The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15524
Cisco announces the end-of-sale and end-of-life dates for the Cisco 10G DWDM Fixed-Wavelength Transceiver Module. The last day to order the affected product(s) is April 22, 2025. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Milestones and Dates for the Cisco 10G DWDM Fixed-Wavelength Transceiver Module
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
October 22, 2024 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
April 22, 2025 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
July 21, 2025 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
April 22, 2026 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
April 22, 2026 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
July 18, 2029 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
April 30, 2030 |
Table 2. Product Part Numbers Affected by This Announcement
| End-of-Sale Product Part Number |
Product Description |
| DWDM-SFP10G-30.33= |
10GBASE-DWDM 1530.33 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-31.12= |
10GBASE-DWDM 1531.12 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-31.90= |
10GBASE-DWDM 1531.90 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-32.68= |
10GBASE-DWDM 1532.68 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-33.47= |
10GBASE-DWDM 1533.47 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-34.25= |
10GBASE-DWDM 1534.25 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-35.04= |
10GBASE-DWDM 1535.04 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-35.82= |
10GBASE-DWDM 1535.82 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-36.61= |
10GBASE-DWDM 1536.61 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-37.40= |
10GBASE-DWDM 1537.40 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-38.19= |
10GBASE-DWDM 1538.19 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-38.98= |
10GBASE-DWDM 1538.98 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-39.77= |
10GBASE-DWDM 1539.77 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-40.56= |
10GBASE-DWDM 1540.56 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-41.35= |
10GBASE-DWDM 1541.35 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-42.14= |
10GBASE-DWDM 1542.14 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-42.94= |
10GBASE-DWDM 1542.94 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-43.73= |
10GBASE-DWDM 1543.73 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-44.53= |
10GBASE-DWDM 1544.53 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-45.32= |
10GBASE-DWDM 1545.32 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-46.12= |
10GBASE-DWDM 1546.12 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-46.92= |
10GBASE-DWDM 1546.92 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-47.72= |
10GBASE-DWDM 1547.72 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-48.51= |
10GBASE-DWDM 1548.51 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-49.32= |
10GBASE-DWDM 1549.32 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-50.12= |
10GBASE-DWDM 1550.12 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-50.92= |
10GBASE-DWDM 1550.92 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-51.72= |
10GBASE-DWDM 1551.72 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-52.52= |
10GBASE-DWDM 1552.52 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-53.33= |
10GBASE-DWDM 1553.33 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-54.13= |
10GBASE-DWDM 1554.13 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-54.94= |
10GBASE-DWDM 1554.94 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-55.75= |
10GBASE-DWDM 1555.75 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-56.55= |
10GBASE-DWDM 1556.55 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-57.36= |
10GBASE-DWDM 1557.36 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-58.17= |
10GBASE-DWDM 1558.17 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-58.98= |
10GBASE-DWDM 1558.98 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-59.79= |
10GBASE-DWDM 1559.79 nm SFP10G (BUILD-TO-ORDER) |
| DWDM-SFP10G-60.61= |
10GBASE-DWDM 1560.61 nm SFP10G (100-GHz ITU grid) |
| DWDM-SFP10G-61.41= |
10GBASE-DWDM 1561.41 nm SFP10G (100-GHz ITU grid) |
There is no replacement available for the Cisco 10G DWDM Fixed-Wavelength Transceiver Module at this time.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco 10G DWDM Fixed-Wavelength Transceiver Module through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For more information about the Cisco End-of-Life Policy, go to:
https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.