Cisco ISR and ISR G2 xDSL Data Sheet
Available Languages
If your company plans to deploy broadband-based services with the Cisco® Integrated Services Routers (ISRs) and Integrated Services Routers Generation 2 (ISR G2) with integrated xDSL technologies, this document can help you avoid potential problems and help you identify the right customer premises equipment (CPE) and firmware version for your deployment.
DSL Chipset-to-ISR Model Mapping
The features and interoperability depend on the chipset used in the CPE. To simplify the documentation, refer to Table 1, which lists which DSL chipsets are used in which series of CPE. The supported types of DSL (very-high-bit-rate DSL [VDSL] and/or asymmetric DSL [ADSL]) are cross references with the annex that they can run on
(A, B, M, or J).
Table 1. V/ADSLDSL Chipsets in CPE
| ISR Model Part Number |
Chipset Vendor |
Chipset |
V/A DSL Annex Support |
Layer 2 Frame Mode |
||||
| A |
B |
M |
J |
PTM |
ATM |
|||
| CISCO867 |
ST Micro |
20190P |
A |
|
|
|
|
X |
| CISCO867VAE |
Broadcom |
6368 |
V/A |
|
|
|
X |
X |
| C867VAE-W |
Broadcom |
63268 |
V/A |
|
|
|
X |
X |
| CISCO887 |
ST Micro |
20190P |
A |
|
|
|
|
X |
| CISCO887V |
Broadcom |
6368 |
V |
|
|
|
X |
X |
| CISCO887VA |
Broadcom |
6368 |
V/A |
|
|
|
X |
X |
| C897VA |
Broadcom |
6368 |
V/A |
|
|
|
X |
X |
| EHWIC-VA-DSL-A |
Broadcom |
6368 |
V/A |
|
|
|
X |
X |
| CISCO866VAE |
Broadcom |
6368 |
|
V/A |
|
|
X |
X |
| CISCO886 |
ST Micro |
20190P |
|
A |
|
|
|
X |
| CISCO886VA |
Broadcom |
6368 |
|
V/A |
|
|
X |
X |
| C896VA |
Broadcom |
6368 |
|
V/A |
|
|
X |
X |
| EHWIC-VA-DSL-B |
Broadcom |
6368 |
|
V/A |
|
|
X |
X |
| CISCO887M |
ST Micro |
20190P |
|
|
A |
|
|
X |
| CISCO887VAM |
Broadcom |
6368 |
|
|
V/A |
|
X |
X |
| C897VAM |
Broadcom |
6368 |
|
|
V/A |
|
X |
X |
| EHWIC-VA-DSL-M |
Broadcom |
6368 |
|
|
V/A |
|
X |
X |
| CISCO886VA-J |
Broadcom |
6368 |
|
|
|
V/A |
X |
X |
| C886VAJ |
Broadcom |
6368 |
|
|
|
V/A |
X |
X |
Table 2. G.SHDSL Chipsets in CPE
| ISR Model Part Number |
Chipset Vendor |
No. of Pairs |
Chipset |
G.SHDSL Annex Support |
Layer 2 Frame Mode |
||||
| A |
B |
F |
G |
EFM |
ATM |
||||
| CISCO888 |
Conexant (Formerly Globespan) |
2 |
Orion |
X |
X |
X |
X |
|
X |
| HWIC-2SHDSL |
Lantiq (Formerly Infineon) |
2 |
SDFE-2 |
X |
X |
X |
X |
|
X |
| HWIC-4SHDSL |
Lantiq (Formerly Infineon) |
4 |
SDFE-4 |
X |
X |
X |
X |
|
X |
| CISCO888E |
Conexant |
4 |
CX98124 (Orion Plus) |
X |
X |
X |
X |
X |
|
| HWIC-4SHDSL-E |
Conexant |
4 |
CX98124 (Orion Plus) |
X |
X |
X |
X |
X |
|
| C898EA |
Lantiq |
4 |
SOCRATES-4e |
X |
X |
X |
X |
X |
X |
| C888EA |
Lantiq |
4 |
SOCRATES-4e |
X |
X |
X |
X |
X |
X |
| EHWIC-4SHDSL-EA |
Lantiq |
4 |
SOCRATES-4e |
X |
X |
X |
X |
X |
X |
| C888 |
Lantiq |
4 |
SOCRATES-4e |
X |
X |
X |
X |
X |
X |
Tables 3 through 8 give information about features for the Cisco ISR and ISR G2 routers with integrated xDSL technologies.
Table 3. Features per Chipset and Firmware - G.HS
| Standard |
Feature Name |
Broadcom |
ST Micro |
|
| 6368 |
63268 |
20190P |
||
| G.994.1 |
Handshake procedures for DSL transceivers |
Y |
Y |
Y |
Table 4. Features per Chipset and Firmware - ADSL
| Standard |
Feature Name |
Broadcom |
ST Micro |
|
| 6368 |
63268 |
20190P |
||
| ANSI T1.413-1995 |
ADSL - ANSI (a.k.a. ADSL - Metallic Interface) |
Every FW |
Every FW |
Y |
| ANSI T1.413-1998 |
ADSL - ANSI (a.k.a. ADSL - Metallic Interface Issue 2) |
Every FW |
Every FW |
Y |
| ITU-T G.992.1 |
ADSL - G.dmt |
Every FW |
Every FW |
Y |
| ITU-T G.992.1 |
ADSL - G.dmt with bit swaps |
Every FW |
Every FW |
Y |
| ITU-T G.992.2 |
G.lite |
Every FW |
Every FW |
N |
| ITU-T G.992.3 |
ADSL2 |
Every FW |
Every FW |
Y |
| ITU-T G.998.4 on G.992.3 |
ADSL2 with G.INP (Improved Impulse Noise Protection) |
Every FW |
Every FW |
Y |
| ITU-T G.992.5 |
ADSL2+ |
Every FW |
Every FW |
Y |
| ITU-T G.992.5 |
ADSL2+ with SRA |
Every FW |
Every FW |
N |
| ITU-T G.998.4 on G.992.5 |
ADSL2+ with G.INP (Improved Impulse Noise Protection) |
Every FW |
Every FW |
Y |
| Broadcom Proprietary |
ADSL2+ with PhyR (a.k.a. L1 retransmission, PMS-TC) |
Every FW |
Every FW |
N |
| Broadcom Proprietary |
ADSL2+ with NITRO - ATM header Compression |
Every FW |
Every FW |
N |
| Alcatel-Lucient Proprietary |
“SmartDSL” a.k.a. Artificial Noise & Virtual Noise (ANVN) |
Every FW |
Every FW |
N |
|
|
TCM (Trellis Coded Modulation) |
Every FW |
Every FW |
Y |
|
|
TCM (Trellis Coded Modulation) can be enabled/disabled |
Every FW |
Every FW |
Y |
|
|
Autonomous loop length estimation |
|
|
Y |
| TR-202 |
ADSL2/ADSL2plus Low-Power Mode L2 & L3 |
Every FW |
Every FW |
Y |
| ITU-T G.992.1, .3, and .5 |
ADSL(all) - loss-of-power (LPR) detection (a.k.a. “Dying Gasp”) |
Every FW |
Every FW |
N |
Table 5. Features per Chipset and Firmware - VDSL*
| Standard |
Feature Name |
Broadcom |
ST Micro |
|
| 6368 |
63268 |
20190P |
||
| G.993.1 |
VDSL |
Every FW |
Every FW |
N |
| G.993.1 |
VDSL - Bit swapping |
Every FW |
Every FW |
N |
| G.993.1 |
VDSL - Upstream Power Back Off (UPBO) (Reference PSD UPBO) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Profile 8a/b/c/d, 12a/b, and 17a |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Support of Upstream Band 0 (US0) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Bit Swapping |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Seamless Rate Adaption (SRA) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Save Our Showtime (SOS) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Robust Overhead Channel (ROC) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Upstream Power Back Off (UPBO) (Reference PSD UPBO) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Equalized FEXT UPBO |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Impulse Noise Measurement (INM) |
Every FW |
Every FW |
N |
| G.993.2 |
VDSL2 - Alternative Electrical Length Estimation Method (ELE-M1) |
Every FW |
Every FW |
N |
| G.993.2 Annex N |
ITU-T G.993.5-friendly ITU-T G.993.2 operation in the downstream direction |
38H |
38H |
N |
| G.993.2 Annex O |
Full ITU-T G.993.5-friendly ITU-T G.993.2 operation |
38H |
38H |
N |
| G.993.5 on G.993.2 |
VDSL2 - Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers |
38H |
38H |
N |
| G.993.2 & .3 |
VDSL (all) - loss-of-power (LPR) detection (a.k.a. “Dying Gasp”) |
Every FW |
Every FW |
N |
| ITU G.998.4 on G.993.2 |
VDSL2 with G.INP (Improved Impulse Noise Protection) |
Every FW |
Every FW |
N |
| Alcatel-Lucient Proprietary |
“SmartDSL” a.k.a. Artificial Noise & Virtual Noise (ANVN) |
Every FW |
Every FW |
N |
|
|
TCM (Trellis Coded Modulation) |
Every FW |
Every FW |
N |
|
|
TCM (Trellis Coded Modulation) can be enabled/disabled |
Every FW |
Every FW |
N |
| TTCM - Turbo Trellis Coded Modulation |
|
|
N |
|
|
|
Autonomous loop length estimation |
|
|
N |
| Broadcom Proprietary |
VDSL2 with PhyR (a.k.a. L1 retransmission, PMS-TC) |
Every FW |
Every FW |
N |
and later.
Table 6. Features per Chipset and Firmware - G.SHDSL
| Standard |
Feature Name |
Conexant |
Conexant |
Lantiq |
Lantiq |
Lantiq |
| CX98124 |
Orion |
SDFE-2 |
SDFE-4 |
SOCRATES-4e |
||
| ITU-T G.991.1 |
High bit rate DSL (HDSL) |
Y |
Y |
Y |
Y |
Y |
| ITU-T G.991.2 |
Single-pair high-speed DSL (SHDSL) transceivers |
Y |
Y |
Y |
Y |
Y |
| ITU-T G.991.2 Annex A |
Regional requirements - Region 1 (North America) |
Y |
Y |
Y |
Y |
Y |
| ITU-T G.991.2 Annex B |
Regional requirements - Region 2 (Europe) |
Y |
Y |
Y |
Y |
Y |
| ITU-T G.991.2 Annex E |
SHDSL - Dynamic Rate Repartitioning (DRR) Application-specific TPS-TC framing |
N |
N |
N |
N |
N |
| ITU-T G.991.2 Annex F |
Region 1 requirements for payload data rates up to 5696 kbps (G.SHDSL bis) |
Y |
Y |
Y |
Y |
Y |
| ITU-T G.991.2 Annex G |
Region 2 requirements for payload data rates up to 5696 kbps (G.SHDSL bis) |
Y |
Y |
Y |
Y |
Y |
| ITU G. 998.2 |
Ethernet-based multi-pair bonding - 2 pair |
Y |
N |
N |
N |
Y |
| ITU G. 998.2 |
Ethernet-based multi-pair bonding - 4 pair |
Y |
N |
N |
N |
Y |
| ITU-T G.991.2 |
tcpam16(SHDSL)/tcpam32 (SHDSL.bis) |
Y |
Y |
Y |
Y |
Y |
| Lantiq Proprietary |
TCPAM 64 and TCPAM128 |
N |
N |
N |
N |
Y |
|
|
PATH EFM/PTM - |
Y |
N |
N |
N |
Y |
| ATM forum IMA Version 1.1 |
IMA |
N |
Y |
N |
Y |
Y* |
| M-Pair bonding |
Physical Layer bonding in ATM |
N |
Y |
N |
Y |
Y |
| Cisco Proprietary |
ATM auto |
N |
N |
Y |
Y |
Y |
| Cisco Proprietary |
EFM auto |
N |
N |
N |
N |
Y |
DSLAMs can manage CPEs with the Embedded Operations Channel (EOC), and all CPEs present the information presented in Table 7.
Table 7. DSLAM Management Features
| Information |
Chipset |
||||||
| G.SHDSL |
V/ADSL |
||||||
| Conexant |
Lantiq |
Broadcom |
ST Micro |
||||
| CX98124 |
Orion |
Socrates-4e |
SDFE-2/4 |
6368 |
63268 |
20190P |
|
| Modem name |
Y |
Y |
Y |
Y |
|
|
Y |
| Vendor name |
Y |
Y |
Y |
Y |
|
|
Y |
| Serial number |
Y |
Y |
Y |
Y |
|
|
Y |
| Version number |
Y |
Y |
Y |
Y |
|
|
Y |
| Self-test result |
- |
- |
- |
- |
|
|
Y |
| DSL annex |
Y |
Y |
Y |
Y |
|
|
Y |
| Firmware |
Y |
Y |
Y |
Y |
|
|
Y |
| Line driver |
No |
No |
No |
No |
|
|
Y |
During operation the DSL service can be monitored with DELT, and the CPE presents the information given in Table 8.
Table 8. Information from CPE
| Information |
Chipset |
|||||||
| G.SHDSL |
V/ADSL |
|||||||
| Conexant |
Lantiq |
Broadcom |
ST Micro |
|||||
| CX98124 |
Orion |
SDFE-2/4 |
SOCRATES-4e |
6368 |
63268 |
20190P |
||
| Noise margin |
Y |
N |
Y |
Y |
|
|
Y |
|
| Error seconds |
Y |
Y |
N |
Y |
|
|
Y |
|
| Severely errored seconds |
Y |
Y |
N |
Y |
|
|
Y |
|
| Unavailable seconds |
Y |
Y |
N |
Y |
|
|
Y |
|
| Re-Initializations |
N |
N |
N |
N |
|
|
Y |
|
| Output power responsePower back-off level for SHDSL attenuation |
N |
N |
N |
Y |
- (for V/ADSL) |
|||
| Maximum attainable bit rate (not applicable for SHDSL) |
- (for G.SHDSL) |
|
|
Y |
||||
| Current INP value (not applicable for SHDSL) |
|
|
Y |
|||||
| Interleaving delay (not applicable for SHDSL) |
|
|
Y |
|||||
| Relative occupation capacity (not applicable for SHDSL) |
|
|
Y |
|||||
| Code violation (not applicable for SHDSL) |
|
|
N |
|||||
| Forward error correction (not applicable for SHDSL) |
|
|
Y |
|||||
| Carrier data (not applicable for SHDSL)
● Power spectral density
● Carrier load
● Signal to noise ratio (per carrier)
● Hlog (per carrier)
● Quiet line noise (per carrier)
● Gain (per carrier)
|
|
|
Y |
|||||
Firmware Naming Convention
The firmware version is in the format A2pv6C038k1, where the last 3 to 4 characters, in this example 38K1, identify the version. The Cisco Download Center shows the firmware file name equal to vdsl.bin-<FW -Version>, that is, vdsl.bin-A2pv6C035l until Version 35L. After that version the file name contains more information and is of the following format: VA_A_<Annex-A_FW>_B_<Annex-B_FW>_<Driver>.bin; that is, VA_A_38k1_B_38h_24g1.bin.
How to Determine Which Firmware Version Is Running
For V/A DSL routers, use the following command:
Router#show controllers VDSL 0 | include Modem FW
Modem FW Version: 120306_1254-4.02L.03.A2pv6C035j.d23j.
For G.SHDSL routers, use the following command:
Router#show controllers SHDSL | include IDC Firmware
IDC Firmware version: 1.7.5.0.
Table 9 lists the firmware embedded in different Cisco IOS Software releases.
Table 9. Firmware Embedded in Cisco IOS Software Releases
| Cisco IOS Software Release |
Embedded Firmware |
||||||
| G.SHDSL |
V/ADSL |
||||||
| Conexant |
Lantiq |
Broadcom |
ST Micro |
||||
| Orion |
CX98124 |
SOCRATES-4e |
SDFE-2/4 |
6368 |
63268 |
20190P |
|
| 15.1.1T |
R4.2.1 |
T-T5: G100 |
- |
REL.3.4.0 |
|
- |
|
| 15.1.2T |
R4.2.1 |
T0a-T2a: G100 T3: G115 T4: G115.1.7 T5: G115.1.10 |
- |
REL.3.4.0 |
|
|
|
| 15.1.3T |
R4.2.1 |
T: G100 T1: G115 T2: G115.1.7 T3-T4: G115.1.10 |
- |
REL.3.4.0 |
|
|
|
| 15.1.4M |
R4.2.1 |
M: G115 M1: G115.1.7 M2-M5: G115.1.10 M6-M9: G115.1.1 |
- |
REL.3.4.0 |
|
|
|
|
|
|
|
|
|
|
|
|
| 15.2.1T |
R4.3.1 |
T-T1: G115.1.7 T2-T4: G115.1.10 |
- |
REL.3.4.0 |
|
- |
|
| 15.2.2T |
R4.3.1 |
T-T4: G115.1.10 |
T-T4: V1.7.2.0 |
REL.3.4.0 |
32b.d23f |
- |
|
| 15.2.3T |
R4.3.1 |
T-T4: G115.1.10 |
T-T4: V1.7.2.0 |
REL.3.4.0 |
|
- |
|
| 15.2.4M |
R4.3.1 |
M-M1: G115.1.10 M2-M7: G115.1.1 |
M1-2:V1.7.2.0 M3-7: V1.7.2.6 |
REL.3.4.0 |
35j.d23j |
|
|
|
|
|
|
|
|
|
|
|
| 15.3.1T |
R4.3.1 |
T-T4: G115.1.10 |
T: V1.7.2.0 T1 - T4: V1.7.2.6 |
REL.3.4.0 |
|
- |
|
| 15.3.2T |
R4.3.1 |
T-T4: G115.1.1 |
T-T4: V1.7.5.0 |
NA |
|
- |
|
| 15.3.3M |
R4.3.1 |
M-M4: G115.1.1 |
M-M4: V1.7.5.0 |
NA |
|
38h/37f2.d24g1 |
|
|
|
|
|
|
|
|
|
|
| 15.4.1T |
R4.3.1 |
T-T2: G115.1.1 |
T-T2: V1.7.5.0 |
NA |
|
|
|
| 15.4.2T |
R4.3.1 |
T-T1: G115.1.1 |
T-T1: V1.7.5.0 |
NA |
|
|
|
| 15.4.3M |
R4.3.1 |
M: G115.1.1 |
M: V1.7.5.0 |
NA |
|
|
|
How to Upgrade DSL Firmware
For G.SHDSL platforms (Cisco 888 and Cisco 898 SHDSL), xDSL firmware is not yet available as an independent image. For VDSL and ADSL platforms (Cisco 860VAE, 880, 880V, 880VA, and 890VA), firmware can be independently upgraded. To do so, go to the download center:
http://www.cisco.com/cisco/software/navigator.html?a=a&i=rch.
● Select Routers.
● Select Branch Routers.
● Select Cisco 800 Series Routers.
● Select the model applicable to you.
● Select Asymmetric Digital Subscriber Line (ADSL) Firmware or Very High Bitrate DSL (VDSL) Firmware.
After you download the firmware file, copy it on Flash and configure the router to use the new firmware:
Router#configure terminal
Router(config)#controller VDSL 0
Router(config-controller)#firmware filename flash:VA_A_38k1_B_38h_24g1.bin
A reload is required to activate the new firmware.
You should afterward verify that the upgrade was successful:
Before the upgrade:
show controllers VDSL 0
<snip>
Firmware Source File Name (version)
-------- ------ -------------------
VDSL embedded VDSL_LINUX_DEV_01212008 (1)
Modem FW Version: 120306_1254-4.02L.03.A2pv6C035j.d23j
Modem PHY Version: A2pv6C035j.d23j
<snip>
After upgrade:
show controllers VDSL 0
<snip>
Firmware Source File Name (version)
-------- ------ -------------------
VDSL user config flash:VA_A_38k1_B_38h_24g1.bin (10)
Modem FW Version: 130208_1314-4.02L.03.A2pv6C038k1.d24g1
Modem PHY Version: A2pv6C038k1.d24g1
<snip>
CPE and DSLAM Interoperability
The Cisco ISR G2 product portfolio supports a diversity of DSL technologies, including very-high-bit-rate DSL 2 (VDSL2), asymmetric DSL (ADSL), ADSL2/2+, multimode VDSL2/ADSL2+, and G.SHDSL. The Cisco ISR G2 CPE described in Tables 9 through 23 has been tested at the Cisco DSL Interoperability Test Lab in San Jose, California, to help ensure interoperability with the DSL access multiplexers (DSLAMs) also specified in these tables.
Multimode VDSL2 and ADSL2+ Platforms and Modules
Table 10. VDSL2/ADSL2+ over ISDN
| CPE Part Numbers Tested |
Chipset |
Firmware |
Cisco IOS Software Release |
| C896VA |
Broadcom 6368 |
B2pv6C035j.d23j |
15.2(4)M or later |
| CISCO866VAE |
Broadcom 6368 |
B2pv6C032b.d23i |
15.1(4)M or later |
| Compatible VDSL2 DSLAMs |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| ZTE 9806 |
Broadcom |
VSTDC |
V1.2.0P4T2 |
| Alcatel ISAM 7302 |
Ikanos |
NVLT-D |
L6GPAA40 and 126/L6GPA34.412 |
| Huawei 5603 |
Broadcom |
H565VDEA |
320(2007-12-7)/VE_9_3_6 |
| Compatible ADSL2+ DSLAM |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel ASAM7300 |
Broadcom |
ABLT-F |
L7D6AA47.174 |
| ECI Hi-Focus 480 |
Infineon |
ATU- ATUC-32 |
A4_9.00.48 |
| Ericsson ECN320 |
Broadcom |
EDN312xi |
132 8112 R2L01 and |
| Siemens HiX 5300 |
Infineon |
SUADSL:64IXA |
542 |
Table 11. VDSL2/ADSL2+ over Basic Telephone Service (Annex A)
| CPE Part Numbers Tested |
Chipset |
Firmware |
Cisco IOS Software Release |
| C897VA |
Broadcom 6368 |
A2pv6C035j.d23j |
15.2(4)M or later |
| CISCO867VAE |
Broadcom 6368 |
A2pv6C032b.d23i |
15.1(4)M or later |
| CISCO887VA |
Broadcom 6368 |
A2pv6C030h.d22k |
15.1(2)T or later |
| Compatible VDSL2 DSLAMs |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| ZTE 9806 |
Broadcom |
VSTDC |
V1.2.0P4T2 |
| Alcatel ISAM 7302 |
Ikanos |
NVLT-D |
L6GPAA40.126/L6GPA34.412 |
| Alcatel ISAM 7302 |
Conexant |
NVLT-C |
L6GPAA40 and 126/L6GPA34.412 |
| Huawei 5603 |
Broadcom |
H565VDEA |
320(2007-12-7)/VE_9_3_6 |
| Compatible ADSL2+ DSLAMs |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| Alcatel ISAM 7302 |
Broadcom |
NALT-C |
3FE27289AABD |
| Ericsson EDA2.1 |
Broadcom |
EDN312xp |
132 8112 R2L01 and |
| ECI Hi-Focus 480 |
Infineon |
ATUC (ATUC-32) |
A4_9.00.60 |
| Fujitsu FDX Hub 1000 |
Infineon |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
| Fujitsu FDX Hub 1000 |
Texas Instruments |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
| Huawei MA5600 |
Conexant |
H563ADGE VER A |
322(2007-9-29) |
| Lucent Stinger |
Conexant |
ep-hs-gs-adsl2plus-card |
E.67.15.1 |
| Nokia D500 |
Globespan |
ADSL2+af |
3,5141 and 21:21:47 |
Table 12. VDSL2/ADSL2+ over Basic Telephone Service (Annex M)
| CPE Part Numbers Tested |
Chipset |
Firmware |
Cisco IOS Software Release |
| CISCO887VA-M |
Broadcom 6368 |
A2pv6C032b.d22k |
15.1(2)T or later |
| C887VAM |
Broadcom 6368 |
|
15.3(3)M2 or later |
| C897VAM |
Broadcom 6368 |
|
15.3(3)M2 or later |
| Compatible VDSL2 DSLAMs |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel ISAM 7302 |
Ikanos |
NVLT-D |
L6GPAA40 and 126/L6GPA34.412 |
| Huawei 5603 |
Broadcom |
H565VDEA |
320(2007-12-7)/VE_9_3_6 |
| Compatible ADSL2+ DSLAMs |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| Fujitsu FDX Hub 1000 |
Infineon |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
| Lucent Stinger |
Conexant |
stngr-72-gs-adsl-card |
E.67.15.1 |
| Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| Lucent Stinger |
Conexant |
stngr-72-gs-adsl-card |
E.67.15.1 |
| Fujitsu FDX Hub 1000 |
Infineon |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
| Fujitsu FDX Hub 1000 |
Texas Instrument |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
Older VDSL2 Platforms and Modules
Table 13. Older Cisco 887V VDSL2 Router and HWIC-1VDSL Modules
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Software/Firmware |
| CISCO887V and HWIC-1VDSL |
Broadcom |
AvC011b.d21j1; Cisco IOS Software Release 12.4(24)T or later |
ZTE 9806 |
Broadcom |
VSTDC |
V1.2.0P4T2 |
| Alcatel ISAM 7302 |
Ikanos |
NVLT-D |
L6GPAA40 and 126/L6GPA34.412 |
|||
| Huawei 5603 |
Broadcom |
H565VDEA |
320(2007-12-7)/VE_9_3_6 |
|||
ADSL and ADSL2 and L2+ Platforms and Modules
Table 14. Older Cisco 886 ADSL-Over-ISDN Routers (Annex B)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO886 |
ST Micro |
4.0.15; Cisco IOS Software Release 15.0(1)M or later |
Alcatel ASAM7300 |
Broadcom |
ABLT-F |
L7D6AA47.174 |
| ECI Hi-Focus 480 |
Infineon |
ATU-32C |
A4_9.00.48 |
|||
| Ericsson ECN320 |
Broadcom |
EDN312xi |
132 8112 R2L01 and |
|||
| Siemens HiX 5300 |
Infineon |
SUADSL:64IXA |
542 |
|||
Table 15. Older Cisco 867 and Cisco 887 ADSL-Over-Basic Telephone Service Routers (Annex A)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO887 |
ST Micro |
4.0.15; Cisco IOS Software Release 15.0(1)M or later |
Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| Alcatel ISAM 7302 |
Broadcom |
NALT-C |
3FE27289AABD |
|||
| Alcatel ISAM 7330 |
Broadcom |
EBLT-C |
3FE21541AAAB |
|||
| Ericsson EDA2.1 |
Broadcom |
EDN312xp |
132 8112 R2L01 and |
|||
| ECI Hi-Focus 480 |
Infineon |
ATU-C (ATUC-32) |
A4_9.00.60 |
|||
| Fujitsu FDX Hub 1000 |
Infineon |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
|||
| Fujitsu FDX Hub 1000 |
Texas Instruments |
ADSL IV-LCSS-FS |
5.2.55.554.0 |
|||
| Huawei MA5600 |
Conexant |
H563ADGE VER A |
322(2007-9-29) |
|||
| Lucent Stinger |
Conexant |
ep-hs-gs-adsl2plus-card |
E.67.15.1 |
|||
| Nokia D500 |
Globespan |
ADSL2+af |
3,5141 and 21:21:47 May 23, 2007 |
|||
Table 16. Older Cisco 887M ADSL-over-Basic Telephone Service Routers (Annex M)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO887M |
ST Micro |
4.0.15; Cisco IOS Software Release 15.0(1)M or later |
Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| Ericsson EDA2.1 |
Broadcom |
EDN312xp |
132 8112 R2L01, |
|||
| ECI Hi-Focus 480 |
Infineon |
ATU-C |
A4_9.00.60 |
|||
| Huawei MA 5600 |
Conexant |
ADGE |
322(2007-9-29) |
|||
| Lucent Stinger |
Conexant |
stngr-72-gs-adsl-card |
E.67.15.1 |
|||
Table 17. Older Cisco 876 and 1802 ADSL Routers and HWIC-1ADSLI and HWIC-ADSLI-B/ST over ISDN
(ADSLoISDN) (Annex B)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO876, CISCO1802, |
ST Micro 20190 |
4.0.15; Cisco IOS Software Release 12.4(22)T |
Alcatel ASAM7300 |
Broadcom |
ABLT-F |
L7D6AA47.174 |
| ECI Hi-Focus 480 |
Infineon |
ATU-C 32 |
A4_9.00.48 |
|||
| Ericsson EDA 2.1 |
Broadcom |
EDN312xi |
CXC 132 8112 R2L01 |
|||
| Siemens HiX 5300 |
Infineon |
SUADSL:64IXA |
542 |
|||
Table 18. Older Cisco 857, 877, and 1801 Routers and HWIC-1ADSL/HWIC-ADSL-B/ST ADSL-over-Basic
Telephone Service Modules (Annex A)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO 857, |
ST Micro 20190 |
4.0.15; Cisco IOS Software Release 12.4(22)T |
Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| ECI Hi-Focus 480 |
Infineon |
ATU-C 32 |
A4_9.00.48 |
|||
| Ericsson EDA 2.1 |
Broadcom |
EDN312xp |
CXC 132 8112 R2L01 |
|||
| Huawei MA5600 |
Globespan |
H563ADGE VER A |
MA5600V300R003 |
|||
| Lucent Stinger |
Conexant |
ep-72-hs-gs-adsl2plus |
E.67.1.36 |
|||
| Nokia D500* |
Globespan |
ADSL2+af |
3,5141,21:21:47 |
|||
| Siemens HiX 5300 |
Infineon |
SUADSL:64IXA |
542 |
|||
Table 19. Older Cisco 877M ADSL-over-Basic Telephone Service Routers and HWIC-1ADSL-M (Annex M)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO877M and HWIC-1ADSL-M |
ST Micro |
4.0.15; Cisco IOS Software Release 12.4(22)YB3 or later |
Alcatel ASAM7300 |
Broadcom |
ABLT-D |
L7D6AA47.174 |
| Ericsson EDA2.1 |
Broadcom |
EDN312xp |
132 8112 R2L01 |
|||
| ECI Hi-Focus 480 |
Infineon |
ATU-C |
A4_9.00.60 |
|||
| Lucent Stinger |
Conexant |
stngr-72-gs-adsl-card |
E.67.15.1 |
|||
Table 20. Older Cisco 877M ADSL-over-Basic Telephone Service Routers (Annex M UK Mask)
| CPE |
DSLAM |
|||||
| CPE Part Number |
Chipset |
Firmware; Cisco IOS Software Release |
DSLAM Model |
Chipset |
Line Card |
Firmware |
| CISCO877M |
ST Micro |
4.0.15; Cisco IOS Software Release 12.4(22)YB3 or later |
Huawei MA 5300 |
Conexant |
ADGE |
322(2007-9-29) |
G.SHDSL Platforms and Modules
Table 21. EFM/ATM Multimode G.SHDSL Platforms
| CPE Part Numbers Tested |
Chipset |
Firmware |
Cisco IOS Software Release |
| C888EA-K9 |
Infineon (bought by Lantiq) |
IDC Firmware version: 1.7.2.0 |
15.2(4)M or later |
| C898EA-K9 |
Infineon (bought by Lantiq) |
IDC Firmware version: 1.7.2.0 |
15.2(4)M or later |
| EHWIC-4SHDSL-EA |
Infineon (bought by Lantiq) |
IDC Firmware version: 1.7.2.0 |
15.2(4)M or later |
| Mode |
DSLAM |
||||
| DSLAM Model |
Controller Card |
Line Card |
Firmware |
||
| ATM |
Alcatel ASAM 7300 |
SANT-F |
SMLT-A |
LDP7AA46.030 |
|
| SMLT-C |
LPR9AA46.029 |
||||
| Huawei MA5603 |
SCUB |
SHEB |
1.4.13 |
||
| Lucent Stinger |
|
LIM-SL-72 |
9.7.4 e21 |
||
| LIM-SL-48 |
9.7.4 e21 |
||||
| ECI 480 |
|
STUC-16A |
S3_8.10.16 |
||
| STUC-32A |
S3_8.10.16 |
||||
| Alcatel ISAM_7330_FTTN |
NANT-A |
NSLT-A |
1.4.1 |
||
| SMLT-J |
1.2.42 |
||||
| EFM |
AlcatelISAM_7330_FTTN |
NANT-A |
NSLT-A |
1.4.1 |
|
| Huawei MA5603 |
SCUB |
SHEB |
1.4.13 |
||
| Huawei MA5600 |
|
SHEB |
1.4.18 |
||
| Hatteras HN4000 |
|
|
7.1.2 |
||
| Actelis ML698 |
|
|
SW: 7.10/35 |
||
Table 22. EFM G.SHDSL Platforms
| CPE Part Number |
Chipset |
Firmware |
Cisco IOS Software Release |
| CISCO888E |
Conexant |
G115 |
15.1(1)T or later |
| HWIC-4SHDSL-E |
Conexant |
G115 |
15.1(1)T or later |
| DSLAM |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel 7302 |
Infineon |
NSLT-A |
Feature Group 4.0 and firmware Version 1.3.13 |
| Huawei 5603 |
Infineon |
SHEB |
1.4.13 |
| Hatteras HN4000e |
Infineon |
HN4000e |
6.2.1 |
Table 23. Conexant-Based ATM G.SHDSL Platforms
| CPE Part Number |
Chipset |
Firmware |
Cisco IOS Software Release |
| CISCO878-K9 |
Conexant |
R4.3.1 |
15.0(1)M3 or later |
| CISCO888-K9 |
Conexant |
R4.3.1 |
15.0(1)M3 or later |
| WIC-1SHDSL-V3 |
Conexant |
R4.3.1 |
15.0(1)M3 or later |
| DSLAM |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel 7300 |
Globespan |
SMLT-A |
LDP7AA46.020 |
| Alcatel ISAM 7302 |
Infineon |
NSLT-A |
1.3.13/1.3.5 |
| Alcatel ISAM 7330 |
Infineon |
SMLT-J |
1.2.42 |
| ECI 480 |
Infineon |
STU-C 16 |
S3_8.10.16 |
| Huawei 5600 |
Globespan |
H561SHEA |
MA5600V300R003C03B028 (320(2007-9-29)) |
| Huawei 5600 |
Infineon |
SHEB |
H569 (336)SHEB |
| Lucent Stinger |
Globespan |
STGR-LIM-SL-72 |
9.7.4e21 (firmware R3.0.5) |
| stngr-48-shdsl-card |
R3.0.2 |
||
| Lucent AnyMedia |
Conexant |
LPS702 |
01.29.52.05 |
| Nokia D500 |
Globespan |
SHDSL24f |
3,5141,21:50:35 May 23 2007 |
| Siemens HiX 5300 |
Infineon |
SUSHDSL:32:PAM16 |
S50010-M1295-A101- |
Table 24. Infineon-Based ATM G.SHDSL Platforms
| CPE Part Number |
Chipset |
Firmware |
Cisco IOS Software Release |
| HWIC-2SHDSL |
Infineon |
1.6.1_002 |
15.0(1)M3 or later |
| HWIC-4SHDSL |
Infineon |
1.6.1_002 |
15.0(1)M3 or later |
| DSLAM |
|||
| DSLAM Model |
Chipset |
Line Card |
Firmware |
| Alcatel 7300 |
Globespan |
SMLT-A |
LDP7AA46.030 |
| Alcatel 7300 |
Globespan |
SMLT-C |
LPR9AA46.029 |
| Alcatel ISAM 7302 |
Infineon |
NSLT-A |
1.3.13/1.3.5 |
| Alcatel ISAM 7330 |
Infineon |
SMLT-J |
1.2.42 |
| ECI 480 |
Infineon |
STU-C 16 |
S3_8.10.16 |
| Lucent Stinger |
Globespan |
STGR-LIM-SL-72 |
9.7.4e21 (firmware R3.0.5) |
| Huawei 5600 |
Globespan |
H561SHEA |
MA5600V300R003C03B028 (320(2007-9-29)) |
| Huawei 5600 |
Infineon |
SHEB |
H569 (336)SHEB |
Table 25. Certified Service Providers
| Service Provider |
Certified 880VA SKU |
DSL Technology |
Firmware Version |
Modem Setting Requirements∗ |
| A1 Telekom Austria |
CISCO887VA-K9 |
VDSL2/ADSL Annex A |
A2pvC030h1.d22k |
CO5 |
| Bell Canada |
CISCO887VA-SEC-K9 |
ADSL/ADSL2/ADSL2+ Annex A |
A2pv6C032b.d23b |
- |
| BT 21CN |
CISCO887VA-K9 |
ADSL/ADSL2/ADSL2+ Annex A, Annex M |
A2pv6C035d.d23j |
UK feature |
| KPN |
CISCO887VA-K9 |
VDSL/ADSL Annex A |
A2pv6C035d.d23j |
CO5 |
| Orange Business |
CISCO887VA-K9 |
ADSL/ADSL2/ADSL2+ Annex A |
A2pv6C035j.d23j |
Hbi feature |
| Portugal Telecom |
CISCO887VA-M-K9 |
ADSL/ADSL2/ADSL2+ Annex M |
A2pv6C033.d23e |
- |
| Swisscom |
CISCO887VA-K9 |
VDSL2/ADSL Annex A |
A2pvC030h1.d22k |
CO5 |
| Telecom Italia |
EHWIC-VA-DSL-A |
ADSL/ADSL2/ADSL2+ Annex A |
A2pv6C033c.d23e |
- |
Links to V/ADSL Firmware Release Notes
Please refer to the following release notes for links to V/ADSL:
● 32B: http://www.cisco.com/c/en/us/td/docs/routers/access/800/firmware/release/notes/VDSL2/fwrnd23b.html
● 35D: http://www.cisco.com/c/en/us/td/docs/routers/access/800/firmware/release/notes/VDSL2/fwrn35d.html
● 35I: http://www.cisco.com/c/en/us/td/docs/routers/access/800/firmware/release/notes/VDSL2/fwrn35l.html
● 38H: http://www.cisco.com/c/en/us/td/docs/routers/access/800/firmware/release/notes/VDSL2/fwrn38h.html
● 38K: http://www.cisco.com/c/en/us/td/docs/routers/access/800/firmware/release/notes/VDSL2/fwrn38k1.html
Feedback