EOS and EOL Announcement for the 16-Port 10/100 Ethernet Modules and Gigabit Ethernet Daughter Card for Cisco 2600/2800/2900/3600/3700/3800/3900 Series Routers
PDF(125.6 KB) View with Adobe Reader on a variety of devices
Updated:March 13, 2015
Document ID:1457309031178890
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL7259
Cisco announces the end-of-sale and end-of life dates for the 16-Port 10/100 Ethernet Modules and Gigabit Ethernet Daughter Card for Cisco 2600/2800/2900/3600/3700/3800/3900 Series Routers. The last day to order the affected product(s) is November 15, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the 16-Port 10/100 Ethernet Modules and Gigabit Ethernet Daughter Card for Cisco 2600/2800/2900/3600/3700/3800/3900 Series Routers
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
November 15, 2010
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
November 15, 2011
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
February 13, 2012
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
November 14, 2014
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
November 14, 2012
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
November 14, 2012
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
February 13, 2016
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
November 30, 2016
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
Additional Information
GE-DCARD-ESW
1 GE (1000BaseT) daughtercard for Etherswitch Modules
See the Product Migration Options section below for detailed information on replacing this product.
GE-DCARD-ESW=
1 1000BaseT daughtercard for Etherswitch NM
See the Product Migration Options section below for detailed information on replacing this product.
NM-16ESW
1 16 port 10/100 EtherSwitch NM
See the Product Migration Options section below for detailed information on replacing this product.
NM-16ESW-1GIG
1 16 port 10/100 EtherSwitch NM with 1 GE (1000BaseT) port
See the Product Migration Options section below for detailed information on replacing this product.
NM-16ESW-1GIG=
1 16 port 10/100 EtherSwitch NM + 1 Gig Port
See the Product Migration Options section below for detailed information on replacing this product.
NM-16ESW=
1 16 port 10/100 EtherSwitch NM
See the Product Migration Options section below for detailed information on replacing this product.
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to:
http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.