www.cisco.com/go/crs.